Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FQPF13N50C-F105 by Onsemi is a N-CHANNEL Power FET with 500V DS Breakdown Voltage, 52A IDM, and 860mJ EAS. Ideal for SWITCHING applications due to ENHANCEMENT MODE operation. RECTANGULAR package with THROUGH-HOLE terminals and METAL-OXIDE SEMICONDUCTOR technology.
Median Price
-
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Digiode
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Nova Conductors
AZTECH Wire
$19.550
$18.780
$18.400
$18.030
Semicontronic
$49.050
$47.824
$47.578
Ampacity Inc.
$64.050
Component Stockers USA
$99.990
Continental Prestige Electronics
Argo Parts USA
Corphita
Kulean Microsystems
SupplyDigital Components
Supply Digital
Problanco Electronics
Corohmni
TANS Electronics
UHIMA Technologies
Bastille Electronics
This material provides durability and protection for the transistor, making it a reliable choice for various applications.
N-channel FETs typically have lower ON-resistance and higher switching speeds, making this transistor efficient for switching applications.
The built-in diode allows for more efficient switching and protection against reverse currents, making this transistor versatile and user-friendly.
Specifically designed for switching applications, this transistor offers consistent performance and reliability in controlling electrical signals.
With a high breakdown voltage, this transistor can handle high voltage loads, making it suitable for industrial and power equipment applications.
The rectangular shape of the package allows for easy mounting and integration into existing circuit designs, enhancing overall efficiency.
Through-hole terminals provide secure and stable connections, ensuring optimal performance and reliability in various operating conditions.
This mode allows for easy control of the transistor's ON/OFF state, providing precise and efficient operation for switching tasks.
With a high pulsed drain current rating, this transistor can handle heavy electrical loads, making it ideal for high-power applications.
The high avalanche energy rating indicates the transistor's capability to withstand voltage spikes and surges, ensuring long-term durability and reliability.
With three terminals, this transistor offers versatility in circuit configurations, allowing for a wide range of applications and design options.
The flange mount style provides convenient installation and secure mounting in various equipment and devices, ensuring stability and longevity.
This advanced technology offers high performance and efficiency, making this transistor a reliable choice for demanding applications.
Silicon is a widely-used semiconductor material known for its reliability and stability, ensuring consistent performance in various operating conditions.
The matte tin finish provides corrosion resistance and improved solderability, ensuring long-term reliability and connectivity for the transistor.
With a single terminal position, this transistor is easy to install and connect in circuits, simplifying the design and assembly process.
The isolated case connection enhances safety and reliability by preventing electrical interference and ensuring proper circuit operation.
Power Field Effect Transistors (FET) FQPF13N50C-F105 attributes and parameters. Explore more Power Field Effect Transistors (FET) devices from Onsemi
Avalanche Energy Rating (EAS):
Case Connection:
Configuration:
Minimum DS Breakdown Voltage:
Field Effect Transistor Technology:
JEDEC-95 Code:
JESD-30 Code:
JESD-609 Code:
No. of Elements:
No. of Terminals:
Operating Mode:
Package Body Material:
Package Shape:
Package Style (Meter):
Polarity or Channel Type:
Maximum Pulsed Drain Current (IDM):
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Transistor Application:
Transistor Element Material:
FQPF13N50C-F105 Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
SMBJ18CA
Telefunken Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
261
Deltrol Controls
Other Relays;
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
M39029/58-360
Carlisle Interconnect Technologies
GENERAL CONN ACCESSORY; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; Maximum Operating Temperature: 200 Cel; MIL-Connector Accessory: CONTACT; Terminal Type: CRIMP; MIL Conformity: YES;
06035C103KAT2A
KYOCERA AVX
06035C103KAT2A by KYOCERA AVX is a SMT ceramic capacitor with 0.01uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for applications requiring compact surface mount capacitors with stable performance in a wide temperature range.
1554216002
Molex
WIRE AND CABLE;
RC0603JR-070RL
Yageo
Yageo's RC0603JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. Its metal glaze/thick film technology and 0.1 W power dissipation make it ideal for jumper applications in various electronic devices.
IRLML6401TRPBF
Infineon Technologies
IRLML6401TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 12V DS Breakdown Voltage, 34A IDM, and 0.05ohm RDS(on). With a small outline package style, it operates in an ambient temperature range of -55 to 150 °C.
BAV99
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358AN
STMicroelectronics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
M24308/2-1F
Cinch Connectivity Solutions
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1750VAC; No. of Connectors: ONE; Body Depth: .375 inch;
FDN5618P
Onsemi
FDN5618P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage. It features a single configuration with built-in diode, suitable for switching applications. With 10A IDM and 0.17 ohm RDS(on), it operates in the temperature range of -55 to 150 °C, making it ideal for various electronic devices.
1N4148
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N7002
Itt Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Package Shape: RECTANGULAR;
2N7002-7-F
Diodes Incorporated
Diodes Inc. 2N7002-7-F is a N-channel FET with 60V DS breakdown voltage, 0.115A max drain current, and 13.5 ohm RDS(on). Ideal for switching applications in enhancement mode operation. Features Gull Wing terminals, small outline package style, and operates up to 150°C.
Lite-on Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Qualification: Not Qualified; Additional Features: LOW THRESHOLD; Minimum DS Breakdown Voltage: 60 V;
Rochester Electronics
Meritek Electronics
BAV99LT1G
BAV99LT1G by Onsemi is a series connected diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.006 us and can handle up to 100V repetitive peak reverse voltage. Ideal for rectification applications, this diode operates b/w -65°C to 150°C temperature range.
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
IRFH5010TRPBF
The Infineon Technologies IRFH5010TRPBF is a N-CHANNEL Power FET with 100V DS Breakdown Voltage and 0.009 ohm RDS(on). Ideal for SWITCHING applications, it features a 400A IDM and 227mJ EAS. This SINGLE transistor in PLASTIC/EPOXY package operates in ENHANCEMENT MODE at up to 150°C.
FDMS86263P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 104 W; Package Style (Meter): SMALL OUTLINE; Maximum Pulsed Drain Current (IDM): 70 A;
STP55NF06
STP55NF06 by STMicroelectronics is a N-CHANNEL FET with 60V DS Breakdown Voltage, 200A IDM, and 0.018 ohm RDS(on). Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE at up to 175°C, making it suitable for high-power tasks.
SQM120P10-10M1L_GE3
Vishay Intertechnology
Vishay Intertechnology's SQM120P10-10M1L_GE3 is a P-channel FET with 100V DS breakdown voltage, 480A IDM, and 0.0101 ohm RDS(on). Ideal for automotive applications due to AEC-Q101 standard compliance.
IRLML0100TRPBF
International Rectifier
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Package Style (Meter): SMALL OUTLINE; JEDEC-95 Code: TO-236AB;
IRLML6402TRPBF
IRLML6402TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 20V DS Breakdown Voltage, 22A IDM, and 0.065 ohm RDS(on). With a small outline package and matte tin finish, it operates in temperatures from -55 to 150 °C.
BUK9M85-60EX
Nexperia
BUK9M85-60EX by Nexperia is a N-channel power FET with 60V DS breakdown voltage and 12.8A max drain current. Ideal for switching applications, it features a built-in diode, 0.085 ohm max on resistance, and 51A pulsed drain current. Suitable for surface mount with Gull Wing terminals in a small outline package style.
IRF640
Vishay Siliconix
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Minimum DS Breakdown Voltage: 200 V; JESD-30 Code: R-PSFM-T3; Package Body Material: PLASTIC/EPOXY;
IRFZ44NS
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): 110 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Maximum Operating Temperature: 175 Cel;
PMV100EPAR
The Nexperia PMV100EPAR is a P-CHANNEL FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 9A IDM and 33mJ EAS, operating in ENHANCEMENT MODE at -55 to 175 °C. With a 0.13 ohm RDS(on), this transistor is suitable for various power management tasks in automotive and industrial sectors.
AUIRF3205ZSTRL
AUIRF3205ZSTRL by Infineon is a N-CHANNEL FET with 55V DS Breakdown Voltage, 440A IDM, and 0.0065 ohm RDS(on). Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE at up to 175°C, making it suitable for high-power tasks.
SI7431DP-T1-GE3
Vishay Intertechnology's SI7431DP-T1-GE3 is a P-CHANNEL FET for switching applications. Features include 200V DS breakdown voltage, 30A pulsed drain current, and 0.174 ohm max on-resistance. Ideal for high-power applications requiring efficient switching with a max operating temperature of 150°C.
IPA80R650CEXKSA2
Infineon's IPA80R650CEXKSA2 is a N-CHANNEL FET with 800V DS breakdown voltage, ideal for SWITCHING applications. Features include 24A IDM, 340mJ EAS, and 0.65 ohm RDS(on). Package style is FLANGE MOUNT with THROUGH-HOLE terminals.
IRF540PBF
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Minimum DS Breakdown Voltage: 100 V; Transistor Element Material: SILICON; Package Shape: RECTANGULAR;
FQT7N10LTF
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2 W; Minimum DS Breakdown Voltage: 100 V; Package Shape: RECTANGULAR;
SCT2280KEC
ROHM
ROHM's SCT2280KEC is a N-CHANNEL FET with 1200V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode and can handle up to 35A pulsed drain current. With a max power dissipation of 108W and operating temperature of 175°C, it offers reliable performance in various industrial settings.
IPT020N10N3ATMA1
IPT020N10N3ATMA1 by Infineon is a N-CHANNEL FET with 100V DS Breakdown Voltage, 1200A IDM, and 0.02 ohm RDS(on). Ideal for power applications requiring high drain current handling and low on-resistance. Suitable for use in power supplies, motor control, and automotive systems due to its high power dissipation capability.
FQD12N20LTM
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 55 W; Minimum DS Breakdown Voltage: 200 V; Terminal Form: GULL WING;
FQP30N06L
FQP30N06L by Onsemi is a N-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 128A IDM Pulsed Drain Current, 350mJ EAS Avalanche Energy Rating, and 0.045 ohm RDS(ON). The transistor operates in ENHANCEMENT MODE and has a max power dissipation of 79W at 175°C.
SI7489DP-T1-E3
Vishay Intertechnology's SI7489DP-T1-E3 is a P-CHANNEL FET with 100V DS Breakdown Voltage, 40A IDM, and 83W Power Dissipation. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with -55 to 150 °C temperature range.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FQPF27P06
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 47 W; No. of Elements: 1; Qualification: Not Qualified;
FQPF27P06 by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 68A IDM, 560mJ EAS, and 0.07 ohm RDS(ON). The transistor operates in ENHANCEMENT MODE with a max power dissipation of 47W at 175°C.
FQPF13N50CF
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 48 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Peak Reflow Temperature (C): NOT SPECIFIED;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 48 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Package Style (Meter): FLANGE MOUNT;
FQPF4N90C
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 47 W; JESD-609 Code: e3; Terminal Position: SINGLE;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 47 W; Package Style (Meter): FLANGE MOUNT; Transistor Element Material: SILICON;
FQPF5N60C
FQPF5N60C by Onsemi is a N-CHANNEL Power FET with 600V DS Breakdown Voltage. Ideal for SWITCHING applications, it has 18A IDM and 2.5ohm RDS(on). Its METAL-OXIDE SEMICONDUCTOR technology ensures reliable performance in ENHANCEMENT MODE operation up to 150°C.
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 33 W; Transistor Element Material: SILICON; Maximum Pulsed Drain Current (IDM): 18 A;
FQPF9P25
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 50 W; Qualification: Not Qualified; No. of Terminals: 3;
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 50 W; JESD-30 Code: R-PSFM-T3; No. of Elements: 1;
FQPF6N90C
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 56 W; Transistor Element Material: SILICON; JESD-30 Code: R-PSFM-T3;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 56 W; Maximum Pulsed Drain Current (IDM): 24 A; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
FQPF20N06L
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 30 W; Transistor Element Material: SILICON; No. of Terminals: 3;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 30 W; Operating Mode: ENHANCEMENT MODE; Avalanche Energy Rating (EAS): 170 mJ;
FQPF13N50C_F105
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 48 W; No. of Terminals: 3; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
FQPF70N10
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 62 W; JESD-30 Code: R-PSFM-T3; Qualification: Not Qualified;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 62 W; Maximum Drain Current (Abs) (ID): 35 A; Package Style (Meter): FLANGE MOUNT;
FQPF7N65C
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 52 W; Terminal Position: SINGLE; JEDEC-95 Code: TO-220AB;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 52 W; No. of Elements: 1; Case Connection: ISOLATED;
FQPF13N50C_G
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 48 W; Case Connection: ISOLATED; JESD-30 Code: R-PSFM-T3;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved