Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NLAST4051DTR2G by Onsemi is an 8-channel multiplexer with a supply voltage range of 2.5V to 6.6V, suitable for military-grade applications. It features a max on-state resistance of 26 ohm, fast switch-on/off times of 50 ns, and high off-state isolation of 93 dB. This CMOS technology-based device comes in a small outline package with gull wing terminals for surface mounting.
Median Price
$0.535
Lifecycle Status
Suppliers In-Stock
11
In-Stock Inventory
1k+
Rochester
1+ parts
$0.409
100+ parts
$0.384
1k+ parts
$0.348
10k+ parts
-
Chip1Stop
$0.887
$0.534
$0.467
Arrow
Verical
$0.376
Flip Electronics
$0.240
Digiode
$0.389
Nova Conductors
$0.473
TME
$0.633
$0.436
$0.355
Chip Stock
Vyrian
Cyclops Electronics Ltd
Ampacity Inc.
Semicontronic
$0.339
$0.338
Corphita
$0.368
Corohmni
Argo Parts USA
$0.459
Netroflash
Continental Prestige Electronics
$0.700
$0.301
Vigor
$0.920
Component Stockers USA
$1.110
$0.580
$0.500
Microchip USA
$2.508
Aztec Data Supply Inc.
$7.413
AZTECH Wire
$13.240
Advanced Electronics
$21.795
$19.833
$17.872
S.R.D Solutions
Perfect Parts
Lixinc
RC Electronics
$4.630
$4.370
$4.280
Kepictronics
SupplyDigital Components
Kulean Microsystems
iodParts Technologies Inc.
Authorized Procurement Solutions
Problanco Electronics
TANS Electronics
Assy Fe
UHIMA Technologies
Robosynatics
Lucentia Tech
Speed Components Ltd (Excess)
The plastic/epoxy material provides durability and ensures long-lasting performance of the product.
Allows for easy and convenient installation on circuit boards, saving time and effort during assembly.
Offers flexibility in multiplexing and switching operations, allowing multiple inputs to be efficiently managed.
Ideal voltage for powering the multiplexer and switches for efficient operation within specified limits.
Can withstand high operating temperatures, making it suitable for a wide range of applications.
CMOS technology ensures low power consumption and high noise immunity for reliable performance.
Multiplexers & Switches NLAST4051DTR2G attributes and parameters. Explore more Multiplexers & Switches devices from Onsemi
Additional Features:
Other IC type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
Maximum Negative Supply Voltage (Vsup):
Minimum Negative Supply Voltage (Vsup):
Nominal Negative Supply Voltage (Vsup):
No. of Channels:
No. of Functions:
No. of Terminals:
Nominal Off-state Isolation:
Nominal On-state Resistance Match:
Maximum On-state Resistance (Ron):
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Maximum Signal Current:
Sub-Category:
Maximum Supply Current (Isup):
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage (Vsup):
Surface Mount:
Maximum Switch-off Time:
Maximum Switch-on Time:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width (mm):
NLAST4051DTR2G Other Function Semiconductors trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Obsolescence/ EOL - OBS NOTICE 11/Sep/2023
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
M39029/58-360
Fct Electronic
CONNECTOR ACCESSORY; IEC Conformity: NO; Alternate Contact Sources: MILITARY; MIL Conformity: YES; Contact Gender: MALE; MIL-Connector Accessory Name: CONTACT;
CRGCQ0805F10R
TE Connectivity
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
1N4148
Terry Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V;
LL4148
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
MBR0530T1G
Onsemi
MBR0530T1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.375V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring high-speed switching in compact electronic devices like smartphones and tablets. The package style is small outline with gull wing terminals for surface mount assembly.
M24308/2-1F
Cinch Connectivity Solutions
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1750VAC; No. of Connectors: ONE; Body Depth: .375 inch;
BAV99
Nexperia
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Goodwork Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138K-13
Diodes Incorporated
BSS138K-13 by Diodes Inc. is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, operating in enhancement mode. With 3 terminals and 0.31A max drain current, it offers high performance in small outline package style.
2N2222A
Taitron Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
Itt Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 150 Cel;
LM317T
Analog Devices
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; No. of Functions: 1; Package Body Material: PLASTIC/EPOXY; Surface Mount: NO;
NE555/D
General Electric Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; Maximum Operating Temperature: 70 Cel; Technology: BIPOLAR; Package Equivalence Code: DIE OR CHIP; Qualification: Not Qualified;
LM78L05ACMX/NOPB
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; Maximum Reverse Recovery Time: .006 us;
SN65HVD230DR
Texas Instruments
SN65HVD230DR by Texas Instruments is a BICMOS technology interface circuit with 1Mbps data rate, suitable for industrial applications. It operates at 3.3V, has 8 terminals in a small outline package, and can withstand temperatures from -40 to 85°C.
Samsung
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel; Maximum Line Regulation (%/V): .07;
DS18B20Z/T&R
Maxim Integrated
DS18B20Z/T&R by Maxim Integrated is a 12-bit digital temperature sensor with a max supply voltage of 5.5V and an accuracy of 0.50°C. It features a 1-Wire interface, operates b/w -55°C to 125°C, and is ideal for applications requiring precise temperature monitoring in compact spaces.
Motorola
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; No. of Outputs: 1; Package Equivalence Code: SIP3,.1TB;
74LVC1G66GW
SPST; Temperature Grade: INDUSTRIAL; No. of Terminals: 5; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
FSA3157P6X
Fairchild Semiconductor
SPDT; Temperature Grade: INDUSTRIAL; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
MAX4544EUT-T
MAX4544EUT-T by Maxim Integrated is a SPDT switch with 60 ohm Ron, 100 ns switch-on time, and 75 ns switch-off time. It operates at -40 to 85 °C and has a supply voltage range of 2.7-12 V. Ideal for industrial applications requiring high-speed switching in compact designs.
CD74HC4051E
Rca Solid State
SINGLE-ENDED MULTIPLEXER; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
DG408DY-T1-E3
Vishay Intertechnology
Vishay Intertechnology's DG408DY-T1-E3 is a CMOS single-ended multiplexer with 8 channels. It operates at temperatures ranging from -40 to 85°C and has a max on-state resistance of 100 ohm. With a package size of 9.9mm x 3.9mm, it is ideal for industrial applications requiring precise signal switching within a compact design.
MC74HC4852ADTR2G
MC74HC4852ADTR2G by Onsemi is a CMOS differential multiplexer with 4 channels. It operates at -55 to 125 °C, with Vsup ranging from 2-6V. With a max on-state resistance of 1300 ohm and switching type as break-before-make, it's ideal for military-grade applications requiring precise signal routing.
74HC4051D-T
NXP Semiconductors
NXP Semiconductors' 74HC4051D-T is an 8-channel CMOS multiplexer with a max supply voltage of 10V. It features a nominal off-state isolation of 50dB and a max on-state resistance of 180 ohm. Ideal for automotive applications, this small outline package switch has a peak reflow temperature of 260°C and operates b/w -40 to 125°C.
DG419DY-T1
Temic Semiconductors
SPDT; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
TS3USB3031RMGR
TS3USB3031RMGR by Texas Instruments is a 2-channel differential multiplexer with 6 ohm max on-state resistance. Operating temperature range from -40 to 85 °C, suitable for industrial applications. Package style: chip carrier, very thin profile, ideal for space-constrained designs.
ADG1604BRUZ-REEL7
ADG1604BRUZ-REEL7 by Analog Devices is a 14-terminal CMOS multiplexer with 4 channels. It operates at a supply voltage range of 3.3V to 8V and offers a max on-state resistance of 1.2 ohm, making it ideal for automotive applications requiring precise signal switching in compact spaces.
DG212CJ+
SPST; Temperature Grade: COMMERCIAL; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
7705201EA
SINGLE-ENDED MULTIPLEXER; Temperature Grade: MILITARY; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
MAX399EEE+
MAX399EEE+ by Analog Devices is a CMOS differential multiplexer with 4 channels. It operates at industrial temperature grade, with a max supply voltage of 8V and on-state resistance of 100 ohm. Ideal for applications requiring precise signal switching in harsh environments.
MAX4564EKA+T
MAX4564EKA+T by Analog Devices is a SPDT multiplexer with 8 terminals, operating at -40 to 85°C. It has a low on-state resistance of 60 ohm and fast switching times of 60 ns turn-on and 40 ns turn-off. Ideal for industrial applications requiring high isolation (77 dB) and precise signal routing in compact designs.
74HC4066PW,118
SPST; Temperature Grade: AUTOMOTIVE; No. of Terminals: 14; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
ADG5419BRMZ
ADG5419BRMZ by Analog Devices is an 8-terminal SPDT switch with a max on-state resistance of 15 ohm. Operating at temperatures from -40 to 125 °C, it has a switching voltage range of +-9/+-22/9/40 V. Ideal for automotive applications due to its CMOS technology and compact design.
ADG451BRZ
ADG451BRZ by Analog Devices is a 4-channel CMOS multiplexer with a small outline package. It operates at a nominal voltage of 5V and has a max on-state resistance of 12 ohm. This industrial-grade switch is commonly used in applications requiring signal routing and switching.
77052012A
Harris Semiconductor
SINGLE-ENDED MULTIPLEXER; Temperature Grade: MILITARY; No. of Terminals: 20; Package Shape: SQUARE; Surface Mount: YES; Minimum Operating Temperature: -55 Cel;
CD4051BM96
CD4051BM96 by Texas Instruments is a CMOS single-ended multiplexer with 16 terminals. It operates at temperatures from -55 to 125 °C and has a max supply current of 3 mA. Ideal for applications requiring separate output, it offers a nominal bandwidth of 20 kHz and on-state resistance of 1050 ohm.
DG403DY-T1-E3
Vishay Intertechnology's DG403DY-T1-E3 is a CMOS SPDT switch with 2 functions, 16 terminals, and max on-state resistance of 45 ohm. With a supply voltage range of ±15V and industrial temperature grade, it suits applications requiring fast switching times like signal routing in industrial electronics.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NLASB3157DFT2G
NLASB3157DFT2G by Onsemi is a SPDT switch with 6 terminals, operating b/w -55 to 125 °C. It has a max on-state resistance of 15 ohm and offers 57 dB off-state isolation. Ideal for military-grade applications requiring fast switching times and low power consumption.
NLAS4157DFT2G
NLAS4157DFT2G by Onsemi is a SPDT switch with 6 terminals, operating from -40 to 85°C. It has a low on-state resistance of 4 ohm and provides 52 dB isolation. Ideal for industrial applications requiring fast switching times and high reliability in a compact package.
NLASB3157DFT2GH
SPDT; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Peak Reflow Temperature (C): NOT SPECIFIED;
NLAS4684MR2G
SPDT; Temperature Grade: MILITARY; No. of Terminals: 10; Package Code: TSSOP; Package Shape: SQUARE; Surface Mount: YES;
NLAST4599DTT1G
SPDT; Temperature Grade: MILITARY; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
NLAS4599DTT1G
NLAS4684FCT1G
NLAS4684FCT1G by Onsemi is a SPDT switch with 2 functions, operating at -55 to 125 °C. It has a low on-state resistance of 1 ohm and provides 65 dB isolation. Ideal for military-grade applications requiring fast switching times and precise control in compact spaces.
NLAS4684MNR2G
SPDT; Temperature Grade: MILITARY; No. of Terminals: 10; Package Code: HVSON; Package Shape: SQUARE; Surface Mount: YES;
NLAS5223BMNR2G
SPDT; Temperature Grade: INDUSTRIAL; No. of Terminals: 10; Package Code: VQCCN; Package Shape: RECTANGULAR; Surface Mount: YES;
NLAS4599DFT2G
NLAS5123MNR2G
SPDT; Temperature Grade: INDUSTRIAL; No. of Terminals: 6; Package Code: VSON; Package Shape: RECTANGULAR; Surface Mount: YES;
NLAST4599DFT2G
NLAST4599DFT2G by Onsemi is a SPDT multiplexer with 6 terminals, operating at -55 to 125°C. It has a supply voltage range of 2-5.5V and offers fast switching times of 25ns on and 15ns off. Ideal for military-grade applications requiring high isolation (93dB) in a compact SOT package.
NLAS4053DR2G
NLAS4053DR2G by Onsemi is a CMOS multiplexer with 3 functions. It has a small outline package style and operates at temperatures ranging from -55 to 125 °C. This device is commonly used in military applications due to its temperature grade and compact size.
NLAS5223BLMNR2G
NLAS3899BMNTBG
DPDT; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: VQCCN; Package Shape: RECTANGULAR; Surface Mount: YES;
NLAS4783BMN1R2G
SPDT; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES;
NLAS1053USG
NLAS1053USG by Onsemi is a CMOS single-ended multiplexer with 2 channels. It operates at temperatures from -55 to 125 °C and has a max supply voltage of 5.5 V. With a nominal off-state isolation of 93 dB, it is ideal for military-grade applications requiring precise signal switching in compact spaces.
NLAS323USG
SPST; Temperature Grade: MILITARY; No. of Terminals: 8; Package Code: VSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
NLAS2066USG
NLAS2066USG by Onsemi is a CMOS SPST switch with 2 functions, operating at -55 to 125 °C. It has a max on-state resistance of 50 ohm and nominal off-state isolation of 73 dB. Ideal for military-grade applications requiring fast switching times and low power consumption.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved