Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MC14046BDW by Onsemi is a Phase Locked Loop IC with 16 terminals, operating at -55 to 125 °C. It has a supply voltage range of 3-18 V and peak reflow temp of 235 °C. Widely used in frequency synthesis circuits due to its CMOS technology and military-grade temperature tolerance.
Median Price
$0.875
Lifecycle Status
Suppliers In-Stock
12
In-Stock Inventory
1k+
Vyrian
1+ parts
$0.600
100+ parts
-
1k+ parts
10k+ parts
Component Electronics Inc.
$1.150
$0.870
$0.750
Chip Stock
Digiode
LWI Electronics Inc
Prism Electronics
LIBRA Elektronik GmbH
Flex Direct, LLC
Elcom Components
Bristol Electronics
Mentor Electronics Marketing, LLC
Mil-Aero Solutions, Inc.
Corohmni
Component Stockers USA
$1.170
$1.120
$1.080
Problanco Electronics
TANS Electronics
Authorized Procurement Solutions
Kepictronics
Kulean Microsystems
Corphita
Perfect Parts
SupplyDigital Components
UHIMA Technologies
Plastic/epoxy material makes the package lightweight and durable, ideal for portable and rugged applications.
Surface mount capability makes the product easy to integrate into PCB designs, saving space and reducing assembly time.
Operating at a standard supply voltage of 5V makes it compatible with a wide range of systems and power sources.
With a high maximum operating temperature, this product can withstand harsh environmental conditions and operate reliably in demanding applications.
Military-grade temperature rating ensures stable performance in extreme temperature fluctuations, making it suitable for mission-critical and high-reliability applications.
Phase Locked Loops (PLL) & Frequency Synthesis Circuits MC14046BDW attributes and parameters. Explore more Phase Locked Loops (PLL) & Frequency Synthesis Circuits devices from Onsemi
Additional Features:
Other IC type:
JESD-30 Code:
JESD-609 Code:
Length:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage (Vsup):
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width (mm):
MC14046BDW Other Function Semiconductors trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
2N7002
Promax-johnton
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Terminal Form: GULL WING; Maximum Drain-Source On Resistance: 7.5 ohm; Minimum DS Breakdown Voltage: 60 V;
LM358DT
STMicroelectronics
LM358DT by STMicroelectronics is a dual operational amplifier with a max input offset voltage of 9000 uV. It operates at a nominal voltage of 5V and has a min voltage gain of 25000. This amplifier is commonly used in applications requiring high precision and low power consumption.
LM317T
Texas Instruments
LM317T by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. With a max output current of 1.5A, this through-hole package regulator is ideal for power supply designs where adjustable voltage levels are needed.
TCA6424ARGJR
TCA6424ARGJR by Texas Instruments is a CMOS parallel I/O port with 24 bits and 3 ports. It operates b/w -40 to 85°C, suitable for industrial applications. With a max clock frequency of 0.4 MHz, it offers low power consumption at only 0.03 mA supply current.
1N4148
Compensated Devices
RECTIFIER DIODE; Terminal Position: UPPER; Terminal Form: NO LEAD; No. of Terminals: 1; Surface Mount: YES; Package Shape: SQUARE;
LL4148
Rectron
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
M24308/2-1F
Air Electro
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; MIL Conformity: YES; Additional Features: STANDARD: MIL-DTL-24308;
BSS138
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
2N2222A
Digitron Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
MMBT3904LT1G
Onsemi
MMBT3904LT1G by Onsemi is a NPN BJT with max. collector-emitter voltage of 40V, hFE of 30, and fT of 300MHz. Ideal for small signal applications in electronics due to its compact size, high transition frequency, and low power dissipation capabilities.
Nexperia
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Wuxi Xuyang Electronic
Continental Device India
1N4148WS
Dc Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Raytheon Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Minimum DC Current Gain (hFE): 100; Maximum Turn On Time (ton): 35 ns;
Micropac Industries
Comset Semiconductors
Semitronics
FDV303N
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Transistor Application: SWITCHING; JESD-609 Code: e3;
CD4046BE
CD4046BE by Texas Instruments is a Phase Locked Loop (PLL) IC with 16 terminals. It operates b/w -55 to 125°C, with supply voltage ranging from 3-18V. Widely used in frequency synthesis circuits for military applications due to its CMOS technology and low supply current of 4mA.
LMX2615W-MPR
LMX2615W-MPR by Texas Instruments is a PLL & Frequency Synthesis Circuit with 15000 GHz output frequency, BICMOS technology, and 64 terminals. It operates b/w -25 to 25 °C, with a supply voltage range of 3.2V to 3.45V. Ideal for applications requiring precise frequency control in compact designs.
TLC2934IPWG4
TLC2934IPWG4 by Texas Instruments is a PLL & Frequency Synthesis Circuit with 14 terminals, operating at 3.3V. It has a temp range of -20 to 75°C and terminal finish of NiPdAu. Ideal for applications requiring small outline packages and thin profiles, such as communication systems and consumer electronics.
LMX2430TM
LMX2430TM by Texas Instruments is a PLL frequency synthesizer with 20 terminals, operating b/w -40 to 85°C. It has a supply voltage range of 2.25V to 2.75V and comes in a small outline package suitable for industrial applications. This surface-mount device features dual-position gull-wing terminals and is ideal for frequency synthesis circuits.
LTC6951IUHF-1#PBF
Analog Devices
LTC6951IUHF-1#PBF by Analog Devices is a PLL frequency synthesizer with 40 terminals, operating from -40 to 105°C. It has a supply voltage range of 3.15V to 3.45V and uses CMOS technology. This chip carrier package is suitable for applications requiring precise frequency synthesis in industrial settings.
UC3633J
The Texas Instruments UC3633J is a PLL frequency synthesizer IC with 16 terminals and a supply voltage range of 8V to 15V. Featuring a ceramic, glass-sealed rectangular package, it operates b/w 0°C to 70°C. Ideal for applications requiring precise frequency synthesis in commercial-grade environments.
TLC2932AIPW
TLC2932AIPW by Texas Instruments is a PLL & Frequency Synthesis Circuit with 5V supply, 55 GHz output frequency, and 14 terminals. It is used in applications requiring CMOS technology, such as commercial extended temperature grade systems. The package is small outline with thin profile and shrink pitch, suitable for surface mount assembly.
ADF4116BRUZ
ADF4116BRUZ by Analog Devices is a PLL frequency synthesizer with a supply voltage range of 2.7V to 5.5V. It operates in an industrial temperature range of -40°C to 85°C and has a small outline package style with dimensions of 4.4mm x 5mm. This IC is commonly used in phase locked loops and frequency synthesis circuits.
ADF4356BCPZ-RL7
Analog Devices' ADF4356BCPZ-RL7 is a PLL frequency synthesizer with 32 terminals, operating at -40 to 85°C. It has a square surface mount package, 3.15-3.45V supply voltage range, and is ideal for industrial applications requiring precise frequency synthesis in compact designs.
LMX2354SLBX
LMX2354SLBX by Texas Instruments is a PLL frequency synthesizer with 24 terminals in a chip carrier package. It operates at supply voltages of 2.7V to 5.5V, with a max current of 8.5mA. Ideal for industrial applications requiring precise frequency synthesis and phase-locked loop circuits.
8V97003NLGI8
Renesas Electronics
PHASE LOCKED LOOP; Moisture Sensitivity Level (MSL): 3; Peak Reflow Temperature (C): 260; Terminal Finish: TIN; JESD-609 Code: e3;
TRF3761-GIRHARG4
TRF3761-GIRHARG4 by Texas Instruments is a PLL frequency synthesizer with 40 terminals, operating at -40 to 85°C. It has a supply voltage range of 4.5-5.25V and peak reflow temp of 260°C. Ideal for industrial applications requiring precise frequency synthesis in compact form factor.
CD4046BF/3A
Rca Solid State
CD4046BF/3A by RCA Solid State is a Phase Locked Loop (PLL) & Frequency Synthesis Circuit with a ceramic package body material. It operates at power supplies of 5/15V and has 16 terminals in an in-line package style. This military-grade CMOS technology is commonly used for frequency synthesis and phase-locked loop applications.
LMX2430SLEX
LMX2430SLEX by Texas Instruments is a PLL frequency synthesizer with 20 terminals, operating b/w -40 to 85°C. It features a supply voltage range of 2.25V to 2.75V and comes in a square chip carrier package suitable for industrial applications requiring precise frequency synthesis.
LMX2512LQ0967/NOPB
LMX2512LQ0967/NOPB by Texas Instruments is a PLL frequency synthesizer with 28 terminals, operating voltage of 2.7-3.3V, and package style of very thin profile chip carrier. It has a temperature range of -30 to 85°C and max supply current of 21mA. Ideal for applications requiring precise frequency synthesis in compact designs.
LMX2323TMX
LMX2323TMX by Texas Instruments is a PLL frequency synthesizer with 16 terminals, operating at 2.7-5.5V, suitable for industrial applications. It features a small outline package with dimensions of 5x4.4mm and operates b/w -40 to 85°C temperature range. The device consumes a max current of 7mA at a nominal voltage of 3.3V, making it ideal for phase-locked loops and frequency synthesis circuits in various electronic systems.
MC44817D
Motorola
MC44817D by Motorola is a PLL frequency synthesizer with 1 function. It operates at a supply voltage range of 4.5V to 5.5V and has a small outline package style. This IC is commonly used in applications requiring phase-locked loops and frequency synthesis circuits.
TRF376115IRHAR
TRF376115IRHAR by Texas Instruments is a PLL & Frequency Synthesis Circuit with 40 terminals, operating at -40 to 85°C. It has a supply voltage of 5V and comes in a square chip carrier package. Ideal for industrial applications requiring precise frequency control and synchronization.
ADF4153BRUZ-RL7
ADF4153BRUZ-RL7 by Analog Devices is a PLL frequency synthesizer with 16 terminals, operating voltage of 2.7V to 3.3V, and max supply current of 24mA. It is designed for industrial applications requiring precise frequency synthesis in a compact rectangular package with surface mount capability.
MM74HC4046M
Rochester Electronics
PHASE LOCKED LOOP; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MC14046BDWG
PHASE LOCKED LOOP; Temperature Grade: MILITARY; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
MC14046BCPG
MC14046BCPG by Onsemi is a 16-terminal PLL & Frequency Synthesis Circuit with Vsup ranging from 3V to 18V. It operates in temperatures from -55°C to 125°C, ideal for military-grade applications. The CMOS technology and through-hole terminal form make it versatile for various electronic designs.
PHASE LOCKED LOOP; Temperature Grade: MILITARY; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
MC145152DW2
Freescale Semiconductor
PLL FREQUENCY SYNTHESIZER; Temperature Grade: INDUSTRIAL; No. of Terminals: 28; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
NXP Semiconductors
MC145152DW2 by NXP Semiconductors is a PLL frequency synthesizer with 28 terminals, operating voltage range of 3-9V. It has a small outline package, suitable for industrial temperature grades (-40 to 85°C). With CMOS technology and gull wing terminals, it's ideal for phase-locked loops and frequency synthesis circuits.
MC14046BDWR2G
MC14046BDWR2G by Onsemi is a 16-terminal PLL IC with Vsup of 5V, suitable for military-grade applications. It operates b/w -55 to 125 °C and supports supply voltages from 3-18V. With CMOS technology, it's ideal for Phase Locked Loop circuits in compact SMD packages.
MC145157DW2R2
PLL FREQUENCY SYNTHESIZER; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
MC145151P
PLL or Frequency Synthesis Circuits; Temperature Grade: INDUSTRIAL; No. of Terminals: 28; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
MC145151P2
PLL FREQUENCY SYNTHESIZER; Temperature Grade: INDUSTRIAL; No. of Terminals: 28; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
MC145152DW2R2
MC145152P2
MC14046BF
MC14046BFEL
MC14046BDW
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved