Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Minimum Supply Voltage: 15 V; Maximum Forward Voltage: 1.8 V; Additional Features: UL RECOGNIZED, VDE APPROVED;
Median Price
$3.330
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
DigiKey
1+ parts
100+ parts
$1.906
1k+ parts
$1.596
10k+ parts
$1.462
Mouser Electronics
$1.910
$1.500
$1.290
Rochester
-
$1.320
$1.180
$1.110
Digiode
$1.378
Vyrian
$1.450
Chip Stock
Corphita
$1.305
Corohmni
Native Components
$25.390
Northwest PG Solutions
$27.929
$25.136
Kulean Microsystems
TANS Electronics
QUARKTWIN TECHNOLOGY LTD
Problanco Electronics
SupplyDigital Components
Supply Digital
UHIMA Technologies
Metaverse IC Inc.
Optocoupler Circuit Outputs FOD3184TSV attributes and parameters. Explore more Optocoupler Circuit Outputs devices from Fairchild Semiconductor
Additional Features:
Configuration:
Maximum Forward Current:
Maximum Forward Voltage:
Maximum Isolation Voltage:
JESD-609 Code:
Mounting Feature:
No. of Elements:
No. of Functions:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Maximum Power Dissipation:
Sub-Category:
Minimum Supply Voltage:
Terminal Finish:
FOD3184TSV Optoelectronics trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8541.40.80.00
SB
In 2016 Fairchild was acquired by ON Semiconductor (after 2022, onsemi). Fairchild Semiconductor International, Inc. was an American semiconductor company based in San Jose, California. Founded in 1957 as a division of Fairchild Camera and Instrument, it became a pioneer in the manufacturing of transistors and of integrated circuits. Schlumberger bought the firm in 1979 and sold it to National Semiconductor in 1987; Fairchild was spun off as an independent company again in 1997. In September 2016, Fairchild was acquired by ON Semiconductor. The company had locations in the United States at San Jose, California; San Rafael, California; South Portland, Maine; West Jordan, Utah; and Mountaintop, Pennsylvania. Outside the US it operated locations in Australia;[4] Singapore; Bucheon, South Korea; Penang, Malaysia; Suzhou, China; and Cebu, Philippines, among others.
ATMEGA328P-AU
Microchip Technology
ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.
MBRM140T1G
Onsemi
MBRM140T1G by Onsemi is a Schottky rectifier diode with 40V max repetitive peak reverse voltage, 1A max output current, and 0.3V max forward voltage. It is used in applications requiring small outline surface mount diodes for efficient power management.
2902037
Phoenix Contact
MODULAR TERMINAL BLOCK;
BSS138PS,115
NXP Semiconductors
NXP Semiconductors' BSS138PS,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A max drain current. Ideal for switching applications, it features a 1.6 ohm max on-resistance and operates in enhancement mode. The transistor comes in a small outline package with GULL WING terminals, making it suitable for surface mount designs.
SMBJ18CA
Continental Device India
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
DRV5053VAQLPG
Texas Instruments
Texas Instruments DRV5053VAQLPG is a magnetic field sensor with 2.5-38V supply voltage range, -40 to 125°C operating temperature, and 0-2V output. Ideal for applications requiring Hall effect sensors like automotive, industrial automation, and robotics due to its compact size (1.52" x 4mm) and high output current capability of 2.3A.
2N7002
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; Package Body Material: PLASTIC/EPOXY; JEDEC-95 Code: TO-236AB;
1N4148
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
OHN3020U
Optek Technology
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;
Iskra Semic Capacitors Industry
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; JESD-609 Code: e0; Maximum Non Repetitive Peak Forward Current: 2 A;
BAV99
Kingwell Technonlogy
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CN
LM555CN by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V. It operates b/w 0°C to 70°C, making it suitable for commercial applications. This rectangular package IC has dual terminals and uses bipolar technology for pulse generation in various electronic circuits.
ULN2803ADWG4
ULN2803ADWG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates at temperatures ranging from -40 to 85°C and has a max supply voltage of 3V. Ideal for applications requiring sink current flow direction in a small outline package style.
2N2222A
Ksl Microdevices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Fairchild Semiconductor
NE555/D
General Electric Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; Maximum Operating Temperature: 70 Cel; Technology: BIPOLAR; Package Equivalence Code: DIE OR CHIP; Qualification: Not Qualified;
Transpro Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; JESD-609 Code: e0; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Breakdown Voltage: 21.1 V; Maximum Clamping Voltage: 29.2 V;
FDN5618P
FDN5618P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage. It features a single configuration with built-in diode, suitable for switching applications. With 10A IDM and 0.17 ohm RDS(on), it operates in the temperature range of -55 to 150 °C, making it ideal for various electronic devices.
NUP2105LT1G
NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.
TLP2745(TP,E(T
Toshiba
Toshiba's TLP2745(TP,E(T) optocoupler features a single configuration with max forward current of 0.015A and isolation voltage of 5000V. Ideal for logic IC output applications, it operates b/w -40 to 110°C with response time as fast as 3ns.
FODM452R2
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Minimum Operating Temperature: -40 Cel; No. of Elements: 1; Configuration: SINGLE;
HCPL2630M
HCPL2630M by Onsemi is a logic IC output optocoupler with 2 separate channels. It has a max forward current of 0.05A and an isolation voltage of 5000V, making it ideal for high-speed data transmission applications. With a nominal response time of 40ns and operating temperature range from -40 to 100°C, this rectangular-shaped optocoupler is suitable for through-hole mounting in various electronic circuits.
HCPL2631
The Texas Instruments HCPL2631 is a complex optocoupler with 2 functions, offering a max forward current of 0.015A and isolation voltage of 3000V. Ideal for logic IC output applications, it operates b/w temperatures of 0 to 70°C, with a min supply voltage of 4.5V.
6N136S1(TA)
Everlight Electronics
6N136S1(TA) by Everlight Electronics is a single optocoupler circuit output with a max forward current of 0.025 A. It has a nominal response time of 30 ns and can operate in temperatures ranging from -55 to 100 °C. This optocoupler is commonly used in logic IC output applications, offering high isolation voltage of up to 5000 V and a data rate of 1 MBps.
HCPL0601V
The Onsemi HCPL0601V is a single optocoupler with logic IC output. It has a max forward current of 0.05 A, isolation voltage of 3750 V, and data rate of 10 MBps. Ideal for applications requiring fast response times in environments ranging from -40 to 85°C.
HCPL-0600-000E
Broadcom
Broadcom's HCPL-0600-000E is a single optocoupler with a max forward current of 0.02A and isolation voltage of 3750V. Ideal for logic IC output applications, it operates b/w -40 to 85°C with a response time of 50ns. Suitable for surface mounting, it has a nominal data rate of 10MBps and requires a min supply voltage of 4.5V.
H11L1SR2M
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Nominal Hysteresis Ratio: .75; Minimum Supply Voltage: 3 V; No. of Functions: 1;
6N139M
6N139M by Onsemi is a single optocoupler with max forward current of 0.02A and min transfer ratio of 400%. Operating b/w -40 to 100°C, it has a max isolation voltage of 5000V. Ideal for logic IC output applications due to its through hole mount feature.
6N139S
Lite-on Technology
LOGIC IC OUTPUT OPTOCOUPLER; Maximum Operating Temperature: 70 Cel; Configuration: SINGLE; Packing Method: TUBE; Minimum Operating Temperature: 0 Cel; No. of Functions: 1;
HCPL-0501.R2
HCPL-0501.R2 by Onsemi is a single optocoupler with a max forward current of 0.025A and an isolation voltage of 2500V. It operates b/w -40°C to 85°C, has a data rate of 1MBps, and is ideal for logic IC output applications.
HCPL-0701-500
Agilent Technologies
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Maximum Forward Current: .012 A; Additional Features: CMOS COMPATIBLE, UL RECOGNIZED;
6N139-X009
Siemens
LOGIC IC OUTPUT OPTOCOUPLER; Additional Features: CMOS COMPATIBLE, UL RECOGNIZED; Configuration: SINGLE; Maximum Isolation Voltage: 2500 V; Maximum On State Current: .06 A; Maximum Operating Temperature: 100 Cel;
6N139
Isocom Components
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: TIN; Maximum On State Current: .06 A; Maximum Power Dissipation: .1 W; Configuration: SINGLE;
6N137S-TA
Lite-on Technology's 6N137S-TA is a single optocoupler with max. forward current of 0.02 A and isolation voltage of 5000 V. Ideal for logic IC output applications, it operates b/w -40 to 85 °C with a response time of 21 ns, making it suitable for high-speed data transmission at 15 MBps.
TLP2766A(E
Toshiba TLP2766A(E is a single optocoupler with 0.025A forward current, ideal for logic IC outputs. It operates b/w -40 to 125°C, offers 5000V isolation voltage, and has a response time of 5ns. Suitable for surface mount applications with a data rate of 20MBps.
6N136
Nec Electronics America
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Maximum Isolation Voltage: 3000 V; Configuration: SINGLE; Shape: RECTANGULAR; No. of Elements: 1;
HCPL-2731-000E
Broadcom's HCPL-2731-000E is a 2-channel optocoupler with separate configuration. It features a max forward current of 0.02A, min supply voltage of 4.5V, and max isolation voltage of 3750V. Ideal for logic IC output applications, this device has a fast response time of 0.00006s and operates in temperatures ranging from 0 to 70°C.
HCNW3120
LOGIC IC OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Lead (Sn/Pb); Minimum Operating Temperature: -40 Cel; Minimum Supply Voltage: 15 V; Maximum Forward Current: .016 A; No. of Functions: 1;
6N136TSR2VM
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; Maximum On State Current: .008 A; Configuration: SINGLE; Maximum Forward Current: .025 A;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved