Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FSFR1600XSL by Onsemi is a peripheral driver with built-in protections for over current, over voltage, and thermal issues. It features 9 terminals in a rectangular package style with matte tin finish. Ideal for applications requiring half bridge based peripheral drivers with source and sink output current flow direction.
Median Price
$1.650
Lifecycle Status
Suppliers In-Stock
13
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$2.530
100+ parts
$1.720
1k+ parts
$1.450
10k+ parts
$1.070
Rochester
-
$1.440
$1.200
DigiKey
$1.800
Verical
$1.500
$1.337
Flip Electronics (Authorized)
Digiode
$1.178
Nova Conductors
$1.250
Vyrian
Flip Electronics
DigiKey Marketplace
Chip Stock
ComSIT Distribution GmbH
ComSIT USA
Ampacity Inc.
$1.050
Corphita
$1.116
Corohmni
$1.240
Continental Prestige Electronics
$1.225
Netroflash
$1.187
$1.162
Argo Parts USA
Aztec Data Supply Inc.
$11.811
Metaverse IC Inc.
QUARKTWIN TECHNOLOGY LTD
Authorized Procurement Solutions
SupplyDigital Components
TANS Electronics
Microchip USA
Kulean Microsystems
Supply Digital
Assy Fe
Perfect Parts
Problanco Electronics
UHIMA Technologies
Kepictronics
Plastic/Epoxy material provides durability and resistance to heat, making this product suitable for long-term usage in various applications.
The built-in protections ensure the safety of both the driver and connected peripheral devices by preventing damage from overcurrent, overvoltage, and thermal issues.
Having 9 terminals allows for versatile connectivity options, making it compatible with a wide range of peripheral devices.
The flange mount package style provides easy installation and secure mounting, making it convenient for integration into various systems.
The matte tin finish provides corrosion resistance and a reliable electrical connection, ensuring consistent performance over time.
The zig-zag terminal position allows for efficient routing of connections, reducing the risk of signal interference and improving overall signal integrity.
The high peak reflow temperature of 260°C ensures proper soldering and reliable performance under extreme temperature conditions.
The through-hole terminal form provides a secure connection and easy soldering, making installation straightforward and ensuring long-term reliability.
The half bridge based interface IC type offers efficient power management and control, allowing for accurate and stable operation of peripheral devices.
The ability to both source and sink current allows for versatile control of peripheral devices, providing flexibility in designing and implementing various applications.
Peripheral Drivers FSFR1600XSL attributes and parameters. Explore more Peripheral Drivers devices from Onsemi
Built-in Protections:
Interface IC Type:
JESD-30 Code:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Output Current Flow Direction:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
FSFR1600XSL Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
1N4148
STMicroelectronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Config: SINGLE; Terminal Finish: Tin/Lead (Sn/Pb);
1N4148WS
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
LM358N
Motorola
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
BSS138
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 240;
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N2222A
Allegro MicroSystems
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM555CN
Harris Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
Cheng-yi Electronic
LM358AN
Samsung
Taitron Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
BSS138BKW,115
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Terminal Finish: TIN; No. of Terminals: 3; Additional Features: LOGIC LEVEL COMPATIBLE;
Multicomp Pro
LM317T
Fairchild Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Output Current-1: 1.5 A; No. of Outputs: 1; Qualification Status: Not Qualified;
LL4148
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N7002
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
BAV99
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Onsemi
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-PSFM-T3; Adjustability: ADJUSTABLE; Package Equivalence Code: SIP3,.1TB;
Taiwan Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Peak Reflow Temperature (C): 260; Maximum Operating Temperature: 175 Cel; JESD-609 Code: e3; No. of Elements: 1;
Diotec Semiconductor Ag
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 10; Terminal Finish: MATTE TIN;
BTS3256DAUMA1
Infineon Technologies
BTS3256DAUMA1 by Infineon is a 5-terminal peripheral driver with built-in protections for transient, over current, and over voltage. It operates at supply voltages b/w 5.5V to 30V, with a nominal output peak current limit of 55A. Ideal for applications requiring fast turn-on/off times and sink output current flow direction in compact designs.
IRS2004SPBF
IRS2004SPBF by Infineon is a peripheral driver with 8 terminals and built-in transient protection. It operates b/w -40 to 125 °C, suitable for automotive applications. With a supply voltage range of 10-20 V, it offers fast turn-on/off times (0.82/0.22 us) and supports source/sink current flow.
BTS428L2
Siemens
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 4; Package Shape: RECTANGULAR; Package Style (Meter): SMALL OUTLINE; Qualification: Not Qualified;
FPF2702MPX
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 8; Package Code: HVSON; Package Shape: SQUARE;
FSFR2100
HALF BRIDGE BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 9; Package Code: ZIP; Package Shape: RECTANGULAR;
TPS2H000BQPWPRQ1
Texas Instruments
TPS2H000BQPWPRQ1 by Texas Instruments is a Peripheral Driver with 2 functions, operating at -40 to 125 °C. It has built-in protections for transient, over current, thermal & under voltage. Ideal for automotive applications due to AEC-Q100 screening & high side driver feature.
IRS2011SPBF
IRS2011SPBF by Infineon Technologies is a Peripheral Driver with 8 terminals, operating voltage range of 10-20V, and built-in transient and under-voltage protections. It is designed for automotive applications, featuring a CMOS technology, small outline package style, and sink output current flow direction.
ITS711L1FUMA1
ITS711L1FUMA1 by Infineon Technologies is a peripheral driver with built-in protections for over current, over voltage, thermal, and under voltage. It operates b/w -30 to 85 °C with a supply voltage range of 5-34 V. This small outline package IC is ideal for buffer or inverter based applications requiring source and sink output current flow control.
VN808CM-32-E
STMicroelectronics' VN808CM-32-E is a peripheral driver with 8 functions, operating at 10.5-32V, offering thermal and under voltage protection. Ideal for automotive applications, it has a max supply voltage of 45V, turn-on time of 100us, and turn-off time of 150us.
ULN2003AIPWRE4
ULN2003AIPWRE4 by Texas Instruments is a 7-bit buffer/inverter peripheral driver with open-collector output. It features transient protection, sink current flow direction, and bipolar technology. Ideal for applications requiring inverted output polarity in a small outline package with 16 terminals.
TBD62083AFG
Toshiba
Toshiba's TBD62083AFG is an 8-bit buffer/inverter peripheral driver with a max output current of 0.4A, suitable for industrial applications. It operates b/w -40 to 85°C, with built-in transient protection and a terminal pitch of 1.27mm in a small outline package style.
FPF2108
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: LSSOP; Package Shape: RECTANGULAR;
L6202
STMicroelectronics L6202 is a full bridge peripheral driver with 18 terminals, operating voltage range of 12-48V. It features built-in thermal protection and supports up to 5A output current flow in source and sink direction. Ideal for applications requiring true output polarity control and standard input characteristics.
ISO1H812GXT
Infineon's ISO1H812GXT is a 36-terminal peripheral driver with a 2.2A output peak current limit in a small outline package. It features a half-bridge interface IC and sink output current flow direction, making it ideal for various applications requiring precise control of peripherals.
ULN2003D1013TR
STMicroelectronics ULN2003D1013TR is a 7-bit buffer/inverter peripheral driver with max supply voltage of 3V. It features open-collector output, transient protection, and sink current flow direction. Ideal for applications requiring fast turn-on/off times in a small outline package.
VN751S
STMicroelectronics' VN751S is a peripheral driver with 8-36V power supplies, built-in transient protection, and 2.7A output current limit. Ideal for automotive applications, it operates b/w -40 to 125°C and features a small outline package with gull wing terminals.
TPS27S100BPWPR
TPS27S100BPWPR by Texas Instruments is a peripheral driver with a max supply voltage of 40V and built-in protections for transient, over current, thermal, and under voltage. It operates in automotive temperature grades from -40 to 125°C and has a nominal output peak current limit of 7A. Ideal for high side driver applications with sink output current flow direction.
EL7156CSZ-T7A
Intersil
HALF BRIDGE BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
VNQ660SPTR-E
STMicroelectronics VNQ660SPTR-E is a MOS technology peripheral driver with 6A max output current. It operates at supply voltages of 6-36V and offers built-in protections against various faults. Ideal for applications requiring high current sink capabilities in compact designs.
IRS2106STRPBF
International Rectifier
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FSFR2100XS
FSFR2100XS by Onsemi is a half bridge peripheral driver with 9 terminals in a rectangular package. It offers over current, over voltage, thermal, and under voltage protection. Ideal for applications requiring source and sink output current flow control.
HALF BRIDGE BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 9; Package Shape: RECTANGULAR; Terminal Position: ZIG-ZAG; Package Body Material: PLASTIC/EPOXY;
FSFR2100XSL
FSFR2100XSL by Onsemi is a half bridge based peripheral driver with 9 terminals in a rectangular package. It offers over current, over voltage, and thermal protections. Ideal for applications requiring source and sink output current flow direction control.
HALF BRIDGE BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 9; Package Shape: RECTANGULAR; No. of Functions: 1; Terminal Finish: MATTE TIN;
FSFR2100 by Onsemi is a peripheral driver with 1 function. It offers built-in protections against over current, over voltage, and thermal issues. With a temperature range of -40 to 85 °C, it is suitable for industrial applications requiring a nominal voltage of 7.5 V.
FSFR2100U
HALF BRIDGE BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 9; Package Code: ZIP; Package Shape: RECTANGULAR; JESD-30 Code: R-XZIP-T9;
FSFR1600XSL
HALF BRIDGE BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 9; Package Shape: RECTANGULAR; Output Current Flow Direction: SOURCE AND SINK; JESD-30 Code: R-PZFM-T9;
FSFR1600XS
HALF BRIDGE BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 9; Package Shape: RECTANGULAR; Built-in Protections: OVER CURRENT; OVER VOLTAGE; THERMAL; JESD-609 Code: e3;
HALF BRIDGE BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 9; Package Shape: RECTANGULAR; Built-in Protections: OVER CURRENT; OVER VOLTAGE; THERMAL; Package Body Material: PLASTIC/EPOXY;
FSFR1800L
HALF BRIDGE BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 9; Package Code: ZIP; Package Shape: RECTANGULAR; JESD-609 Code: e3;
FSFR1700XSL
HALF BRIDGE BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 9; Package Shape: RECTANGULAR; Terminal Finish: Matte Tin (Sn) - annealed; Surface Mount: NO;
FSFR1800HS
HALF BRIDGE BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 9; Package Shape: RECTANGULAR; Peak Reflow Temperature (C): NOT SPECIFIED; Built-in Protections: OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE;
FSFR1700HS
HALF BRIDGE BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 9; Package Shape: RECTANGULAR; Output Current Flow Direction: SOURCE AND SINK; Package Body Material: UNSPECIFIED;
FSFR1800HSL
FSFR1800HSL by Onsemi is a 9-terminal peripheral driver with built-in protections for over current, over voltage, thermal, and under voltage. It features a half bridge based interface IC type and source/sink output current flow direction. Ideal for applications requiring reliable protection and control in a rectangular flange mount package style.
FSFR1800XS
HALF BRIDGE BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 9; Package Shape: RECTANGULAR; Terminal Finish: Matte Tin (Sn) - annealed; Peak Reflow Temperature (C): NOT SPECIFIED;
FSFR1700HSL
FSFR1700HSL by Onsemi is a 9-terminal peripheral driver with built-in protections for over current, over voltage, thermal, and under voltage. It features a half bridge interface IC type and source/sink output current flow direction. Ideal for applications requiring reliable power management in various electronic systems.
FSFR1800XSL
FSFR1800XSL by Onsemi is a peripheral driver with 9 terminals in a rectangular package. It offers over current, over voltage, and thermal protections. Ideal for half bridge based applications requiring source and sink output current flow control.
FSFR1700XS
HALF BRIDGE BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 9; Package Shape: RECTANGULAR; Terminal Position: ZIG-ZAG; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
FSFR1600L
HALF BRIDGE BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 9; Package Code: ZIP; Package Shape: RECTANGULAR; Terminal Finish: MATTE TIN;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved