Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FOD3182SV by Onsemi is a single optocoupler circuit output with a max forward current of 0.016 A. It is commonly used in logic IC output applications, offering a min supply voltage of 10 V and an operating temperature range from -40 to 100 °C.
Median Price
$2.236
Lifecycle Status
Suppliers In-Stock
11
In-Stock Inventory
1k+
Arrow
1+ parts
$1.361
100+ parts
$1.121
1k+ parts
$1.019
10k+ parts
$0.942
Rochester
$1.470
$1.440
$1.410
-
Chip1Stop
$3.003
$1.749
Mouser Electronics
$3.090
$1.890
$1.570
$1.400
DigiKey
$3.300
$1.885
$1.578
$1.445
Verical
Digiode
$1.396
Nova Conductors
$1.530
Chip Stock
Flip Electronics
Vyrian
Aztec Data Supply Inc.
$0.197
Semicontronic
$1.250
$1.219
$1.212
Corphita
$1.323
Corohmni
Continental Prestige Electronics
$1.500
Argo Parts USA
Advanced Electronics
$1.561
Ampacity Inc.
$2.720
QUARKTWIN TECHNOLOGY LTD
SupplyDigital Components
TANS Electronics
Problanco Electronics
Kepictronics
Kulean Microsystems
Supply Digital
Perfect Parts
Netroflash
$1.454
$1.423
UHIMA Technologies
Single configuration makes it easier to integrate into circuits and simplifies the design process.
Can handle a maximum forward current of 0.016 A, ensuring reliable performance in various applications.
Logic IC output optocoupler type allows for seamless integration with logic circuitry, making it suitable for digital applications.
Requires a minimum supply voltage of 10 V, providing compatibility with standard voltage levels in most electronic systems.
With a maximum operating temperature of 100 °C, it can withstand high-temperature environments without compromising performance.
Capable of operating at temperatures as low as -40 °C, making it suitable for a wide range of operating conditions.
Matte tin terminal finish offers good solderability and resistance to oxidation, ensuring reliable electrical connections.
Can dissipate up to 0.295 W of power, preventing overheating and prolonging the lifespan of the optocoupler.
Provides a maximum isolation voltage of 5000 V, ensuring safe operation and protection against electrical hazards.
Surface mounting feature allows for easy and secure installation on PCBs, saving space and improving overall circuit performance.
With a maximum forward voltage of 1.8 V, it offers efficient power conversion and minimizes power losses in the circuit.
Optocoupler Circuit Outputs FOD3182SV attributes and parameters. Explore more Optocoupler Circuit Outputs devices from Onsemi
Additional Features:
Configuration:
Maximum Forward Current:
Maximum Forward Voltage:
Maximum Isolation Voltage:
JESD-609 Code:
Mounting Feature:
No. of Elements:
No. of Functions:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Maximum Power Dissipation:
Sub-Category:
Minimum Supply Voltage:
Terminal Finish:
FOD3182SV Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.80.00
SB
PCN Design/Specification - Logo 17/Aug/2017
PCN Assembly/Origin - Alternate LED manufacturing site/LED die source 15/Jul/2021
PCN Packaging - Mult Devices 24/Oct/2017
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
M39029/56351
Esterline Technologies
CONNECTOR ACCESSORY; IEC Conformity: NO; Contact Gender: FEMALE; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT; Tool Settings: M22520/2-10;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
DS18B20Z+T&R
Analog Devices
DS18B20Z+T&R by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. The sensor comes in a plastic package suitable for surface mount applications, with a max supply voltage of 5.5V and min of 3V.
OPA2277UA
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
1N4148WS
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Rugao Dachang Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM7805CT
Fairchild Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
C1206C104M5RACTU
KEMET Corporation
KEMET C1206C104M5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±20% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
LL4148-GS08
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Vishay Intertechnology
ATMEGA328P-AU
Atmel
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 32; Package Code: TQFP; Package Shape: SQUARE;
STM32F405RGT6
STMicroelectronics
STM32F405RGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 16 external interrupts, and 196608 RAM bytes. Ideal for industrial applications, it features CAN(2), I2C(3), SPI(3) connectivity options and operates at a max clock frequency of 26 MHz. With low power mode and DMA support, it offers versatile performance in compact dimensions.
BAV99
Rfe International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
TM4C1294NCPDTI3
Texas Instruments
TM4C1294NCPDTI3 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU family. It features 8KB data EEPROM, 20-Ch 12-Bit ADC channels, and 32 DMA channels. Ideal for industrial applications requiring high-speed processing, it offers connectivity options like CAN, Ethernet, I2C, SPI, UART, and USB.
LM107H/883C
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Package Equivalence Code: CAN8,.2;
LM317T
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; No. of Functions: 1; Package Body Material: PLASTIC/EPOXY; Surface Mount: NO;
SS14
General Instrument
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Yangzhou Yangjie Electronics
M24308/2-1F
Cristek Interconnects
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Rows Loaded: 2; Shell Size: 1/E; Filter Feature: NO;
Formosa Microsemi
HCPL2531V
Onsemi
HCPL2531V by Onsemi is a logic IC output optocoupler with 2 separate channels. It has a max forward current of 0.025 A and an isolation voltage of 2500 V. Ideal for applications requiring high-speed data transmission and electrical noise isolation in industrial automation systems.
HCPL-0701#500
Vicor
Vicor's HCPL-0701#500 optocoupler features a single configuration with max. forward current of 0.02A and max. isolation voltage of 2500V. Ideal for logic IC output applications, it operates b/w -40°C to +70°C, making it suitable for various industrial environments.
6N137S-TA1
Lite-on Technology
6N137S-TA1 by Lite-on Technology is a single optocoupler with max. forward current of 0.02 A, min. supply voltage of 2.7 V, and max. operating temp of 85°C. Ideal for logic IC output applications due to its fast response time (21 ns), high isolation voltage (5000 V), and data rate of 15 MBps in surface mount configuration.
HCPL-0600#500
Broadcom
Broadcom's HCPL-0600#500 optocoupler features a max forward current of 0.02A, isolation voltage of 2500V, and data rate of 10MBps. Ideal for logic IC output applications, it operates b/w -40°C to 85°C with a min supply voltage of 4.5V.
6N138
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Forward Voltage: 1.7 V; Maximum Power Dissipation: .1 W; Maximum Operating Temperature: 100 Cel;
HCPL2530
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Matte Tin (Sn) - annealed; Maximum Isolation Voltage: 2500 V; Maximum Response Time: .0000015 s; Maximum Operating Temperature: 85 Cel;
6N138SM
6N138SM by Onsemi is a single optocoupler with max forward current of 0.02A, min transfer ratio of 300%, and max isolation voltage of 5000V. Ideal for logic IC output applications due to its surface mounting feature and operating temperature range from -40°C to 100°C.
6N136STA-V
6N136STA-V by Lite-on Technology is a single optocoupler with max forward current of 0.025A and isolation voltage of 2500V. Ideal for logic IC output applications, it operates b/w -55°C to 100°C with max on state current of 0.008A.
HCPL-2202-000E
Broadcom's HCPL-2202-000E is a single optocoupler with 3750V isolation voltage, 30ns response time, and 5MBps data rate. Ideal for logic IC output applications, it operates b/w -40 to 85°C with a max forward current of 0.01A.
TLP5214
Toshiba
Toshiba's TLP5214 is a linear IC output optocoupler with a min supply voltage of 15V and max forward current of 0.25A. With a response time of 32ns, it is ideal for applications requiring high-speed signal transmission in complex circuit configurations. Operating b/w -40°C to 110°C, it offers reliable performance in various electronic systems.
HCPL-2731-500E
Agilent Technologies
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin (Sn); Minimum Supply Voltage: 4.5 V; No. of Elements: 2; No. of Functions: 2;
FOD8160R2
FOD8160R2 by Onsemi is a LOGIC IC OUTPUT OPTOCOUPLER with a max forward current of 0.025 A and isolation voltage of 5000 V. It operates b/w -40 to 100 °C, has a response time of 90 ns, and can handle up to 5.5 V supply voltage. Ideal for surface mount applications in optocoupler circuit outputs.
HCPL-0211-500E
Optocoupler - IC Outputs; Mounting Feature: SURFACE MOUNT; No. of Elements: 1; Maximum Operating Temperature: 85 Cel; Nominal Supply Voltage: 20 V; Maximum Isolation Voltage: 3750 V;
6N136
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; No. of Elements: 1; Minimum Operating Temperature: -55 Cel; Maximum Response Time: .0000008 s; Maximum On State Current: .008 A;
HCNW2211-000E
Optocoupler - IC Outputs; Mounting Feature: THROUGH HOLE MOUNT; Maximum Forward Current: .005 A; Maximum Operating Temperature: 85 Cel; Nominal Supply Voltage: 20 V; No. of Elements: 1;
TLP2766A(LF4,E
Toshiba's TLP2766A(LF4,E is a single optocoupler with max. forward current of 0.025 A, ideal for logic IC output applications. It operates b/w -40 to 125°C, offers 5000 V isolation voltage, and has a response time of 5 ns. Suitable for surface mounting method and supports data rates up to 20 MBps.
TLP700(F)
Toshiba's TLP700(F) is a single optocoupler with max. forward current of 0.01A, isolation voltage of 5000V, and response time of 500ns. Ideal for logic IC output applications, it operates b/w -40°C to 100°C and requires a min. supply voltage of 15V up to a max. of 30V.
HCPL-2200-500E
Broadcom's HCPL-2200-500E is a single optocoupler with 3750V isolation voltage, 2.5 MBps data rate, and 0.025A max on-state current. Ideal for logic IC output applications, it operates b/w 0 to 85°C with a min supply voltage of 4.5V.
6N139-000E
6N139-000E by Broadcom is a SINGLE optocoupler with 0.02A forward current, 400% min. transfer ratio, and 3750V isolation voltage. Ideal for logic IC output applications due to its fast response time of 0.000025s and through-hole mounting feature.
ACSL-6400-00TE
Broadcom's ACSL-6400-00TE is a 4-channel logic IC output optocoupler with separate configuration. It operates at -40 to 100 °C and offers 2500V isolation voltage. Ideal for applications requiring high-speed data transmission up to 15 MBps in surface mount setups.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FOD3182V
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Matte Tin (Sn); No. of Functions: 1; Maximum Forward Current: .016 A; Maximum Forward Voltage: 1.8 V;
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: MATTE TIN; No. of Elements: 1; Maximum Power Dissipation: .295 W; Maximum Operating Temperature: 100 Cel;
FOD3184SD
FOD3184SD by Onsemi is a single optocoupler with a max forward current of 0.016A and isolation voltage of 5000V. It operates b/w -40 to 100°C, making it suitable for logic IC output applications. With a surface mount feature and matte tin finish, it offers reliable performance in various electronic circuits.
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); JESD-609 Code: e3; Maximum Forward Voltage: 1.8 V; Minimum Supply Voltage: 15 V;
FOD3182
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: MATTE TIN; Minimum Supply Voltage: 10 V; Additional Features: UL RECOGNIZED; Maximum Operating Temperature: 100 Cel;
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Matte Tin (Sn); Additional Features: UL RECOGNIZED; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 100 Cel;
FOD3182SV
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); No. of Elements: 1; Minimum Supply Voltage: 10 V; Configuration: SINGLE;
FOD3182S
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; Minimum Supply Voltage: 10 V; Configuration: SINGLE; JESD-609 Code: e3;
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Minimum Supply Voltage: 10 V; Maximum Forward Voltage: 1.8 V; Additional Features: UL RECOGNIZED;
FOD3182SDV
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Forward Current: .016 A; Configuration: SINGLE; JESD-609 Code: e3;
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; Maximum Isolation Voltage: 5000 V; JESD-609 Code: e3; Maximum Forward Voltage: 1.8 V;
FOD3184S
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; Minimum Supply Voltage: 15 V; Minimum Operating Temperature: -40 Cel; Maximum Isolation Voltage: 5000 V;
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Isolation Voltage: 5000 V; Maximum Power Dissipation: .25 W; No. of Functions: 1;
FOD3184V
FOD3184V by Onsemi is a single optocoupler with a max forward current of 0.016A and max isolation voltage of 5000V. It operates b/w -40 to 100°C, making it suitable for logic IC output applications requiring high voltage protection. With through-hole mounting and matte tin finish, it offers reliable performance in various electronic circuits.
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Forward Voltage: 1.8 V; Maximum Isolation Voltage: 5000 V; Maximum Forward Current: .016 A;
FOD3182TSR2V
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Power Dissipation: .295 W; Maximum Isolation Voltage: 5000 V; Configuration: SINGLE;
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; Maximum Power Dissipation: .295 W; Maximum Isolation Voltage: 5000 V; No. of Elements: 1;
FOD3182TSV
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; JESD-609 Code: e3; Additional Features: UL RECOGNIZED, VDE APPROVED; Maximum Isolation Voltage: 5000 V;
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); No. of Elements: 1; Maximum Power Dissipation: .295 W; Maximum Isolation Voltage: 5000 V;
FOD3184TSV
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Minimum Supply Voltage: 15 V; Maximum Forward Voltage: 1.8 V; Additional Features: UL RECOGNIZED, VDE APPROVED;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved