Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MC14066BDR2G by Onsemi is a CMOS SPST multiplexer with 4 functions, operating at -55 to 125°C. It has a supply voltage range of 3-18V and offers separate outputs with an on-state resistance of 1050 ohm. Ideal for military-grade applications requiring high isolation and fast switching times.
Median Price
$0.294
Lifecycle Status
Suppliers In-Stock
43
In-Stock Inventory
1k+
Adafruit Industries
1+ parts
$0.232
100+ parts
$0.220
1k+ parts
10k+ parts
-
Mouser Electronics
$0.490
$0.265
$0.240
Newark
$0.505
$0.277
$0.225
DigiKey
$0.510
$0.235
EBV Elektronik
Arrow
$0.174
Verical
Future Electronics
$0.295
Rochester
$0.255
$0.212
$0.189
Master Electronics
$0.292
$0.224
$0.218
Chip1Stop
$0.320
$0.199
$0.173
Farnell
$0.228
$0.192
Element14
$0.719
$0.683
Flip Electronics (Authorized)
Ozdisan Elektronik
$0.172
Digiode
$0.208
Nova Conductors
$0.238
Maritex
$0.282
$0.150
$0.141
$0.128
NAC Semi
$0.446
IBS Electronics
$0.252
$0.242
$0.233
Bristol Electronics
Chip Stock
Vyrian
Atlantic Semiconductor
ComSIT Distribution GmbH
Dan-Mar Components
Flip Electronics
Flex Direct, LLC
Microfarads
LWI Electronics Inc
ACDS - Activité Composants Distribution Service
Semi Source
Micros
Partservice
$0.260
Sea View Technologies
Micros sp.j. W. Kędra i J. Lic
$0.279
Component Sense
Cyclops Electronics Ltd
LIBRA Elektronik GmbH
Velocity Electronics
Sogenti Electronics
Cogito LLC
South Electronics
Semicontronic
$0.119
$0.116
$0.115
Ampacity Inc.
$0.161
Corohmni
Corphita
$0.197
Argo Parts USA
Advanced Electronics
Netroflash
Continental Prestige Electronics
$0.538
$0.299
$0.183
$0.144
Aztec Data Supply Inc.
$3.262
Perfect Parts
Authorized Procurement Solutions
RC Electronics
$0.230
Infinite Electronics LLP (Excess)
GreenTree Electronics
Eastek
Metaverse IC Inc.
QUARKTWIN TECHNOLOGY LTD
Kepictronics
Lixinc
Formix International (Excess)
TANS Electronics
Assy Fe
A-Z Elektronik GmbH
Problanco Electronics
Kulean Microsystems
SupplyDigital Components
Futuretech Components
S.R.D Solutions
Allen Electronics Distributors
$0.268
$0.204
UHIMA Technologies
ChipstoGo Electronic ltd
This material is lightweight and durable, making the product easy to handle and resistant to damage.
Allows for easy installation onto circuit boards, saving time and effort during assembly.
Provides versatility and flexibility in routing signals for different applications.
Suitable for use in standard electronic systems with a 5V power supply.
Can withstand high temperatures, making it suitable for a wide range of operating conditions.
Meets strict military standards for reliability and performance in harsh environments.
CMOS technology offers low power consumption and high noise immunity, enhancing the efficiency of the product.
Multiplexers & Switches MC14066BDR2G attributes and parameters. Explore more Multiplexers & Switches devices from Onsemi
Other IC type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
Normal Position (V):
No. of Channels:
No. of Functions:
No. of Terminals:
Nominal Off-state Isolation:
Nominal On-state Resistance Match:
Maximum On-state Resistance (Ron):
Maximum Operating Temperature:
Minimum Operating Temperature:
Output (V):
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage (Vsup):
Surface Mount:
Maximum Switch-off Time:
Maximum Switch-on Time:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width (mm):
MC14066BDR2G Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Assembly/Origin - SOIC14,16 LF 19/Sep/2023
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
FSMLF327
Fox Electronics
FSMLF327 by Fox Electronics is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing such as communication systems, industrial automation, and consumer electronics. Operating temperature range from -40 to 85 °C.
1N4148
Bkc Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMBJ18CA
Pro-an Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Polarity: BIDIRECTIONAL; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
BAV99
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Promax-johnton
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Terminal Form: GULL WING; Maximum Drain-Source On Resistance: 7.5 ohm; Minimum DS Breakdown Voltage: 60 V;
Nexperia
Meritek Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FDV303N
Onsemi
FDV303N by Onsemi is a N-CHANNEL FET with 25V DS Breakdown Voltage, 0.68A Drain Current, and 0.45 ohm On Resistance. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE at temperatures ranging from -55 to 150°C. Package style is SMALL OUTLINE with GULL WING terminals for surface mount assembly.
2N2222A
Crimson Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SS14
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
NE555D
NXP Semiconductors
SQUARE; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
BSS138LT3G
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
ERJ3EKF1002V
Panasonic
Panasonic's ERJ3EKF1002V is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
LL4148
Itt Components
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .005 us; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Non Repetitive Peak Forward Current: 1 A;
BAT54SLT1G
BAT54SLT1G by Onsemi is a fast recovery Schottky diode with 2 elements in series connected configuration. It has a max reverse recovery time of 0.005 us and a max forward voltage of 0.8 V. Ideal for applications requiring high-speed rectification, it operates b/w -55 to 150 °C and can handle a max output current of 0.2 A.
Pulse Electronics
Aeroflex/metelics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Package Shape: ROUND; Transistor Application: SWITCHING;
Leshan Radio
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Forward Voltage (VF): .5 V;
MIXER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
CD4051BM96
Texas Instruments
CD4051BM96 by Texas Instruments is a CMOS single-ended multiplexer with 16 terminals. It operates at temperatures from -55 to 125 °C and has a max supply current of 3 mA. Ideal for applications requiring separate output, it offers a nominal bandwidth of 20 kHz and on-state resistance of 1050 ohm.
TMUX6112PWR
TMUX6112PWR by Texas Instruments is a 4-channel SPST multiplexer with a max on-state resistance of 245 ohm. Operating temperature ranges from -40 to 125 °C, making it suitable for automotive applications. With a nominal bandwidth of 800 kHz and compact dimensions (5mm x 4.4mm), it's ideal for high-speed signal switching in tight spaces.
DG412DYZ-T
Renesas Electronics
Renesas Electronics' DG412DYZ-T is a CMOS SPST switch with 4 functions, 35 ohm Ron, and 175 ns switch-on time. Ideal for industrial applications requiring a small outline package, it operates b/w -40 to 85 °C with a supply voltage range of +/-5V to +/-15V.
FSA4157AP6X
SPDT; Temperature Grade: INDUSTRIAL; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
CD4051BNSR
CD4051BNSR by Texas Instruments is a CMOS single-ended multiplexer with 16 terminals and a supply voltage range of 3-20V. It features a max on-state resistance of 1050 ohm, switching time of 720 ns, and operates in temperatures from -55 to 125°C. Ideal for military-grade applications requiring high isolation and low signal current.
DG403DYZ
Rochester Electronics
SPDT; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
MPC506AUG4
The Texas Instruments MPC506AUG4 is a CMOS single-ended multiplexer with 28 terminals in a small outline package. It operates at temperatures ranging from -40 to 85 °C and has a max on-state resistance of 1800 ohm. Ideal for industrial applications requiring common output switching with a supply current of up to 1.5 mA.
TS5A3166DBVRE4
TS5A3166DBVRE4 by Texas Instruments is a SPST switch with 1.8/5 V supplies, 3.4 ohm Ron, and 200 kHz bandwidth. It is ideal for industrial applications requiring low-profile switches with separate outputs and high off-state isolation. The switch operates b/w -40 to 85 °C and has a compact design suitable for surface mount PCBs.
TS5A23159DGSR
TS5A23159DGSR by Texas Instruments is a 2-channel SPDT switch with 1.8/5 V power supplies, 3.5 ohm Ron, and 105 kHz bandwidth. Ideal for industrial applications requiring separate outputs and high isolation levels. Package style: small outline, thin profile, shrink pitch; terminal finish: nickel palladium gold.
DG419DY-T1
Vishay Intertechnology
Vishay Intertechnology's DG419DY-T1 is a SPDT CMOS switch with 35 ohm Ron, suitable for industrial applications. It operates at -40 to 85 °C and has a peak reflow temp of 240 C. With a small outline package style, it features dual terminals and break-before-make switching for precise signal routing in compact designs.
CD74HC4067SM96
CD74HC4067SM96 by Texas Instruments is a CMOS multiplexer with 24 terminals, operating from -55 to 125 °C. It has a max on-state resistance of 270 ohm and nominal bandwidth of 89 kHz. Ideal for military-grade applications requiring common output switching with low signal current (0.025 A) and high off-state isolation (75 dB).
TS5A23159RSER
TS5A23159RSER by Texas Instruments is a SPDT switch with 2 functions, operating at -40 to 85°C. It has a nominal voltage of 1.8V and max on-state resistance of 3.5 ohm. Ideal for industrial applications requiring low power consumption and high isolation levels in a compact chip carrier package.
ADG1208YRUZ-REEL7
Analog Devices
ADG1208YRUZ-REEL7 by Analog Devices is a CMOS single-ended multiplexer with 8 channels. It operates at a max supply voltage of ±16.5V and has a max on-state resistance of 200 ohm. With a temperature grade of automotive, it is suitable for applications requiring high-speed switching in harsh environments.
74HC4051D,653
NXP Semiconductors' 74HC4051D,653 is an 8-channel CMOS multiplexer with a max supply voltage of 10V. It features a peak reflow temperature of 260°C and a nominal off-state isolation of 50dB. Ideal for automotive applications due to its small outline package and dual terminal position.
MC74HC4852ADTR2G
MC74HC4852ADTR2G by Onsemi is a CMOS differential multiplexer with 4 channels. It operates at -55 to 125 °C, with Vsup ranging from 2-6V. With a max on-state resistance of 1300 ohm and switching type as break-before-make, it's ideal for military-grade applications requiring precise signal routing.
SN74LV4053APWR
SN74LV4053APWR by Texas Instruments is a CMOS multiplexer with 3 functions, operating at a supply voltage range of 2-5.5V. With a max on-state resistance of 225 ohm and off-state isolation of 45 dB, it's ideal for industrial applications requiring high-speed switching in compact designs.
ADG719BRMZ-REEL7
ADG719BRMZ-REEL7 by Analog Devices is an 8-terminal SPDT switch with 3V nominal voltage, 12 ohm max on-state resistance, and 67dB off-state isolation. Ideal for automotive applications due to its CMOS technology, -40 to 125°C operating range, and small outline package style.
HEF4051BT-Q100,118
HEF4051BT-Q100,118 by NXP Semiconductors is an AEC-Q100 qualified CMOS multiplexer with 8 channels. It operates at temperatures from -40 to 125°C and has a max on-state resistance of 2500 ohm. Ideal for automotive applications due to its low supply current of 0.6 mA and break-before-make switching feature.
PCA9546AD,118
PCA9546AD,118 by NXP Semiconductors is a 16-terminal multiplexer with 4 channels. It operates b/w -40 to 85°C and supports a supply voltage range of 2.3V to 3.6V. Ideal for industrial applications requiring small outline packages and separate outputs.
5962-89710013X
Defense Logistics Agency
SINGLE-ENDED MULTIPLEXER; Temperature Grade: MILITARY; No. of Terminals: 28; Package Code: QCCN; Package Shape: SQUARE; Surface Mount: YES;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ADG1412YRUZ-REEL7
ADG1412YRUZ-REEL7 by Analog Devices is a 4-function SPST multiplexer with 16 terminals. It operates at -40 to 125 °C, with a max seated height of 1.2 mm and on-state resistance of 5.4 ohm. Ideal for automotive applications requiring CMOS technology and high isolation levels.
MC14051BDR2G
MC14051BDR2G by Onsemi is a CMOS single-ended multiplexer with 8 channels. It operates at a supply voltage range of 3-18V and offers a max on-state resistance of 1050 ohm. This small outline IC, suitable for military applications, has a temperature range from -55 to 125°C and features break-before-make switching technology.
SINGLE-ENDED MULTIPLEXER; Temperature Grade: MILITARY; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
MC14051BDG
MC14051BDG by Onsemi is a CMOS single-ended multiplexer with 8 channels. It operates at temperatures from -55 to 125 °C and has a max supply voltage of 18 V. With a nominal off-state isolation of 50 dB, it is ideal for applications requiring precise signal switching in military-grade environments.
MC14051BDTR2G
MC14051BDTR2G by Onsemi is a CMOS single-ended multiplexer with 8 channels. It operates at temperatures from -55 to 125 °C and has a max supply voltage of 18 V. With a nominal off-state isolation of 50 dB, it is ideal for military-grade applications requiring precise signal switching within a compact thin profile package.
MC14067BDWG
MC14067BDWG by Onsemi is a 24-terminal CMOS multiplexer with 16 channels. It operates at temperatures ranging from -55 to 125 °C and has a max supply voltage of 18 V. With a small outline package style, it is ideal for military-grade applications requiring high on-state resistance match and off-state isolation.
MC14066BDTR2G
MC14066BDTR2G by Onsemi is a CMOS SPST multiplexer with 4 functions, operating at -55 to 125 °C. It has a supply voltage range of 3-18 V and offers separate outputs with an on-state resistance of 1050 ohm. Ideal for military-grade applications requiring high isolation and fast switching times.
MC14066BDG
MC14066BDG by Onsemi is a CMOS SPST multiplexer with 4 functions, operating at -55 to 125 °C. It has a supply voltage range of 3-18 V and offers separate outputs with an on-state resistance of 1050 ohm. Ideal for military-grade applications requiring high isolation and fast switching times.
MC14052BDG
MC14052BDG by Onsemi is a CMOS differential multiplexer with 4 channels. It operates at temperatures from -55 to 125 °C and has a max supply voltage of 18 V. With a nominal off-state isolation of 50 dB, it is ideal for military-grade applications requiring precise signal switching within a compact small outline package.
MC14053BDG
MC14053BDG by Onsemi is a CMOS multiplexer with 3 functions, operating at -55 to 125 °C. It has a max supply voltage of 18 V and peak reflow temperature of 260 C. Ideal for military-grade applications requiring small outline packages and low on-state resistance.
MC14066BDTR2
SPST; Temperature Grade: MILITARY; No. of Terminals: 14; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
MC14066BD
Motorola
SPST; Temperature Grade: MILITARY; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
MC14066BD by Onsemi is a 4-function multiplexer with 14 terminals, operating at supply voltages of 3-18V. It features a max on-state resistance of 1050 ohm and offers separate outputs. This CMOS technology IC is suitable for military-grade applications requiring high isolation and low resistance match.
MC14052BDR2G
MC14052BDR2G by Onsemi is a CMOS differential multiplexer with 4 channels. It operates at temperatures from -55 to 125 °C and has a max supply voltage of 18 V. With a nominal off-state isolation of 50 dB, it is suitable for military-grade applications requiring precise signal switching in compact designs.
MC14066BDTEL
MC14066BDT
MC14066BDR2
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved