Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NLAS5123MNR2G by Onsemi is a SPDT switch with 6 terminals, operating at -40 to 85 °C. It has a low on-state resistance of 1.7 ohm and fast switching times of 35 ns on and 25 ns off. Ideal for industrial applications requiring high isolation (62 dB) and a supply voltage range of 1.65V to 5.5V.
Median Price
$0.622
Lifecycle Status
Suppliers In-Stock
12
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
$0.611
1k+ parts
$0.507
10k+ parts
$0.452
Verical
$0.634
$0.565
DigiKey
$0.760
Mouser Electronics
$0.518
Digiode
$0.499
Nova Conductors
$0.559
Bristol Electronics
$1.811
$0.670
$0.471
Vyrian
DigiKey Marketplace
$0.550
Chip Stock
Speed Components Ltd
Dan-Mar Components
Ampacity Inc.
$0.440
Semicontronic
$0.429
$0.427
Corphita
$0.472
Corohmni
Continental Prestige Electronics
$0.547
Argo Parts USA
$0.542
Netroflash
$0.531
$0.520
Advanced Electronics
$14.337
$13.047
$11.756
Aztec Data Supply Inc.
$21.490
Lixinc
Problanco Electronics
SupplyDigital Components
Benley Electronics
Assy Fe
TANS Electronics
Futuretech Components
Kulean Microsystems
Microchip USA
Perfect Parts
Kepictronics
UHIMA Technologies
Plastic/Epoxy material provides durability and protection for the internals of the product, making it reliable for long-term use.
Surface mount capability allows for easy and convenient installation on circuit boards, saving space and simplifying the manufacturing process.
Operates efficiently at a nominal supply voltage of 2.7V, making it suitable for a variety of applications.
Capable of operating at extremely low temperatures, ensuring reliable performance in harsh environmental conditions.
High-quality terminal finish with Nickel/Palladium/Gold ensures good conductivity and resistance to corrosion, enhancing the product's overall lifespan.
Low on-state resistance minimizes power loss and allows for efficient signal transmission.
Fast switch-off time of 25ns ensures quick response and reduces signal latency, making it ideal for high-speed applications.
High off-state isolation of 62 dB ensures minimal interference between channels, maintaining signal integrity in multiplexing and switching operations.
Multiplexers & Switches NLAS5123MNR2G attributes and parameters. Explore more Multiplexers & Switches devices from Onsemi
Other IC type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Channels:
No. of Functions:
No. of Terminals:
Nominal Off-state Isolation:
Nominal On-state Resistance Match:
Maximum On-state Resistance (Ron):
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage (Vsup):
Surface Mount:
Maximum Switch-off Time:
Maximum Switch-on Time:
Switching (V):
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width (mm):
NLAS5123MNR2G Other Function Semiconductors trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Obsolescence/ EOL - Mult Dev EOL 09/Oct/2020
PCN Assembly/Origin - Assembly Change 20/Sep/2019
PCN Packaging - Covering Tape/Material Chg 20/May/2016
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
ESD5Z5.0T1G
Onsemi
ESD5Z5.0T1G by Onsemi is a unidirectional Trans Voltage Suppressor Diode with 5V reverse test voltage and 174W peak power dissipation. It is used for transient suppression in electronic circuits, meeting IEC-61000-4-2, 4-4 standards and UL recognized for reliability.
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
ULN2803A
Motorola
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Terminal Position: DUAL; JESD-30 Code: R-PDIP-T18;
SMBJ18CA
Protek Devices
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CR0805-FX-10R0ELF
Bourns
Bourns CR0805-FX-10R0ELF is a SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for applications requiring a temperature range of -55 to 155 °C, such as automotive electronics and industrial control systems.
M39029/58-360
Amphenol
CONNECTOR ACCESSORY; MIL Conformity: YES; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: MALE; Terminal Type: CRIMP; IEC Conformity: NO;
Telefunken Microelectronics
2N7002
Transys Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 60 V; Maximum Operating Temperature: 150 Cel;
Sensitron Semiconductor
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; JESD-609 Code: e3; Minimum DS Breakdown Voltage: 60 V;
LM358N
Kec
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
CRG0805F10R
TE Connectivity
TE Connectivity's CRG0805F10R is a 10 ohm fixed resistor with 1% tolerance and 0.125 W power dissipation. It features thick film technology, SMT package style, and matte tin over nickel terminal finish. Ideal for surface mount applications in electronics, offering a temperature coefficient of 200 ppm/°C and operating voltage of 150 V.
MBR130T1G
MBR130T1G by Onsemi is a Schottky rectifier diode with max output current of 1A and max repetitive peak reverse voltage of 30V. It operates b/w -65 to 125°C, suitable for surface mount applications in electronics requiring low forward voltage drop.
1N4148
Continental Device India
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BAV99
Vishay Intertechnology
Vishay Intertechnology's BAV99 diode features a max forward voltage of 1.3V and a max output current of 0.15A, making it ideal for rectification applications. With a small outline package style and dual terminal position, this series-connected diode is designed for surface mount usage in various electronic circuits with an operating temperature range from -55°C to 150°C.
DS18B20U+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: SQUARE; Housing: PLASTIC; Minimum Supply Voltage: 3 V;
2N2222A
ROHM
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
LL4148
Silicon Standard
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Infineon Technologies
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
MAX4564EKA+T
SPDT; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: LSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
CD74HC4051M96G4
Texas Instruments
CD74HC4051M96G4 by Texas Instruments is a CMOS single-ended multiplexer with 16 terminals, operating at -55 to 125 °C. It has a max on-state resistance of 270 ohm and can handle a signal current of 0.025 A. Ideal for military-grade applications requiring high bandwidth and low isolation.
CD74HC4067M
Intersil
SINGLE-ENDED MULTIPLEXER; Temperature Grade: MILITARY; No. of Terminals: 24; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
ADG1604BRUZ
Analog Devices
ADG1604BRUZ by Analog Devices is a 14-terminal CMOS multiplexer with 4 channels. It operates at -40 to 125 °C and supports Vsup from -8V to +8V. With a max on-state resistance of 1.2 ohm, it's ideal for automotive applications requiring high-speed switching capabilities.
ADG452BRUZ-REEL
ADG452BRUZ-REEL by Analog Devices is a 4-function multiplexer with 16 terminals, operating at -40 to 85°C. It features a max on-state resistance of 12 ohm, switching voltage of 5V, and industrial temperature grade. Ideal for applications requiring precise signal routing in compact spaces.
SN74LVC1G66DBVT
SN74LVC1G66DBVT by Texas Instruments is a SPST switch with 5 terminals, operating at a voltage range of 1.65V to 5.5V. It offers low on-state resistance of 20 ohm and fast switching times of 6.5ns on and 6.9ns off, suitable for industrial applications requiring high-speed signal routing in compact spaces.
MAX4999ETJ+T
MAX4999ETJ+T by Analog Devices is an 8-channel differential multiplexer with a max on-state resistance of 12 ohm. Operating at a temperature range of -40 to 85 °C, it has a nominal voltage of 3.3 V and offers a nominal off-state isolation of 27 dB. Ideal for industrial applications requiring precise signal switching in compact spaces.
77052012A
Vishay Siliconix
SINGLE-ENDED MULTIPLEXER; Temperature Grade: MILITARY; No. of Terminals: 20; Package Shape: SQUARE; Surface Mount: YES; Nominal Negative Supply Voltage (Vsup): -15 V;
ADG5412BRUZ-REEL7
ADG5412BRUZ-REEL7 by Analog Devices is a CMOS SPST switch with 4 functions, 16 terminals, and on-state resistance of 11 ohm. It operates in automotive grade at -40 to 125 °C and has a supply voltage range of +-9/+-22/9/40 V. Ideal for applications requiring fast switching with separate outputs in compact designs.
DG409DY
Siliconix
DIFFERENTIAL MULTIPLEXER; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
SN74LVC1G3157DCKR
SN74LVC1G3157DCKR by Texas Instruments is a SPDT switch with 6 terminals, operating at a voltage range of 1.65V to 5.5V. It offers a max on-state resistance of 30 ohm and a bandwidth of 340 kHz, suitable for industrial applications requiring fast switching times and high isolation levels. The package style is small outline with thin profile, making it ideal for space-constrained designs.
DG407DYZ-T
DIFFERENTIAL MULTIPLEXER; Moisture Sensitivity Level (MSL): 3; Peak Reflow Temperature (C): 260; JESD-609 Code: e3; Terminal Finish: Matte Tin (Sn) - annealed; Maximum Time At Peak Reflow Temperature (s): 30;
ADG811YRUZ
ADG811YRUZ by Analog Devices is a CMOS SPST switch with 4 functions, 0.72 ohm Ron, and 30 ns switch-on time. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and 67 dB isolation level. Package style: small outline, thin profile, shrink pitch.
ADG884BRMZ-REEL7
ADG884BRMZ-REEL7 by Analog Devices is a CMOS audio/video switch with 2 functions, 0.5 ohm max on-state resistance, and 60 dB nominal off-state isolation. It operates b/w -40 to 85 °C and has a supply voltage range of 1.8V to 5.5V. Ideal for industrial applications requiring fast switching times and high isolation levels.
74HC4051PW-Q100,11
Nexperia
DIFFERENTIAL MULTIPLEXER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
DG508ACJ
SINGLE-ENDED MULTIPLEXER; Temperature Grade: COMMERCIAL; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
74LVC1G3157GW-Q10H
SINGLE-ENDED MULTIPLEXER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
DG409DY+
Analog Devices' DG409DY+ is a CMOS differential multiplexer with 4 channels, 2 functions, and 16 terminals. It operates at industrial temperature grade (-40 to 85 °C) with a max supply voltage of +/-20V. Ideal for applications requiring fast switching (150 ns) and high off-state isolation (75 dB).
CD4066BM96
CD4066BM96 by Texas Instruments is a CMOS SPST switch with 4 channels, operating at -55 to 125 °C. It has a max on-state resistance of 1300 ohm and nominal bandwidth of 40 kHz. Ideal for military-grade applications requiring low power consumption and fast switching capabilities.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ADG752BRMZ
ADG752BRMZ by Analog Devices is an 8-terminal SPDT switch with a max on-state resistance of 50 ohm and off-state isolation of 80 dB. It operates b/w -40 to 85°C, suitable for industrial applications requiring fast switching times (18 ns on, 8 ns off) in compact designs due to its small outline package.
NLASB3157DFT2G
NLASB3157DFT2G by Onsemi is a SPDT switch with 6 terminals, operating b/w -55 to 125 °C. It has a max on-state resistance of 15 ohm and offers 57 dB off-state isolation. Ideal for military-grade applications requiring fast switching times and low power consumption.
NLAS4157DFT2G
NLAS4157DFT2G by Onsemi is a SPDT switch with 6 terminals, operating from -40 to 85°C. It has a low on-state resistance of 4 ohm and provides 52 dB isolation. Ideal for industrial applications requiring fast switching times and high reliability in a compact package.
NLASB3157DFT2GH
SPDT; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Peak Reflow Temperature (C): NOT SPECIFIED;
NLAS4684MR2G
SPDT; Temperature Grade: MILITARY; No. of Terminals: 10; Package Code: TSSOP; Package Shape: SQUARE; Surface Mount: YES;
NLAST4599DTT1G
SPDT; Temperature Grade: MILITARY; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
NLAS4599DTT1G
NLAS4684FCT1G
NLAS4684FCT1G by Onsemi is a SPDT switch with 2 functions, operating at -55 to 125 °C. It has a low on-state resistance of 1 ohm and provides 65 dB isolation. Ideal for military-grade applications requiring fast switching times and precise control in compact spaces.
NLAS4684MNR2G
SPDT; Temperature Grade: MILITARY; No. of Terminals: 10; Package Code: HVSON; Package Shape: SQUARE; Surface Mount: YES;
NLAS5223BMNR2G
SPDT; Temperature Grade: INDUSTRIAL; No. of Terminals: 10; Package Code: VQCCN; Package Shape: RECTANGULAR; Surface Mount: YES;
NLAS4599DFT2G
NLAST4051DTR2G
SINGLE-ENDED MULTIPLEXER; Temperature Grade: MILITARY; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
NLAST4599DFT2G
NLAST4599DFT2G by Onsemi is a SPDT multiplexer with 6 terminals, operating at -55 to 125°C. It has a supply voltage range of 2-5.5V and offers fast switching times of 25ns on and 15ns off. Ideal for military-grade applications requiring high isolation (93dB) in a compact SOT package.
NLAS4053DR2G
NLAS4053DR2G by Onsemi is a CMOS multiplexer with 3 functions. It has a small outline package style and operates at temperatures ranging from -55 to 125 °C. This device is commonly used in military applications due to its temperature grade and compact size.
NLAS5223BLMNR2G
NLAS3899BMNTBG
DPDT; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: VQCCN; Package Shape: RECTANGULAR; Surface Mount: YES;
NLAS4783BMN1R2G
SPDT; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES;
NLAS1053USG
NLAS1053USG by Onsemi is a CMOS single-ended multiplexer with 2 channels. It operates at temperatures from -55 to 125 °C and has a max supply voltage of 5.5 V. With a nominal off-state isolation of 93 dB, it is ideal for military-grade applications requiring precise signal switching in compact spaces.
NLAS323USG
SPST; Temperature Grade: MILITARY; No. of Terminals: 8; Package Code: VSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
NLAS2066USG
NLAS2066USG by Onsemi is a CMOS SPST switch with 2 functions, operating at -55 to 125 °C. It has a max on-state resistance of 50 ohm and nominal off-state isolation of 73 dB. Ideal for military-grade applications requiring fast switching times and low power consumption.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved