Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Onsemi FOD3184S is a single optocoupler with a max forward current of 0.016A and isolation voltage of 5000V, ideal for logic IC output applications. It operates b/w -40 to 100°C, has a matte tin finish, and can handle up to 0.25W power dissipation in surface mount configurations.
Median Price
$2.700
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
DigiKey
1+ parts
100+ parts
$1.512
1k+ parts
$1.255
10k+ parts
$1.143
Mouser Electronics
$1.510
$1.180
$1.110
Chip1Stop
$6.680
-
Flip Electronics (Authorized)
Rochester
$1.370
$1.140
$1.010
Digiode
$1.064
Nova Conductors
$1.182
Flip Electronics
Vyrian
Aztec Data Supply Inc.
$0.107
Semicontronic
$0.950
$0.926
$0.922
Ampacity Inc.
Corphita
$1.008
Corohmni
$1.120
Continental Prestige Electronics
$1.159
Argo Parts USA
Netroflash
$1.123
$1.100
Metaverse IC Inc.
QUARKTWIN TECHNOLOGY LTD
Kulean Microsystems
Problanco Electronics
Perfect Parts
Supply Digital
Authorized Procurement Solutions
SupplyDigital Components
iodParts Technologies Inc.
UHIMA Technologies
GreenTree Electronics
TANS Electronics
Single configuration makes it easy to use and integrate in circuits.
High maximum forward current allows for reliable performance in a variety of applications.
Logic IC output optocoupler offers precise and reliable signal transmission between different circuits.
Low minimum supply voltage ensures compatibility with a wide range of power sources.
High maximum operating temperature ensures stable operation even in harsh environments.
Low minimum operating temperature allows for use in cold conditions without performance issues.
Matte tin terminal finish provides good electrical conductivity and corrosion resistance.
Low power dissipation helps in energy efficiency and prevents overheating.
High isolation voltage ensures safety and prevents signal interference between circuits.
Surface mount design makes it easy to install and saves space on circuit boards.
Low maximum forward voltage helps in reducing power consumption and heat generation.
Optocoupler Circuit Outputs FOD3184S attributes and parameters. Explore more Optocoupler Circuit Outputs devices from Onsemi
Additional Features:
Configuration:
Maximum Forward Current:
Maximum Forward Voltage:
Maximum Isolation Voltage:
JESD-609 Code:
Mounting Feature:
No. of Elements:
No. of Functions:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Maximum Power Dissipation:
Sub-Category:
Minimum Supply Voltage:
Terminal Finish:
FOD3184S Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.80.00
SB
PCN Design/Specification - Logo 17/Aug/2017
PCN Assembly/Origin - Alternate LED manufacturing site/LED die source 15/Jul/2021
PCN Packaging - Mult Devices 24/Oct/2017
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
1N4148
Toshiba
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Temic Semiconductors
2N2222A
Forward International Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .6 A;
KSZ9031RNXIC
Microchip Technology
KSZ9031RNXIC by Microchip Technology is a network interface chip with 1 transceiver. It operates at a data rate of 1000 Mbps and has a nominal voltage of 1.2V. This chip is commonly used in industrial applications requiring Ethernet connectivity.
AT90CAN128-16AU
AT90CAN128-16AU by Microchip Technology is a microcontroller with 8-bit data RAM and 16-bit address bus width. It operates at a max clock frequency of 16 MHz, making it suitable for industrial applications requiring low power mode and connectivity options like CAN, SPI, and USART. With 53 I/O lines and 8-channel 10-bit ADCs, this microcontroller offers versatile peripheral support for various embedded systems.
Itt Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SS14
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
DP83848IVVX/NOPB
Texas Instruments
Texas Instruments DP83848IVVX/NOPB is a 3.3V Ethernet transceiver with 100000 Mbps data rate, suitable for industrial applications. It features CMOS technology, operates b/w -40 to 85 °C, and comes in a low profile flatpack package with matte tin finish.
LL4148
Promax-johnton
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Peak Reflow Temperature (C): 260; No. of Phases: 1; Diode Element Material: SILICON;
BAV99
MICRODIODE ELECTRONICS SHENZHEN CO LTD
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Hi-tron Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Fairchild Semiconductor
SMBJ18CA
Secos
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Renesas Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BSS138PS,115
NXP Semiconductors
NXP Semiconductors' BSS138PS,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A max drain current. Ideal for switching applications, it features a 1.6 ohm max on-resistance and operates in enhancement mode. The transistor comes in a small outline package with GULL WING terminals, making it suitable for surface mount designs.
Silicon Standard
ULN2803A
Motorola
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Terminal Position: DUAL; JESD-30 Code: R-PDIP-T18;
L7805CV
STMicroelectronics
L7805CV by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in electronic circuits.
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
6N136
Lite-on Technology
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Shape: RECTANGULAR; Maximum Power Dissipation: .1 W; No. of Elements: 1; Nominal Response Time: 30 ns;
6N137.SD
Qt Optoelectronics
LOGIC IC OUTPUT OPTOCOUPLER; Nominal Data Rate: 10 MBps; Additional Features: UL RECOGNIZED; Minimum Operating Temperature: -40 Cel; No. of Functions: 1; Maximum Operating Temperature: 85 Cel;
HCPL2731V
Onsemi
HCPL2731V by Onsemi is a 2-channel optocoupler with separate configuration. It offers a min CTR of 400%, max forward current of 0.02A, and isolation voltage of 2500V. Ideal for logic IC output applications, it operates b/w -40 to 85°C with through-hole mounting.
HCNW3120-300E
Agilent Technologies
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Minimum Operating Temperature: -40 Cel; Nominal Supply Voltage: 30 V; Maximum Power Dissipation: .25 W; No. of Functions: 1;
FOD8342TR2
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; No. of Functions: 1; No. of Elements: 1; Maximum Forward Current: .025 A;
HCPL0501V
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Operating Temperature: 85 Cel; JESD-609 Code: e3; Nominal Data Rate: 1 MBps;
HCPL2601S
HCPL2601S by Onsemi is a single optocoupler with max. forward current of 0.05A, isolation voltage of 2500V, and response time of 75ns. Ideal for logic IC output applications due to its surface mount feature and nominal data rate of 10MBps.
ACPL-M61L-000E
Broadcom
Broadcom's ACPL-M61L-000E is a single optocoupler with a max forward current of 0.008A and isolation voltage of 3750V. It operates b/w -40 to 105 °C, with a response time of 80ns. Ideal for logic IC output applications due to its high data rate of 10MBps and surface mounting feature.
6N137SDVM
6N137SDVM by Onsemi is a single optocoupler with max forward current of 0.05A and isolation voltage of 5000V. It operates b/w -40 to 100°C, ideal for logic IC output applications at data rates up to 10MBps. With a response time of 40ns, it's suitable for surface mounting in various electronic circuits.
HCPL2631SDM
LOGIC IC OUTPUT OPTOCOUPLER; Additional Features: CMOS COMPATIBLE, UL RECOGNIZED; Minimum Supply Voltage: 4.5 V; Maximum Isolation Voltage: 5000 V; Configuration: SEPARATE, 2 CHANNELS; Maximum Forward Current: .05 A;
TLP701H(F)
Toshiba's TLP701H(F) is a single optocoupler circuit output with a max forward current of 0.025 A. It is commonly used in logic IC output applications, offering a min supply voltage of 10 V and max isolation voltage of 5000 V.
HCPL-0600-500
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Isolation Voltage: 3750 V; No. of Elements: 1; Maximum Power Dissipation: .085 W;
HCPL-0201-060E
HCPL-0201-060E by Broadcom is a single optocoupler with a max forward current of 0.01A and isolation voltage of 3750V. It operates b/w -40 to 85°C, suitable for logic IC output applications at a data rate of 5MBps.
ACPL-W70L-000E
ACPL-W70L-000E by Broadcom is a single optocoupler with 15 MBps data rate, 5000 V isolation voltage, and -40 to 105 °C operating temperature range. Ideal for logic IC output applications requiring fast response times in surface mount configurations.
6N138
Quality Technologies
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Maximum Isolation Voltage: 3750 V; Nominal Data Rate: .1 MBps;
5962-8957101PA
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Additional Features: CMOS COMPATIBLE, HIGH RELIABILITY; Configuration: SEPARATE, 2 CHANNELS; Minimum Supply Voltage: 4.75 V;
6N139
LOGIC IC OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Maximum Isolation Voltage: 2500 V; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; JESD-609 Code: e3;
ACPL-W61L-560E
ACPL-W61L-560E by Broadcom is a SINGLE optocoupler with 10 MBps data rate, 5000 V isolation voltage, and 80 ns response time. Ideal for logic IC output applications, it operates b/w -40 to 105 °C with a max forward current of 0.008 A.
LOGIC IC OUTPUT OPTOCOUPLER; Maximum Isolation Voltage: 2500 V; Maximum Operating Temperature: 70 Cel; No. of Elements: 1; Maximum On State Current: .06 A; Minimum Operating Temperature: 0 Cel;
FOD8012A
FOD8012A by Onsemi is a logic IC output optocoupler with separate configuration and 2 channels. It has a min supply voltage of 3V and can operate at temperatures up to 110°C. This optocoupler is commonly used in applications requiring high isolation voltage and fast response time.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FOD3182V
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Matte Tin (Sn); No. of Functions: 1; Maximum Forward Current: .016 A; Maximum Forward Voltage: 1.8 V;
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: MATTE TIN; No. of Elements: 1; Maximum Power Dissipation: .295 W; Maximum Operating Temperature: 100 Cel;
FOD3184SD
FOD3184SD by Onsemi is a single optocoupler with a max forward current of 0.016A and isolation voltage of 5000V. It operates b/w -40 to 100°C, making it suitable for logic IC output applications. With a surface mount feature and matte tin finish, it offers reliable performance in various electronic circuits.
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); JESD-609 Code: e3; Maximum Forward Voltage: 1.8 V; Minimum Supply Voltage: 15 V;
FOD3182
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: MATTE TIN; Minimum Supply Voltage: 10 V; Additional Features: UL RECOGNIZED; Maximum Operating Temperature: 100 Cel;
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Matte Tin (Sn); Additional Features: UL RECOGNIZED; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 100 Cel;
FOD3182SV
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); No. of Elements: 1; Minimum Supply Voltage: 10 V; Configuration: SINGLE;
FOD3182SV by Onsemi is a single optocoupler circuit output with a max forward current of 0.016 A. It is commonly used in logic IC output applications, offering a min supply voltage of 10 V and an operating temperature range from -40 to 100 °C.
FOD3182S
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; Minimum Supply Voltage: 10 V; Configuration: SINGLE; JESD-609 Code: e3;
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Minimum Supply Voltage: 10 V; Maximum Forward Voltage: 1.8 V; Additional Features: UL RECOGNIZED;
FOD3182SDV
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Forward Current: .016 A; Configuration: SINGLE; JESD-609 Code: e3;
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; Maximum Isolation Voltage: 5000 V; JESD-609 Code: e3; Maximum Forward Voltage: 1.8 V;
FOD3184S
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Isolation Voltage: 5000 V; Maximum Power Dissipation: .25 W; No. of Functions: 1;
FOD3184V
FOD3184V by Onsemi is a single optocoupler with a max forward current of 0.016A and max isolation voltage of 5000V. It operates b/w -40 to 100°C, making it suitable for logic IC output applications requiring high voltage protection. With through-hole mounting and matte tin finish, it offers reliable performance in various electronic circuits.
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Forward Voltage: 1.8 V; Maximum Isolation Voltage: 5000 V; Maximum Forward Current: .016 A;
FOD3182TSR2V
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Power Dissipation: .295 W; Maximum Isolation Voltage: 5000 V; Configuration: SINGLE;
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; Maximum Power Dissipation: .295 W; Maximum Isolation Voltage: 5000 V; No. of Elements: 1;
FOD3182TSV
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; JESD-609 Code: e3; Additional Features: UL RECOGNIZED, VDE APPROVED; Maximum Isolation Voltage: 5000 V;
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); No. of Elements: 1; Maximum Power Dissipation: .295 W; Maximum Isolation Voltage: 5000 V;
FOD3184TSV
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Minimum Supply Voltage: 15 V; Maximum Forward Voltage: 1.8 V; Additional Features: UL RECOGNIZED, VDE APPROVED;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved