Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Onsemi FOD3182 is a single optocoupler with a max forward current of 0.016A and isolation voltage of 5000V. It operates b/w -40 to 100°C, suitable for logic IC output applications. With a matte tin finish and through-hole mount, it has a max power dissipation of 0.295W and forward voltage of 1.8V.
Median Price
$3.060
Lifecycle Status
Suppliers In-Stock
17
In-Stock Inventory
1k+
Arrow
1+ parts
$1.710
100+ parts
$1.254
1k+ parts
$1.054
10k+ parts
$1.013
Newark
$1.730
$1.430
$1.160
Mouser Electronics
$3.160
-
DigiKey
$3.310
$1.889
$1.581
$1.448
Farnell
$3.727
$1.704
$1.537
Element14
$4.300
$2.440
$2.140
EBV Elektronik
RS (Exports)
$1.748
$1.358
Verical
$2.074
Rochester
$1.540
$1.280
$1.140
Digiode
$1.197
Nova Conductors
$1.410
Chip Stock
Cyclops Electronics Ltd
Flip Electronics
Vyrian
ComSIT Distribution GmbH
Aztec Data Supply Inc.
$0.538
Ampacity Inc.
$1.070
Corphita
$1.134
Corohmni
$1.260
Component Stockers USA
$1.300
$1.420
$1.270
Argo Parts USA
Netroflash
$1.382
Advanced Electronics
$1.438
Continental Prestige Electronics
$3.080
$1.390
$1.180
Lixinc
Kulean Microsystems
A-Z Elektronik GmbH
TANS Electronics
Authorized Procurement Solutions
Alle Elektronik GmbH
SupplyDigital Components
Perfect Parts
Supply Digital
Problanco Electronics
UHIMA Technologies
Kepictronics
Single configuration makes it simple and easy to use in various applications without the complexity of multiple outputs.
The maximum forward current of 0.016 A allows for efficient operation without the risk of overloading the circuit.
The logic IC output optocoupler type ensures compatibility with logic circuits and provides reliable signal isolation.
The minimum supply voltage of 10 V ensures stable operation and compatibility with a wide range of power sources.
With a maximum operating temperature of 100°C, this product can withstand high temperature environments without compromising performance.
The minimum operating temperature of -40°C allows for use in extreme cold conditions without the risk of malfunction.
The matte tin terminal finish provides a durable and corrosion-resistant surface for reliable connections.
The maximum power dissipation of 0.295 W ensures efficient energy usage and prevents overheating during operation.
With a maximum isolation voltage of 5000 V, this product offers superior protection against voltage spikes and ensures safe signal isolation.
The through-hole mounting feature allows for easy and secure installation on printed circuit boards, making it convenient for assembly and maintenance.
The maximum forward voltage of 1.8 V ensures efficient power consumption and reduces the risk of voltage drops in the circuit.
Optocoupler Circuit Outputs FOD3182 attributes and parameters. Explore more Optocoupler Circuit Outputs devices from Onsemi
Additional Features:
Configuration:
Maximum Forward Current:
Maximum Forward Voltage:
Maximum Isolation Voltage:
JESD-609 Code:
Mounting Feature:
No. of Elements:
No. of Functions:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Maximum Power Dissipation:
Sub-Category:
Minimum Supply Voltage:
Terminal Finish:
FOD3182 Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.80.00
SB
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
SMBJ18CA
Hy Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V;
FSMLF327
Fox Electronics
FSMLF327 by Fox Electronics is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing such as communication systems, industrial automation, and consumer electronics. Operating temperature range from -40 to 85 °C.
Semtech Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BAV99
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Motorola
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; JESD-609 Code: e0;
LM107H
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Bias Current (IIB) @25C: .075 uA;
M85049/85-08W02
TE Connectivity
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 175 Cel; Material: ALUMINUM ALLOY;
2N7002
Continental Device India
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; Package Body Material: PLASTIC/EPOXY; JEDEC-95 Code: TO-236AB;
LM358N
Kec
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
C0603C104K5RACAUTO
KEMET Corporation
KEMET C0603C104K5RACAUTO is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for automotive applications meeting AEC-Q200 standard, it comes in SMT package with matte tin finish and wraparound terminals.
SS14
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; Maximum Non Repetitive Peak Forward Current: 30 A; Maximum Forward Voltage (VF): .55 V; No. of Phases: 1;
Onsemi
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Finish: Matte Tin (Sn) - annealed; Transistor Element Material: SILICON;
Shenzhen Socay Electronics
1N4148WT
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS84PH6327XTSA2
Infineon Technologies
BSS84PH6327XTSA2 by Infineon is a P-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode and operates in enhancement mode. With a max drain current of 0.17A and on-resistance of 8 ohm, it offers reliable performance in small outline packages.
BSS138BK,215
NXP Semiconductors
NXP Semiconductors' BSS138BK,215 is a N-CHANNEL FET with 0.36A max drain current and 0.42W power dissipation. Ideal for applications requiring single configuration and surface mount technology, such as enhancement mode operation in temperatures up to 150°C.
Silicon Standard
LM107H/883C
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Wideband: NO;
6N139SM
Fairchild Semiconductor
LOGIC IC OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Minimum Operating Temperature: -40 Cel; Maximum Isolation Voltage: 5000 V; Configuration: SINGLE; Maximum Forward Current: .02 A;
HCPL2631
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Matte Tin (Sn) - annealed; Minimum Supply Voltage: 4.5 V; Maximum Isolation Voltage: 2500 V; Maximum On State Current: .05 A;
HCPL-0600-060E
Agilent Technologies
Optocoupler - IC Outputs; Mounting Feature: SURFACE MOUNT; Nominal Response Time: 100 ns; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 85 Cel; Nominal Supply Voltage: 5.5 V;
6N137VM
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Power Dissipation: .1 W; Minimum Supply Voltage: 4.5 V; Maximum Forward Current: .05 A;
HCPL-063L-000E
Broadcom
Broadcom's HCPL-063L-000E is a 2-channel optocoupler with separate configuration. It features a max forward current of 0.015A, operating temperature up to 85°C, and isolation voltage of 3750V. Ideal for logic IC output applications requiring fast response time and surface mounting feature.
HCPL2630
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Matte Tin (Sn) - annealed; JESD-609 Code: e3; Configuration: SEPARATE, 2 CHANNELS; Maximum Isolation Voltage: 2500 V;
HCPL-2730.SD
Qt Optoelectronics
HCPL-2730.SD by Qt Optoelectronics is a 2-channel optocoupler with built-in resistor. It has a max forward current of 0.02A and isolation voltage of 2500V, making it ideal for logic IC output applications. With an operating temperature range from -40°C to 85°C, this device offers reliable performance in various environments.
HCPL-4200
Hewlett Packard
LOGIC IC OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Lead (Sn/Pb); No. of Functions: 1; Additional Features: CMOS COMPATIBLE, TRI STATE, UL RECOGNIZED; Nominal Data Rate: .02 MBps; Maximum Isolation Voltage: 2500 V;
HCPL2531TVM
HCPL2531TVM by Onsemi is a 2-channel optocoupler with max. forward current of 0.025A and isolation voltage of 5000V. Ideal for logic IC output applications, it operates b/w 0-70°C, has a data rate of 1MBps, and features matte tin terminal finish.
HCPL-0731
LOGIC IC OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Isolation Voltage: 2500 V; JESD-609 Code: e0; Configuration: SEPARATE, 2 CHANNELS WITH BUILT-IN RESISTOR; No. of Elements: 2;
6N139
Sharp Corporation
LOGIC IC OUTPUT OPTOCOUPLER; Additional Features: UL RECOGNIZED, TTL COMPATIBLE; No. of Elements: 1; No. of Functions: 1; Maximum On State Current: .06 A; Maximum Operating Temperature: 70 Cel;
HCPL-060L-000E
Optocoupler - IC Outputs; Mounting Feature: SURFACE MOUNT; Maximum Forward Current: .02 A; Minimum Operating Temperature: -40 Cel; No. of Elements: 1; Nominal Response Time: 90 ns;
HCPL-2601
LOGIC IC OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Lead (Sn/Pb); Configuration: SINGLE; No. of Functions: 1; Additional Features: UL RECOGNIZED, OPEN COLLECTOR; Maximum Operating Temperature: 85 Cel;
HCPL-2630-500E
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin (Sn); Maximum Isolation Voltage: 3750 V; Minimum Operating Temperature: -40 Cel; No. of Functions: 2;
HCPL-0201#500
Broadcom's HCPL-0201#500 is a single optocoupler with a max forward current of 0.01A and isolation voltage of 3750V. Ideal for logic IC output applications, it operates b/w -40 to 85°C, with a response time of 300ns.
6N137SVM
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Nominal Data Rate: 10 MBps; Maximum On State Current: .05 A; Nominal Supply Voltage: 7 V;
HCPL-3120-500E
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; No. of Functions: 1; No. of Elements: 1; Maximum Forward Current: .016 A; Minimum Supply Voltage: 15 V;
HCPL2730
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Matte Tin (Sn) - annealed; Minimum Current Transfer Ratio: 300 %; Shape: RECTANGULAR; JESD-609 Code: e3;
HCPL2630SDM
LOGIC IC OUTPUT OPTOCOUPLER; Maximum Forward Current: .05 A; Maximum Isolation Voltage: 5000 V; Minimum Supply Voltage: 4.5 V; Minimum Operating Temperature: -40 Cel; Configuration: SEPARATE, 2 CHANNELS;
TLP2710(E
Toshiba
Toshiba TLP2710(E is a single optocoupler with 5000V isolation voltage, ideal for logic IC output applications. Featuring a max forward current of 0.008A and nominal data rate of 5MBps, it operates b/w -40°C to 125°C. With a fast response time of 11ns, this surface mount device is suitable for high-speed circuit outputs.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FOD3182V
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Matte Tin (Sn); No. of Functions: 1; Maximum Forward Current: .016 A; Maximum Forward Voltage: 1.8 V;
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: MATTE TIN; No. of Elements: 1; Maximum Power Dissipation: .295 W; Maximum Operating Temperature: 100 Cel;
FOD3184SD
FOD3184SD by Onsemi is a single optocoupler with a max forward current of 0.016A and isolation voltage of 5000V. It operates b/w -40 to 100°C, making it suitable for logic IC output applications. With a surface mount feature and matte tin finish, it offers reliable performance in various electronic circuits.
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); JESD-609 Code: e3; Maximum Forward Voltage: 1.8 V; Minimum Supply Voltage: 15 V;
FOD3182
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Matte Tin (Sn); Additional Features: UL RECOGNIZED; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 100 Cel;
FOD3182SV
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); No. of Elements: 1; Minimum Supply Voltage: 10 V; Configuration: SINGLE;
FOD3182SV by Onsemi is a single optocoupler circuit output with a max forward current of 0.016 A. It is commonly used in logic IC output applications, offering a min supply voltage of 10 V and an operating temperature range from -40 to 100 °C.
FOD3182S
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; Minimum Supply Voltage: 10 V; Configuration: SINGLE; JESD-609 Code: e3;
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Minimum Supply Voltage: 10 V; Maximum Forward Voltage: 1.8 V; Additional Features: UL RECOGNIZED;
FOD3182SDV
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Forward Current: .016 A; Configuration: SINGLE; JESD-609 Code: e3;
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; Maximum Isolation Voltage: 5000 V; JESD-609 Code: e3; Maximum Forward Voltage: 1.8 V;
FOD3184S
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; Minimum Supply Voltage: 15 V; Minimum Operating Temperature: -40 Cel; Maximum Isolation Voltage: 5000 V;
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Isolation Voltage: 5000 V; Maximum Power Dissipation: .25 W; No. of Functions: 1;
FOD3184V
FOD3184V by Onsemi is a single optocoupler with a max forward current of 0.016A and max isolation voltage of 5000V. It operates b/w -40 to 100°C, making it suitable for logic IC output applications requiring high voltage protection. With through-hole mounting and matte tin finish, it offers reliable performance in various electronic circuits.
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Forward Voltage: 1.8 V; Maximum Isolation Voltage: 5000 V; Maximum Forward Current: .016 A;
FOD3182TSR2V
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Power Dissipation: .295 W; Maximum Isolation Voltage: 5000 V; Configuration: SINGLE;
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; Maximum Power Dissipation: .295 W; Maximum Isolation Voltage: 5000 V; No. of Elements: 1;
FOD3182TSV
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; JESD-609 Code: e3; Additional Features: UL RECOGNIZED, VDE APPROVED; Maximum Isolation Voltage: 5000 V;
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); No. of Elements: 1; Maximum Power Dissipation: .295 W; Maximum Isolation Voltage: 5000 V;
FOD3184TSV
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Minimum Supply Voltage: 15 V; Maximum Forward Voltage: 1.8 V; Additional Features: UL RECOGNIZED, VDE APPROVED;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved