Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FOD3184V by Onsemi is a single optocoupler with a max forward current of 0.016A and max isolation voltage of 5000V. It operates b/w -40 to 100°C, making it suitable for logic IC output applications requiring high voltage protection. With through-hole mounting and matte tin finish, it offers reliable performance in various electronic circuits.
Median Price
$1.459
Lifecycle Status
Suppliers In-Stock
12
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$3.470
100+ parts
$1.990
1k+ parts
$1.460
10k+ parts
$1.420
DigiKey
-
$0.790
Flip Electronics (Authorized)
Rochester
$1.380
$1.230
$1.160
Verical
$1.538
$1.450
Digiode
$1.378
Nova Conductors
$1.425
Chip Stock
Flip Electronics
Vyrian
ComSIT Distribution GmbH
ComSIT USA
Aztec Data Supply Inc.
$0.465
Semicontronic
$1.199
$1.193
Ampacity Inc.
Corphita
$1.305
Corohmni
$1.396
Argo Parts USA
Continental Prestige Electronics
$1.392
Netroflash
Component Stockers USA
$1.480
$1.390
$1.360
QUARKTWIN TECHNOLOGY LTD
Perfect Parts
SupplyDigital Components
Kulean Microsystems
TANS Electronics
Problanco Electronics
UHIMA Technologies
Supply Digital
Metaverse IC Inc.
This optocoupler circuit output has a single configuration, making it easy to integrate into various electronic devices.
With a high maximum forward current capability, this product can handle power well and is suitable for applications requiring a reliable output.
Featuring a logic IC output optocoupler type, this device is ideal for controlling logic signals and providing electrical isolation.
The low minimum supply voltage requirement of 15V ensures compatibility with a wide range of power sources.
Operating efficiently at temperatures up to 100°C, this product is suitable for demanding environments.
Able to operate in temperatures as low as -40°C, this optocoupler is reliable even in extreme conditions.
The matte tin terminal finish provides a durable surface for soldering connections, ensuring long-term stability.
With a maximum power dissipation of 0.25W, this device can handle heat effectively and maintain performance.
Featuring a high maximum isolation voltage of 5000V, this optocoupler provides a secure barrier between input and output circuits.
The through-hole mounting feature offers ease of installation and secure placement on circuit boards.
With a low maximum forward voltage of 1.8V, this product offers efficient energy conversion and minimizes power loss.
Optocoupler Circuit Outputs FOD3184V attributes and parameters. Explore more Optocoupler Circuit Outputs devices from Onsemi
Additional Features:
Configuration:
Maximum Forward Current:
Maximum Forward Voltage:
Maximum Isolation Voltage:
JESD-609 Code:
Mounting Feature:
No. of Elements:
No. of Functions:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Maximum Power Dissipation:
Sub-Category:
Minimum Supply Voltage:
Terminal Finish:
FOD3184V Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.80.00
SB
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
ABS25-32.768KHZ-T
Abracon
Abracon's ABS25-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency, such as IoT devices and precision timing systems in industrial settings.
LL4148
Itt Components
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .005 us; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Non Repetitive Peak Forward Current: 1 A;
L78L05ABZ-AP
STMicroelectronics
L78L05ABZ-AP by STMicroelectronics is a BIPOLAR fixed positive single output standard regulator with an operating temperature range of -40 to 125°C. It has a nominal output voltage of 5V, max load regulation of 0.06%, and can handle a max output current of 0.07A. Ideal for applications requiring stable voltage regulation in various electronic devices.
LM358N
Harris Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
BAV99
NXP Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Transys Electronics
DS18B20
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Shape or Style: ROUND; Housing: PLASTIC; Output Interface Type: 1-WIRE INTERFACE;
M24308/2-1F
Amphenol
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; Body Length: 1.228 inch; No. of Rows Loaded: 2;
BSS138
Diodes Incorporated
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Minimum DS Breakdown Voltage: 50 V; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
Freescale Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LM555CM
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM7805CT/NOPB
Texas Instruments
LM7805CT/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a package style of flange mount, and offers low line/load regulation making it ideal for various electronic applications requiring stable power supply.
1N4148
Gulf Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N2222A
Microsemi
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 30; No. of Elements: 1;
M39029/58-360
TE Connectivity
TE Connectivity's M39029/58-360 is a CRIMP terminal backshell for 22-28 AWG wires, rated at 5A. Ideal for male contacts in Mil-Spec applications, it offers a cross-section area of 0.34 mm2 and ensures secure connections in demanding environments.
Diotec Electronics
Rfe International
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Forward Voltage (VF): 1 V; Config: SINGLE;
Gec Plessey Semiconductors
Onsemi
HCPL-0701-500E
Agilent Technologies
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin (Sn); Maximum Forward Current: .012 A; No. of Elements: 1; Minimum Current Transfer Ratio: 400 %;
HCPL0611R2
The Onsemi HCPL0611R2 is a single optocoupler with a max forward current of 0.05A and an isolation voltage of 3750V, ideal for logic IC output applications. With a nominal data rate of 10MBps and operating temperature range from -40 to 85°C, it offers fast response time and reliable performance in surface mount configurations.
HCPL2531S
HCPL2531S by Onsemi is a logic IC output optocoupler with 2 separate channels. It has a max forward current of 0.025A and an isolation voltage of 2500V, making it suitable for high-speed data transmission applications. With a response time of 450ns and a data rate of 1MBps, this rectangular-shaped optocoupler is ideal for surface mount configurations in various electronic circuits.
6N139
Infineon Technologies
LOGIC IC OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Lead (Sn/Pb); Configuration: SINGLE; Maximum On State Current: .06 A; No. of Functions: 1; No. of Elements: 1;
HCPL-2601
Broadcom
Broadcom's HCPL-2601 is a single optocoupler with a max forward current of 0.02A and isolation voltage of 3750V. Ideal for logic IC output applications, it operates b/w -40 to 85°C with a nominal response time of 20ns.
6N135
Lite-on Technology
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; No. of Functions: 1; Maximum On State Current: .008 A; Configuration: SINGLE; Minimum Operating Temperature: 0 Cel;
HCPL2530SD
HCPL2530SD by Onsemi is a 2-channel logic IC output optocoupler with separate configuration. It has a max forward current of 0.025A and an isolation voltage of 2500V, making it ideal for high-speed data transmission applications. With a response time of 500ns and surface mounting feature, this optocoupler is suitable for various electronic circuits requiring fast signal transfer.
ACSL-7210-00RE
Broadcom's ACSL-7210-00RE is a single optocoupler with a max forward current of 0.00001 A and isolation voltage of 3750 V. It operates b/w -40 to 105 °C, has a response time of 27 ns, and supports data rates up to 25 MBps. Ideal for logic IC output applications requiring high-speed signal transmission in various electronic circuits.
HCPL0630
Fairchild Semiconductor's HCPL0630 is a 2-channel optocoupler with separate configuration. It has a max forward current of 0.1A and operates at temperatures ranging from -40 to 85°C. Ideal for logic IC output applications, it offers an isolation voltage of 3750V and data rate of 10MBps.
FOD8012AR2
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; Nominal Data Rate: 1.875 MBps; Packing Method: TR; Configuration: SEPARATE, 2 CHANNELS;
HCPL0501R2
LOGIC IC OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Configuration: SINGLE; Packing Method: TR; No. of Functions: 1; No. of Elements: 1;
PC457L0NIP0F
Sharp Corporation
Sharp Corporation's PC457L0NIP0F is a single optocoupler with max forward current of 0.016A and isolation voltage of 3750V. Ideal for logic IC output applications, it operates b/w 0-70°C with a data rate of 1MBps and max on-state current of 0.008A.
6N137SDVM
6N137SDVM by Onsemi is a single optocoupler with max forward current of 0.05A and isolation voltage of 5000V. It operates b/w -40 to 100°C, ideal for logic IC output applications at data rates up to 10MBps. With a response time of 40ns, it's suitable for surface mounting in various electronic circuits.
6N137VM
The Onsemi 6N137VM is a single optocoupler with a max forward current of 0.05 A and an isolation voltage of 5000 V. With a nominal data rate of 10 MBps, it is ideal for logic IC output applications. Operating b/w -40 to 100 °C, this rectangular-shaped optocoupler has a response time of 40 ns and can be mounted through hole.
5962-89785022A
Micropac Industries
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: TIN LEAD; Maximum Forward Current: .01 A; Maximum Forward Voltage: 1.8 V; Maximum Power Dissipation: .1 W;
6N139SDVM
LOGIC IC OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Maximum Isolation Voltage: 5000 V; Maximum On State Current: .06 A; Maximum Operating Temperature: 100 Cel; JESD-609 Code: e3;
HCPL-0731-500
Broadcom's HCPL-0731-500 is a 2-channel optocoupler with separate configuration. It has a max forward current of 0.02A and min supply voltage of 4.5V, ideal for logic IC output applications. With a high isolation voltage of 3750V and surface mounting feature, it ensures reliable performance in various electronic circuits.
HCPL-063L-560E
HCPL-063L-560E by Broadcom is a logic IC output optocoupler with separate configuration and 2 channels. It has a max forward current of 0.015 A and can operate at temperatures up to 85°C. This optocoupler is commonly used in applications requiring high isolation voltage and fast response time.
HCPL-0201
LOGIC IC OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Lead (Sn/Pb); Minimum Supply Voltage: 4.5 V; No. of Functions: 1; No. of Elements: 1; Maximum On State Current: .025 A;
6N137
Marktech Optoelectronics
Optocoupler - IC Outputs; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Current: .02 A; Maximum Power Dissipation: .085 W; Maximum Operating Temperature: 70 Cel;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FOD3182V
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Matte Tin (Sn); No. of Functions: 1; Maximum Forward Current: .016 A; Maximum Forward Voltage: 1.8 V;
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: MATTE TIN; No. of Elements: 1; Maximum Power Dissipation: .295 W; Maximum Operating Temperature: 100 Cel;
FOD3184SD
FOD3184SD by Onsemi is a single optocoupler with a max forward current of 0.016A and isolation voltage of 5000V. It operates b/w -40 to 100°C, making it suitable for logic IC output applications. With a surface mount feature and matte tin finish, it offers reliable performance in various electronic circuits.
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); JESD-609 Code: e3; Maximum Forward Voltage: 1.8 V; Minimum Supply Voltage: 15 V;
FOD3182
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: MATTE TIN; Minimum Supply Voltage: 10 V; Additional Features: UL RECOGNIZED; Maximum Operating Temperature: 100 Cel;
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Matte Tin (Sn); Additional Features: UL RECOGNIZED; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 100 Cel;
FOD3182SV
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); No. of Elements: 1; Minimum Supply Voltage: 10 V; Configuration: SINGLE;
FOD3182SV by Onsemi is a single optocoupler circuit output with a max forward current of 0.016 A. It is commonly used in logic IC output applications, offering a min supply voltage of 10 V and an operating temperature range from -40 to 100 °C.
FOD3182S
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; Minimum Supply Voltage: 10 V; Configuration: SINGLE; JESD-609 Code: e3;
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Minimum Supply Voltage: 10 V; Maximum Forward Voltage: 1.8 V; Additional Features: UL RECOGNIZED;
FOD3182SDV
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Forward Current: .016 A; Configuration: SINGLE; JESD-609 Code: e3;
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; Maximum Isolation Voltage: 5000 V; JESD-609 Code: e3; Maximum Forward Voltage: 1.8 V;
FOD3184S
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; Minimum Supply Voltage: 15 V; Minimum Operating Temperature: -40 Cel; Maximum Isolation Voltage: 5000 V;
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Isolation Voltage: 5000 V; Maximum Power Dissipation: .25 W; No. of Functions: 1;
FOD3184V
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Forward Voltage: 1.8 V; Maximum Isolation Voltage: 5000 V; Maximum Forward Current: .016 A;
FOD3182TSR2V
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Power Dissipation: .295 W; Maximum Isolation Voltage: 5000 V; Configuration: SINGLE;
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; Maximum Power Dissipation: .295 W; Maximum Isolation Voltage: 5000 V; No. of Elements: 1;
FOD3182TSV
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; JESD-609 Code: e3; Additional Features: UL RECOGNIZED, VDE APPROVED; Maximum Isolation Voltage: 5000 V;
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); No. of Elements: 1; Maximum Power Dissipation: .295 W; Maximum Isolation Voltage: 5000 V;
FOD3184TSV
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Minimum Supply Voltage: 15 V; Maximum Forward Voltage: 1.8 V; Additional Features: UL RECOGNIZED, VDE APPROVED;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved