Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FQPF2N70 by Onsemi is a N-CHANNEL Power FET with 700V DS Breakdown Voltage, ideal for SWITCHING applications. It features 8A IDM, 140mJ EAS, and 28W Pd max. The transistor operates in ENHANCEMENT MODE with a max temperature of 150°C, suitable for high-power switching circuits.
Median Price
$0.916
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$1.500
100+ parts
$0.956
1k+ parts
$0.659
10k+ parts
$0.564
Rochester
-
$0.802
$0.665
$0.593
DigiKey
$1.000
Verical
$0.832
$0.742
Flip Electronics (Authorized)
Digiode
$0.624
Vyrian
$0.657
DigiKey Marketplace
Flip Electronics
Native Components
$0.429
$0.411
Northwest PG Solutions
$0.472
$0.416
Corphita
$0.591
Corohmni
Microchip USA
$4.095
Authorized Procurement Solutions
SupplyDigital Components
TANS Electronics
Problanco Electronics
Kulean Microsystems
A-Z Elektronik GmbH
Alle Elektronik GmbH
Supply Digital
Perfect Parts
Kepictronics
Assy Fe
UHIMA Technologies
The use of plastic/epoxy material in the package body makes the FET lightweight and durable, making it ideal for various applications where weight and durability are important factors.
The built-in diode enhances the functionality of the FET and allows for more efficient switching operations, making it a versatile component for different circuit designs.
With a high minimum breakdown voltage of 700V, this FET is suitable for applications requiring high voltage handling capabilities, ensuring reliable performance in demanding conditions.
The high maximum power dissipation rating of 28W enables the FET to handle higher power levels without overheating, making it a reliable choice for applications with high power requirements.
The FET's maximum operating temperature of 150°C allows it to operate efficiently in high-temperature environments without compromising its performance, making it suitable for a wide range of industrial applications.
Power Field Effect Transistors (FET) FQPF2N70 attributes and parameters. Explore more Power Field Effect Transistors (FET) devices from Onsemi
Avalanche Energy Rating (EAS):
Case Connection:
Configuration:
Minimum DS Breakdown Voltage:
Maximum Drain Current (Abs) (ID):
Maximum Drain Current (ID):
Maximum Drain-Source On Resistance:
Field Effect Transistor Technology:
JEDEC-95 Code:
JESD-30 Code:
JESD-609 Code:
No. of Elements:
No. of Terminals:
Operating Mode:
Maximum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Polarity or Channel Type:
Maximum Power Dissipation (Abs):
Maximum Pulsed Drain Current (IDM):
Qualification:
Sub-Category:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Transistor Application:
Transistor Element Material:
FQPF2N70 Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
BAV99
ROHM
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Eic Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
1N4148WT
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CRCW04020000Z0ED
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
1N4148
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Good-ark Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
MBRM140T1G
Onsemi
MBRM140T1G by Onsemi is a Schottky rectifier diode with 40V max repetitive peak reverse voltage, 1A max output current, and 0.3V max forward voltage. It is used in applications requiring small outline surface mount diodes for efficient power management.
2N2222A
Vpt Components
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Maximum Power Dissipation Ambient: .5 W;
General Transistor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148WT by Onsemi is a single rectifier diode with a max output current of 0.3A and forward voltage of 0.72V. It has a small outline package style, matte tin terminal finish, and operates at temperatures up to 150°C. Ideal for applications requiring fast reverse recovery time such as power supplies and signal demodulation circuits.
Yageo
LM358MX
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
LL4148
General Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
TM4C1294NCPDTI3
Texas Instruments
TM4C1294NCPDTI3 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU family. It features 8KB data EEPROM, 20-Ch 12-Bit ADC channels, and 32 DMA channels. Ideal for industrial applications requiring high-speed processing, it offers connectivity options like CAN, Ethernet, I2C, SPI, UART, and USB.
NDT2955
NDT2955 by Onsemi is a P-CHANNEL FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max IDM of 15A and EAS of 174mJ, suitable for ENHANCEMENT MODE operation. With a compact SMALL OUTLINE package and -55 to 150 °C operating range, it offers efficient power dissipation up to 3W.
Nte Electronics
BSS138LT1G
BSS138LT1G by Onsemi is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Operates b/w -55 to 150 °C with small outline package style for surface mount assembly.
M24308/2-1F
Souriau
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Body or Shell Style: RECEPTACLE; MIL Conformity: YES;
SPC TECHNOLOGY/ MULTICOMP
IRF640NSTRLPBF
Infineon Technologies
Infineon's IRF640NSTRLPBF is a N-CHANNEL FET with 200V DS Breakdown Voltage, ideal for SWITCHING applications. It features 72A IDM, 247mJ EAS, and 0.15 ohm RDS(ON). Operating from -55 to 175 °C, this MOSFET has a max power dissipation of 150W in a small outline package.
IRF7493TRPBF
International Rectifier
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2.5 W; Terminal Finish: MATTE TIN; No. of Elements: 1;
IRLML9303TRPBF
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.25 W; Package Body Material: PLASTIC/EPOXY; Transistor Application: SWITCHING;
IRF3205STRLPBF
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 200 W; Minimum DS Breakdown Voltage: 55 V; Additional Features: AVALANCHE RATED, HIGH RELIABILITY, ULTRA LOW RESISTANCE;
FQD11P06TM
FQD11P06TM by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, 37.6A IDM, and 0.185 ohm RDS(on). Ideal for SWITCHING applications, it features a SINGLE configuration with BUILT-IN DIODE in a RECTANGULAR package. Operating in ENHANCEMENT MODE, it has a max power dissipation of 38W at 150°C.
IRFB4115PBF
IRFB4115PBF by Infineon is a N-CHANNEL Power FET with 150V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max IDM of 420A and EAS of 830mJ, making it suitable for high-power operations. With an operating temperature up to 175°C and 0.011 ohm RDS(on), this transistor offers reliable performance in various industrial settings.
BSZ100N06LS3GXT
Infineon's BSZ100N06LS3GXT is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. Features include 80A IDM, 55mJ EAS, and 0.0179 ohm RDS(ON). Operating from -55 to 150 °C, it has a max power dissipation of 50W in a small outline package.
IRFP450PBF
Vishay Intertechnology's IRFP450PBF is a N-CHANNEL Power FET with 500V DS Breakdown Voltage and 56A IDM. Ideal for SWITCHING applications, it has a max power dissipation of 180W and operates in ENHANCEMENT MODE at up to 150°C.
FDV301N-NB9V008
Fairchild Semiconductor
FDV301N-NB9V008 by Fairchild Semiconductor is a N-CHANNEL FET with 0.5A max drain current and 0.35W max power dissipation in enhancement mode. Ideal for surface mount applications, it operates at up to 150°C making it suitable for various power management circuits.
SI4946BEY-T1-GE3
Vishay Siliconix
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3.7 W; Moisture Sensitivity Level (MSL): 1; Maximum Drain-Source On Resistance: .041 ohm;
NDT3055L
National Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; Terminal Form: GULL WING; Package Body Material: PLASTIC/EPOXY;
FQA36P15
FQA36P15 by Onsemi is a P-CHANNEL Power FET with 150V DS Breakdown Voltage and 144A IDM. Ideal for SWITCHING applications, it features a single configuration with built-in diode and 0.09 ohm Drain-Source On Resistance. Operating in ENHANCEMENT MODE, this transistor has a max power dissipation of 294W and can handle up to 36A drain current.
FDMS86263P
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 104 W; Package Style (Meter): SMALL OUTLINE; Maximum Pulsed Drain Current (IDM): 70 A;
BSC340N08NS3GATMA1
Infineon's BSC340N08NS3GATMA1 is a N-CHANNEL FET with 80V DS Breakdown Voltage, ideal for SWITCHING applications. Features include 92A IDM, 20mJ EAS, and 0.034 ohm RDS(on). Operating from -55 to 150 °C, this MOSFET has a max power dissipation of 32W in a small outline package.
Infineon's IRF7493TRPBF is a N-CHANNEL FET with 80V DS Breakdown Voltage and 74A IDM. Ideal for SWITCHING applications, it features a built-in diode, 0.015 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, this MOSFET has a max power dissipation of 2.5W at 150°C.
IRF540STRLPBF
Vishay Intertechnology's IRF540STRLPBF is a N-CHANNEL Power FET with 100V DS Breakdown Voltage. Ideal for SWITCHING applications, it features 110A IDM and 0.077 ohm RDS(on). With a max power dissipation of 150W, this MOSFET operates in ENHANCEMENT MODE at up to 175°C.
IRF3205LPBF
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 200 W; Peak Reflow Temperature (C): 260; No. of Elements: 1;
MSCSM170AM11CT3AG
Microchip Technology
MSCSM170AM11CT3AG by Microchip Technology is a N-CHANNEL FET with 1700V DS Breakdown Voltage, 480A IDM, and 0.0113 ohm RDS(on). It is used for SWITCHING applications in SERIES CONNECTED configuration. Operating from -40 to 175 °C, it features METAL-OXIDE SEMICONDUCTOR technology and SILICON CARBIDE material.
IRLML2030TRPBF
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Peak Reflow Temperature (C): 260; Transistor Element Material: SILICON;
FQB12P20TM
FQB12P20TM by Onsemi is a P-CHANNEL Power FET with 200V DS Breakdown Voltage, ideal for SWITCHING applications. Featuring a max IDM of 46A and EAS of 810mJ, this ENHANCEMENT MODE transistor has a 0.47 ohm Drain-Source Resistance. Its small outline package and high power dissipation make it suitable for various industrial uses.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FQPF3N80C
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 39 W; No. of Elements: 1; Qualification: Not Qualified;
FQPF27P06
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 47 W; No. of Elements: 1; Qualification: Not Qualified;
FQPF27P06 by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 68A IDM, 560mJ EAS, and 0.07 ohm RDS(ON). The transistor operates in ENHANCEMENT MODE with a max power dissipation of 47W at 175°C.
FQPF13N50CF
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 48 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Peak Reflow Temperature (C): NOT SPECIFIED;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 48 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Package Style (Meter): FLANGE MOUNT;
FQPF4N90C
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 47 W; JESD-609 Code: e3; Terminal Position: SINGLE;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 47 W; Package Style (Meter): FLANGE MOUNT; Transistor Element Material: SILICON;
FQPF5N60C
FQPF5N60C by Onsemi is a N-CHANNEL Power FET with 600V DS Breakdown Voltage. Ideal for SWITCHING applications, it has 18A IDM and 2.5ohm RDS(on). Its METAL-OXIDE SEMICONDUCTOR technology ensures reliable performance in ENHANCEMENT MODE operation up to 150°C.
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 33 W; Transistor Element Material: SILICON; Maximum Pulsed Drain Current (IDM): 18 A;
FQPF9P25
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 50 W; Qualification: Not Qualified; No. of Terminals: 3;
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 50 W; JESD-30 Code: R-PSFM-T3; No. of Elements: 1;
FQPF6N90C
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 56 W; Transistor Element Material: SILICON; JESD-30 Code: R-PSFM-T3;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 56 W; Maximum Pulsed Drain Current (IDM): 24 A; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
FQPF20N06L
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 30 W; Transistor Element Material: SILICON; No. of Terminals: 3;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 30 W; Operating Mode: ENHANCEMENT MODE; Avalanche Energy Rating (EAS): 170 mJ;
FQPF13N50C-F105
FQPF13N50C-F105 by Onsemi is a N-CHANNEL Power FET with 500V DS Breakdown Voltage, 52A IDM, and 860mJ EAS. Ideal for SWITCHING applications due to ENHANCEMENT MODE operation. RECTANGULAR package with THROUGH-HOLE terminals and METAL-OXIDE SEMICONDUCTOR technology.
FQPF13N50C_F105
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 48 W; No. of Terminals: 3; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
FQPF70N10
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 62 W; JESD-30 Code: R-PSFM-T3; Qualification: Not Qualified;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 62 W; Maximum Drain Current (Abs) (ID): 35 A; Package Style (Meter): FLANGE MOUNT;
FQPF7N65C
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 52 W; Terminal Position: SINGLE; JEDEC-95 Code: TO-220AB;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 52 W; No. of Elements: 1; Case Connection: ISOLATED;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved