Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MC100EPT622FA by Onsemi is a voltage level translator with 10 functions, operating at 3.3V. It has a max delay of 0.875ns and interfaces LVTTL/LVCMOS to LVECL. Ideal for industrial applications requiring precise signal translation in compact spaces.
Median Price
$24.169
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Rochester
1+ parts
$39.750
100+ parts
$37.370
1k+ parts
$34.980
10k+ parts
-
DigiKey
Verical
$8.588
$7.688
$7.225
Vyrian
$6.710
Digiode
$7.258
Corohmni
Corphita
$6.876
Continental Prestige Electronics
$6.760
SupplyDigital Components
Authorized Procurement Solutions
Microchip USA
Kulean Microsystems
QUARKTWIN TECHNOLOGY LTD
TANS Electronics
Problanco Electronics
UHIMA Technologies
Surface mount design allows for efficient and space-saving installation on circuit boards.
Can handle high supply voltages, providing flexibility in application usage.
Offers versatility and capability to perform multiple functions within a single device.
Square package shape provides stability and ease of handling during installation.
Capable of operating in extremely low temperature environments, suitable for various industrial settings.
Provides fast signal translation with minimal delay, ensuring efficient performance.
Voltage Level Translators MC100EPT622FA attributes and parameters. Explore more Voltage Level Translators devices from Onsemi
Maximum Delay:
Interface IC Type:
JESD-30 Code:
JESD-609 Code:
Length:
No. of Bits:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Latch/Register:
Output Polarity:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
MC100EPT622FA Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Obsolescence/ EOL - Multiple Devices 10/Oct/2012
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
2N7002
Bytesonic Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Position: DUAL; Minimum Operating Temperature: -55 Cel;
1N4148WS
Rochester Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MMBT3904LT1G
Onsemi
MMBT3904LT1G by Onsemi is a NPN BJT with max. collector-emitter voltage of 40V, hFE of 30, and fT of 300MHz. Ideal for small signal applications in electronics due to its compact size, high transition frequency, and low power dissipation capabilities.
1N4148
Dc Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
RC0603FR-0710KL
Yageo
Yageo's RC0603FR-0710KL is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in electronics requiring precise resistance values.
2N2222A
Loras Industries
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
ABS06-32.768KHZ-T
Abracon
Abracon's ABS06-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 90000 ohm series resistance, and -40 to 85 °C operating temperature range. Ideal for applications requiring precise timing in compact designs like IoT devices and wearables.
Dionics-usa
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
FSMLF327
Fox Electronics
FSMLF327 by Fox Electronics is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing such as communication systems, industrial automation, and consumer electronics. Operating temperature range from -40 to 85 °C.
Micro Commercial Components
Small Signal Field-Effect Transistors; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .34 A; Package Style (Meter): SMALL OUTLINE;
MBR0530T1G
MBR0530T1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.375V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring high-speed switching in compact electronic devices like smartphones and tablets. The package style is small outline with gull wing terminals for surface mount assembly.
BAV99
Vishay Intertechnology
Vishay Intertechnology's BAV99 diode features a max forward voltage of 1.3V and a max output current of 0.15A, making it ideal for rectification applications. With a small outline package style and dual terminal position, this series-connected diode is designed for surface mount usage in various electronic circuits with an operating temperature range from -55°C to 150°C.
261
New England Microwave
Other Interface ICs; No. of Terminals: 14; Package Equivalence Code: FL14(UNSPEC); Power Supplies (V): +-5,-15; Package Body Material: PLASTIC/EPOXY; Surface Mount: YES;
Diotec Semiconductor Ag
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 10; Terminal Finish: MATTE TIN;
ABS25-32.768KHZ-T
Abracon's ABS25-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency, such as IoT devices and precision timing systems in industrial settings.
SS14
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FDN5618P
FDN5618P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage. It features a single configuration with built-in diode, suitable for switching applications. With 10A IDM and 0.17 ohm RDS(on), it operates in the temperature range of -55 to 150 °C, making it ideal for various electronic devices.
Daco Semiconductor
LM107H/883
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
MC10H351L
MC10H351L by Onsemi is a voltage level translator with 4 functions, operating b/w 4.75V to 5.25V. It has a max delay of 2.2ns and operates in temperatures from 0 °C to 75°C. Ideal for TTL/NMOS to ECL translation applications due to its complementary output polarity and ECL technology.
MC100EPT22DTR2G
MC100EPT22DTR2G by Onsemi is a voltage level translator with 2 functions, operating at 3.3V. It has a max delay of 0.7ns and interface IC type as TTL/CMOS to PECL translator. Ideal for industrial applications requiring precise signal translation in compact spaces.
FXMAR2102L8X
FXMAR2102L8X by Onsemi is a voltage level translator with 2 bits, operating b/w -40 to 85 °C. It has a max supply voltage of 5.5 V and min of 1.65 V, with output polarity as TRUE. Ideal for industrial applications requiring precise translation in compact spaces due to its very thin profile chip carrier package style.
SY100ELT22LZG
Micrel
TTL/CMOS TO PECL TRANSLATOR; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
10525M/B2AJC
10525M/B2AJC by Onsemi is a voltage level translator with 4 functions, MIL-STD-883 screening, and TOTEM-POLE output. Ideal for ECL to TTL translation in military-grade applications. Operates b/w -55 °C to 125°C, with 16 terminals in a chip carrier package.
SN100KT5542DWR
Texas Instruments
SN100KT5542DWR by Texas Instruments is a voltage level translator with 8 functions, operating b/w 4.5V to 5.5V. It features a small outline package style, with output polarity inverted and max delay of 3.6ns. Ideal for TTL to ECL translation applications due to its compact size and high-speed performance capabilities.
MC100ELT28DTR2G
MC100ELT28DTR2G by Onsemi is a voltage level translator with 2 functions, operating at -40 to 85 °C. It has a supply voltage range of 4.75-5.25 V and offers a max delay of 5.5 ns. Ideal for PECL-TTL/TTL-PECL translation in industrial applications due to its ECL technology and small outline package style.
PCA9517D
NXP Semiconductors
VOLTAGE LEVEL TRANSLATOR; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
MC100EPT20DR2G
MC100EPT20DR2G by Onsemi is a voltage level translator with 8 terminals and ECL technology. It operates b/w -40 to 85 °C, translating TTL/CMOS to PECL signals with a delay of 0.45 ns. Ideal for industrial applications requiring precise signal translation in compact designs.
MC100ELT25MNR4
MC100ELT25MNR4 by Onsemi is a voltage level translator with max supply voltage of 5.5V, operating temp range -40 to 85 °C, and max delay of 4.1ns. It's used for ECL to TTL translation in industrial applications due to its small outline package and dual terminal position.
DP8483J
The Texas Instruments DP8483J is a voltage level translator with 5 functions, operating b/w 4.5V to 5.5V. It features TTL to ECL translation, with inverted output polarity and open-emitter characteristics. Ideal for applications requiring fast response times and precise signal conversion in electronic circuits.
DP8480D-00R
The Texas Instruments DP8480D-00R is a voltage level translator with 5 functions, operating b/w -4.68V to 5.5V. It features ECL technology, 3-STATE output characteristics, and GULL WING terminals in a small outline package. Ideal for ECL to TTL translation applications with commercial extended temperature grade support up to 75°C.
MC100EPT20DG
MC100EPT20DG by Onsemi is a voltage level translator with 3.3V power supplies, operating from -40 to 85°C. It features TTL/CMOS to PECL translation, 0.45ns max delay, and ECL technology. Ideal for industrial applications requiring precise signal conversion in compact designs.
MC100ELT23DTG
MC100ELT23DTG by Onsemi is a voltage level translator with 2 functions, operating b/w -40 to 85 °C. It has a supply voltage range of 4.75-5.25 V and offers a max delay of 5.5 ns. Ideal for PECL to TTL translation in industrial applications due to its ECL technology and small outline package style.
NLV14504BDTR2G
NLV14504BDTR2G by Onsemi is a voltage level translator with 6 functions, operating b/w -55 to 125 °C. It has a supply voltage range of 3-18 V and max delay of 550 ns. Ideal for military-grade applications requiring TTL/CMOS to CMOS translation in compact spaces.
SN100KT5574NT
SN100KT5574NT by Texas Instruments is a voltage level translator with 8 functions, operating at 5.5V max supply voltage and -4.5V min supply voltage. It features an ECL to TTL interface IC type, suitable for commercial temperature grade applications requiring fast response times of 7.4ns.
MC10EPT20MNR4
MC10EPT20MNR4 by Onsemi is a voltage level translator with 3.3V power supply, 0.45ns max delay, and ECL technology. It is used for TTL/CMOS to PECL translation in industrial applications due to its small outline package and wide operating temperature range of -40 °C to 85°C.
DP8480D-00
The Texas Instruments DP8480D-00 is a voltage level translator with 5 functions, operating b/w -4.68V to 5.5V. It features ECL technology, 3-STATE output characteristics, and GULL WING terminal form. Ideal for ECL to TTL translation applications in commercial extended temperature environments.
MC10H124M
MC10H124M by Onsemi is a voltage level translator with 4 functions, operating at 5.25V max supply voltage and 3.1ns max delay. Ideal for TTL to ECL translation in commercial applications due to its compact size, dual terminal position, and complementary output polarity.
MC100ELT20DR2G
MC100ELT20DR2G by Onsemi is a voltage level translator with 8 terminals and 5V power supply. It operates b/w -40 to 85 °C, translating TTL/CMOS to PECL signals with a delay of 1.25ns. Ideal for industrial applications requiring precise signal translation in compact spaces.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MC100ELT22DR2G
MC100ELT22DR2G by Onsemi is a voltage level translator with 2 functions, operating b/w -40 to 85 °C. It has a supply voltage range of 4.75-5.25 V and output polarity is complementary. Ideal for TTL/CMOS to PECL translation in industrial applications due to its small outline package and totem-pole output characteristics.
MC100EPT23DTG
MC100EPT23DTG by Onsemi is a voltage level translator with 2 functions, operating at 3.3V. It has a max delay of 1.8ns and interface type PECL to TTL. Ideal for industrial applications requiring precise signal translation in compact spaces.
MC100EPT26DTG
MC100EPT26DTG by Onsemi is a voltage level translator with 3.3V power supply, 2.2ns max delay, and PECL to TTL interface. Ideal for industrial applications requiring ECL technology, it operates b/w -40 to 85°C with a peak reflow temperature of 260°C. The compact package features dual terminals in a small outline design for surface mount assembly.
MC100LVELT22DR2G
MC100LVELT22DR2G by Onsemi is a voltage level translator with 2 functions, operating at 3.3V. It has a max supply voltage of 3.8V and operates in industrial temperature range (-40 to 85°C). Ideal for TTL/CMOS to PECL translation applications due to its ECL technology and small outline package style.
MC100LVELT23DTG
PECL TO TTL TRANSLATOR; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE;
MC10H124FNG
TTL TO ECL TRANSLATOR; Temperature Grade: COMMERCIAL EXTENDED; Terminal Form: J BEND; No. of Terminals: 20; Package Code: QCCJ; Package Shape: SQUARE;
MC10ELT24DG
MC10ELT24DG by Onsemi is a voltage level translator with 8 terminals and ECL technology. It operates b/w -40 to 85 °C, translating TTL to ECL signals with a delay of 2 ns. Suitable for industrial applications, it has a compact rectangular package style ideal for surface mount designs.
MC100LVELT22DTG
MC100LVELT22DTG by Onsemi is a voltage level translator with a max supply voltage of 3.8V and a min supply voltage of 3V. It is commonly used as a TTL/CMOS to PECL translator in industrial applications.
MC100EPT21DR2G
MC100EPT21DR2G by Onsemi is a PECL to TTL translator with 3.3V supply, 2.25ns delay, and operates in industrial temperature range (-40 to 85 °C). It has dual terminals, matte tin finish, and small outline package suitable for voltage level translation applications.
MC100EPT25DG
ECL TO TTL TRANSLATOR; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
MC100LVELT22DG
MC100LVELT22DG by Onsemi is a voltage level translator with 2 functions, operating at 3.3V. It has a max delay of 0.6ns and operates in industrial temperature grade range (-40 to 85 °C). Ideal for TTL/CMOS to PECL translation applications due to its ECL technology and small outline package style.
MC10H124PG
TTL TO ECL TRANSLATOR; Temperature Grade: COMMERCIAL EXTENDED; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR;
MC100ELT22DG
MC100EP90DTG
ECL TO PECL TRANSLATOR; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: TSSOP; Package Shape: RECTANGULAR;
MC100EPT24DG
LVTTL/LVCMOS TO LVECL TRANSLATOR; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
MC100LVEL90DWG
ECL TO PECL TRANSLATOR; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: SOP; Package Shape: RECTANGULAR;
MC100EPT21DTG
MC100EPT21DTG by Onsemi is a voltage level translator with a max supply voltage of 3.6V and a min operating temperature of -40°C. It is commonly used as a PECL to TTL translator in industrial applications.
MC100ELT23DG
PECL TO TTL TRANSLATOR; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
MC10ELT21DG
MC100EPT622FAG
LVTTL/LVCMOS TO LVECL TRANSLATOR; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 32; Package Code: LQFP; Package Shape: SQUARE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved