Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NLAST4053QSR by Onsemi is a CMOS multiplexer with 3 functions, 2 channels, and 16 terminals. It operates b/w -55 to 125 °C and has a max on-state resistance of 37 ohm. Ideal for military-grade applications requiring small outline packages with shrink pitch technology.
Median Price
$0.384
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
$0.370
1k+ parts
$0.307
10k+ parts
$0.274
DigiKey
$0.460
Verical
$0.342
Digiode
$0.288
Chip Stock
Vyrian
Corphita
$0.273
Vigor
$0.290
Corohmni
$0.303
AZTECH Wire
$16.300
Kepictronics
Continental Prestige Electronics
$0.265
Authorized Procurement Solutions
Kulean Microsystems
TANS Electronics
SupplyDigital Components
Problanco Electronics
Microchip USA
UHIMA Technologies
The plastic/epoxy material provides durability and protection to the internal components of the multiplexer, ensuring a long lifespan.
Being surface mountable makes it easier to integrate this multiplexer into electronic circuits, saving space and simplifying assembly.
With multiple functions, this multiplexer can handle complex switching tasks efficiently, making it versatile for various applications.
Operating at a nominal supply voltage of 3V makes it suitable for low power applications, reducing energy consumption.
The high maximum operating temperature ensures reliable performance even in harsh environmental conditions.
CMOS technology offers low power consumption, high noise immunity, and fast switching speeds, making the multiplexer efficient and reliable.
Having two channels allows for dual signal processing, increasing the versatility and functionality of the multiplexer.
Multiplexers & Switches NLAST4053QSR attributes and parameters. Explore more Multiplexers & Switches devices from Onsemi
Other IC type:
JESD-30 Code:
Length:
Maximum Negative Supply Voltage (Vsup):
Minimum Negative Supply Voltage (Vsup):
Nominal Negative Supply Voltage (Vsup):
No. of Channels:
No. of Functions:
No. of Terminals:
Nominal Off-state Isolation:
Nominal On-state Resistance Match:
Maximum On-state Resistance (Ron):
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Qualification:
Maximum Seated Height:
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage (Vsup):
Surface Mount:
Maximum Switch-off Time:
Maximum Switch-on Time:
Technology:
Temperature Grade:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width (mm):
NLAST4053QSR Other Function Semiconductors trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Obsolescence/ EOL - Multiple Devices 20/Sept/2004
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
BAV99
Kec
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
KYOCERA AVX
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/58-360
Carlisle Interconnect Technologies
GENERAL CONN ACCESSORY; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; Maximum Operating Temperature: 200 Cel; MIL-Connector Accessory: CONTACT; Terminal Type: CRIMP; MIL Conformity: YES;
1N4148
New Jersey Semiconductor Products
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
CRCW06031K00FKEAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
NC7WZ07P6X
Fairchild Semiconductor
BUFFER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;
DRV5053VAQLPG
Texas Instruments
Texas Instruments DRV5053VAQLPG is a magnetic field sensor with 2.5-38V supply voltage range, -40 to 125°C operating temperature, and 0-2V output. Ideal for applications requiring Hall effect sensors like automotive, industrial automation, and robotics due to its compact size (1.52" x 4mm) and high output current capability of 2.3A.
M85049/85-08W02
Glenair
CONNECTOR ACCESSORY; MIL Conformity: YES; Material: ALUMINIUM ALLOY; Associated Backshell Military - Specifications: MIL-DTL-38999; Shell Sizes: 08; DIN Conformity: NO;
2N2222A
Good-ark Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): 1.8 W; Maximum Collector Current (IC): .8 A;
LM555CM
National Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
CL31B104KBCNNNC
Samsung Electro-mechanics
Samsung Electro-mechanics CL31B104KBCNNNC is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It features X7R temperature characteristics, -55 to 125 °C operating range, and compact SMT package style. Ideal for applications requiring high reliability in compact electronic devices.
Dc Components
EU2B-YS2J03C
Idec
ROTARY SWITCH;
Itt Components
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .15 A;
Intersil
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
NXP Semiconductors
LL4148
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Zetex Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
International Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
SS14
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ADG801BRTZ-500RL7
Analog Devices
ADG801BRTZ-500RL7 by Analog Devices is a SPST switch with 0.6 ohm Ron, 55 ns switch-on time, and 61 dB isolation. Ideal for automotive applications due to its CMOS technology, low profile design, and wide operating temperature range from -40 to 125 °C.
ADG1604BRUZ-REEL
ADG1604BRUZ-REEL by Analog Devices is a 4-channel single-ended multiplexer with 1.2 ohm max on-state resistance and 177 ns switch-on time. It operates in automotive-grade temperature range (-40 to 125 °C) and has a small outline package suitable for surface mount applications. Ideal for signal switching in automotive electronics due to its low on-state resistance and fast switching speed.
ADG1404YRUZ
ADG1404YRUZ by Analog Devices is a CMOS single-ended multiplexer with 4 channels. It operates at a supply voltage range of ±15/+12/±5 V and offers a max on-state resistance of 4 ohm. Ideal for automotive applications, this switch has a small outline package style and can handle temperatures from -40 to 125°C.
CD74HC4051E
Rca Solid State
SINGLE-ENDED MULTIPLEXER; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
ADV3201ASWZ
ADV3201ASWZ by Analog Devices is a 32-channel cross point switch with 3.3V nominal voltage, -40 to 85°C operating temperature range, and 90dB off-state isolation. It comes in a square plastic/epoxy package with 176 terminals for industrial applications requiring separate outputs and low profile design.
ADG5404BRUZ
ADG5404BRUZ by Analog Devices is a CMOS multiplexer with 4 channels, operating at -40 to 125 °C. It has a max on-state resistance of 16 ohm and switching voltage of +-9/+-22/9/40 V. Ideal for automotive applications due to its small size, low power consumption, and high isolation level.
TMUX6112PWR
TMUX6112PWR by Texas Instruments is a 4-channel SPST multiplexer with a max on-state resistance of 245 ohm. Operating temperature ranges from -40 to 125 °C, making it suitable for automotive applications. With a nominal bandwidth of 800 kHz and compact dimensions (5mm x 4.4mm), it's ideal for high-speed signal switching in tight spaces.
HMC8038LP4CE
Analog Devices' HMC8038LP4CE is a 16-terminal SPDT multiplexer with a nominal voltage of 3.3V, operating b/w -40 to 105°C. This square-shaped chip carrier has a very thin profile and matte tin finish, suitable for industrial applications requiring high-temperature operation and compact design.
DG508A-CJ
Thomson Consumer Electronics
Thomson Consumer Electronics' DG508A-CJ is an 8-channel single-ended multiplexer with a max on-state resistance of 400 ohm. Operating at +-15V power supplies, it features a switching time of 1500 ns and CMOS technology. The package style is in-line with a ceramic body material, making it suitable for applications requiring high-speed signal routing.
ADG884BRMZ
ADG884BRMZ by Analog Devices is a CMOS audio/video switch with 2 functions, 0.5 ohm Ron, and 60 dB isolation. It operates b/w -40 to 85 °C and has a supply voltage range of 1.8V to 5.5V. Ideal for industrial applications requiring fast switching times and low on-state resistance.
ADG1414BRUZ
ADG1414BRUZ by Analog Devices is an 8-function SPST multiplexer with a max on-state resistance of 25 ohm. Operating at -40 to 125 °C, it has a switching time of 320 ns and offers 70 dB isolation. Ideal for automotive applications, this CMOS technology-based switch supports supply voltages from +-5 to +-15 V in a small outline package.
CD4052BE
DIFFERENTIAL MULTIPLEXER; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
CD74HC4052M96
CD74HC4052M96 by Texas Instruments is a CMOS differential multiplexer with 2 channels. It operates at -55 to 125 °C and has a max on-state resistance of 270 ohm. With a nominal bandwidth of 200 kHz, it is ideal for military-grade applications requiring high-speed signal switching.
ADG5434BRUZ-REEL7
ADG5434BRUZ-REEL7 by Analog Devices is a SPDT multiplexer with 4 functions, operating at -40 to 125 °C. It has a max on-state resistance of 15 ohm and switching voltage of +-9/+-22/9/40 V. Ideal for automotive applications due to its compact size, low power consumption, and high isolation levels.
MAX313FEPE
Maxim Integrated
MAX313FEPE by Maxim Integrated is a 4-function multiplexer with 16 terminals, operating at -40 to 85°C. It features a max on-state resistance of 10 ohm and switching voltage of 12/+-15 V. Ideal for industrial applications requiring high isolation and fast switch-on/off times in a compact IN-LINE package.
General Electric Solid State
SINGLE-ENDED MULTIPLEXER; Temperature Grade: MILITARY; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
CD4066BE
SPST; Temperature Grade: INDUSTRIAL; No. of Terminals: 14; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
CD4066BPWR
CD4066BPWR by Texas Instruments is a CMOS SPST switch with 4 channels, 1300 ohm Ron, and 40 kHz bandwidth. It operates at -55 to 125 °C, with a supply voltage range of 3-18 V. Ideal for military-grade applications requiring low on-state resistance and high bandwidth in a compact SOT package.
ADG408BRZ
ADG408BRZ by Analog Devices is an 8-channel single-ended multiplexer with a max on-state resistance of 100 ohm and switching voltage of +-15 V. It operates in industrial temperature range, making it suitable for applications requiring precise signal routing in harsh environments.
CD74HC4053PWRG4
CD74HC4053PWRG4 by Texas Instruments is a CMOS technology-based multiplexer with 3 channels, offering a max bandwidth of 180 kHz. It operates within a temperature range of -55 to 125 °C and has a low on-state resistance of 130 ohm. Ideal for applications requiring signal switching in military-grade environments.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NLASB3157DFT2G
Onsemi
NLASB3157DFT2G by Onsemi is a SPDT switch with 6 terminals, operating b/w -55 to 125 °C. It has a max on-state resistance of 15 ohm and offers 57 dB off-state isolation. Ideal for military-grade applications requiring fast switching times and low power consumption.
NLAS4157DFT2G
NLAS4157DFT2G by Onsemi is a SPDT switch with 6 terminals, operating from -40 to 85°C. It has a low on-state resistance of 4 ohm and provides 52 dB isolation. Ideal for industrial applications requiring fast switching times and high reliability in a compact package.
NLASB3157DFT2GH
SPDT; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Peak Reflow Temperature (C): NOT SPECIFIED;
NLAS4684MR2G
SPDT; Temperature Grade: MILITARY; No. of Terminals: 10; Package Code: TSSOP; Package Shape: SQUARE; Surface Mount: YES;
NLAST4599DTT1G
SPDT; Temperature Grade: MILITARY; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
NLAS4599DTT1G
NLAS4684FCT1G
NLAS4684FCT1G by Onsemi is a SPDT switch with 2 functions, operating at -55 to 125 °C. It has a low on-state resistance of 1 ohm and provides 65 dB isolation. Ideal for military-grade applications requiring fast switching times and precise control in compact spaces.
NLAS4684MNR2G
SPDT; Temperature Grade: MILITARY; No. of Terminals: 10; Package Code: HVSON; Package Shape: SQUARE; Surface Mount: YES;
NLAS5223BMNR2G
SPDT; Temperature Grade: INDUSTRIAL; No. of Terminals: 10; Package Code: VQCCN; Package Shape: RECTANGULAR; Surface Mount: YES;
NLAS4599DFT2G
NLAST4051DTR2G
SINGLE-ENDED MULTIPLEXER; Temperature Grade: MILITARY; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
NLAS5123MNR2G
SPDT; Temperature Grade: INDUSTRIAL; No. of Terminals: 6; Package Code: VSON; Package Shape: RECTANGULAR; Surface Mount: YES;
NLAST4599DFT2G
NLAST4599DFT2G by Onsemi is a SPDT multiplexer with 6 terminals, operating at -55 to 125°C. It has a supply voltage range of 2-5.5V and offers fast switching times of 25ns on and 15ns off. Ideal for military-grade applications requiring high isolation (93dB) in a compact SOT package.
NLAS4053DR2G
NLAS4053DR2G by Onsemi is a CMOS multiplexer with 3 functions. It has a small outline package style and operates at temperatures ranging from -55 to 125 °C. This device is commonly used in military applications due to its temperature grade and compact size.
NLAS5223BLMNR2G
NLAS3899BMNTBG
DPDT; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: VQCCN; Package Shape: RECTANGULAR; Surface Mount: YES;
NLAS4783BMN1R2G
SPDT; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES;
NLAS1053USG
NLAS1053USG by Onsemi is a CMOS single-ended multiplexer with 2 channels. It operates at temperatures from -55 to 125 °C and has a max supply voltage of 5.5 V. With a nominal off-state isolation of 93 dB, it is ideal for military-grade applications requiring precise signal switching in compact spaces.
NLAS323USG
SPST; Temperature Grade: MILITARY; No. of Terminals: 8; Package Code: VSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
NLAS2066USG
NLAS2066USG by Onsemi is a CMOS SPST switch with 2 functions, operating at -55 to 125 °C. It has a max on-state resistance of 50 ohm and nominal off-state isolation of 73 dB. Ideal for military-grade applications requiring fast switching times and low power consumption.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved