Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LMG1020YFFT by Texas Instruments is a peripheral driver with 6 terminals, operating voltage range of 4.75V to 5.25V, and max output current of 7A. It features built-in thermal and under voltage protections, making it suitable for automotive applications requiring fast turn-on/off times and source/sink current flow direction control.
Median Price
$4.172
Lifecycle Status
Suppliers In-Stock
14
In-Stock Inventory
1k+
Arrow
1+ parts
$3.365
100+ parts
$3.017
1k+ parts
-
10k+ parts
Chip1Stop
$4.060
$2.980
$2.540
Texas Instruments
$4.140
$3.375
$2.250
Adafruit Industries
$3.963
Farnell
$4.680
$3.000
$2.880
Mouser Electronics
$5.330
$3.890
$3.300
Element14
$5.774
$4.416
$3.847
DigiKey
$6.110
$3.933
RS (Exports)
$4.241
Newark
$3.700
Verical
Digiode
$2.346
Nova Conductors
$4.260
Vyrian
Corphita
$2.223
Corohmni
$2.601
Ampacity Inc.
$2.690
Semicontronic
$2.623
$2.609
Component Stockers USA
$3.190
$2.930
$2.760
Continental Prestige Electronics
$3.611
$3.539
Argo Parts USA
Advanced Electronics
Netroflash
Parana Technologies
$8.412
$9.046
DigiPath Technology Company
$9.263
$8.522
ChromeModa Solutions
$9.452
$7.751
IDEA Electronic Components Group
$8.979
$8.507
Lixinc
Futuretech Components
Allen Electronics Distributors
$3.620
Alle Elektronik GmbH
The use of plastic/epoxy material in the package body makes the peripheral driver lightweight and durable, ideal for portable or rugged applications.
With a high maximum supply voltage of 5.25V, this peripheral driver can handle a wide range of input voltages, providing flexibility in various voltage applications.
The built-in thermal and under voltage protections ensure the safety and reliability of the peripheral driver, protecting it from potential damage due to excessive heat or low voltage conditions.
The high maximum output current of 7A allows the peripheral driver to drive power-hungry peripherals or components, making it suitable for demanding applications.
The automotive-grade temperature rating ensures that the peripheral driver can withstand harsh environmental conditions typically found in automotive applications, providing reliability and longevity.
Peripheral Drivers LMG1020YFFT attributes and parameters. Explore more Peripheral Drivers devices from Texas Instruments
Built-in Protections:
Interface IC Type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Channels:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Current Flow Direction:
Maximum Output Current:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Maximum Seated Height:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Turn-off Time:
Turn-on Time:
Width:
LMG1020YFFT Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.33.00.01
SB
8542.33.00.00
PCN Packaging - WCSP Pin Indicator 15/Jan/2021
Texas Instruments Inc. (TI) is one of the world's leading semiconductor companies and a global leader in analog and digital signal processing technology. The company has had a major impact on the electronics industry for over 80 years, manufacturing integrated circuits (ICs), software and subsystems that leverage high-performance computing capabilities. It offers an extensive portfolio of solutions for a wide range of industries, from aerospace to medical devices and consumer products to communication systems. Over its long history, TI has become synonymous with quality, reliability and innovation. Today, TI is one of the largest semiconductor companies in the world with operations in more than 30 countries across six continents.
President, CEO
Haviv Ilan
Chairman
Richard K. Templeton
Senior VP, CFO
Rafael R. Lizardi
M - Fab
Fabrication
Fab Initiation
1997
USA
South Portland
Wafer Capacity
32,000
D - FAB
1966
Dallas
42,000
D MOS - 6
2002
25,000
D MOS - 5
1995
75,000
Miho - 8
1980
Japan
Inashiki
43,000
S FAB 1
Sherman
91,000
F - FAB
2001
Germany
Freising
37,000
R Fab 1
2010
Richardson
40,000
D HC Line
1999
2,000
JV3
Aizu Wakamatsu
45,000
C - FAB
2007
China
Chengdu
30,000
L - Fab
2015
Lehi
70,000
R - Fab 2
2022
S - FAB 2
2025
S - FAB 3
2028
SMBJ18CA
Eic Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1554216004
Molex
WIRE AND CABLE;
M39029/58-360
Fct Electronic
CONNECTOR ACCESSORY; IEC Conformity: NO; Alternate Contact Sources: MILITARY; MIL Conformity: YES; Contact Gender: MALE; MIL-Connector Accessory Name: CONTACT;
BSS138NH6327XTSA2
Infineon Technologies
BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.
LM317AEMP/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Qualification Status: Not Qualified; Width: 3.56 mm;
2N2222A
Microsemi
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 30; No. of Elements: 1;
Nte Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Terminal Form: WIRE;
DRV5053VAQLPG
Texas Instruments DRV5053VAQLPG is a magnetic field sensor with 2.5-38V supply voltage range, -40 to 125°C operating temperature, and 0-2V output. Ideal for applications requiring Hall effect sensors like automotive, industrial automation, and robotics due to its compact size (1.52" x 4mm) and high output current capability of 2.3A.
BAV99
Panasonic
MIXER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
ST3485EBDR
STMicroelectronics
ST3485EBDR by STMicroelectronics is a Line Driver & Receiver with 3.3V power supply, EIA-422/EIA-485 interface standard, and 30ns max transmit delay. It is ideal for industrial applications requiring differential output and operates in temperatures ranging from -40 to 85°C.
USB3320C-EZK-TR
Microchip Technology
Microchip Technology's USB3320C-EZK-TR is a Bus Controller IC with 32 terminals, operating at 1.6-2V. It supports USB bus compatibility, clock frequency up to 60MHz, and CMOS technology. Ideal for applications requiring Universal Serial Bus peripherals in compact designs with low power consumption.
1N4148WS
Synsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Won-top Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LL4148
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
FDLL4148
Onsemi
FDLL4148 by Onsemi is a single rectifier diode with a max reverse recovery time of 0.004 us. With a max forward voltage of 1V and output current of 0.2A, it is ideal for applications requiring fast switching speeds in electronic circuits. The diode's glass package body material and isolated case connection make it suitable for surface mount designs operating at temperatures up to 175°C.
STM32F103C8T6
STM32F103C8T6 by STMicroelectronics is a 32-bit microcontroller with 48 terminals, operating at up to 16 MHz. It features 10-Ch 12-Bit ADC channels and 7 DMA channels, suitable for industrial applications requiring low power consumption and high-speed connectivity via CAN, I2C(2), SPI(2), USART(3), USB.
Bharat Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM317T
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Package Shape: RECTANGULAR; Minimum Input-Output Voltage Differential: 3 V;
LM358MX
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
RC0805FR-0710KL
Yageo
Yageo's RC0805FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. Ideal for applications requiring resistance to operate b/w -55°C to 155°C, such as in automotive electronics or industrial control systems. Features metal glaze/thick film technology and matte tin finish with nickel barrier.
NCV8460ADR2G
NCV8460ADR2G by Onsemi is a peripheral driver with built-in protections for transient, over current, over voltage, thermal, and under voltage. It operates within a supply voltage range of 6V to 36V and has a nominal output peak current limit of 9A. This buffer or inverter based driver is commonly used in automotive applications due to its AEC-Q100 screening level.
FPF2123
Fairchild Semiconductor
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: LSSOP; Package Shape: RECTANGULAR;
LMG1020YFFR
LMG1020YFFR by Texas Instruments is a peripheral driver with 6 terminals, operating voltage range of 4.75V to 5.25V, and max output current of 7A. Ideal for automotive applications, it offers built-in thermal and under voltage protections in a compact rectangular package with very thin profile. With fast turn-on/off times of 0.0041us/0.0043us, this IC is suitable for source/sink current flow direction requirements.
BTS50302EKAXUMA1
BTS50302EKAXUMA1 by Infineon Technologies is a peripheral driver with 14 terminals, built-in protections for transient, over current, and over voltage. It operates at supply voltages ranging from 5V to 28V and has a turn-on/off time of 230us. Ideal for automotive applications due to AEC-Q100 screening level and compact rectangular package design.
TLE6220GP
TLE6220GP by Infineon is a 20-terminal MOS driver with built-in protections for transient, over current, and over voltage. Operating at 5V with a max output current of 3A, it's ideal for automotive applications due to its AEC-Q100 screening level and small outline package style. With a turn-on/off time of 10us and sink output flow direction, it offers reliable performance in harsh environments.
ITS4880RCUMA1
ITS4880RCUMA1 by Infineon Technologies is a peripheral driver with 8 functions, built-in protections for transient, over current, and over voltage. It operates b/w -30 to 85 °C with a supply voltage range of 11-45 V. Ideal for applications requiring buffer or inverter based peripheral drivers in commercial extended temperature environments.
BSP752RXUMA2
BSP752RXUMA2 by Infineon is a Peripheral Driver with 8 terminals, MOS technology, and built-in protections against transient, over current, and over voltage. It operates b/w -40 to 85 °C with a supply voltage range of 6-52 V. Ideal for industrial applications requiring a small outline package style.
VN7003AHTR
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Peak Reflow Temperature (C): NOT SPECIFIED; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
NCP360MUTBG
NCP360MUTBG by Onsemi is a Peripheral Driver with 6 terminals, operating voltage range of 1.2V to 20V, and built-in protections against transient, over/under voltage. It has a small outline package style suitable for industrial applications requiring source output current flow direction and fast turn-off time of 1.5us.
UCC27201ADDAR
UCC27201ADDAR by Texas Instruments is a half bridge peripheral driver with 2 channels, capable of handling up to 3A output current. It operates in automotive-grade temperatures (-40 to 140°C) and has built-in under voltage protection. This small outline package (4.9mm x 3.9mm) is ideal for applications requiring true output polarity control and fast turn-on/off times (0.007us).
VN330SPTR-E
STMicroelectronics VN330SPTR-E is a 4-function peripheral driver with max supply voltage of 36V. It offers built-in protections for over current, thermal, and under voltage. Ideal for automotive applications due to its small outline package style and source output current flow direction.
IRS2153DPBF
International Rectifier
HALF BRIDGE BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
DRV103H
DRV103H by Texas Instruments is a peripheral driver with built-in protections for transient, over current, and thermal issues. It operates at supply voltages ranging from 8V to 24V and has a max supply voltage of 32V. With a small outline package style, it is ideal for industrial applications requiring a nominal output peak current limit of 3A.
ADP196ACBZ-01-R7
Analog Devices
ADP196ACBZ-01-R7 by Analog Devices is a peripheral driver with a max supply voltage of 5.5V and built-in protections against over current and thermal issues. It is commonly used as a buffer or inverter based peripheral driver for industrial applications.
BTS409L1E3062ABUMA1
BTS409L1E3062ABUMA1 by Infineon is a 6-terminal peripheral driver with built-in protections. It operates at a supply voltage range of 5-34 V and has a nominal output peak current limit of 7.5 A. Widely used in applications requiring source flow direction, such as automotive systems for efficient power management.
IRS2004SPBF
HALF BRIDGE BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
BTS50301EJAXUMA1
BTS50301EJAXUMA1 by Infineon is a peripheral driver with 8 terminals, offering built-in protections for transient, over current, and over voltage. It operates at supply voltages ranging from 8V to 18V and has a nominal output peak current limit of 5A. Ideal for automotive applications due to AEC-Q100 screening level.
TLE8444SLXUMA1
TLE8444SLXUMA1 by Infineon Technologies is a half bridge based peripheral driver with a nominal output peak current limit of 2.4A. It features source and sink output current flow direction, making it suitable for applications requiring precise control of power delivery. This small outline package with 24 terminals is designed for surface mount assembly in various electronic systems.
IRS21844STRPBF
IRS21844STRPBF by Infineon Technologies is a 14-terminal peripheral driver with built-in transient and under voltage protections. Operating at -40 to 125 °C, it has a turn-on time of 0.9 us and turn-off time of 0.4 us. Ideal for automotive applications due to its CMOS technology and half bridge based interface IC type.
BTS3408GXUMA1
BTS3408GXUMA1 by Infineon is a MOS peripheral driver with 60V max supply voltage, 0.55A output current limit, and 8us turn-on/off time. It's used for buffering or inverting signals in various applications requiring overcurrent, overvoltage, transient, and thermal protections.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
CC2662R1FTWRGZRQ1
CC2662R1FTWRGZRQ1 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU, 48 MHz clock frequency, and 81920 bytes of RAM. Ideal for industrial applications, it features 8 ADC channels, 32 DMA channels, and peripherals like AES and PWM for efficient system integration.
DRV3255EPAPRQ1
DRV3255EPAPRQ1 by Texas Instruments is a Motion Control IC with 64 terminals, operating at -40 to 150°C. It is an AEC-Q100 compliant automotive-grade IC for Brushless DC Motor control, supporting supply voltages from 5V to 90V and output currents up to 3.5A. The package style includes a flatpack with heat sink/slug, suitable for surface mount applications in automotive systems.
LMR43610MSC3RPERQ1
LMR43610MSC3RPERQ1 by Texas Instruments is a 9-terminal switching regulator with a max output voltage of 32V and max output current of 1A. Ideal for automotive applications, it operates b/w -40 to 150°C, featuring a buck switcher config and PWM control mode at up to 2200kHz frequency.
UCC27284DRCR
UCC27284DRCR by Texas Instruments is a MOSFET gate driver with 2 channels, capable of handling a max output current of 3.5A. It operates in automotive-grade temperatures (-40 to 125°C) and has a turn-on/off time of 30µs. This chip carrier package with very thin profile is suitable for high side driver applications requiring fast switching speeds.
DS160PT801ACBR
DS160PT801ACBR by Texas Instruments is a bus controller IC with 339 terminals, operating at -40 to 85°C. It supports PCI bus compatibility with a data transfer rate of 2000 MBps. This CMOS technology device has a thin profile and fine pitch package suitable for industrial applications.
TPS7A4301DGQR
TPS7A4301DGQR by Texas Instruments is an adjustable positive single output LDO regulator with a max output voltage of 14.5V and a dropout voltage of 0.6V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
DRV8316RRGFR
DRV8316RRGFR by Texas Instruments is a motion control IC with a rectangular package and a terminal form of gull wing. It has a max output current of 8A and can operate at temperatures ranging from -40 to 125°C. This IC is commonly used as a brushless DC motor controller in automotive applications.
LMG1210RVRT
LMG1210RVRT by Texas Instruments is a peripheral driver with 2 channels, capable of handling a max output current of 3A. It operates in automotive-grade temperatures (-40 to 125°C) and features built-in thermal and under voltage protections. This chip carrier package with very thin profile is suitable for applications requiring fast turn-on/off times and source/sink current flow control.
LMG1210RVRR
LMG1210RVRR by Texas Instruments is a peripheral driver with 2 channels, capable of handling a max output current of 3A. It operates in automotive-grade temperatures (-40 to 125°C) and has built-in thermal and under voltage protections. This chip carrier package with very thin profile is suitable for applications requiring fast turn-on/off times (0.018us) and source/sink current flow direction.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved