Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Onsemi's FQA13N80-F109 is a N-CHANNEL Power FET with 800V DS Breakdown Voltage. Ideal for SWITCHING applications, it offers 50.4A IDM and 1100mJ EAS ratings. With 0.75 ohm RDS(on) and 300W Pd, this MOSFET operates in ENHANCEMENT MODE up to 150°C.
Median Price
$5.370
Lifecycle Status
Suppliers In-Stock
19
In-Stock Inventory
1k+
Adafruit Industries
1+ parts
$0.548
100+ parts
$0.499
1k+ parts
$0.449
10k+ parts
-
Arrow
$3.951
$2.617
Mouser Electronics
$6.790
DigiKey
$6.870
$3.937
$2.820
$2.798
Chip1Stop
$19.200
$8.480
$5.530
Rochester
$2.800
$2.510
$2.360
Verical
EBV Elektronik
Digiode
$0.521
Nova Conductors
$2.235
Maritex
$7.202
$4.345
$3.672
Vyrian
Chip Stock
ACDS - Activité Composants Distribution Service
Bristol Electronics
Dan-Mar Components
NAC Semi
$14.290
IBS Electronics
$4.264
Cogito LLC
Ampacity Inc.
$0.466
Corphita
$0.493
Advanced Electronics
Corohmni
Microchip USA
$28.080
Metaverse IC Inc.
RC Electronics
$2.230
$2.040
$1.980
GreenTree Electronics
A-Z Elektronik GmbH
Kulean Microsystems
SupplyDigital Components
TANS Electronics
Netroflash
$2.190
$2.123
$2.079
QUARKTWIN TECHNOLOGY LTD
Supply Digital
Futuretech Components
Alle Elektronik GmbH
Kepictronics
Problanco Electronics
Perfect Parts
UHIMA Technologies
This material provides durability and protection for the internal components of the transistor, ensuring a longer lifespan.
Designed specifically for switching applications, making it efficient and reliable for controlling power flow.
With a high DS breakdown voltage, this transistor can handle high voltage applications with ease.
The high avalanche energy rating ensures that the transistor can withstand sudden voltage spikes or surges.
With a high power dissipation rating, this transistor can handle high power loads without overheating.
Can operate efficiently at high temperatures, making it suitable for demanding applications.
Power Field Effect Transistors (FET) FQA13N80-F109 attributes and parameters. Explore more Power Field Effect Transistors (FET) devices from Onsemi
Avalanche Energy Rating (EAS):
Configuration:
Minimum DS Breakdown Voltage:
Maximum Drain Current (Abs) (ID):
Maximum Drain Current (ID):
Maximum Drain-Source On Resistance:
Field Effect Transistor Technology:
JESD-30 Code:
No. of Elements:
No. of Terminals:
Operating Mode:
Maximum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Polarity or Channel Type:
Maximum Power Dissipation (Abs):
Maximum Pulsed Drain Current (IDM):
Qualification:
Sub-Category:
Surface Mount:
Terminal Form:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Transistor Application:
Transistor Element Material:
FQA13N80-F109 Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
PCN Design/Specification - Dimension/Color Change 24/Feb/2021 Logo 17/Aug/2017
PCN Assembly/Origin - Assembly/Test Transfer 18/Sep/2023
PCN Packaging - Mult Devices 24/Oct/2017 Packing quantity increase 28/Dec/2020
PCN Part Number - Mult Device Part Number Chg 30/May/2017
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
LL4148
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148WT
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
BAV99
Micro Commercial Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
General Semiconductor
Micronas Semiconductor Holding Ag
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .2 A; Maximum Forward Voltage (VF): 1.2 V;
2N7002
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Minimum DS Breakdown Voltage: 60 V; Package Shape: RECTANGULAR;
SS14
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Toshiba
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148WS
Fairchild Semiconductor
C1210C104K5RACTU
KEMET Corporation
KEMET C1210C104K5RACTU is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics and ±10% tolerance, suitable for surface mount applications in a wide temperature range from -55°C to 125°C. Its compact rectangular package makes it ideal for various electronic devices.
LM358M
Texas Instruments
LM358M by Texas Instruments is an Operational Amplifier with 2 functions, featuring a max input offset voltage of 9000 uV and a nominal voltage of 5 V. It is commonly used in applications requiring high common mode rejection ratio and low bias current, such as sensor interfaces and signal conditioning circuits.
Plessey Semiconductors Discrete Components Div
STM32H753IIK6
STMicroelectronics
STM32H753IIK6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and peripherals like CAN, ETHERNET, and USB. Ideal for industrial applications requiring high-speed processing and extensive connectivity options.
International Components
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Maximum Reverse Recovery Time: .004 us;
EU2B-YS3103F
Idec
ROTARY SWITCH;
LIS2DH12TR
LIS2DH12TR by STMicroelectronics is a 3-axis accelerometer with digital voltage output. It operates b/w -40 to 85°C, with supply voltage range of 1.71-3.6V. Ideal for applications requiring precise motion sensing in compact spaces like wearables and IoT devices.
M24308/2-1F
Air Electro
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; MIL Conformity: YES; Additional Features: STANDARD: MIL-DTL-24308;
Changzhou Galaxy Century Microelectronics
BSS138K-13
Diodes Incorporated
BSS138K-13 by Diodes Inc. is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, operating in enhancement mode. With 3 terminals and 0.31A max drain current, it offers high performance in small outline package style.
IRFL9014TRPBF
International Rectifier
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3.1 W; Package Shape: RECTANGULAR; Operating Mode: ENHANCEMENT MODE;
IRFR5410TRPBF
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 66 W; Avalanche Energy Rating (EAS): 194 mJ; Additional Features: HIGH RELIABILITY, AVALANCHE RATED, ULTRA-LOW RESISTANCE;
IRFP260NPBF
Infineon Technologies
IRFP260NPBF by Infineon is a N-CHANNEL Power FET with 200V DS Breakdown Voltage and 50A Drain Current. Ideal for SWITCHING applications, it features a 300W Power Dissipation, -55 to 175 °C Operating Temp, and 0.04 ohm On Resistance.
IRLML2030TRPBF
IRLML2030TRPBF by Infineon is a N-CHANNEL Power FET with 30V DS Breakdown Voltage and 11A IDM. Ideal for SWITCHING applications, it features a SINGLE configuration with BUILT-IN DIODE in PLASTIC/EPOXY package. Operating from -55 to 150 °C, it has 0.1 ohm Drain-Source On Resistance and 12pF Feedback Capacitance.
IPA80R650CEXKSA2
Infineon's IPA80R650CEXKSA2 is a N-CHANNEL FET with 800V DS breakdown voltage, ideal for SWITCHING applications. Features include 24A IDM, 340mJ EAS, and 0.65 ohm RDS(on). Package style is FLANGE MOUNT with THROUGH-HOLE terminals.
IRF9530
Intersil
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 88 W; Avalanche Energy Rating (EAS): 500 mJ; No. of Elements: 1;
PSMN5R5-60YS,115
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-609 Code: e3; Maximum Time At Peak Reflow Temperature (s): 30; No. of Elements: 1;
IRFP460
Harris Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 280 W; Qualification: Not Qualified; Maximum Turn Off Time (toff): 228 ns;
IRF530PBF
Vishay Siliconix
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Terminal Form: THROUGH-HOLE; Minimum DS Breakdown Voltage: 100 V; JEDEC-95 Code: TO-220AB;
IRLML6401GTRPBF
IRLML6401GTRPBF by Infineon is a P-CHANNEL FET with 12V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max IDM of 34A and EAS of 33mJ, suitable for high-power operations. With a small outline package style and GULL WING terminals, it operates in temperatures ranging from -55 to 150 °C.
SQJ457EP-T1_GE3
Vishay Intertechnology
Vishay Intertechnology's SQJ457EP-T1_GE3 is a P-CHANNEL FET with 60V DS Breakdown Voltage, 100A IDM, and 0.025 ohm RDS(ON). Ideal for power management applications in automotive electronics due to AEC-Q101 standard compliance.
IRF640
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 125 W; Maximum Turn Off Time (toff): 122 ns; Transistor Element Material: SILICON;
Comset Semiconductors
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; JEDEC-95 Code: TO-220AB; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Transistor Element Material: SILICON;
IRF9640STRLPBF
P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Elements: 1; Maximum Power Dissipation Ambient: 125 W; Minimum DS Breakdown Voltage: 200 V;
IRFL9014PBF
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PSSO-G3; No. of Terminals: 3; No. of Elements: 1;
IRFH5010TRPBF
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 250 W; Package Style (Meter): SMALL OUTLINE; Minimum DS Breakdown Voltage: 100 V;
BSC117N08NS5ATMA1
Infineon's BSC117N08NS5ATMA1 is a N-CHANNEL FET with 80V DS Breakdown Voltage, ideal for SWITCHING applications. Features include 196A IDM, 14mJ EAS, and 0.0117 ohm RDS(on). With ENHANCEMENT MODE operation and DUAL terminal position, it offers high performance in a SMALL OUTLINE package.
BSZ040N06LS5ATMA1
Infineon's BSZ040N06LS5ATMA1 is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 160A IDM, 117mJ EAS, and 0.004 ohm RDS(on). The transistor operates in ENHANCEMENT MODE and has a -55°C Min Operating Temp.
SCT3080KLGC11
ROHM
ROHM's SCT3080KLGC11 is a N-CHANNEL FET with 1200V DS breakdown voltage and 77A IDM. Ideal for switching applications, it features a single configuration with built-in diode and 0.104 ohm max drain-source resistance.
NDT3055
Onsemi
NDT3055 by Onsemi is a Power FET with 60V DS breakdown voltage, 25A IDM, and 0.1 ohm RDS(on). Ideal for switching applications, it features N-CHANNEL polarity, SINGLE configuration with built-in diode. Operating in enhancement mode at up to 150°C, this MOSFET has GULL WING terminals and is surface mountable.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FQA11N90C_F109
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 300 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Operating Mode: ENHANCEMENT MODE;
FQA11N90C-F109
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 300 W; Package Shape: RECTANGULAR; Maximum Drain-Source On Resistance: 1.4 ohm;
FQA160N08
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 375 W; Terminal Form: THROUGH-HOLE; Avalanche Energy Rating (EAS): 1600 mJ;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 375 W; Transistor Application: SWITCHING; Avalanche Energy Rating (EAS): 1600 mJ;
FQA19N60
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 300 W; Package Shape: RECTANGULAR; Avalanche Energy Rating (EAS): 1150 mJ;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 300 W; JESD-609 Code: e3; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
FQA11N90_F109
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 300 W; Maximum Drain Current (Abs) (ID): 11.4 A; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
FQA11N90-F109
FQA11N90-F109 by Onsemi is a N-CHANNEL Power FET with 900V DS Breakdown Voltage and 45.6A Pulsed Drain Current, ideal for SWITCHING applications. Featuring a built-in diode, it has 0.96 ohm Drain-Source On Resistance and operates in ENHANCEMENT MODE up to 150°C.
FQA19N20
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 190 W; Operating Mode: ENHANCEMENT MODE; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
FQA10N80C-F109
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 240 W; Package Style (Meter): FLANGE MOUNT; No. of Terminals: 3;
FQA13N50CF
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 218 W; Maximum Drain Current (Abs) (ID): 15 A; Maximum Drain Current (ID): 15 A;
FQA13N50C-F109
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 218 W; Operating Mode: ENHANCEMENT MODE; Maximum Drain-Source On Resistance: .48 ohm;
FQA140N10
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 375 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Maximum Operating Temperature: 175 Cel;
FQA170N06
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 375 W; Terminal Position: SINGLE; No. of Terminals: 3;
FQA13N50C_F109
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 218 W; Maximum Pulsed Drain Current (IDM): 54 A; Maximum Drain Current (Abs) (ID): 13.5 A;
FQA13N50
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 190 W; Maximum Drain Current (ID): 13.4 A; Maximum Pulsed Drain Current (IDM): 53.6 A;
FQA13N80
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 300 W; Maximum Operating Temperature: 150 Cel; Qualification: Not Qualified;
FQA13N50CF_F109
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 218 W; Package Shape: RECTANGULAR; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 218 W; Transistor Element Material: SILICON; Maximum Pulsed Drain Current (IDM): 60 A;
FQA13N80_F109
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 300 W; Qualification: Not Qualified; Minimum DS Breakdown Voltage: 800 V;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved