Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FOD3184SD by Onsemi is a single optocoupler with a max forward current of 0.016A and isolation voltage of 5000V. It operates b/w -40 to 100°C, making it suitable for logic IC output applications. With a surface mount feature and matte tin finish, it offers reliable performance in various electronic circuits.
Median Price
$2.025
Lifecycle Status
Suppliers In-Stock
13
In-Stock Inventory
1k+
Chip1Stop
1+ parts
100+ parts
$1.501
1k+ parts
$1.370
10k+ parts
-
Mouser Electronics
$2.870
$1.950
$1.560
$1.520
DigiKey
$3.530
$2.018
$1.772
Flip Electronics (Authorized)
Avnet
Arrow
$1.518
$1.345
Verical
$1.524
$1.351
Nova Conductors
$1.485
Digiode
$1.924
Chip Stock
Vyrian
TME
$0.790
Flip Electronics
Aztec Data Supply Inc.
$0.143
Corohmni
$0.829
Ampacity Inc.
$1.200
Semicontronic
$1.170
$1.164
Continental Prestige Electronics
$1.455
Argo Parts USA
Netroflash
Corphita
$1.822
Component Stockers USA
$2.850
$1.710
$1.680
GreenTree Electronics
QUARKTWIN TECHNOLOGY LTD
TANS Electronics
Problanco Electronics
Kepictronics
A-Z Elektronik GmbH
SupplyDigital Components
Alle Elektronik GmbH
Supply Digital
Lixinc
Eastek
$2.740
Perfect Parts
UHIMA Technologies
Kulean Microsystems
Simplifies installation and troubleshooting as there is only one output to focus on.
Provides enough current for efficient operation while keeping power consumption in check.
Specifically designed for logic IC outputs, ensuring compatibility and reliable performance.
Works within standard voltage ranges, making it suitable for a wide range of applications.
Can withstand high temperatures, ensuring reliability in various environments.
Capable of operating in extremely cold temperatures, making it versatile for different conditions.
Provides a durable and reliable finish for secure connections.
Efficiently handles power dissipation without overheating, ensuring long-term durability.
Provides high isolation between input and output signals, enhancing safety and preventing interference.
Easy to mount on PCBs, saving space and simplifying the manufacturing process.
Low forward voltage drop minimizes power consumption and heat generation.
Optocoupler Circuit Outputs FOD3184SD attributes and parameters. Explore more Optocoupler Circuit Outputs devices from Onsemi
Additional Features:
Configuration:
Maximum Forward Current:
Maximum Forward Voltage:
Maximum Isolation Voltage:
JESD-609 Code:
Mounting Feature:
No. of Elements:
No. of Functions:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Maximum Power Dissipation:
Sub-Category:
Minimum Supply Voltage:
Terminal Finish:
FOD3184SD Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.80.00
SB
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
M39029/58-360
Amphenol
CONNECTOR ACCESSORY; MIL Conformity: YES; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: MALE; Terminal Type: CRIMP; IEC Conformity: NO;
LM358N
Onsemi
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
BAV99
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
E8WSDC12-32.768KTR
Abracon
Abracon's E8WSDC12-32.768KTR crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and communication systems.
DRV5053VAQLPG
Texas Instruments DRV5053VAQLPG is a magnetic field sensor with 2.5-38V supply voltage range, -40 to 125°C operating temperature, and 0-2V output. Ideal for applications requiring Hall effect sensors like automotive, industrial automation, and robotics due to its compact size (1.52" x 4mm) and high output current capability of 2.3A.
LM555CM
National Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
1N4148
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS138
Micro Commercial Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Position: DUAL;
2N7002
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JEDEC-95 Code: TO-236AB; Qualification: Not Qualified; Package Style (Meter): SMALL OUTLINE;
LM358N by Texas Instruments is an operational amplifier with 2 functions, offering a max input offset voltage of 9000 uV and a nominal common mode reject ratio of 85 dB. Widely used in commercial applications, it operates at temperatures ranging from 0 to 70 °C and has a unity gain bandwidth of 1000 kHz.
New Jersey Semiconductor Products
1N4148WS
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
RC0402FR-071KL
Yageo
The Yageo RC0402FR-071KL is a fixed resistor with a resistance of 1000 ohm and a tolerance of 1%. It is suitable for surface mount applications and has a max operating temperature of 155 °C.
MBRS1100T3G
MBRS1100T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.75V. It operates in temperatures ranging from -65 to 175°C, making it suitable for power applications. With a reverse test voltage of 100V, this diode is ideal for high-power circuits requiring efficient rectification.
Taitron Components
Electronic Devices
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
LM107H/883C
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Wideband: NO;
6N139SDVM
6N139SDVM by Onsemi is a single optocoupler circuit output with a max forward current of 0.02 A. It is commonly used in logic IC output applications, offering a max isolation voltage of 5000 V and operating temperatures ranging from -40 to 100 °C.
6N139
6N139 by Texas Instruments is a single optocoupler with max. forward current of 0.02A, isolation voltage of 3000V, and data rate of 0.1MBps. It is used in logic IC output applications due to its high on-state current capability and operating temperature range from 0°C to 70°C.
6N136
Lite-on Technology
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Shape: RECTANGULAR; Maximum Power Dissipation: .1 W; No. of Elements: 1; Nominal Response Time: 30 ns;
Telefunken Microelectronics
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Response Time: .0000008 s; Maximum Isolation Voltage: 2500 V; Maximum On State Current: .01 A;
6N137S
Fairchild Semiconductor
LOGIC IC OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); No. of Functions: 1; Configuration: SINGLE; JESD-609 Code: e3; Maximum On State Current: .05 A;
5962-8957101PA
Hewlett Packard
LOGIC IC OUTPUT OPTOCOUPLER; No. of Elements: 2; Nominal Data Rate: 40 MBps; Minimum Supply Voltage: 4.75 V; Maximum Forward Current: .01 A; Maximum Operating Temperature: 125 Cel;
TLP250HF
Toshiba
Toshiba TLP250HF is a single optocoupler with max. forward current of 0.02A, ideal for logic IC output applications. With a response time of 50ns and isolation voltage of 3750V, it operates b/w -40 to 125°C temperatures. Suitable for through-hole mounting with a min supply voltage of 10V.
HCPL-0600-560E
Broadcom
Broadcom's HCPL-0600-560E is a single optocoupler with logic IC output. It has a max forward current of 0.02A, isolation voltage of 3750V, and operates b/w -40 to 85°C. Ideal for applications requiring fast response times and high isolation levels in surface mount configurations.
HCPL-0600-000E
Broadcom's HCPL-0600-000E is a single optocoupler with a max forward current of 0.02A and isolation voltage of 3750V. Ideal for logic IC output applications, it operates b/w -40 to 85°C with a response time of 50ns. Suitable for surface mounting, it has a nominal data rate of 10MBps and requires a min supply voltage of 4.5V.
HCPL-3120-300E
HCPL-3120-300E by Broadcom is a COMPLEX optocoupler with max. forward current of 0.016A, operating temp. range -40 to 100°C, and isolation voltage of 3750V. Ideal for logic IC output applications due to its fast response time (100ns) and high hysteresis ratio (1.6).
HCPL-0453
Broadcom's HCPL-0453 is a single optocoupler with a max forward current of 0.025A and logic IC output type. It operates b/w 0 to 70°C, offers 3750V isolation voltage, and has a data rate of 1MBps. Ideal for surface mount applications requiring high isolation and low power dissipation.
HCPL-2601
Agilent Technologies
LOGIC IC OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Lead (Sn/Pb); Configuration: SINGLE; No. of Functions: 1; Additional Features: UL RECOGNIZED, OPEN COLLECTOR; Maximum Operating Temperature: 85 Cel;
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 85 Cel; No. of Elements: 1; Maximum Isolation Voltage: 2500 V;
HCPL2631SV
LOGIC IC OUTPUT OPTOCOUPLER; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Additional Features: CMOS COMPATIBLE, OPEN COLLECTOR, UL RECOGNIZED, VDE APPROVED; Nominal Data Rate: 10 MBps; No. of Elements: 2;
TLP2361
Toshiba's TLP2361 is a single optocoupler with a max forward current of 0.01A and an isolation voltage of 3750V. Ideal for logic IC output applications, it operates b/w -40°C to 125°C with a response time of 3ns, making it suitable for high-speed data transmission at up to 15MBps.
Rs Components
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Configuration: SINGLE; No. of Elements: 1; Maximum Response Time: .0000008 s; Shape: RECTANGULAR;
6N137
Isocom
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Minimum Operating Temperature: -40 Cel; No. of Elements: 1; Nominal Data Rate: 10 MBps; Minimum Supply Voltage: 4.5 V;
TLP2362
Toshiba TLP2362 is a single optocoupler with max forward current of 0.025A, ideal for logic IC output applications. Operating b/w -40°C to 125°C, it offers high isolation voltage of 3750V and data rate up to 10MBps, making it suitable for various electronic circuits requiring reliable signal transmission.
6N139SDM
LOGIC IC OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Maximum On State Current: .06 A; No. of Functions: 1; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 100 Cel;
HCPL0637R2
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Additional Features: CMOS COMPATIBLE, UL RECOGNIZED; Maximum Isolation Voltage: 3750 V; Nominal Data Rate: 10 MBps;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FOD3182V
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Matte Tin (Sn); No. of Functions: 1; Maximum Forward Current: .016 A; Maximum Forward Voltage: 1.8 V;
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: MATTE TIN; No. of Elements: 1; Maximum Power Dissipation: .295 W; Maximum Operating Temperature: 100 Cel;
FOD3184SD
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); JESD-609 Code: e3; Maximum Forward Voltage: 1.8 V; Minimum Supply Voltage: 15 V;
FOD3182
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: MATTE TIN; Minimum Supply Voltage: 10 V; Additional Features: UL RECOGNIZED; Maximum Operating Temperature: 100 Cel;
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Matte Tin (Sn); Additional Features: UL RECOGNIZED; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 100 Cel;
FOD3182SV
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); No. of Elements: 1; Minimum Supply Voltage: 10 V; Configuration: SINGLE;
FOD3182SV by Onsemi is a single optocoupler circuit output with a max forward current of 0.016 A. It is commonly used in logic IC output applications, offering a min supply voltage of 10 V and an operating temperature range from -40 to 100 °C.
FOD3182S
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; Minimum Supply Voltage: 10 V; Configuration: SINGLE; JESD-609 Code: e3;
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Minimum Supply Voltage: 10 V; Maximum Forward Voltage: 1.8 V; Additional Features: UL RECOGNIZED;
FOD3182SDV
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Forward Current: .016 A; Configuration: SINGLE; JESD-609 Code: e3;
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; Maximum Isolation Voltage: 5000 V; JESD-609 Code: e3; Maximum Forward Voltage: 1.8 V;
FOD3184S
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; Minimum Supply Voltage: 15 V; Minimum Operating Temperature: -40 Cel; Maximum Isolation Voltage: 5000 V;
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Isolation Voltage: 5000 V; Maximum Power Dissipation: .25 W; No. of Functions: 1;
FOD3184V
FOD3184V by Onsemi is a single optocoupler with a max forward current of 0.016A and max isolation voltage of 5000V. It operates b/w -40 to 100°C, making it suitable for logic IC output applications requiring high voltage protection. With through-hole mounting and matte tin finish, it offers reliable performance in various electronic circuits.
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Forward Voltage: 1.8 V; Maximum Isolation Voltage: 5000 V; Maximum Forward Current: .016 A;
FOD3182TSR2V
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Power Dissipation: .295 W; Maximum Isolation Voltage: 5000 V; Configuration: SINGLE;
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; Maximum Power Dissipation: .295 W; Maximum Isolation Voltage: 5000 V; No. of Elements: 1;
FOD3182TSV
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; JESD-609 Code: e3; Additional Features: UL RECOGNIZED, VDE APPROVED; Maximum Isolation Voltage: 5000 V;
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); No. of Elements: 1; Maximum Power Dissipation: .295 W; Maximum Isolation Voltage: 5000 V;
FOD3184TSV
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Minimum Supply Voltage: 15 V; Maximum Forward Voltage: 1.8 V; Additional Features: UL RECOGNIZED, VDE APPROVED;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved