Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LB1638M by Onsemi is a Motion Control IC with 5V Vsup, 0.5A output current, and 40mA Isup. Ideal for Brushless DC motor control applications due to its small outline package, dual terminal position, and commercial extended temperature grade.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Digiode
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Kepictronics
Problanco Electronics
SupplyDigital Components
Authorized Procurement Solutions
Kulean Microsystems
TANS Electronics
Assy Fe
Corphita
UHIMA Technologies
Corohmni
Plastic/Epoxy package body material provides good thermal insulation and protection for the IC, ensuring reliability and durability in various operating conditions.
Surface mount capability enables easy and efficient PCB assembly, saving time and effort during manufacturing.
Operates at a standard 5V supply voltage, making it compatible with many common power sources and reducing the need for additional voltage regulation components.
Can withstand high operating temperatures up to 75 °C, suitable for industrial and automotive applications where temperature fluctuations may occur.
Capable of delivering up to 0.5 A of output current, ideal for driving small to medium-sized motors with efficient power delivery.
Motion Control ICs LB1638M attributes and parameters. Explore more Motion Control ICs devices from Onsemi
Other IC type:
JESD-30 Code:
Length:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Current:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Current (Isup):
Nominal Supply Voltage (Vsup):
Surface Mount:
Technology:
Temperature Grade:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width (mm):
LB1638M Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
SS495ASP
Micro Switch
The Micro Switch SS495ASP is an analog circuit IC with a supply voltage range of 4.5V to 10.5V, suitable for automotive applications. Its package body material is plastic/epoxy, and it has a rectangular shape with three terminals. Operating temperature ranges from -40°C to 125°C, making it ideal for various automotive sensor and control systems.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
1N4148WT
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
IRLML6401TRPBF
Infineon Technologies
IRLML6401TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 12V DS Breakdown Voltage, 34A IDM, and 0.05ohm RDS(on). With a small outline package style, it operates in an ambient temperature range of -55 to 150 °C.
ISO1050DUBR
Texas Instruments
ISO1050DUBR by Texas Instruments is a network interface IC with 8 terminals, operating from -55 to 105°C. It features a small outline package, nickel palladium gold finish, and gull wing terminal form. Ideal for telecom applications requiring a 5V supply voltage and peak reflow temperature of 260°C.
2N2222A
STMicroelectronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
M85049/85-08W02
TE Connectivity
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 175 Cel; Material: ALUMINUM ALLOY;
LM107H/883
Linear Technology
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
LM358N
Intersil
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
SMBJ18CA
Rectron
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Multicomp Pro
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Diode Element Material: SILICON; Technology: AVALANCHE; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V;
Bytesonic Electronics
06035C103KAT2A
KYOCERA AVX
06035C103KAT2A by KYOCERA AVX is a SMT ceramic capacitor with 0.01uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for applications requiring compact surface mount capacitors with stable performance in a wide temperature range.
SN65HVD234DR
SN65HVD234DR by Texas Instruments is an 8-terminal interface circuit with a data rate of 1 Mbps. Operating temperature ranges from -40 to 125 °C, making it ideal for automotive applications. With a supply voltage of 3.3 V and low current draw of 6 mA, it's suitable for network interfaces in compact designs.
LL4148
Weitron Technology
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
TDK
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); No. of Phases: 1; No. of Elements: 1; Maximum Output Current: .2 A;
M39029/58360
Souriau
CONNECTOR ACCESSORY; Associated Military - Specifications: MIL-DTL-38999; Tool Settings: M22520/2-09; Terminal Type: CRIMP; MIL Conformity: YES; Mating Contacts: M39029/56348;
Synsemi
1N4148
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
OPA2227UA
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
A3950SEUTR-T
Allegro MicroSystems
Allegro MicroSystems' A3950SEUTR-T is a Motion Control IC with 8-36V power supplies, 2.8A output current, and -20 to 85°C operating temperature range. Ideal for Brushless DC Motor control applications due to its compact square package and quad terminal position.
TMC603A-LA
Microsemi
BRUSHLESS DC MOTOR CONTROLLER; No. of Terminals: 52; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES; Nominal Supply Voltage (Vsup): 5 V;
STGIPQ8C60T-HZ
STMicroelectronics' STGIPQ8C60T-HZ is a Motion Control IC with 26 terminals, operating b/w -40°C to 125°C. It features a nominal voltage range of 13.5V to 18V, making it ideal for automotive applications as an AC motor controller in hybrid technology.
L6472H
STMicroelectronics L6472H is a Motion Control IC with 36V Vsup, 7A max output current, and 45V max supply voltage. Ideal for stepper motor control applications due to its small outline package and dual terminal position.
IKCM15H60GAXKMA2
Infineon's IKCM15H60GAXKMA2 is a Motion Control IC with 24 terminals, operating voltage range of 14.5V to 18.5V, and max output current of 24A. Ideal for automotive applications due to its temp range of -40°C to 125°C and AC motor control capabilities in a compact rectangular package.
A5977GLPTR-T
Allegro MicroSystems' A5977GLPTR-T is a Motion Control IC with 28 terminals, operating temperature range of -40 to 105°C. It's a Stepper Motor Controller with max output current of 2.8A, suitable for industrial applications requiring precise motion control in compact spaces.
STSPIN32F0251TR
BRUSHLESS DC MOTOR CONTROLLER; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Peak Reflow Temperature (C): NOT SPECIFIED;
PDRV8424PWPR
The Texas Instruments PDRV8424PWPR is a Motion Control IC with 28 terminals, operating at -40 to 125°C. It features a 5V nominal voltage and can handle up to 2.5A output current. Ideal for automotive applications, this stepper motor controller comes in a small outline package with gull wing terminals.
STSPIN220
STSPIN220 by STMicroelectronics is a motion control IC with 1 function. It has a square package shape, 16 terminals, and a nominal voltage of 5V. This stepper motor controller is suitable for applications requiring precise motion control in compact spaces.
FSB50450TB
Fairchild Semiconductor
Fairchild Semiconductor's FSB50450TB is a Motion Control IC with 23 terminals, operating at 12-15V. It features a max output current of 3A and a nominal voltage of 13.5V. This AC Motor Controller has a compact MICROELECTRONIC ASSEMBLY package suitable for various motion control applications.
L6506D
L6506D by STMicroelectronics is a Motion Control IC with 20 terminals, operating voltage of 5V, and small outline package. Ideal for stepper motor control applications, it has a temperature range of 0-70°C and uses bipolar technology. With surface mount capability and compact dimensions (12.8mm x 7.5mm x 2.65mm), it offers precise motion control in various commercial settings.
FSB50450S
Onsemi
Onsemi's FSB50450S is a Motion Control IC with 23 terminals, operating at 13.5-16.5V. It offers a max output current of 3A and uses hybrid technology for AC motor control applications. The package style is microelectronic assembly in rectangular shape, suitable for surface mount assembly at peak reflow temperature of 245°C within 30s.
DRV8350RSRGZR
Texas Instruments' DRV8350RSRGZR is a Motion Control IC with 48 terminals, suitable for Brushless DC Motor control. It operates b/w -40 to 125°C, with a supply voltage range of 9-75V. The chip carrier package has a low profile and is surface mountable, making it ideal for automotive applications.
L6208PD
L6208PD by STMicroelectronics is a Motion Control IC with 36 terminals, operating voltage of 48V, and max output current of 5.6A. Ideal for automotive applications, this BCDMOS technology-based IC features a small outline package with a rectangular shape and gull wing terminals for precise stepper motor control.
DRV8848PWP
DRV8848PWP by Texas Instruments is a Motion Control IC with 16 terminals, operating voltage range of 4-18V, and max output current of 2A. Ideal for brush DC motor control applications, it features a small outline package with nickel palladium gold finish and can operate in industrial temperature range (-40 to 85°C).
L6234D
L6234D by STMicroelectronics is a Motion Control IC with 20 terminals, operating at a supply voltage range of 8-48V. It features a max output current of 2.5A and is designed for Brushless DC Motor control applications. The IC utilizes BCDMOS technology in a small outline package with gull wing terminals, making it suitable for compact designs requiring precise motor control.
TLE72093RAUMA1
Infineon's TLE72093RAUMA1 is a Motion Control IC for automotive applications. It operates b/w -40 to 125°C with Vsup ranging from 5V to 28V. This small outline, heat sink package has 20 terminals and is ideal for stepper motor control in tight spaces.
L6470PD
STMicroelectronics L6470PD is a Motion Control IC with 36V Vsup, 7A max output current, and bipolar technology. Ideal for stepper motor control applications, it features a small outline package, dual terminal position, and gull wing form factor.
MC33926PNBR2
Freescale Semiconductor
BRUSH DC MOTOR CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 32; Package Code: HQCCN; Package Shape: SQUARE; Surface Mount: YES;
DRV8801AQRMJRQ1
DRV8801AQRMJRQ1 by Texas Instruments is a Motion Control IC with 16 terminals in a square chip carrier package. It operates b/w -40 to 125°C, suitable for automotive applications. This DMOS technology controller has a max output current of 2.8A, making it ideal for brush DC motor control in compact designs.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LB1668
BRUSHLESS DC MOTOR CONTROLLER; Temperature Grade: COMMERCIAL EXTENDED; No. of Terminals: 10; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
LB1641
BRUSH DC MOTOR CONTROLLER; Temperature Grade: COMMERCIAL EXTENDED; No. of Terminals: 10; Package Code: SIP; Package Shape: RECTANGULAR; Surface Mount: NO;
LB1638MC
BRUSH DC MOTOR CONTROLLER; Temperature Grade: COMMERCIAL EXTENDED; No. of Terminals: 10; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LB1663
Motion Control Electronics; Temperature Grade: COMMERCIAL EXTENDED; No. of Terminals: 10; Package Code: SDIP; Package Shape: RECTANGULAR; Surface Mount: NO;
LB1662D(DIP10S)
Motion Control Electronics; Temperature Grade: OTHER; No. of Terminals: 10; Package Code: SDIP; Package Shape: RECTANGULAR; Surface Mount: NO;
LB1638M(MFP10S)
Motion Control Electronics; Temperature Grade: COMMERCIAL; No. of Terminals: 10; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LB1668-E
LB1638(DIP10S)
Motion Control Electronics; Temperature Grade: COMMERCIAL; No. of Terminals: 10; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
LB1641-E
Motion Control Electronics; Temperature Grade: COMMERCIAL; No. of Terminals: 10; Surface Mount: NO; Qualification: Not Qualified; Terminal Position: SINGLE;
LB1638MC-AH
LB1662M(MFP16FS)
Motion Control Electronics; Temperature Grade: OTHER; No. of Terminals: 24; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LB1662D(MFP16FS)
LB1638(MFP10S)
LB1663M
Motion Control Electronics; Temperature Grade: COMMERCIAL EXTENDED; No. of Terminals: 24; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LB1638M-TLM-E
BRUSHLESS DC MOTOR CONTROLLER; Temperature Grade: COMMERCIAL EXTENDED; No. of Terminals: 10; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LB1638
BRUSHLESS DC MOTOR CONTROLLER; Temperature Grade: COMMERCIAL EXTENDED; No. of Terminals: 10; Package Code: SDIP; Package Shape: RECTANGULAR; Surface Mount: NO;
LB1638-E
LB1638M(DIP10S)
LB1662M(DIP10S)
Sanyo Electric
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved