Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NCP5339MNTXG by Onsemi is a MOSFET Gate Driver with 43 terminals, operating at -40 to 125 °C. It has a supply voltage range of 4.5-20 V and is ideal for automotive applications due to its Half Bridge based interface IC type.
Median Price
$1.320
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
1k+ parts
$1.180
10k+ parts
$1.110
Digiode
$1.387
Component Sense
Flip Electronics
K-1 Technologies
Chip Stock
Vyrian
Classic Components Corporation
Corphita
$1.314
Corohmni
$1.460
AZTECH Wire
$8.800
Component Stockers USA
$99.990
RC Electronics
Authorized Procurement Solutions
QUARKTWIN TECHNOLOGY LTD
Perfect Parts
A-Z Elektronik GmbH
SupplyDigital Components
TANS Electronics
Microchip USA
Kulean Microsystems
Kepictronics
Speed Components Ltd (Excess)
Problanco Electronics
iodParts Technologies Inc.
UHIMA Technologies
Surface mount design allows for easy installation and saves valuable PCB space.
Suitable for applications where a maximum supply voltage of 5.5V is required.
Square package shape provides stability and easy mounting on the PCB.
With 43 terminals, this MOSFET gate driver offers multiple connection options for flexibility in circuit design.
Matte tin finish ensures good solderability for reliable connections.
High maximum operating temperature of 125 °C allows for use in a wide range of environments.
Low minimum operating temperature of -40 °C ensures reliable performance even in cold conditions.
Automotive temperature grade ensures durability and reliability in automotive applications.
MOSFET Gate Drivers NCP5339MNTXG attributes and parameters. Explore more MOSFET Gate Drivers devices from Onsemi
High Side Driver:
Interface IC Type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Maximum Seated Height:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Maximum Supply Voltage-1:
Minimum Supply Voltage-1:
Nominal Supply Voltage-1:
Surface Mount:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
NCP5339MNTXG Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Obsolescence/ EOL - Mult Dev EOL 7/Apr/2021
PCN Assembly/Origin - NCPyyyy Assembly Site Add 13/Mar/2018
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
2N2222A
Allegro MicroSystems
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
General Transistor
2N7002DWH6327XTSA1
Infineon Technologies
2N7002DWH6327XTSA1 by Infineon: N-CHANNEL FET with 60V DS Breakdown Voltage, 0.3A ID, and 3ohm RDS. Ideal for SWITCHING applications in small outline packages with GULL WING terminals.
1554216002
Molex
WIRE AND CABLE;
ULN2803A
Motorola
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Terminal Position: DUAL; JESD-30 Code: R-PDIP-T18;
BSS123-7-F
Diodes Incorporated
BSS123-7-F by Diodes Inc. is a N-channel FET with 100V DS breakdown voltage and 0.17A drain current. Ideal for switching applications, it features a single configuration with built-in diode, operates in enhancement mode, and has a max power dissipation of 0.3W.
1N4148
Baneasa S A
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Taiwan Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Peak Reflow Temperature (C): 260; Maximum Operating Temperature: 175 Cel; JESD-609 Code: e3; No. of Elements: 1;
Philips Semiconductors
SMBJ18CA
Secos
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS123,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Moisture Sensitivity Level (MSL): 1; No. of Terminals: 3; Maximum Time At Peak Reflow Temperature (s): 30;
43025-0400
The Molex 43025-0400 is a board connector with 4 contacts, 2 rows, and a mating contact pitch of 0.118". It has a body length of 0.27", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for commercial applications requiring a female connector with crimp termination and UL94V-0 flammability rating.
ERJ6ENF10R0V
Panasonic
Panasonic ERJ6ENF10R0V is a 10 ohm fixed resistor with 1% tolerance, suitable for surface mount applications. With a rated power dissipation of 0.125W and operating voltage of 150V, it operates b/w -55°C to 155°C. Its metal glaze/thick film technology ensures stable performance in various electronic circuits.
Meritek Electronics
Multicomp Pro
1N4148WT
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Yangzhou Yangjie Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Maximum Drain Current (ID): .34 A;
LM358N
Silicon Group
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LM107H/883C
National Semiconductor
LM107H/883C by National Semiconductor is a MILITARY-grade Operational Amplifier with +-5/+-15V supplies. Featuring 2000uV max input offset voltage, it operates from -55 to 125 °C. Ideal for applications requiring VOLTAGE-FEEDBACK architecture and frequency compensation.
ICL7667MJA/883B
General Electric Solid State
MOSFET Drivers; Temperature Grade: MILITARY; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
FAN7380M
FAN7380M by Fairchild Semiconductor is a MOSFET gate driver with 20V max supply voltage, 15V power supplies, and built-in protections. It is used in automotive applications due to its small outline package style and half bridge based peripheral driver interface IC type. With fast turn-on/off times of 0.2/0.19 us, it ensures efficient source/sink output current flow direction.
MIC4426YM-TR
Micrel
BUFFER OR INVERTER BASED MOSFET DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
LT1158CSW#PBF
Analog Devices
LT1158CSW#PBF by Analog Devices is a MOSFET Gate Driver with 16 terminals, operating voltage range of 5-30V, and turn-off time of 0.55us. Ideal for half bridge based applications, it features high side driver capability and operates in commercial temperature grade up to 70°C.
UCC23513BQDWYQ1
Texas Instruments
UCC23513BQDWYQ1 by Texas Instruments is a MOSFET gate driver with 6 terminals, operating temperature range of -40 to 125 °C. It has a max supply voltage of 33 V and output current of 4.5 A, suitable for automotive applications due to AEC-Q100 screening level. The driver features push-pull output characteristics and gull wing terminal form, making it ideal for high side driving in compact designs.
PDRV8706SRHBQ1
PDRV8706SRHBQ1 by Texas Instruments is a MOSFET gate driver with a max supply voltage of 37V and operating temperature range of -40 to 125°C. It features push-pull output characteristics, complementary polarity, and a turn-on time of 0.85µs. Ideal for automotive applications requiring high side drivers in a compact chip carrier package style.
UCC21750DW
UCC21750DW by Texas Instruments is a MOSFET gate driver with 10A output current, suitable for automotive applications. It operates b/w -40 to 125°C, has 16 terminals in a small outline package, and features a buffer or inverter-based interface IC type.
CPC1560GSTR
Littelfuse
BUFFER OR INVERTER BASED MOSFET DRIVER; Maximum Time At Peak Reflow Temperature (s): 30; JESD-609 Code: e3; Peak Reflow Temperature (C): 250; Moisture Sensitivity Level (MSL): 1; Terminal Finish: TIN;
UCC27324DR
UCC27324DR by Texas Instruments is a MOSFET gate driver with 2 functions, operating at supply voltages of 4.5-15V. With a small outline package style and dual terminal position, it is suitable for automotive applications requiring true output polarity and peak current limit of 4A. The driver offers fast turn-on/off times of 0.04/0.05 us, making it ideal for high-speed switching in automotive systems.
UCC27211ADRMR
UCC27211ADRMR by Texas Instruments is a MOSFET gate driver with 2 channels, 12V nominal voltage, and 4A max output current. It operates in automotive-grade temperatures (-40 to 140°C) and has a turn-on/off time of 42µs. Ideal for driving high-side MOSFETs in automotive applications.
TC4428COA
Telcom Semiconductor
BUFFER OR INVERTER BASED MOSFET DRIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
UCC5390ECD
UCC5390ECD by Texas Instruments is a MOSFET gate driver with a max supply voltage of 33V and built-in transient and under voltage protections. It operates in automotive-grade temperatures, has a peak output current of 17A, and features a turn-on/off time of 0.1us, making it ideal for high-performance applications requiring fast switching speeds.
IR21844SPBF
IR21844SPBF by Infineon is a MOSFET gate driver with a max supply voltage of 20V and high side driver feature. It operates in automotive-grade temperatures (-40 to 125°C) and has a turn-on time of 0.9us, making it suitable for half-bridge based MOSFET driver applications. The package style is small outline (8.65mm x 3.9mm) with dual terminals and matte tin finish, ideal for surface mount designs requiring compact dimensions.
EL7457CLZ-T13
Renesas Electronics
EL7457CLZ-T13 by Renesas Electronics is a MOSFET Gate Driver with 4 functions, operating temperature range of -40 to 85°C. It features CMOS technology, quad terminal position, and is suitable for industrial applications requiring high side drivers.
UCC27323DGN
UCC27323DGN by Texas Instruments is a MOSFET gate driver with 2 functions, operating at supply voltages of 4.5-15V. It features a small outline package style and is suitable for automotive applications due to its wide temperature range (-40 to 125°C) and inverted output polarity. With a max output current of 4A, it offers fast turn-on/off times (0.04/0.05 us) making it ideal for high-performance systems.
EL7457CLZ
EL7457CLZ by Renesas Electronics is a MOSFET Gate Driver with 4 functions, CMOS technology, and operates at -40 to 85°C. It is a surface-mount chip carrier suitable for industrial applications requiring high-side drivers. With a compact size of 4x4mm and quad terminals, it offers efficient performance in various electronic systems.
CPC1560GS
BUFFER OR INVERTER BASED MOSFET DRIVER; Terminal Finish: TIN; Peak Reflow Temperature (C): 250; JESD-609 Code: e3; Maximum Time At Peak Reflow Temperature (s): 30; Moisture Sensitivity Level (MSL): 1;
UCC27524D
UCC27524D by Texas Instruments is a MOSFET gate driver with 2 functions, operating at supply voltages b/w 4.5V to 18V. It has a small outline package style and is suitable for automotive applications due to its wide temperature range of -40°C to 140°C. With a peak output current of 5A and turn-on/off time of 0.023us, it offers efficient buffering/inverting for MOSFETs in various electronic systems.
HIP4080AIBZT
FULL BRIDGE BASED MOSFET DRIVER; Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): 30; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 2; Terminal Finish: MATTE TIN;
IXDN609SIATR
Ixys Integrated Circuits Division
BUFFER OR INVERTER BASED MOSFET DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NCP51705MNTXG
Onsemi
BUFFER OR INVERTER BASED MOSFET DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
NCP51820AMNTWG
HALF BRIDGE BASED MOSFET DRIVER; Terminal Finish: NICKEL PALLADIUM GOLD; JESD-609 Code: e4; Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): 30; Moisture Sensitivity Level (MSL): 1;
NCP51561BADWR2G
HALF BRIDGE BASED MOSFET DRIVER; Terminal Finish: NICKEL GOLD PALLADIUM; Maximum Time At Peak Reflow Temperature (s): 30; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 1;
NCP51530ADR2G
HALF BRIDGE BASED MOSFET DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
NCP51530BDR2G
NCP51530BDR2G by Onsemi is a MOSFET gate driver with 17V max supply voltage, 10V min supply voltage, and 3.5A nominal output peak current limit. Ideal for automotive applications due to its high side driver feature and -40°C to 125°C operating temperature range. Compact in size with small outline package style for surface mount assembly.
NCP5369MNR2G
AND GATE BASED MOSFET DRIVER; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 40; Package Code: HVQCCN; Package Shape: SQUARE;
NCP51530BMNTWG
NCP51530BMNTWG by Onsemi is a MOSFET gate driver with a supply voltage range of 10-17V, suitable for automotive applications. It features a high side driver, turn-on/off time of 40us, and output peak current limit of 3.5A. The package style is small outline with very thin profile, making it ideal for space-constrained designs.
NCP5183DR2G
NCP5901MNTBG
BUFFER OR INVERTER BASED MOSFET DRIVER; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 8; Package Code: HVSON; Package Shape: SQUARE;
NCP5351DG
BUFFER OR INVERTER BASED MOSFET DRIVER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; No. of Functions: 1;
NCP5359DR2G
NCP5359DR2G by Onsemi is a MOSFET gate driver with 8 terminals, operating voltage range of 10-13.2V, and peak reflow temperature of 260°C. It is a half bridge based driver suitable for high side applications in compact designs due to its small outline package style.
NCP5901BDR2G
BUFFER OR INVERTER BASED MOSFET DRIVER; Temperature Grade: OTHER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
NCP5901BMNTBG
NCP5901BMNTBG by Onsemi is a MOSFET Gate Driver with 8 terminals, operating voltage range of 4.5-13.2 V, and high side driver capability. It has a small outline package style, matte tin terminal finish, and can withstand temperatures from -10 to 125 °C. Ideal for applications requiring precise control of power supplies in compact spaces.
NCP5901DR2G
NCP51561CADWR2G
HALF BRIDGE BASED MOSFET DRIVER;
NCP51560ABDWR2G
NCP51561CBDWR2G
NCP51561DADWR2G
NCP51560BBDWR2G
NCP51561DBDWR2G
HALF BRIDGE BASED MOSFET DRIVER; Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): 30; Moisture Sensitivity Level (MSL): 1; Terminal Finish: NICKEL GOLD PALLADIUM;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved