Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SPDT; Temperature Grade: INDUSTRIAL; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Median Price
$0.243
Lifecycle Status
Suppliers In-Stock
19
In-Stock Inventory
1k+
Rochester
1+ parts
$0.231
100+ parts
$0.217
1k+ parts
$0.196
10k+ parts
-
Newark
$0.405
$0.252
$0.230
$0.221
Mouser Electronics
$0.420
$0.275
$0.263
Adafruit Industries
$14.044
$13.342
DigiKey
Arrow
$0.248
RS (Exports)
$0.226
Chip1Stop
$0.197
$0.146
$0.128
Verical
$0.242
$0.210
$0.205
Digiode
$0.061
Nova Conductors
$0.306
Mobius Materials
$0.699
$0.561
Semtec, LLC
Chip Stock
Cyclops Electronics Ltd
Vyrian
NAC Semi
$0.233
Flip Electronics
Speed Components Ltd
Ampacity Inc.
$0.054
Semicontronic
$0.053
$0.052
Corphita
$0.058
Corohmni
$0.064
Argo Parts USA
$0.296
Continental Prestige Electronics
$0.622
$0.354
$0.229
Microchip USA
$1.659
Advanced Electronics
Aztec Data Supply Inc.
$16.033
Modulus Dynamics
$19.071
Perfect Parts
RC Electronics
$0.300
$0.270
$0.260
Glotronic Ltd.
A-Z Elektronik GmbH
SupplyDigital Components
Kulean Microsystems
Alle Elektronik GmbH
Lixinc
TANS Electronics
Kepictronics
Authorized Procurement Solutions
Problanco Electronics
Assy Fe
Supply Digital
Futuretech Components
Netroflash
$0.299
$0.290
$0.284
GreenTree Electronics
UHIMA Technologies
Multiplexers & Switches FSA5157P6X attributes and parameters. Explore more Multiplexers & Switches devices from Fairchild Semiconductor
Other IC type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Channels:
No. of Functions:
No. of Terminals:
Nominal Off-state Isolation:
Nominal On-state Resistance Match:
Maximum On-state Resistance (Ron):
Maximum Operating Temperature:
Minimum Operating Temperature:
Output (V):
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage (Vsup):
Surface Mount:
Maximum Switch-off Time:
Maximum Switch-on Time:
Switching (V):
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width (mm):
FSA5157P6X Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Design/Specification - Marking Change 07/Oct/2022 Marking Change 17/Nov/2021
PCN Assembly/Origin - FSAx157x6X 07/Oct/2022
PCN Packaging - Mult Devices 24/Oct/2017 Binary Year Code Marking 15/Jan/2014
In 2016 Fairchild was acquired by ON Semiconductor (after 2022, onsemi). Fairchild Semiconductor International, Inc. was an American semiconductor company based in San Jose, California. Founded in 1957 as a division of Fairchild Camera and Instrument, it became a pioneer in the manufacturing of transistors and of integrated circuits. Schlumberger bought the firm in 1979 and sold it to National Semiconductor in 1987; Fairchild was spun off as an independent company again in 1997. In September 2016, Fairchild was acquired by ON Semiconductor. The company had locations in the United States at San Jose, California; San Rafael, California; South Portland, Maine; West Jordan, Utah; and Mountaintop, Pennsylvania. Outside the US it operated locations in Australia;[4] Singapore; Bucheon, South Korea; Penang, Malaysia; Suzhou, China; and Cebu, Philippines, among others.
SMBJ18CA
Yangzhou Yangjie Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
2N7002
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Time At Peak Reflow Temperature (s): 30; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
2N2222A
Microchip Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum Operating Temperature: -65 Cel; Terminal Position: BOTTOM;
2N7002DWH6327XTSA1
Infineon Technologies
2N7002DWH6327XTSA1 by Infineon: N-CHANNEL FET with 60V DS Breakdown Voltage, 0.3A ID, and 3ohm RDS. Ideal for SWITCHING applications in small outline packages with GULL WING terminals.
STM32H743IIT6
STMicroelectronics
STM32H743IIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications due to its wide temperature range (-40°C to 85°C) and various connectivity options (CAN, I2C, UART, USB).
LM358N
Onsemi
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
ULN-2803A
Vishay Sprague
Vishay Sprague's ULN-2803A is an 8-bit peripheral driver with a max supply voltage of 3V. Featuring open-collector output characteristics, it offers built-in transient protections and operates b/w -20°C to 85°C. Ideal for applications requiring sink current flow direction, this rectangular-shaped driver has a terminal pitch of 2.54mm and turn-on/off time of 1us.
NE555/D
General Electric Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; Maximum Operating Temperature: 70 Cel; Technology: BIPOLAR; Package Equivalence Code: DIE OR CHIP; Qualification: Not Qualified;
CRCW06030000Z0EAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06030000Z0EAHP is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating temp range -55 to 155 °C, it's SMT package style makes it ideal for automotive applications meeting AEC-Q200 standard.
Forward International Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .6 A;
LL4148
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N5819HW-7-F
Diodes Incorporated
1N5819HW-7-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 1A output current, and 0.75V forward voltage. It's a surface mount device in a small outline package ideal for efficiency applications at temperatures ranging from -65 to 125°C.
USBLC6-2SC6
USBLC6-2SC6 by STMicroelectronics is a unidirectional transient voltage suppressor diode with a breakdown voltage of 6V. It has a max clamping voltage of 17V and operates in temperatures ranging from -40 to 125°C. This device, with dual terminals and matte tin finish, is ideal for protecting sensitive electronics from voltage spikes in various applications.
NXP Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Operating Temperature: 150 Cel;
1N4148
Microsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Changzhou Starsea Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MBRA340T3G
MBRA340T3G by Onsemi is a Schottky rectifier diode with 40V reverse test voltage and 3A max output current. Ideal for power applications, it operates b/w -55 to 150°C, features matte tin terminal finish, and comes in a small outline package.
NC7WZ17P6X
BUFFER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;
LM317TG
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Minimum Input-Output Voltage Differential: 3 V; Qualification Status: Not Qualified; No. of Functions: 1;
LM107H/883C
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Wideband: NO;
MAX355CWE+
Maxim Integrated
DIFFERENTIAL MULTIPLEXER; Temperature Grade: COMMERCIAL; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
HEF4051BTT,118
HEF4051BTT,118 by NXP Semiconductors is a CMOS single-ended multiplexer with 8 channels. It operates at a supply voltage range of 3-15V and offers fast switching times of 80ns on-state and 230ns off-state. This industrial-grade device in a small outline package is ideal for applications requiring precise signal routing in temperature-sensitive environments.
MPC506AU
Texas Instruments
The Texas Instruments MPC506AU is a single-ended multiplexer with 1 channel and a max on-state resistance of 1800 ohm. It operates at temperatures ranging from -40 to 85 °C and has a small outline package style. This multiplexer is commonly used in industrial applications requiring CMOS technology and a supply voltage of +-15 V.
ADG408BRZ-REEL7
Analog Devices
ADG408BRZ-REEL7 by Analog Devices is an 8-channel single-ended multiplexer with a max on-state resistance of 100 ohm and break-before-make switching. It operates in industrial temperature range from -40 to 85 °C, making it suitable for various applications requiring precise signal routing in harsh environments. The device features a small outline package style, matte tin terminal finish, and dual terminal position for easy integration into compact electronic systems.
ADG508AKNZ
Rochester Electronics
SINGLE-ENDED MULTIPLEXER; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
CD4051BE
Rca Solid State
ADG333ABRSZ
ADG333ABRSZ by Analog Devices is a 4-function SPDT multiplexer with a max supply current of 0.35mA. It operates at an industrial temperature grade range from -40 to 85°C and has a nominal voltage of ±15V. This small outline switch features separate outputs and break-before-make switching, making it ideal for various industrial applications requiring precise signal routing.
DG409DYZ-T
Renesas Electronics
The Renesas Electronics DG409DYZ-T is a CMOS differential multiplexer with 4 channels, 100 ohm max on-state resistance, and 150 ns switch-on/off time. It operates in industrial temperature range (-40 to 85 °C) and has a small outline package suitable for surface mount applications. Ideal for high-speed signal switching in various electronic systems.
ADG1636BCPZ-REEL7
ADG1636BCPZ-REEL7 by Analog Devices is a CMOS SPST switch with 2 functions, 16 terminals, and 1.2 ohm max on-state resistance. It operates at -40 to 125 °C and has a nominal voltage of 5 V. Ideal for automotive applications requiring high isolation and fast switching times.
CD4052BPWRE4
CD4052BPWRE4 by Texas Instruments is a CMOS differential multiplexer with 4 channels. It operates at temperatures ranging from -55 to 125°C and has a max supply voltage of 20V. With a package size of 5x4.4mm, it is suitable for military-grade applications requiring low power consumption and high on-state resistance match.
MUX36S16IRSNR
MUX36S16IRSNR by Texas Instruments is a CMOS single-ended multiplexer with 32 terminals, operating at -40 to 125 °C. It features a max on-state resistance of 430 ohm, switching time of 151 ns, and bandwidth of 500 kHz. Ideal for automotive applications due to its compact chip carrier package and low supply current of 0.062 mA.
TS5A23157DGSRG4
TS5A23157DGSRG4 by Texas Instruments is a 2-function SPDT switch with 10 terminals, operating at -40 to 85°C. It features a max on-state resistance of 140 ohm, peak reflow temp of 260°C, and nominal bandwidth of 220 kHz. Ideal for industrial applications requiring low power consumption and high isolation levels.
MC74HC4052ADG
DIFFERENTIAL MULTIPLEXER; Temperature Grade: MILITARY; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
CD74HC4067M
CD74HC4067M by Texas Instruments is a 24-terminal multiplexer with a supply voltage range of 2-6V. It features a max on-state resistance of 270 ohm, switching time of 60 ns, and bandwidth of 89 kHz. Ideal for military-grade applications requiring high-speed signal switching in compact designs.
FSUSB74UMX
DIFFERENTIAL MULTIPLEXER; Peak Reflow Temperature (C): 260; Terminal Finish: Nickel/Palladium/Gold (Ni/Pd/Au); Moisture Sensitivity Level (MSL): 1; Maximum Time At Peak Reflow Temperature (s): 30; JESD-609 Code: e4;
MPC508AU/1K
Burr-Brown Corporation
SINGLE-ENDED MULTIPLEXER; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
SN74LV4052APWR
SN74LV4052APWR by Texas Instruments is a CMOS differential multiplexer with 2 channels. It operates at a supply voltage range of 2V to 5.5V and offers a max on-state resistance of 225 ohm. With a nominal bandwidth of 50 kHz, it is ideal for industrial applications requiring high-speed signal switching in compact designs.
ADG5412FBRUZ-RL7
ADG5412FBRUZ-RL7 by Analog Devices is a 4-function SPST switch with a max on-state resistance of 11.2 ohm and nominal off-state isolation of 70 dB. It operates in automotive-grade temperatures (-40 to 125 °C) and is suitable for applications requiring separate output switching functions at supply voltages ranging from -22V to 22V.
DG407DYZ-T
Renesas Electronics DG407DYZ-T is an 8-channel differential multiplexer with a max on-state resistance of 100 ohm. It operates in industrial temperature range (-40 to 85 °C) and has a peak reflow temperature of 260 C. Suitable for various applications requiring precise signal switching in compact designs.
SN74LV4053AD
SN74LV4053AD by Texas Instruments is a CMOS multiplexer with 3 functions, operating at 2-5.5V. It features a max on-state resistance of 225 ohm and offers separate outputs. Ideal for industrial applications requiring high-speed switching with low power consumption.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FSA5157P6X
FSA5157P6X by Onsemi is a SPDT switch with 1.65-4.3V supply, 0.8 ohm Ron, and 75dB isolation. Ideal for industrial applications, it offers fast switching times of 65ns on and 40ns off in a compact package with dual terminals and separate outputs.
FSA5157L6X
SPDT; Temperature Grade: INDUSTRIAL; No. of Terminals: 6; Package Code: HVSON; Package Shape: RECTANGULAR; Surface Mount: YES;
FSA5157L6X by Onsemi is a SPDT switch with 1.65V min and 4.3V max supply voltage, 0.8 ohm max on-state resistance, and 75dB off-state isolation. It operates in industrial temperature range (-40 to 85 °C) and has fast switching times (65ns on, 40ns off). Ideal for applications requiring high-speed signal routing in compact designs.
FSA551UCX
SPST; Temperature Grade: INDUSTRIAL; No. of Terminals: 9; Package Code: VFBGA; Package Shape: RECTANGULAR; Surface Mount: YES;
FSA551UCX by Onsemi is a SPST switch with 2 channels, 0.6 ohm max on-state resistance, and 75 dB nominal off-state isolation. It operates in industrial temperature range (-40 to 85 °C) and has a very thin profile (0.619 mm). Ideal for applications requiring separate outputs and low power consumption (<0.12 mA).
FSA515UCX
SPST; Temperature Grade: INDUSTRIAL; No. of Terminals: 4; Package Code: VFBGA; Package Shape: RECTANGULAR; Surface Mount: YES;
FSA550BUCX
FSA550BUCX by Onsemi is a 4-channel multiplexer with a max on-state resistance of 0.8 ohm and a normal position voltage of NC. It operates in industrial temperature grade range from -40 to 85 °C, making it suitable for various switching applications requiring high isolation levels up to 90 dB. The package style is grid array with very thin profile and fine pitch, ideal for compact designs where space is limited.
FSA550UCX
4PST; Temperature Grade: INDUSTRIAL; No. of Terminals: 12; Package Code: VFBGA; Package Shape: RECTANGULAR; Surface Mount: YES;
FSA553UCX
FSA5157P6X_NL
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved