Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FQP30N06 by Onsemi is a N-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 120A IDM, 280mJ EAS, and 0.04 ohm RDS(ON), operating in ENHANCEMENT MODE up to 175°C. Perfect for high-power circuits requiring efficient switching capabilities.
Median Price
$0.950
Lifecycle Status
Suppliers In-Stock
18
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$1.036
100+ parts
$0.709
1k+ parts
$0.582
10k+ parts
-
Arrow
$1.964
$0.864
$0.685
Verical
Flip Electronics (Authorized)
DigiKey
$0.470
RS (Exports)
$1.084
$0.745
$0.702
Rochester
$0.779
$0.647
$0.577
Digiode
$0.668
Nova Conductors
$0.776
Lantek
Vyrian
Flip Electronics
Ack Elektronik San.Tic.Ltd.Sti
Diverse Electronics
ACDS - Activité Composants Distribution Service
Elcom Components
Sunrise Surplus Inc.
LittleDiode
Semicontronic
$0.471
$0.459
$0.457
Ampacity Inc.
Corohmni
$0.554
Corphita
$0.633
Argo Parts USA
Continental Prestige Electronics
$0.760
Netroflash
Modulus Dynamics
$1.098
Aztec Data Supply Inc.
$1.508
Microchip USA
$9.815
Metaverse IC Inc.
A-Z Elektronik GmbH
QUARKTWIN TECHNOLOGY LTD
RC Electronics
$0.730
$0.680
$0.670
TANS Electronics
Problanco Electronics
Perfect Parts
SupplyDigital Components
iodParts Technologies Inc.
GreenTree Electronics
Alle Elektronik GmbH
Authorized Procurement Solutions
UHIMA Technologies
Advanced Electronics
Supply Digital
Kulean Microsystems
Provides durability and protection for the internal components of the FET, ensuring reliable performance over time.
N-channel FETs typically have lower ON resistance and higher current handling capabilities compared to P-channel FETs, making them suitable for high power applications.
The built-in diode allows for efficient protection against reverse current flow, enhancing the reliability of the FET in demanding environments.
Designed specifically for switching applications, providing fast and efficient operation in turning on and off current flow.
The high breakdown voltage allows for operations in higher voltage circuits, providing versatility in various applications.
Capable of handling high current pulses, making it suitable for applications that require brief periods of high current flow.
The high avalanche energy rating indicates the FET's ability to withstand sudden high-energy spikes, ensuring reliability in transient conditions.
The high power dissipation capability allows the FET to handle significant power without overheating, ensuring stable performance under heavy loads.
Capable of operating at high temperatures, making it suitable for use in environments where heat dissipation is a concern.
Low on-resistance minimizes power loss and heat generation, improving the efficiency of the FET in conducting current.
Power Field Effect Transistors (FET) FQP30N06 attributes and parameters. Explore more Power Field Effect Transistors (FET) devices from Onsemi
Avalanche Energy Rating (EAS):
Configuration:
Minimum DS Breakdown Voltage:
Maximum Drain Current (Abs) (ID):
Maximum Drain Current (ID):
Maximum Drain-Source On Resistance:
Field Effect Transistor Technology:
JEDEC-95 Code:
JESD-30 Code:
JESD-609 Code:
No. of Elements:
No. of Terminals:
Operating Mode:
Maximum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Polarity or Channel Type:
Maximum Power Dissipation (Abs):
Maximum Pulsed Drain Current (IDM):
Qualification:
Sub-Category:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Transistor Application:
Transistor Element Material:
FQP30N06 Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
ATMEGA328P-AU
Microchip Technology
ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.
2N7002
Onsemi
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Finish: Matte Tin (Sn) - annealed; Transistor Element Material: SILICON;
RC0603JR-070RL
Yageo
Yageo's RC0603JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. Its metal glaze/thick film technology and 0.1 W power dissipation make it ideal for jumper applications in various electronic devices.
KSZ9031RNXIC
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
Lite-on Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Qualification: Not Qualified; Additional Features: LOW THRESHOLD; Minimum DS Breakdown Voltage: 60 V;
DS18B20+
Analog Devices
DS18B20+ by Analog Devices is a 12-bit temperature sensor with 3.3/5V supply, -55 to 125°C range, and ±0.50°C accuracy. It features a 1-Wire interface for digital output and is commonly used in applications requiring precise temperature monitoring in various industries.
SMBJ18CA
Thinking Electronic Industrial
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Comchip Technology
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148WS
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148W-T
Rectron
Digitron Semiconductors
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel; Terminal Form: GULL WING;
2N2222A
Transistor & Electronic
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM358AN
Texas Instruments
LM358AN by Texas Instruments is an Operational Amplifier with 2 functions. It has a Max Input Offset Voltage of 5000 uV and Nominal Common Mode Reject Ratio of 85 dB. Widely used in voltage-feedback applications due to its high Min Voltage Gain of 15000 and Unity Gain Bandwidth of 1000 kHz.
MBR0520LT3G
MBR0520LT3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, ideal for applications requiring high-speed switching and low power loss in compact electronic devices. The package style is small outline, making it suitable for surface mount designs in various electronics.
Nexperia
LM555CMX
LM555CMX by Texas Instruments is an Analog Waveform Generation IC with 8 terminals. It operates at a nominal voltage of 5V and supports power supplies ranging from 5V to 15V. This versatile IC, housed in a small outline package, is commonly used for pulse and rectangular waveform generation in commercial temperature environments.
Diodes Incorporated
LM358MX
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
IRFR9120NTRPBF
Infineon Technologies
IRFR9120NTRPBF by Infineon is a P-CHANNEL FET with 100V DS breakdown voltage and 26A IDM. Ideal for switching applications, it features a single configuration with built-in diode and operates in enhancement mode. With a max power dissipation of 40W, this MOSFET has a drain-source on resistance of 0.48 ohm and can handle up to 6.6A ID.
IRF4905PBF
IRF4905PBF by Infineon is a P-CHANNEL FET with 55V DS Breakdown Voltage and 260A IDM. Ideal for SWITCHING applications, it has a max power dissipation of 200W and operates in the temperature range of -55 to 175°C.
IRFZ44N,127
NXP Semiconductors
NXP Semiconductors' IRFZ44N,127 is a N-CHANNEL Power FET with 55V DS Breakdown Voltage. Ideal for SWITCHING applications, it features 160A IDM and 0.022 ohm RDS(on). Operating in ENHANCEMENT MODE, it has a max power dissipation of 110W and can handle up to 175°C temperature.
AO4490L
Alpha & Omega Semiconductor
AO4490L by Alpha & Omega Semiconductor is a N-CHANNEL FET with 30V DS Breakdown Voltage and 120A IDM. Ideal for SWITCHING applications, it features SINGLE configuration with BUILT-IN DIODE. Operating in ENHANCEMENT MODE, it has a max power dissipation of 2.8W and can handle up to 16A drain current.
JANTX2N6796
Unitrode
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation Ambient: 25 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Maximum Pulsed Drain Current (IDM): 32 A;
IRF530PBF
Vishay Siliconix
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Terminal Form: THROUGH-HOLE; Minimum DS Breakdown Voltage: 100 V; JEDEC-95 Code: TO-220AB;
STP11NK50ZFP
STMicroelectronics
STP11NK50ZFP by STMicroelectronics is a N-CHANNEL FET with 500V DS Breakdown Voltage, 40A IDM, and 0.52 ohm RDS(on). Ideal for SWITCHING applications due to its 30W power dissipation, 190mJ EAS rating, and ENHANCEMENT MODE operation at up to 150°C.
FDS4675
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2.4 W; Maximum Drain Current (ID): 11 A; Terminal Position: DUAL;
IPB200N25N3GATMA1
Infineon's IPB200N25N3GATMA1 is a N-CHANNEL FET with 250V DS breakdown voltage, 0.02 ohm max RDS(on), and 256A IDM. Ideal for switching applications, it operates in enhancement mode with a built-in diode. The transistor features GULL WING terminals, can handle up to 175°C, and has an EAS of 320mJ.
BS170
Topaz Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): .83 W; JESD-609 Code: e0; Maximum Operating Temperature: 150 Cel;
IRLML0060TRPBF
International Rectifier
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.25 W; Moisture Sensitivity Level (MSL): 1; Package Body Material: PLASTIC/EPOXY;
IRF640NPBF
Infineon's IRF640NPBF is a N-CHANNEL FET with 200V DS Breakdown Voltage, ideal for SWITCHING applications. It features 72A Max Pulsed Drain Current and 247mJ Avalanche Energy Rating. Operating in ENHANCEMENT MODE, it has a max power dissipation of 150W and can withstand temperatures from -55 to 175°C.
NDT452AP
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; Terminal Finish: MATTE TIN; Moisture Sensitivity Level (MSL): 1;
Advanced Microelectronic Products
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): .83 W; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Drain Current (Abs) (ID): .5 A;
IRLML6401
IRLML6401 by International Rectifier is a P-CHANNEL FET with 12V DS Breakdown Voltage and 34A IDM. Ideal for SWITCHING applications, it features a built-in diode, 33mJ EAS rating, and -55 to 150 °C operating temperature range.
STD12NF06LT4
STD12NF06LT4 by STMicroelectronics is an N-channel power FET with a 60V DS breakdown voltage and 48A max pulsed drain current. It is used for switching applications, operates in enhancement mode, and has a built-in diode. The transistor features a 0.12 ohm max drain-source resistance and can handle up to 30W of power dissipation.
DMG2301L-7
DMG2301L-7 by Diodes Inc. is a P-channel FET with 20V DS breakdown voltage and 10A IDM for switching applications. It operates in enhancement mode, has a max power dissipation of 1.5W, and features a 0.12 ohm drain-source resistance. Ideal for small outline packages with dual terminals, it can withstand temperatures from -55 to 150°C.
IRF640
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 125 W; Qualification: Not Qualified; Maximum Power Dissipation Ambient: 125 W;
IRFS4410ZTRLPBF
IRFS4410ZTRLPBF by Infineon Technologies is a N-CHANNEL Power FET with 100V DS Breakdown Voltage. It features 390A IDM, 242mJ EAS, and 0.009 ohm RDS(on). Ideal for SWITCHING applications, this ENHANCEMENT MODE transistor operates at up to 175°C and has a max power dissipation of 230W in a SMALL OUTLINE package.
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 125 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Terminal Finish: MATTE TIN;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FQP3P50
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 85 W; No. of Terminals: 3; Transistor Application: SWITCHING;
FQP3P50 by Onsemi is a P-CHANNEL Power FET with 500V DS Breakdown Voltage, ideal for SWITCHING applications. It features a Max IDM of 10.8A and EAS of 250mJ, making it suitable for high-power operations. With an operating temperature up to 150°C, this MOSFET offers reliable performance in various industrial settings.
FQP30N06L
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 79 W; Qualification: Not Qualified; JESD-609 Code: e3;
FQP30N06L by Onsemi is a N-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 128A IDM Pulsed Drain Current, 350mJ EAS Avalanche Energy Rating, and 0.045 ohm RDS(ON). The transistor operates in ENHANCEMENT MODE and has a max power dissipation of 79W at 175°C.
FQP30N06
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 79 W; JESD-30 Code: R-PSFM-T3; Operating Mode: ENHANCEMENT MODE;
FQP3N60C
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 75 W; JESD-30 Code: R-PSFM-T3; Moisture Sensitivity Level (MSL): 1;
FQP3N60C by Onsemi is a power field effect transistor (FET) with a min DS breakdown voltage of 600V. It is an N-channel transistor with a max pulsed drain current of 12A, making it suitable for switching applications. Its package style is flange mount and it operates in enhancement mode.
FQP3P20
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 52 W; JESD-30 Code: R-PSFM-T3; No. of Elements: 1;
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 52 W; Maximum Drain Current (Abs) (ID): 2.8 A; Maximum Drain-Source On Resistance: 2.7 ohm;
FQP32N20C
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 156 W; Maximum Drain Current (ID): 28 A; Package Body Material: PLASTIC/EPOXY;
FQP33N10
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 127 W; JESD-30 Code: R-PSFM-T3; Maximum Drain Current (Abs) (ID): 33 A;
FQP34N20
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 180 W; Maximum Operating Temperature: 150 Cel; Maximum Pulsed Drain Current (IDM): 124 A;
FQP3N30
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 55 W; Terminal Form: THROUGH-HOLE; Transistor Application: SWITCHING;
FQP3N50C
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 62 W; Maximum Turn On Time (ton): 90 ns; Maximum Pulsed Drain Current (IDM): 12 A;
FQP3N50C-F080
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 62 W; Minimum Operating Temperature: -55 Cel; Terminal Form: THROUGH-HOLE;
FQP3N80C
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 107 W; Terminal Position: SINGLE; Avalanche Energy Rating (EAS): 320 mJ;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 180 W; Minimum DS Breakdown Voltage: 200 V; Package Body Material: PLASTIC/EPOXY;
FQP30N06J69Z
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Operating Mode: ENHANCEMENT MODE; Transistor Element Material: SILICON; Maximum Drain-Source On Resistance: .04 ohm;
FQP33N10LJ69Z
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Drain Current (ID): 33 A; JESD-30 Code: R-PSFM-T3; Qualification: Not Qualified;
FQP30N06LJ69Z
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Avalanche Energy Rating (EAS): 350 mJ; Minimum DS Breakdown Voltage: 60 V; Operating Mode: ENHANCEMENT MODE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved