Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
BRUSHLESS DC MOTOR CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 16; Package Code: LSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
AZTECH Wire
$21.330
Component Stockers USA
$99.990
QUARKTWIN TECHNOLOGY LTD
Authorized Procurement Solutions
Microchip USA
SupplyDigital Components
TANS Electronics
Kepictronics
Kulean Microsystems
Corphita
Problanco Electronics
Corohmni
UHIMA Technologies
Motion Control ICs LB11660RV-MPB-H attributes and parameters. Explore more Motion Control ICs devices from Onsemi
Additional Features:
Other IC type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Current:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Current (Isup):
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage (Vsup):
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width (mm):
LB11660RV-MPB-H Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Obsolescence/ EOL - EOL 05/Feb/2016
PCN Design/Specification - Material Chg 21/Jan/2016
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
STM32F103C8T6
STMicroelectronics
STM32F103C8T6 by STMicroelectronics is a 32-bit microcontroller with 48 terminals, operating at up to 16 MHz. It features 10-Ch 12-Bit ADC channels and 7 DMA channels, suitable for industrial applications requiring low power consumption and high-speed connectivity via CAN, I2C(2), SPI(2), USART(3), USB.
EU2B-YS3203F
Idec
ROTARY SWITCH;
SMBJ18CA
General Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS123-7-F
Diodes Incorporated
BSS123-7-F by Diodes Inc. is a N-channel FET with 100V DS breakdown voltage and 0.17A drain current. Ideal for switching applications, it features a single configuration with built-in diode, operates in enhancement mode, and has a max power dissipation of 0.3W.
LM317T/NOPB
Texas Instruments
LM317T/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount with three terminals for easy installation.
BAV99
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Weitronic Enterprise
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N7002
Transys Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 60 V; Maximum Operating Temperature: 150 Cel;
KSZ9031RNXIA
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
1N4148WS
General Instrument
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Hitachi
LM358AN
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
FDD5614P
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 42 W; Terminal Position: SINGLE; Terminal Form: GULL WING;
Promax-johnton
STM32H743ZIT6
STM32H743ZIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications, offering features such as 21 timers, CAN and USB connectivity, and low power mode.
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
Mde Semiconductor
BSS138
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Qualification: Not Qualified;
2N2222A
Vpt Components
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Maximum Power Dissipation Ambient: .5 W;
Cheng-yi Electronic
FNB41060
Onsemi
FNB41060 by Onsemi is a motion control IC with 1 function. It operates at a nominal voltage of 15V and has a max output current of 15A. This IC is commonly used as an AC motor controller in various applications.
MC34931SEK
Freescale Semiconductor
BRUSH DC MOTOR CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 32; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
TMC260C-PA-T
Trinamic Motion Control & Kg
STEPPER MOTOR CONTROLLER; No. of Terminals: 44; Package Code: LFQFP; Package Shape: SQUARE; Surface Mount: YES; Minimum Supply Voltage (Vsup): 5 V;
DRV8805DWR
Texas Instruments' DRV8805DWR is a motion control IC with 20 terminals, operating at -40 to 85°C. It supports stepper motor control with a supply voltage range of 8.2-60V and output current up to 0.02A, making it ideal for industrial applications requiring precise motion control in compact spaces.
LV8080LP-TE-L-E
LV8080LP-TE-L-E by Onsemi is a Motion Control IC in PLASTIC/EPOXY package with 16 terminals. Operates at -30 to 85 °C, BICMOS tech, and Vsup of 3V. Ideal for motion control applications requiring precise voltage regulation and compact design.
SLA7076MPR
Allegro MicroSystems
Allegro MicroSystems' SLA7076MPR is a Motion Control IC with 23 terminals, operating voltage of 3-5.5V, and output current up to 1.5A. Ideal for stepper motor control applications, it has a temperature range of -20 to 85°C and peak reflow temp of 260°C.
DRV8802PWPR
Texas Instruments' DRV8802PWPR is a motion control IC with 24V nominal voltage and 1.6A max output current. Ideal for brush DC motor control applications, it features a small outline package style, industrial temperature grade, and surface-mount capability.
LV8413GP-E
LV8413GP-E by Onsemi is a Motion Control IC in PLASTIC/EPOXY package with 16 terminals. Operates at -30 to 85 °C, BICMOS tech, and supports 3.3V/5V power supplies. Ideal for motion control applications requiring precise voltage regulation.
DRV8876NRGTR
DRV8876NRGTR by Texas Instruments is a Motion Control IC with 16 terminals, operating voltage range of 4.5V to 37V, and max output current of 3.5A. This BRUSH DC MOTOR CONTROLLER is designed for automotive applications, featuring a compact square package shape and wide temperature range from -40°C to 125°C.
DRV8847RTET
DRV8847RTET by Texas Instruments is a Motion Control IC with 16 terminals, operating voltage range of 2.7V to 18V, and temp grade for automotive applications. It features a package style of CHIP CARRIER and is surface mountable. With a wide temp range from -40°C to 125°C, it's ideal for stepper motor control in automotive systems.
DRV8220DRLR
DRV8220DRLR by Texas Instruments is a Motion Control IC with 6 terminals, operating voltage range of 4.5V to 18V, and max output current of 1.76A. It is designed for brush DC motor control applications, featuring a small outline package and dual terminal position suitable for compact designs in robotics and automation systems. With a wide temperature range from -40°C to 125°C, it ensures reliable performance in various environments.
TMC246B-PA
TMC246B-PA by Trinamic: 44-terminal IC for stepper motor control. Operates at -40 to 125°C, with 3-5.5V supply voltage range and 7A output current. Ideal for automotive applications due to HVCMOS technology and low profile flatpack design.
L6219DS-T
Allegro MicroSystems' L6219DS-T is a Motion Control IC with 24 terminals, operating voltage of 5V, and max output current of 1A. Ideal for stepper motor control applications due to its bipolar technology, small outline package style, and dual terminal position. Operates b/w -20°C to 85°C temperature range.
LV8813G-AH
LV8813G-AH by Onsemi is a Motion Control IC with 20 terminals, operating voltage range of 6-16V. It's a Brushless DC Motor Controller suitable for industrial applications, offering max output current of 2A and low supply current of 7mA.
IRMCK171TY
Infineon Technologies
AC MOTOR CONTROLLER; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Peak Reflow Temperature (C): NOT SPECIFIED;
VNH2SP30TR-E
VNH2SP30TR-E by STMicroelectronics is a Motion Control IC with 30 terminals, operating at 9-16 V. It features a max output current of 30 A and supports brush DC motor control applications. The package style is small outline with heat sink, suitable for surface mount assembly in various electronic devices.
DRV8889QPWPRQ1
DRV8889QPWPRQ1 by Texas Instruments is a Motion Control IC with 24 terminals, operating voltage range of 4.5V to 45V, and temperature range from -40°C to 125°C. It is designed for automotive applications as a stepper motor controller with surface mount capability in a small outline package.
A4988SETTR-T
A4988SETTR-T by Allegro MicroSystems is a Motion Control IC with 2A output current, 3-5.5V supply voltage range, and DMOS technology. Ideal for stepper motor control applications due to its compact square package shape and low power consumption of 8mA at max.
A4950ELJTR-T
Allegro MicroSystems' A4950ELJTR-T is a Motion Control IC with 8 terminals, operating voltage range of 8-40V, and max output current of 3.5A. Ideal for industrial applications requiring precise control over brush DC motors in temperatures ranging from -40 to 85°C. Package style: Small Outline, Heat Sink/Slug, Low Profile.
PSS35S92F6-AG
Mitsubishi Electric
Mitsubishi Electric's PSS35S92F6-AG is a Motion Control IC with 24 terminals in RECTANGULAR package. It features AC MOTOR CONTROLLER type, 6mm max seated height, and 38x24 mm dimensions. Ideal for applications requiring precise motor control in compact spaces.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LB11600JV-TLM-E
BRUSHLESS DC MOTOR CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 30; Package Code: LSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LB11660FV-TLM-E
LB11660FV-TLM-E by Onsemi is a Motion Control IC with 16 terminals, operating voltage of 4-15V, and output current up to 1.5A. Ideal for Brushless DC Motor control applications, it features a compact rectangular package with low profile design and operates b/w -30 to 90°C temperature range.
LB11867RV-TLM-H
LB11851FA-BH
BRUSHLESS DC MOTOR CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 10; Package Code: TSSOP; Package Shape: SQUARE; Surface Mount: YES;
LB11696V-TLM-E
BRUSHLESS DC MOTOR CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 30; Package Code: LSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LB11696V-W-AH
LB11696V-MPB-E
LB11696V-TRM-E
LB11867FV-TLM-H
LB11651H
Motion Control Electronics; Temperature Grade: OTHER; No. of Terminals: 44; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LB11620T-MPB-E
BRUSHLESS DC MOTOR CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 24; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LB11660FV-MPB-E
LB11651-E
STEPPER MOTOR CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 14; Package Code: HSZIP; Package Shape: RECTANGULAR; Surface Mount: NO;
LB11620T
LB11660FV
LB11610P
Motion Control Electronics; Temperature Grade: INDUSTRIAL; No. of Terminals: 44; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LB11660FV-MPB-H
LB11600JV-MPB-E
LB11620GP
BRUSHLESS DC MOTOR CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 24; Package Code: VQCCN; Package Shape: SQUARE; Surface Mount: YES;
LB11620T-TLM-E
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved