Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FQP47P06 by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage and 47A Drain Current. Ideal for SWITCHING applications, it features an IDM of 188A, EAS of 820mJ, and 0.026 ohm RDS(ON). The transistor operates in ENHANCEMENT MODE with a max power dissipation of 160W at 175°C.
Median Price
$5.100
Lifecycle Status
Suppliers In-Stock
28
In-Stock Inventory
1k+
Arrow
1+ parts
$2.188
100+ parts
$1.617
1k+ parts
$1.586
10k+ parts
-
Chip1Stop
$3.480
$1.730
$1.520
$1.510
Mouser Electronics
DigiKey
$5.310
$2.509
$2.076
Element14
$5.370
$2.710
$2.430
Newark
$5.490
$3.000
$2.870
Verical
$1.627
$1.595
EBV Elektronik
Bristol Electronics
$1.238
$0.495
Digiode
$1.596
Nova Conductors
$2.609
TME
$4.130
$2.010
Forefront Electronics and Design
$4.900
Component Electronics Inc.
$7.690
$5.770
$5.000
NAC Semi
$5.360
$4.870
Flip Electronics
Chip Stock
Cyclops Electronics Ltd
R&J Components
Vyrian
Sensible Micro Corp
ComSIT Distribution GmbH
ACDS - Activité Composants Distribution Service
Dan-Mar Components
Partservice
$2.340
$2.278
Micros sp.j. W. Kędra i J. Lic
$2.507
$2.440
LIBRA Elektronik GmbH
Speed Components Ltd
Aztec Data Supply Inc.
$1.189
Semicontronic
$1.380
$1.346
$1.339
Decca Corp
$1.352
Corphita
$1.512
Corohmni
$1.530
Advanced Electronics
$1.549
$1.472
Bastille Electronics
$2.479
$2.355
$2.322
Continental Prestige Electronics
$2.557
Argo Parts USA
Ampacity Inc.
$2.910
Microchip USA
$22.170
RC Electronics
$1.910
$1.740
$1.690
Perfect Parts
Robosynatics
$1.217
$1.192
Lucentia Tech
Kepictronics
Kulean Microsystems
Lixinc
SupplyDigital Components
Problanco Electronics
A-Z Elektronik GmbH
Authorized Procurement Solutions
Alle Elektronik GmbH
TANS Electronics
Futuretech Components
Supply Digital
UHIMA Technologies
iodParts Technologies Inc.
Speed Components Ltd (Excess)
Computer Components Inc. - USA
The use of plastic/epoxy material in the package body makes the product lightweight and durable, ideal for applications where weight and durability are key factors.
P-channel FETs are known for their high input impedance and lower input capacitance, making them suitable for high-speed switching applications.
The built-in diode helps in protecting the circuit from back EMF spikes, improving reliability and efficiency in switching applications.
Designed specifically for switching applications, ensuring efficient performance and reliability in controlling power flow.
With a minimum breakdown voltage of 60V, this FET can handle high voltage applications, providing robust protection against voltage spikes.
The high power dissipation capability allows the FET to handle high power loads without overheating, ensuring long-term reliability in demanding applications.
With a maximum operating temperature of 175°C, this FET can withstand high temperatures, making it suitable for industrial applications where high temperatures are common.
Power Field Effect Transistors (FET) FQP47P06 attributes and parameters. Explore more Power Field Effect Transistors (FET) devices from Onsemi
Avalanche Energy Rating (EAS):
Configuration:
Minimum DS Breakdown Voltage:
Maximum Drain Current (Abs) (ID):
Maximum Drain Current (ID):
Maximum Drain-Source On Resistance:
Field Effect Transistor Technology:
JEDEC-95 Code:
JESD-30 Code:
JESD-609 Code:
No. of Elements:
No. of Terminals:
Operating Mode:
Maximum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Polarity or Channel Type:
Maximum Power Dissipation (Abs):
Maximum Pulsed Drain Current (IDM):
Qualification:
Sub-Category:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Transistor Application:
Transistor Element Material:
FQP47P06 Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
BSS123NH6327XTSA1
Infineon Technologies
Infineon BSS123NH6327XTSA1 is a N-CHANNEL FET with 100V DS breakdown voltage, 0.19A ID, and 6 ohm RDS(on). Ideal for small outline applications requiring high drain current and low on-resistance. AEC-Q101 compliant for automotive use.
1N4148
Itt Components
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .15 A;
NC7WZ17P6X
Fairchild Semiconductor
BUFFER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;
Wuxi Xuyang Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
STM32F405RGT6
STMicroelectronics
STM32F405RGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 16 external interrupts, and 196608 RAM bytes. Ideal for industrial applications, it features CAN(2), I2C(3), SPI(3) connectivity options and operates at a max clock frequency of 26 MHz. With low power mode and DMA support, it offers versatile performance in compact dimensions.
SMBJ18CA
Forward International Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Nominal Breakdown Voltage: 21.05 V; Maximum Clamping Voltage: 29.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
2N7002-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Form: GULL WING; Package Shape: RECTANGULAR;
LL4148
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM7805CT
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Min): 0 Cel; Technology: BIPOLAR;
Changzhou Galaxy Century Microelectronics
C1210C104K5RACTU
KEMET Corporation
KEMET C1210C104K5RACTU is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics and ±10% tolerance, suitable for surface mount applications in a wide temperature range from -55°C to 125°C. Its compact rectangular package makes it ideal for various electronic devices.
1N4148WS
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H/883
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
BAV99
Vishay Intertechnology
Vishay Intertechnology's BAV99 diode features a max forward voltage of 1.3V and a max output current of 0.15A, making it ideal for rectification applications. With a small outline package style and dual terminal position, this series-connected diode is designed for surface mount usage in various electronic circuits with an operating temperature range from -55°C to 150°C.
EPCS4SI8N
Intel
EPCS4SI8N by Intel is a small outline flash memory with 512Kx8 organization, operating at 3.3V. It features a max clock frequency of 40MHz and endurance of 100k write/erase cycles. Ideal for industrial applications requiring configuration memory with serial interface and low standby current consumption.
SS14
Rugao Dachang Electronic
RECTIFIER DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 40 V; Maximum Forward Voltage (VF): .55 V; No. of Elements: 1; Technology: SCHOTTKY;
C0603C104K5RACTU
KEMET C0603C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
ULN2803ADWR
Texas Instruments
ULN2803ADWR by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85°C, has a max supply voltage of 3V, and is ideal for buffer or inverter-based applications requiring sink current flow direction.
LM317T
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-XSFM-T3; Minimum Input-Output Voltage Differential: 3 V;
NE555D
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
FDD6637
Onsemi
FDD6637 by Onsemi is a P-CHANNEL Power FET with 35V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max IDM of 100A and EAS of 61mJ, with an ID of 55A and 0.0116 ohm RDS(ON). The transistor operates in ENHANCEMENT MODE at up to 150°C, making it suitable for high-power switching tasks.
BSC093N15NS5ATMA1
Infineon BSC093N15NS5ATMA1 is a N-CHANNEL FET with 150V DS breakdown voltage, 0.0093 ohm RDS(on), and 348A IDM. Ideal for switching applications due to its built-in diode, it operates in enhancement mode and has an EAS of 130mJ. The transistor's small outline package makes it suitable for surface mount designs.
FQP27P06
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 120 W; Operating Mode: ENHANCEMENT MODE; Terminal Position: SINGLE;
IRF7416TRPBF-1
International Rectifier
P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2.5 W; No. of Elements: 1; Moisture Sensitivity Level (MSL): 1;
AUIRF5210STRL
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 170 W; Maximum Pulsed Drain Current (IDM): 140 A; Transistor Element Material: SILICON;
FDS4559
FDS4559 by Onsemi is a Power FET with N-Channel and P-Channel types, ideal for switching applications. It features a 60V min DS breakdown voltage, 20A max pulsed drain current, and 0.055 ohm max drain-source resistance. With a small outline package style and matte tin terminal finish, it operates in enhancement mode up to 175°C.
FDC5612-F095
FDC5612-F095 by Fairchild Semiconductor is a N-CHANNEL Power FET with 4.3A max drain current and 1.6W power dissipation. Ideal for applications requiring high efficiency in enhancement mode operation, such as power management systems and motor control circuits.
IRF530NPBF
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 70 W; Package Shape: RECTANGULAR; Maximum Drain Current (ID): 17 A;
IXTK3N250L
Littelfuse
IXTK3N250L by Littelfuse is a N-CHANNEL FET with 2500V DS Breakdown Voltage, ideal for AMPLIFIER applications. It features 8A IDM, 417W Abs Power Dissipation, and operates in ENHANCEMENT MODE. With a max operating temperature of 150°C and -55°C min, it offers reliable performance in various environments.
DMP6023LE-13
Diodes Incorporated
DMP6023LE-13 by Diodes Inc. is a P-channel FET with 60V DS breakdown voltage and 50A IDM for switching applications. It operates in enhancement mode, has a max temp of 150°C, and features a drain-source resistance of 0.028 ohm. Ideal for automotive use due to AEC-Q101 standard compliance.
FDMS86101
FDMS86101 by Onsemi is a N-CHANNEL Power FET with 100V DS Breakdown Voltage and 200A IDM. Ideal for SWITCHING applications, it features a built-in diode, 0.008 ohm RDS(on), and 135mJ EAS rating. Operating in ENHANCEMENT MODE, this transistor has a max power dissipation of 104W in a small outline package.
IRF7425TRPBF-1
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Shape: RECTANGULAR; Terminal Finish: MATTE TIN; Package Style (Meter): SMALL OUTLINE;
BS170
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): .83 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; No. of Elements: 1;
2N7002
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Moisture Sensitivity Level (MSL): 1; Maximum Operating Temperature: 150 Cel;
SI7469DP-T1-GE3
Vishay Intertechnology's SI7469DP-T1-GE3 is a P-channel FET with 80V DS breakdown voltage, 40A IDM, and 0.025 ohm RDS(on). Ideal for power management applications due to its 83W max power dissipation, small outline package style, and -55 to +150°C operating temperature range.
SQM120P06-07L-GE3
Vishay Intertechnology's SQM120P06-07L-GE3 is a P-channel power FET with 60V DS breakdown voltage, 120A max drain current, and 0.0067 ohm on-resistance. Ideal for high-power applications in enhancement mode operation with 480A pulsed drain current capability.
STP80NF10
STP80NF10 by STMicroelectronics is a N-CHANNEL Power FET with 100V DS Breakdown Voltage, ideal for SWITCHING applications. It features 320A IDM, 350mJ EAS, and 0.015 ohm RDS(ON). With a max power dissipation of 300W and operating temperature up to 175°C, it's suitable for high-power circuits.
BSC011N03LSTATMA1
Infineon's BSC011N03LSTATMA1 is a N-CHANNEL FET with 30V DS Breakdown Voltage, ideal for SWITCHING applications. Features include 400A IDM, 0.0014 ohm RDS(on), and 190mJ EAS. Its small outline package and DUAL terminals make it suitable for high-power ENHANCEMENT MODE operations.
TN2510N8-G
Supertex
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; JESD-30 Code: R-PSSO-F3; Maximum Feedback Capacitance (Crss): 25 pF;
STH3N150-2
STH3N150-2 by STMicroelectronics is a N-channel Power FET with 1500V DS breakdown voltage, 10A IDM, and 140W max power dissipation. It's used for switching applications in enhancement mode, featuring a built-in diode and operating up to 150°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FQP47P06
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 160 W; JESD-30 Code: R-PSFM-T3; Maximum Pulsed Drain Current (IDM): 188 A;
FQP4N90C
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 140 W; Maximum Operating Temperature: 150 Cel; Maximum Pulsed Drain Current (IDM): 16 A;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 140 W; Operating Mode: ENHANCEMENT MODE; No. of Terminals: 3;
FQP4P40
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 85 W; Operating Mode: ENHANCEMENT MODE; JESD-609 Code: e3;
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 85 W; Maximum Drain Current (Abs) (ID): 3.5 A; Maximum Pulsed Drain Current (IDM): 14 A;
FQP46N15
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 210 W; Maximum Drain Current (ID): 45.6 A; Maximum Drain Current (Abs) (ID): 45.6 A;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 210 W; Package Shape: RECTANGULAR; Maximum Drain Current (ID): 45.6 A;
FQP44N10
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 146 W; Minimum DS Breakdown Voltage: 100 V; Package Shape: RECTANGULAR;
FQP45N15V2
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 220 W; Terminal Finish: Matte Tin (Sn) - annealed; Avalanche Energy Rating (EAS): 1124 mJ;
FQP4N20L
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 45 W; Maximum Drain Current (Abs) (ID): 3.6 A; No. of Terminals: 3;
FQP4N80
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 130 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Package Style (Meter): FLANGE MOUNT;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 146 W; Terminal Position: SINGLE; Maximum Drain-Source On Resistance: .039 ohm;
FQP44N08
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 127 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Maximum Pulsed Drain Current (IDM): 176 A;
FQP47P06J69Z
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Pulsed Drain Current (IDM): 188 A; No. of Terminals: 3; Minimum DS Breakdown Voltage: 60 V;
FQP4P25
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 75 W; JESD-609 Code: e3; Maximum Drain Current (ID): 4 A;
FQP44N10F
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 146 W; Maximum Operating Temperature: 175 Cel; Maximum Pulsed Drain Current (IDM): 174 A;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved