Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MC14046BDWG by Onsemi is a Phase Locked Loop (PLL) IC with 16 terminals, operating at -55 to 125°C. It has a supply voltage range of 3-18V and is suitable for military-grade applications requiring frequency synthesis circuits in compact SMD packages. The IC features CMOS technology, matte tin finish, and Gull Wing terminals on a small outline rectangular package.
Median Price
$0.587
Lifecycle Status
Suppliers In-Stock
24
In-Stock Inventory
1k+
Adafruit Industries
1+ parts
$0.696
100+ parts
$0.640
1k+ parts
$0.600
10k+ parts
-
Mouser Electronics
$1.150
$0.646
DigiKey
$1.200
$0.740
$0.624
$0.567
Rochester
$24.150
$22.700
$21.250
Avnet
Arrow
$0.337
Newark
$0.525
Verical
$0.572
$0.556
$0.471
Future Electronics
$0.320
$0.315
$0.290
Flip Electronics (Authorized)
Chip1Stop
$0.336
$0.249
$0.206
Digiode
$0.425
Nova Conductors
Vyrian
IBS Electronics
$0.477
$0.470
Flip Electronics
NAC Semi
$0.730
$0.664
Chip Stock
Bristol Electronics
ComSIT Distribution GmbH
ComSIT USA
LIBRA Elektronik GmbH
Semi Source
Prism Electronics
Ampacity Inc.
$0.309
Semicontronic
$0.301
$0.300
Corphita
$0.402
Corohmni
$0.433
Continental Prestige Electronics
$0.588
Argo Parts USA
$0.582
Advanced Electronics
Benley Electronics
$1.000
Aztec Data Supply Inc.
$6.183
TANS Electronics
SupplyDigital Components
Perfect Parts
Kepictronics
Lixinc
Problanco Electronics
Robosynatics
$24.200
Lucentia Tech
Kulean Microsystems
Cyclops Electronics Ltd (Excess)
ChipTracer
Netroflash
$0.570
$0.558
UHIMA Technologies
This material is commonly used in electronic components due to its durability and resistance to heat and moisture, making this product reliable for various applications.
Surface mount components are easier to assemble and offer better electrical performance compared to through-hole components, making this product more efficient and compact.
Operating at a standard voltage of 5V allows for compatibility with a wide range of systems and power sources, making this product versatile and easy to integrate.
With a high maximum operating temperature, this product can withstand harsh environmental conditions and maintain stable performance in demanding applications.
The compact width of this product allows for space-saving designs and integration into small electronic devices, making it ideal for applications with limited space.
Phase Locked Loops (PLL) & Frequency Synthesis Circuits MC14046BDWG attributes and parameters. Explore more Phase Locked Loops (PLL) & Frequency Synthesis Circuits devices from Onsemi
Additional Features:
Other IC type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage (Vsup):
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width (mm):
MC14046BDWG Other Function Semiconductors trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
1554216002
Molex
WIRE AND CABLE;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
NE555DR
Texas Instruments
NE555DR by Texas Instruments is an Analog Waveform Generation IC with 8 terminals, operating voltage of 5V, and power supplies ranging from 5-15V. It is a versatile component for pulse generation applications due to its small outline package and commercial temperature grade suitability.
BSS123-7-F
Diodes Incorporated
BSS123-7-F by Diodes Inc. is a N-channel FET with 100V DS breakdown voltage and 0.17A drain current. Ideal for switching applications, it features a single configuration with built-in diode, operates in enhancement mode, and has a max power dissipation of 0.3W.
M85049/85-08W02
TE Connectivity
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 175 Cel; Material: ALUMINUM ALLOY;
SMBJ18CA
Dc Components
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
DS18B20Z
Maxim Integrated
DS18B20Z by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring precise temperature monitoring in compact spaces.
Changzhou Galaxy Century Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Semtech Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BAV99
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Package Shape: RECTANGULAR; Minimum Input-Output Voltage Differential: 3 V;
2N7002
Infineon Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
RC0805FR-0710KL
Yageo
Yageo's RC0805FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. Ideal for applications requiring resistance to operate b/w -55°C to 155°C, such as in automotive electronics or industrial control systems. Features metal glaze/thick film technology and matte tin finish with nickel barrier.
1N4148
Grande Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM317T/NOPB
LM317T/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount with three terminals for easy installation.
SMMBT3904LT1G
Onsemi
SMMBT3904LT1G by Onsemi is a NPN BJT with 3 terminals, 0.3W power dissipation, and 40V max collector-emitter voltage. Ideal for small outline applications requiring a transistor with hFE of at least 30, it operates up to 150°C and has a transition frequency of 300MHz.
M24308/2-1F
Tyco Electronics Amp
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; IEC Conformity: NO; Mixed Contacts: NO; Empty Shell: NO;
1N4148WS
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
B340A-13-F
B340A-13-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 3A max output current, and 0.5V max forward voltage. It is used for efficiency applications in electronics due to its small outline package and high operating temperature range of -55°C to 150°C.
CRG0805F10K
TE Connectivity's CRG0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in various electronic circuits due to its compact size and high temperature rating.
TRF3761-CIRHATG4
TRF3761-CIRHATG4 by Texas Instruments is a PLL frequency synthesizer with 40 terminals, operating at -40 to 85°C. It has a supply voltage range of 4.5-5.25V and peak reflow temp of 260°C. Suitable for industrial applications requiring precise frequency synthesis in compact form factor.
TRF3761-KIRHAR
TRF3761-KIRHAR by Texas Instruments is a PLL frequency synthesizer with 40 terminals, operating at 5V. It features a square chip carrier package with a very thin profile and can withstand temperatures from -40 to 85°C. Ideal for industrial applications requiring precise frequency synthesis in compact designs.
LMX2331UTM
LMX2331UTM by Texas Instruments is a PLL frequency synthesizer with 20 terminals, operating at temperatures from -40 to 85°C. It has a supply voltage range of 2.7V to 5.5V and consumes up to 3.8mA of current, making it ideal for industrial applications requiring precise frequency synthesis in compact designs.
TLC2943IDBR
TLC2943IDBR by Texas Instruments is a PLL & Frequency Synthesis Circuit with 2 functions, operating at 3V. It comes in a small outline package, suitable for commercial applications. With a temperature range of -20 to 75°C, it offers precise frequency control in various electronic systems.
LMX2336USLBX
LMX2336USLBX by Texas Instruments is a PLL frequency synthesizer with 24 terminals, operating voltage range of 2.7V to 5.5V, and temperature range of -40°C to 85°C. It is designed for industrial applications requiring precise frequency synthesis in compact chip carrier package.
SN65LVDS150PWG4
SN65LVDS150PWG4 by Texas Instruments is a PLL frequency synthesizer with 28 terminals, operating at -40 to 85°C. It has a supply voltage range of 3-3.6V and peak reflow temperature of 260°C. This IC is ideal for industrial applications requiring precise frequency synthesis in compact designs.
UC3635N
The Texas Instruments UC3635N is a PLL frequency synthesizer IC with 16 terminals and a supply voltage range of 8-15 V. Operating temperature ranges from 0 to 70°C, making it suitable for commercial applications. The IC features bipolar technology in a rectangular plastic package, ideal for phase-locked loops and frequency synthesis circuits.
SN74LV4046ADRG4
SN74LV4046ADRG4 by Texas Instruments is a Phase Locked Loop IC with 16 terminals, operating voltage of 3-5V, and temperature range of -40 to 85°C. It is used for frequency synthesis circuits in industrial applications due to its compact size (9.9mm x 3.9mm) and low supply current (0.05mA).
UC3633DW
The Texas Instruments UC3633DW is a PLL frequency synthesizer with 16 terminals, operating voltage of 8-15V. It has a small outline package, suitable for commercial applications with temperature range of 0-70°C. The IC features bipolar technology and gull wing terminal form, making it ideal for phase locked loops and frequency synthesis circuits.
LMX2512LQ0967
LMX2512LQ0967 by Texas Instruments is a PLL frequency synthesizer with 28 terminals and a supply voltage range of 2.7V to 3.3V. It operates b/w -30°C to 85°C, has a peak reflow temperature of 260°C, and consumes up to 21mA. This chip carrier is ideal for applications requiring precise frequency synthesis in compact designs.
MM74HC4046N
MM74HC4046N by National Semiconductor is a Phase Locked Loop (PLL) IC with 16 terminals. It operates at supply voltages ranging from 2V to 6V and has a temperature range of -40°C to 85°C. This CMOS technology-based IC is commonly used in frequency synthesis circuits for industrial applications.
SN74LV4046ADR
SN74LV4046ADR by Texas Instruments is a Phase Locked Loop (PLL) IC with 16 terminals, operating at supply voltages of 3.3/5V. It features a CMOS technology, industrial temperature grade, and is suitable for frequency synthesis circuits in various applications.
ADF5356BCPZ-RL7
Analog Devices
Analog Devices' ADF5356BCPZ-RL7 is a PLL frequency synthesizer with 32 terminals, operating b/w -40 to 85°C. It features a nominal voltage of 3.3V and a compact square package suitable for industrial applications requiring precise frequency synthesis in tight spaces.
LMX2582RHAT
LMX2582RHAT by Texas Instruments is a PLL & Frequency Synthesis Circuit with 5500 GHz output frequency, 40 terminals, and 3.3V nominal voltage. Ideal for industrial applications requiring high-frequency precision in a compact chip carrier package.
LMX2336UTMX
LMX2336UTMX by Texas Instruments is a PLL frequency synthesizer with 20 terminals, operating voltage range of 2.7V to 5.5V, and temperature range of -40°C to 85°C. It comes in a small outline package suitable for industrial applications requiring precise frequency synthesis and phase-locked loop functionality.
CD74HCT7046AM96
Rca Solid State
PLL or Frequency Synthesis Circuits; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LMX2492QRTWTQ1
LMX2492QRTWTQ1 by Texas Instruments is a PLL frequency synthesizer with a max output freq of 14 GHz. Operating in automotive grade, it has a temp range of -40 to 125°C and requires Vsup b/w 3.15-3.45V. This chip carrier package with quad terminals is suitable for high-frequency applications.
CD54HCT4046AF3A
CD54HCT4046AF3A by Texas Instruments is a 16-terminal PLL & Frequency Synthesis Circuit with 5V supply voltage. It operates in temperatures from -55 to 125°C, suitable for military-grade applications. The CMOS technology and through-hole terminal form make it ideal for precision frequency control.
HMC704LP4E
Hittite Microwave
PHASE LOCKED LOOP; Temperature Grade: INDUSTRIAL; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES;
LMX2525LQX1321
LMX2525LQX1321 by Texas Instruments is a PLL frequency synthesizer with 24 terminals, operating voltage of 2.5-3.3V, and package style of chip carrier. It has a max supply current of 16.8mA, operates in temperatures from -30 to 85°C, and is suitable for phase-locked loops and frequency synthesis circuits.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MC14046BCPG
MC14046BCPG by Onsemi is a 16-terminal PLL & Frequency Synthesis Circuit with Vsup ranging from 3V to 18V. It operates in temperatures from -55°C to 125°C, ideal for military-grade applications. The CMOS technology and through-hole terminal form make it versatile for various electronic designs.
Rochester Electronics
PHASE LOCKED LOOP; Temperature Grade: MILITARY; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
MC145152DW2
Freescale Semiconductor
PLL FREQUENCY SYNTHESIZER; Temperature Grade: INDUSTRIAL; No. of Terminals: 28; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
NXP Semiconductors
MC145152DW2 by NXP Semiconductors is a PLL frequency synthesizer with 28 terminals, operating voltage range of 3-9V. It has a small outline package, suitable for industrial temperature grades (-40 to 85°C). With CMOS technology and gull wing terminals, it's ideal for phase-locked loops and frequency synthesis circuits.
Motorola
MC14046BDWR2G
MC14046BDWR2G by Onsemi is a 16-terminal PLL IC with Vsup of 5V, suitable for military-grade applications. It operates b/w -55 to 125 °C and supports supply voltages from 3-18V. With CMOS technology, it's ideal for Phase Locked Loop circuits in compact SMD packages.
MC145157DW2R2
PLL FREQUENCY SYNTHESIZER; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
MC145151P
PLL or Frequency Synthesis Circuits; Temperature Grade: INDUSTRIAL; No. of Terminals: 28; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
MC145151P2
PLL FREQUENCY SYNTHESIZER; Temperature Grade: INDUSTRIAL; No. of Terminals: 28; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
MC145152DW2R2
MC145152P2
MC14046BDW
PHASE LOCKED LOOP; Temperature Grade: MILITARY; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
MC14046BF
MC14046BFEL
MC14046BDWR2
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved