Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FQP6N40C by Onsemi is a N-CHANNEL Power FET with 400V DS Breakdown Voltage, ideal for SWITCHING applications. It features 24A IDM, 270mJ EAS, and 73W Max Power Dissipation. The transistor operates in ENHANCEMENT MODE with a max temperature of 150 °C, making it suitable for high-power switching circuits.
Median Price
$0.743
Lifecycle Status
Suppliers In-Stock
14
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
$0.716
1k+ parts
$0.594
10k+ parts
$0.530
Verical
$0.662
DigiKey
$0.900
Digiode
$0.267
Vyrian
$0.281
Freelance Electronics
$0.410
DigiKey Marketplace
Chip Stock
Flip Electronics
Cyclops Electronics Ltd
ComSIT Distribution GmbH
Bristol Electronics
EMSNET
Martec Srl
Corphita
$0.253
Corohmni
Native Components
$1.380
Continental Prestige Electronics
$1.450
$0.885
Northwest PG Solutions
$1.518
Andel Nordic
$9.551
$9.169
Infinite Electronics LLP (Excess)
Authorized Procurement Solutions
Kepictronics
SupplyDigital Components
TANS Electronics
Perfect Parts
Problanco Electronics
Supply Digital
Kulean Microsystems
iodParts Technologies Inc.
UHIMA Technologies
Provides good insulation and protection for the transistor, ensuring reliable performance and longevity.
N-channel FETs are commonly used for high-power applications, making this transistor suitable for switching operations.
The built-in diode simplifies circuit design and protects the transistor from reverse currents, enhancing overall efficiency.
Designed specifically for switching applications, ensuring optimal performance in such scenarios.
High breakdown voltage allows for operation in high voltage circuits, making this FET versatile and suitable for various applications.
Rectangular shape makes it easy to mount and integrate into circuit designs.
Through-hole terminals provide secure connections, making installation easier and more reliable.
Enhancement mode FETs offer easy control of the transistor, providing efficient switching operation.
High pulsed drain current allows for handling of sudden surges in current, making this FET suitable for demanding applications.
High avalanche energy rating ensures reliability in high-energy transient events, increasing overall robustness of the transistor.
Sufficient drain current capability for many common applications, ensuring stable operation under normal conditions.
Simple 3-terminal design makes connections straightforward and enhances ease of use.
High power dissipation capability allows for handling of significant power levels without overheating, ensuring reliability.
Flange mount package style offers secure mounting options and efficient heat dissipation, enhancing overall performance.
Metal-oxide semiconductor technology offers high efficiency and low gate drive requirements, making this FET a reliable choice for various applications.
High operating temperature tolerance allows for operation in elevated temperature environments, ensuring stability in challenging conditions.
Silicon material provides reliable performance and durability, making this FET a long-lasting solution for switching applications.
Matte tin finish ensures good electrical conductivity and solderability of terminals, enhancing overall reliability of connections.
Sufficient drain current rating for many applications, ensuring stable operation under normal conditions.
Low on-resistance minimizes power loss and improves efficiency, making this FET ideal for high-frequency switching applications.
Single terminal position simplifies connection and integration in circuits, enhancing overall ease of use and reliability.
Power Field Effect Transistors (FET) FQP6N40C attributes and parameters. Explore more Power Field Effect Transistors (FET) devices from Onsemi
Avalanche Energy Rating (EAS):
Configuration:
Minimum DS Breakdown Voltage:
Maximum Drain Current (Abs) (ID):
Maximum Drain Current (ID):
Maximum Drain-Source On Resistance:
Field Effect Transistor Technology:
JEDEC-95 Code:
JESD-30 Code:
JESD-609 Code:
No. of Elements:
No. of Terminals:
Operating Mode:
Maximum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Polarity or Channel Type:
Maximum Power Dissipation (Abs):
Maximum Pulsed Drain Current (IDM):
Qualification:
Sub-Category:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Transistor Application:
Transistor Element Material:
FQP6N40C Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
2N2222A
Micropac Industries
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
CRGCQ0805F10R
TE Connectivity
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
1N4148
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Operating Temperature: 175 Cel; Maximum Reverse Recovery Time: .004 us; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V;
OPA2277UA/2K5
Texas Instruments
OPA2277UA/2K5 by Texas Instruments is a dual operational amplifier with low offset voltage of 100 uV and micropower consumption of 0.004 uA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1 MHz. With a compact rectangular package style, it is suitable for surface mount designs in various electronic systems.
L7805CV
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Output Voltage-1: 5 V;
M24308/2-1F
Bel Fuse
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1750VAC; No. of Connectors: ONE; Mixed Contacts: NO;
LM2931AZ-5.0G
Onsemi
LM2931AZ-5.0G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.1A. It has a max dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature-sensitive environments up to 125°C. The package style is cylindrical with wire terminals, ideal for rail packing methods in various electronic devices.
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Peak Reflow Temperature (C): 260; No. of Phases: 1; Diode Element Material: SILICON;
LM317LMX/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Seated Height: 1.75 mm; Nominal Dropout Voltage-1: 3 V;
GRM155R71H103KA88D
Murata Manufacturing
The Murata Manufacturing GRM155R71H103KA88D is a ceramic capacitor with 0.01uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and high reliability.
1N4148WT
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2803A
Vishay Intertechnology
NPN; Configuration: COMPLEX; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; JESD-30 Code: R-PDIP-T18;
Central Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LL4148
Transys Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM107H
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;
BAV99
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; Maximum Reverse Recovery Time: .006 us;
DS18B20+
Analog Devices
DS18B20+ by Analog Devices is a 12-bit temperature sensor with 3.3/5V supply, -55 to 125°C range, and ±0.50°C accuracy. It features a 1-Wire interface for digital output and is commonly used in applications requiring precise temperature monitoring in various industries.
CRG0805F10K
TE Connectivity's CRG0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in various electronic circuits due to its compact size and high temperature rating.
2N7002,215
NXP Semiconductors
2N7002,215 by NXP Semiconductors is a small signal N-CHANNEL FET with a min DS breakdown voltage of 60V and max drain current of 0.3A. It is used for switching applications in enhancement mode, operates b/w -65 to 150 °C, and has a max power dissipation of 0.2W.
DS18B20U
Maxim Integrated
DS18B20U by Maxim Integrated is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
IRFR5505TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 57 W; JEDEC-95 Code: TO-252AA; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
NTMFS5C628NLT1G
NTMFS5C628NLT1G by Onsemi is a N-CHANNEL FET with 60V DS Breakdown Voltage, 900A IDM, and 0.0033 ohm RDS(on). It operates in Enhancement Mode and has a max power dissipation of 110W. Ideal for high-power applications requiring efficient switching capabilities.
IRFR024NTRPBF
Infineon Technologies
IRFR024NTRPBF by Infineon is a N-CHANNEL FET with 55V DS Breakdown Voltage, ideal for SWITCHING applications. It features 68A IDM, 71mJ EAS, and 0.075ohm RDS(ON). With a max power dissipation of 45W and operating temperature of 175°C, it's suitable for high-power electronic systems.
SI7157DP-T1-GE3
Vishay Intertechnology's SI7157DP-T1-GE3 is a P-channel FET with 20V DS breakdown voltage, 300A IDM, and 0.0016 ohm max RDS(on). Ideal for switching applications in enhancement mode operation. Features include built-in diode, small outline package style, and matte tin terminal finish.
IRFH5010TRPBF
The Infineon Technologies IRFH5010TRPBF is a N-CHANNEL Power FET with 100V DS Breakdown Voltage and 0.009 ohm RDS(on). Ideal for SWITCHING applications, it features a 400A IDM and 227mJ EAS. This SINGLE transistor in PLASTIC/EPOXY package operates in ENHANCEMENT MODE at up to 150°C.
ZXMP6A17GTA
Diodes Incorporated
ZXMP6A17GTA by Diodes Inc. is a P-CHANNEL FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 13.7A IDM, 4.1A ID, and 0.125 ohm RDS(ON). Operating in ENHANCEMENT MODE, it has a max power dissipation of 3.9W and can withstand temperatures up to 150°C.
JANTX2N6796U
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 25 W; Maximum Turn On Time (ton): 105 ns; Maximum Power Dissipation Ambient: 25 W;
IRF7749L1TRPBF
Infineon's IRF7749L1TRPBF is a N-CHANNEL FET with 375A ID, 125W power dissipation, and 175°C max temp. Ideal for high-power applications requiring single configuration surface mount technology.
IRFP460PBF
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 280 W; Operating Mode: ENHANCEMENT MODE; Terminal Position: SINGLE;
ZXMP6A17E6TA
Zetex Plc
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Terminal Finish: Matte Tin (Sn); Maximum Time At Peak Reflow Temperature (s): 40; Qualification: Not Qualified;
FDML7610S
The Onsemi FDML7610S is an N-CHANNEL Power FET with 2 SERIES elements and built-in diode. It has a Max Drain Current of 60A, Min DS Breakdown Voltage of 30V, and Max Pulsed Drain Current of 40A. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max power dissipation of 2.2W at a temperature up to 150°C.
SQJ469EP-T1_GE3
Vishay Intertechnology's SQJ469EP-T1_GE3 is a P-CHANNEL FET with 80V DS Breakdown Voltage, 128A IDM, and 0.025 ohm RDS(ON). Ideal for power applications requiring high drain current capability in compact designs. Operating in enhancement mode, it offers efficient performance up to 175°C.
MSC035SMA170B4
Microsemi
Power Field-Effect Transistors;
IRLML6402GTRPBF
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Minimum DS Breakdown Voltage: 20 V; Transistor Application: SWITCHING;
2N7002PS,115
2N7002PS,115 by NXP Semiconductors is an N-CHANNEL Power FET with 0.32A Max Drain Current and 0.99W Power Dissipation. It operates in ENHANCEMENT MODE and can withstand temperatures from -55 to 150 °C. Ideal for applications requiring high power efficiency in compact designs.
FQP47P06
FQP47P06 by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage and 47A Drain Current. Ideal for SWITCHING applications, it features an IDM of 188A, EAS of 820mJ, and 0.026 ohm RDS(ON). The transistor operates in ENHANCEMENT MODE with a max power dissipation of 160W at 175°C.
BSZ040N06LS5ATMA1
Infineon's BSZ040N06LS5ATMA1 is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 160A IDM, 117mJ EAS, and 0.004 ohm RDS(on). The transistor operates in ENHANCEMENT MODE and has a -55°C Min Operating Temp.
CSD18537NQ5A
CSD18537NQ5A by Texas Instruments is an N-CHANNEL power FET with a min DS breakdown voltage of 60V. It is used for switching applications and has a max pulsed drain current of 151A.
BSC060N10NS3G
BSC060N10NS3G by Infineon is a N-CHANNEL FET with 100V DS breakdown voltage, 360A IDM, and 0.006 ohm RDS(on). Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max power dissipation of 125W. This PLASTIC/EPOXY transistor has a small outline package style and can withstand temperatures up to 150°C.
IRF640
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 125 W; Avalanche Energy Rating (EAS): 580 mJ; Terminal Position: SINGLE;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FQP6N80C
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 158 W; JEDEC-95 Code: TO-220AB; Package Style (Meter): FLANGE MOUNT;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 158 W; Package Body Material: PLASTIC/EPOXY; Transistor Element Material: SILICON;
FQP65N06
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Package Shape: RECTANGULAR; No. of Terminals: 3; Package Body Material: PLASTIC/EPOXY;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Terminal Position: SINGLE; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Transistor Element Material: SILICON;
FQP630TSTU
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Operating Mode: ENHANCEMENT MODE; JESD-30 Code: R-PSFM-T3; Transistor Element Material: SILICON;
FQP6N40CF
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 73 W; Maximum Drain Current (Abs) (ID): 6 A; Transistor Element Material: SILICON;
FQP6N60C
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Qualification: Not Qualified; JEDEC-95 Code: TO-220AB; Additional Features: FAST SWITCHING;
FQP6N70
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Drain-Source On Resistance: 1.5 ohm; Terminal Finish: TIN; Terminal Form: THROUGH-HOLE;
FQP6N80
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 158 W; Terminal Position: SINGLE; Maximum Pulsed Drain Current (IDM): 23.2 A;
FQP6N90C
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 167 W; Transistor Element Material: SILICON; No. of Terminals: 3;
FQP6N45
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 98 W; Transistor Element Material: SILICON; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
FQP6N40J69Z
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Drain Current (ID): 5.5 A; Avalanche Energy Rating (EAS): 330 mJ; Transistor Element Material: SILICON;
FQP6N40
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 85 W; Package Style (Meter): FLANGE MOUNT; Maximum Operating Temperature: 150 Cel;
FQP6N45J69Z
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Pulsed Drain Current (IDM): 25 A; Qualification: Not Qualified; No. of Elements: 1;
FQP6N80J69Z
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; No. of Terminals: 3; Maximum Pulsed Drain Current (IDM): 23.2 A; Maximum Drain Current (ID): 5.8 A;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 158 W; Maximum Drain-Source On Resistance: 1.95 ohm; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
FQP6N40CF_NL
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Avalanche Energy Rating (EAS): 270 mJ; Maximum Pulsed Drain Current (IDM): 24 A; JEDEC-95 Code: TO-220AB;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 167 W; Maximum Drain-Source On Resistance: 2.3 ohm; Avalanche Energy Rating (EAS): 650 mJ;
FQP6N40C
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 73 W; Package Body Material: PLASTIC/EPOXY; Package Shape: RECTANGULAR;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 73 W; Maximum Pulsed Drain Current (IDM): 24 A; No. of Elements: 1;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved