Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MMSF5N03HDR2 by Onsemi is a N-CHANNEL Power FET with 30V DS Breakdown Voltage, 33A IDM, and 0.04 ohm RDS(on). Ideal for SWITCHING applications, it features a SINGLE configuration with BUILT-IN DIODE in a PLASTIC/EPOXY package. Operating in ENHANCEMENT MODE, it has an EAS of 450mJ and can handle up to 6.5A ID.
Median Price
$2.000
Lifecycle Status
Suppliers In-Stock
12
In-Stock Inventory
1k+
Ace Electronics
1+ parts
100+ parts
-
1k+ parts
10k+ parts
R&J Components
Specialty Parts & Electronic Components, Inc. (S.P.E.C.)
ComSIT Distribution GmbH
Bristol Electronics
Cyclops Electronics Ltd
Digiode
Prism Electronics
Mentor Electronics Marketing, LLC
Vyrian
Microfarads
Inland Empire Components Inc.
Corohmni
Kepictronics
Authorized Procurement Solutions
Kulean Microsystems
SupplyDigital Components
TANS Electronics
Perfect Parts
Assy Fe
Corphita
Problanco Electronics
Futuretech Components
UHIMA Technologies
The plastic/epoxy body material provides durability and protection for the internal components of the FET, ensuring long-lasting performance.
N-channel FETs are commonly used for higher frequency applications and have lower ON resistance, making them efficient for switching applications.
The built-in diode allows for efficient current flow in the reverse direction, providing additional protection and versatility in circuit designs.
Designed specifically for switching applications, this FET is optimized for fast switching speeds and efficient power management.
Being surface mountable, this FET is easy to integrate into PCB designs, saving space and simplifying the manufacturing process.
Enhancement mode FETs offer better control over the flow of current, making them ideal for precise switching applications.
With a high maximum pulsed drain current, this FET can handle surges in current without being damaged, ensuring reliability in high-demand applications.
The high avalanche energy rating indicates the FET's ability to withstand high-energy spikes, making it suitable for rugged environments.
The high maximum drain current allows this FET to handle moderate power loads efficiently, making it versatile for various applications.
With a high power dissipation rating, this FET can handle heat dissipation effectively, ensuring stable operation under heavy loads.
The high maximum operating temperature allows this FET to be used in a wide range of environmental conditions without overheating.
The low drain-source on resistance minimizes power losses and improves efficiency in switching applications, making this FET an energy-efficient choice.
Power Field Effect Transistors (FET) MMSF5N03HDR2 attributes and parameters. Explore more Power Field Effect Transistors (FET) devices from Onsemi
Additional Features:
Avalanche Energy Rating (EAS):
Configuration:
Minimum DS Breakdown Voltage:
Maximum Drain Current (Abs) (ID):
Maximum Drain Current (ID):
Maximum Drain-Source On Resistance:
Field Effect Transistor Technology:
JESD-30 Code:
JESD-609 Code:
No. of Elements:
No. of Terminals:
Operating Mode:
Maximum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Polarity or Channel Type:
Maximum Power Dissipation (Abs):
Maximum Pulsed Drain Current (IDM):
Qualification:
Sub-Category:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Transistor Application:
Transistor Element Material:
MMSF5N03HDR2 Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8541.29.00.95
SB
8541.29.00.80
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
STM32H743BIT6
STMicroelectronics
STM32H743BIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 208 terminals, and 1085440 bytes of RAM. It features 2 DAC channels, 32 ADC channels, and operates at a max clock frequency of 48 MHz. Ideal for industrial applications requiring high-speed processing and extensive peripheral connectivity.
2N2222A
Space Power Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LL4148
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
MBRA340T3G
Onsemi
MBRA340T3G by Onsemi is a Schottky rectifier diode with 40V reverse test voltage and 3A max output current. Ideal for power applications, it operates b/w -55 to 150°C, features matte tin terminal finish, and comes in a small outline package.
1N4148
Grande Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMBJ18CA
Pro-an Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Polarity: BIDIRECTIONAL; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
LM358N
Harris Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
1N4148WS
General Instrument
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
North American Philips Discrete Products Div
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V; Terminal Finish: Tin/Lead (Sn/Pb);
Jiangsu Changjiang Electronics Technology
Diodes Incorporated
Eic Semiconductor
Lite-on Semiconductor
Sangdest Microelectronics (Nanjing)
Hy Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMMBT2222ALT1G
SMMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, 0.6A IC, and 40V VCE. It has a hFE of 75, fT of 300MHz, and operates up to 150°C. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance.
FDV303N
FDV303N by Onsemi is a N-CHANNEL FET with 25V DS Breakdown Voltage, 0.68A Drain Current, and 0.45 ohm On Resistance. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE at temperatures ranging from -55 to 150°C. Package style is SMALL OUTLINE with GULL WING terminals for surface mount assembly.
Electronic Transistors
BSP135H6327XTSA1
Infineon Technologies
Infineon's BSP135H6327XTSA1 is a N-CHANNEL Power FET with 600V DS Breakdown Voltage. Ideal for DEPLETION MODE operation, it has 0.48A IDM and 0.12A ID. Widely used in automotive applications due to AEC-Q101 standard compliance and 150°C max operating temp.
FDPF10N60NZ
FDPF10N60NZ by Onsemi is a N-CHANNEL Power FET with 600V DS Breakdown Voltage. Ideal for SWITCHING applications, it features a max IDM of 40A and EAS of 550mJ. With a 0.75 ohm RDS(on), this transistor operates in ENHANCEMENT MODE up to 150°C, making it suitable for high-power switching circuits.
FDD4141-F085P
Power Field-Effect Transistors; JESD-609 Code: e3; Terminal Finish: MATTE TIN; Maximum Time At Peak Reflow Temperature (s): 30; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 260;
FDMS86252L
FDMS86252L by Onsemi is a N-CHANNEL Power FET with 150V DS Breakdown Voltage, 30A IDM, and 0.056 ohm RDS(on). Ideal for SWITCHING applications, it features a SINGLE configuration with BUILT-IN DIODE. Operating in ENHANCEMENT MODE, this transistor has a max power dissipation of 50W and can withstand temperatures up to 150°C.
2N7002BKMB,315
NXP Semiconductors
2N7002BKMB,315 by NXP Semiconductors is a single N-channel power FET with an operating mode of enhancement. It has a max drain current of 0.45A and a max power dissipation of 0.715W. This MOSFET is suitable for applications requiring high efficiency and temperature resistance up to 150°C.
IXTK3N250L
Littelfuse
IXTK3N250L by Littelfuse is a N-CHANNEL FET with 2500V DS Breakdown Voltage, ideal for AMPLIFIER applications. It features 8A IDM, 417W Abs Power Dissipation, and operates in ENHANCEMENT MODE. With a max operating temperature of 150°C and -55°C min, it offers reliable performance in various environments.
IRLML0100TRPBF-1
Infineon's IRLML0100TRPBF-1 is a N-channel Power FET with 100V DS breakdown voltage and 7A IDM. Ideal for enhancement mode operation, it features a built-in diode, 0.22 ohm RDS(on), and is suitable for surface mount applications in power electronics.
FQB12P20TM
FQB12P20TM by Onsemi is a P-CHANNEL Power FET with 200V DS Breakdown Voltage, ideal for SWITCHING applications. Featuring a max IDM of 46A and EAS of 810mJ, this ENHANCEMENT MODE transistor has a 0.47 ohm Drain-Source Resistance. Its small outline package and high power dissipation make it suitable for various industrial uses.
IRF640
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 125 W; Maximum Drain Current (Abs) (ID): 18 A; JESD-609 Code: e3;
IRLML0100TRPBF
International Rectifier
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Package Style (Meter): SMALL OUTLINE; JEDEC-95 Code: TO-236AB;
BSP315PH6327XTSA1
Infineon's BSP315PH6327XTSA1 is a P-CHANNEL FET with 60V DS Breakdown Voltage, ideal for power applications. Features include 4.68A IDM, 24mJ EAS, and 0.8 ohm RDS(ON). Suitable for automotive electronics due to AEC-Q101 compliance and high temp rating of 150°C.
SQJ469EP-T1_GE3
Vishay Intertechnology
Vishay Intertechnology's SQJ469EP-T1_GE3 is a P-CHANNEL FET with 80V DS Breakdown Voltage, 128A IDM, and 0.025 ohm RDS(ON). Ideal for power applications requiring high drain current capability in compact designs. Operating in enhancement mode, it offers efficient performance up to 175°C.
BSS123
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: TIN LEAD; Moisture Sensitivity Level (MSL): 1;
BSS138
Vishay Intertechnology's BSS138 is a N-CHANNEL FET with SINGLE configuration and ENHANCEMENT MODE operation. It features 0.35W power dissipation, METAL-OXIDE SEMICONDUCTOR tech, and 150°C max temp. Ideal for surface mount applications in various electronic circuits requiring efficient power management.
FDD4141_F085
Fairchild Semiconductor
FDD4141_F085 by Fairchild Semiconductor is a P-CHANNEL Power FET with 40V DS Breakdown Voltage and 100A IDM. Ideal for SWITCHING applications, it features a SINGLE configuration with BUILT-IN DIODE in a PLASTIC/EPOXY package. Operating from -55 to 150 °C, this MOSFET has 0.0123 ohm Drain-Source On Resistance.
SPW47N60C3
SPW47N60C3 by Infineon Technologies is a N-CHANNEL Power FET with 600V DS Breakdown Voltage. It features a Max Drain Current of 47A and 0.07 ohm On Resistance, suitable for high-power applications. Ideal for use in power supplies, motor control, and industrial equipment due to its high current handling capabilities.
IRFP460PBF
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 280 W; Package Style (Meter): FLANGE MOUNT; Case Connection: DRAIN;
FDMS86300DC
FDMS86300DC by Onsemi is a N-CHANNEL Power FET with 80V DS Breakdown Voltage, ideal for SWITCHING applications. It features 260A IDM Pulsed Drain Current, 0.0031 ohm RDS(ON), and 240mJ EAS Avalanche Energy Rating. With a max power dissipation of 125W and operating temperature up to 150°C, it is suitable for high-power switching circuits in various electronic devices.
IRFZ44NSTRL
IRFZ44NSTRL by International Rectifier is a power FET with N-channel polarity. It has a min DS breakdown voltage of 55V and can handle a max pulsed drain current of 160A. This transistor is commonly used for switching applications.
NDT3055L
NDT3055L by Onsemi is a N-CHANNEL FET with 60V DS Breakdown Voltage and 25A IDM. Ideal for SWITCHING applications, it features a SINGLE configuration with BUILT-IN DIODE in a RECTANGULAR package. Operating from -65 to 150 °C, it has 0.1 ohm Drain-Source Resistance and 3W Power Dissipation.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MMSF1310R2
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2.5 W; JESD-30 Code: R-PDSO-G8; Maximum Drain-Source On Resistance: .015 ohm;
MMSF3300R2
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .8 W; JESD-609 Code: e0; Maximum Drain-Source On Resistance: .0125 ohm;
MMSF3350R2
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2.7 W; Minimum DS Breakdown Voltage: 30 V; Package Shape: RECTANGULAR;
MMSF3P02HD
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2.5 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Operating Mode: ENHANCEMENT MODE;
MMSF3P02HDR1
P-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS; Surface Mount: YES; Maximum Power Dissipation (Abs): 2.5 W; Package Style (Meter): SMALL OUTLINE; Terminal Finish: TIN LEAD;
MMSF3P02HDR2
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2.5 W; Operating Mode: ENHANCEMENT MODE; JESD-30 Code: R-PDSO-G8;
MMSF3P02HDR2G
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2.5 W; Terminal Form: GULL WING; Package Body Material: PLASTIC/EPOXY;
MMSF3P03HDR2
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2.5 W; Maximum Drain Current (Abs) (ID): 4.6 A; Terminal Finish: TIN LEAD;
MMSF4205R2
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2.5 W; Maximum Pulsed Drain Current (IDM): 44 A; Transistor Application: SWITCHING;
MMSF4P01HDR1
P-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS; Surface Mount: YES; Transistor Element Material: SILICON; Minimum DS Breakdown Voltage: 12 V; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
MMSF4P01HDR2
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2.5 W; Terminal Finish: TIN LEAD; Qualification: Not Qualified;
MMSF5N02HDR2
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2.5 W; Terminal Finish: TIN LEAD; Terminal Form: GULL WING;
MMSF7N03HDR2
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2.5 W; Package Body Material: PLASTIC/EPOXY; Maximum Drain Current (ID): 8.2 A;
MMSF7N03ZR2
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2.5 W; Terminal Position: DUAL; Operating Mode: ENHANCEMENT MODE;
MMSF7P03HD
Power Field-Effect Transistors;
MMSF7P03HDR2
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2.5 W; Terminal Finish: Tin/Lead (Sn/Pb); Transistor Application: SWITCHING;
MMSF7P03HDR2G
MMSF7P03HDR2G by Onsemi is a P-CHANNEL FET with 30V DS Breakdown Voltage, 50A IDM, and 0.035 ohm RDS. Ideal for SWITCHING applications, it features a built-in diode, operates in ENHANCEMENT MODE, and has a max power dissipation of 2.5W.
MMSF5N02HD
Motorola
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS; Surface Mount: YES; Maximum Power Dissipation (Abs): 2 W; No. of Terminals: 8; Package Shape: RECTANGULAR;
MMSF5N03HD
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS; Surface Mount: YES; Maximum Power Dissipation (Abs): 2 W; JESD-609 Code: e0; Transistor Application: SWITCHING;
MMSF5N03HDR2
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS; Surface Mount: YES; Maximum Power Dissipation (Abs): 2.5 W; No. of Terminals: 8; Transistor Application: SWITCHING;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved