Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LB1638MC by Onsemi is a Motion Control IC with 10 terminals, operating voltage range of 2.5V to 9V, and temp range of -20 °C to 75°C. It's a Brush DC Motor Controller in a small outline package suitable for commercial extended applications requiring precise motor control.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
TANS Electronics
Problanco Electronics
SupplyDigital Components
Corphita
Kulean Microsystems
Corohmni
UHIMA Technologies
This material is lightweight and durable, making the product easy to handle and resistant to damage during handling and operation.
Surface mount technology allows for easy integration onto PCBs, saving space and making assembly more efficient.
Operating at a commonly used voltage level ensures compatibility with a wide range of systems and power sources.
The compact size of the package allows for space-saving design and the shrink pitch design enhances thermal performance.
The high operating temperature range ensures stability and reliability in various environmental conditions.
The low minimum operating temperature allows for use in colder environments without compromising performance.
Dual terminal position provides flexibility in PCB layout and allows for easy connections to other components.
Narrow width enables efficient use of space on the PCB and allows for compact system design.
The low minimum supply voltage allows for operation in systems with lower power sources, increasing versatility.
Commercial extended temperature grade ensures reliable operation in a wide range of commercial applications.
Gull-wing terminals are easy to solder onto the PCB, providing a secure and reliable connection.
The tight terminal pitch allows for high-density mounting on the PCB, saving space and enabling complex designs.
Operating within a safe range of maximum supply voltage ensures long-term reliability and protects the IC from potential damage.
Motion Control ICs LB1638MC attributes and parameters. Explore more Motion Control ICs devices from Onsemi
Additional Features:
Other IC type:
JESD-30 Code:
Length:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Maximum Seated Height:
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage (Vsup):
Surface Mount:
Temperature Grade:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width (mm):
LB1638MC Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
SMBJ18CA
Good-ark Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
BSS138
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
1N4148W-T
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SSL-LXA228SRC-TR11
Lumex
SSL-LXA228SRC-TR11 by Lumex is a 1.9mm SINGLE COLOR LED with peak wavelength of 660nm and max forward current of 0.03A. Ideal for applications requiring SUPER RED light emission, such as indicator lights in electronic devices due to its clear lens and surface mounting feature.
BAV99-7-F
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM7805CT
Onsemi
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
LM358ADR
Texas Instruments
LM358ADR by Texas Instruments is an operational amplifier with 2 functions, featuring a max input offset voltage of 5000 uV and nominal voltage of 5V. Widely used in applications requiring high voltage gain, it operates within a temperature range of 0-70°C and offers frequency compensation for stability.
MBR0530T1G
MBR0530T1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.375V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring high-speed switching in compact electronic devices like smartphones and tablets. The package style is small outline with gull wing terminals for surface mount assembly.
2N2222A
Solid State Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
FDC5614P
MSKSEMI SEMICONDUCTOR
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2 W; Transistor Element Material: SILICON; Minimum DS Breakdown Voltage: 60 V;
LL4148
Itt Components
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .005 us; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Non Repetitive Peak Forward Current: 1 A;
1N4148WS
Diotec Semiconductor Ag
LM358N
NXP Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
M85049/85-08W02
Amphenol
CIRCULAR CONN ACCESSORY; Shell Sizes: 8; 9; IEC Conformity: NO; MIL-Connector Accessory Name: BAND LOCK ADAPTER; MIL Conformity: YES; DIN Conformity: NO;
2N7002,215
2N7002,215 by NXP Semiconductors is a small signal N-CHANNEL FET with a min DS breakdown voltage of 60V and max drain current of 0.3A. It is used for switching applications in enhancement mode, operates b/w -65 to 150 °C, and has a max power dissipation of 0.2W.
SS14
Jinan Jingheng Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358AN
Samsung
1N4148
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BAV99
Gec Plessey Semiconductors
2N7002
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Operating Mode: ENHANCEMENT MODE; Maximum Drain Current (ID): .115 A;
FSB50450A
Fairchild Semiconductor
AC MOTOR CONTROLLER; No. of Terminals: 23; Package Shape: RECTANGULAR; Surface Mount: NO; Length: 29 mm; Nominal Supply Voltage (Vsup): 15 V;
A3932SLDTR-T
Allegro MicroSystems
A3932SLDTR-T by Allegro MicroSystems is a Motion Control IC with 38 terminals, operating voltage of 18-50V, and temperature range of -20 to 85°C. Ideal for Brushless DC Motor control applications due to its small outline package and bipolar technology.
DRV8462DDWR
DRV8462DDWR by Texas Instruments is a Motion Control IC with 44 terminals and a supply voltage range of 4.5V to 65V. It features a max output current of 5A, operating temperature from -40°C to 125°C, and is ideal for stepper motor control applications.
A3977SEDTR-T
Allegro MicroSystems' A3977SEDTR-T is a Motion Control IC with 44 terminals and 2.5A max output current. Operating b/w -20 to 85°C, it supports supply voltages of 3-5.5V for stepper motor control applications in compact square chip carrier package.
A5932KLPTR-T
Allegro MicroSystems' A5932KLPTR-T is a Motion Control IC with 24 terminals, operating voltage range of 5.5V to 50V, and AEC-Q100 screening level. Ideal for AC motor control applications due to its compact size (7.8mm x 4.4mm) and wide temperature range (-40°C to 150°C).
E-L6219DSATR
STMicroelectronics
STMicroelectronics E-L6219DSATR is a Motion Control IC with 24 terminals, operating voltage of 5V, and max output current of 1A. Ideal for automotive applications, it features bipolar technology and supports stepper motor control with a temp range from -40 to 125°C.
DRV8350SRTVR
DRV8350SRTVR by Texas Instruments is a Motion Control IC with 32 terminals, operating at -40 to 125 °C. It features a supply voltage range of 9-75 V and supports up to 1 A output current. Ideal for automotive applications, this IC is designed as a Brushless DC Motor Controller in a compact square package suitable for surface mounting.
DRV8353HRTAR
DRV8353HRTAR by Texas Instruments is a Motion Control IC with 40 terminals, operating voltage range of 9-75V, and max output current of 1A. It is ideal for automotive applications due to its temp grade and brushless DC motor controller type. The IC features a compact square package shape with surface mount capability for easy integration.
DRV8301QDCARQ1
DRV8301QDCARQ1 by Texas Instruments is a Motion Control IC with 56 terminals, operating voltage range of 6-60V, and temp. range of -40 to 125°C. Ideal for automotive applications, it's a BLDC motor controller in a small outline package suitable for surface mount assembly.
DRV8703QRHBTQ1
DRV8703QRHBTQ1 by Texas Instruments is a Motion Control IC with 32 terminals, operating voltage range of 5.5V to 45V, and temperature grade suitable for automotive applications. It features a max operating temperature of 125°C, package style in chip carrier with very thin profile, and terminal finish in Nickel/Palladium/Gold. Ideal for stepper motor control systems requiring precise motion control in harsh environments.
A3950SLP-T
Allegro MicroSystems' A3950SLP-T is a Motion Control IC with 16 terminals, operating voltage range of 8-36V, and max output current of 2.8A. Ideal for Brush DC Motor Controllers, it features a small outline package with dual terminal position and matte tin finish.
DRV8308RHAT
Texas Instruments' DRV8308RHAT is a Motion Control IC with 40 terminals in a square package. It operates b/w -40 to 85°C, suitable for industrial applications. With a supply voltage range of 8.5-32V and output current up to 0.13A, it serves as a Brushless DC Motor Controller in various electronic systems.
DRV2605LTDGSRQ1
Texas Instruments' DRV2605LTDGSRQ1 is a Motion Control IC with 10 terminals, operating from -40 to 105°C. It supports supply voltages from 2V to 5.2V and outputs up to 5.5V for industrial applications like brush DC motor control in automotive systems.
DRV8837CDSGR
DRV8837CDSGR by Texas Instruments is a motion control IC with a supply voltage range of 1.8V to 7V and max output current of 1A. It features a small outline package, suitable for industrial applications like brush DC motor control due to its wide operating temperature range (-40°C to 85°C) and compact size (2mm x 2mm).
A3977SLPTR
Allegro MicroSystems' A3977SLPTR is a Motion Control IC with 28 terminals, operating at -20 to 85°C. It supports stepper motor control, offering a max output current of 2.5A at a supply voltage range of 3-5.5V. The small outline package with gull wing terminals and thin profile makes it suitable for various motion control applications requiring precise voltage regulation and thermal management.
A4915METTR-T
Allegro MicroSystems' A4915METTR-T is a Motion Control IC with 28 terminals in a square chip carrier package. It operates b/w -20 to 105°C, suitable for Brushless DC Motor Controllers. With a supply voltage range of 3-5.5V, it offers precise control and reliability for various motion control applications.
A4952ELYTR-T
Allegro MicroSystems' A4952ELYTR-T is a Motion Control IC with 8-40V power supplies, suitable for industrial applications. Featuring DMOS technology, it offers 2A max output current and operates in temperatures ranging from -40 to 85°C. This small outline IC with gull wing terminals is designed for brush DC motor control.
FSBB15CH60C
AC MOTOR CONTROLLER; No. of Terminals: 27; Package Shape: RECTANGULAR; Surface Mount: NO; Maximum Output Current: 15 A; Terminal Position: DUAL;
DRV8353SRTAR
DRV8353SRTAR by Texas Instruments is a Motion Control IC with 40 terminals, operating voltage range of 9-75V. It features a max output current of 1A, suitable for automotive applications. The IC has a compact square package shape and can withstand temperatures from -40 to 125°C.
A4954ELPTR-T
Allegro MicroSystems' A4954ELPTR-T is a Motion Control IC with 16 terminals, operating voltage range of 8-40V, and max output current of 2A. Ideal for industrial applications requiring precise control over brush DC motors. Package style: Small Outline, Heat Sink/Slug, Thin Profile.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LB1668
BRUSHLESS DC MOTOR CONTROLLER; Temperature Grade: COMMERCIAL EXTENDED; No. of Terminals: 10; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
LB1641
BRUSH DC MOTOR CONTROLLER; Temperature Grade: COMMERCIAL EXTENDED; No. of Terminals: 10; Package Code: SIP; Package Shape: RECTANGULAR; Surface Mount: NO;
LB1663
Motion Control Electronics; Temperature Grade: COMMERCIAL EXTENDED; No. of Terminals: 10; Package Code: SDIP; Package Shape: RECTANGULAR; Surface Mount: NO;
LB1662D(DIP10S)
Motion Control Electronics; Temperature Grade: OTHER; No. of Terminals: 10; Package Code: SDIP; Package Shape: RECTANGULAR; Surface Mount: NO;
LB1638M(MFP10S)
Motion Control Electronics; Temperature Grade: COMMERCIAL; No. of Terminals: 10; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LB1668-E
LB1638(DIP10S)
Motion Control Electronics; Temperature Grade: COMMERCIAL; No. of Terminals: 10; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
LB1641-E
Motion Control Electronics; Temperature Grade: COMMERCIAL; No. of Terminals: 10; Surface Mount: NO; Qualification: Not Qualified; Terminal Position: SINGLE;
LB1638MC-AH
BRUSH DC MOTOR CONTROLLER; Temperature Grade: COMMERCIAL EXTENDED; No. of Terminals: 10; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LB1662M(MFP16FS)
Motion Control Electronics; Temperature Grade: OTHER; No. of Terminals: 24; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LB1662D(MFP16FS)
LB1638(MFP10S)
LB1663M
Motion Control Electronics; Temperature Grade: COMMERCIAL EXTENDED; No. of Terminals: 24; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LB1638M
BRUSHLESS DC MOTOR CONTROLLER; Temperature Grade: COMMERCIAL EXTENDED; No. of Terminals: 10; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LB1638M-TLM-E
LB1638
BRUSHLESS DC MOTOR CONTROLLER; Temperature Grade: COMMERCIAL EXTENDED; No. of Terminals: 10; Package Code: SDIP; Package Shape: RECTANGULAR; Surface Mount: NO;
LB1638-E
LB1638M(DIP10S)
LB1662M(DIP10S)
LB1638MC
Sanyo Semiconductor
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved