Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Everlight Electronics' H11L1M-V is a single optocoupler with max. forward current of 0.06A and isolation voltage of 5000V. Ideal for logic IC output applications, it operates b/w -55 to 100°C, with nominal response time of 100ns and data rate of 1MBps.
Median Price
$0.670
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Nova Conductors
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Vyrian
Digiode
Corohmni
$0.509
Bastille Electronics
$0.636
$0.605
$0.596
Continental Prestige Electronics
$0.657
Argo Parts USA
$0.650
Component Stockers USA
$7.180
AZTECH Wire
$9.349
Ampacity Inc.
$15.100
Supply Digital
Perfect Parts
Corphita
Netroflash
$0.637
$0.623
Simplified design with single configuration for ease of use and installation.
High maximum forward current capability allows for reliable performance in various applications.
Designed specifically for logic IC output applications, ensuring compatibility and efficiency.
Low minimum supply voltage requirement helps in energy efficiency and compatibility with different systems.
Wide operating temperature range for reliable performance in various environmental conditions.
Fast response time for quick signal transmission and efficient operation.
Wide range of minimum operating temperature ensures functionality even in extreme cold conditions.
Secure and organized packaging in tubes for easy handling and storage.
High isolation voltage capability for enhanced safety and protection in circuits.
High data rate for fast transmission of information between circuits.
Convenient through-hole mounting feature for easy and secure integration into electronic circuits.
Capable of handling high on-state current for efficient operation and performance.
Optocoupler Circuit Outputs H11L1M-V attributes and parameters. Explore more Optocoupler Circuit Outputs devices from Everlight Electronics
Additional Features:
Configuration:
Nominal Data Rate:
Maximum Forward Current:
Maximum Isolation Voltage:
Mounting Feature:
No. of Elements:
No. of Functions:
Maximum On State Current:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Packing Method:
Nominal Response Time:
Minimum Supply Voltage:
H11L1M-V Optoelectronics trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8541.40.80.00
SB
EVERLIGHT Electronics Co., Ltd. was founded in 1983 in Taipei, Taiwan led by Chairman Robert Yeh. EVERLIGHT has over 40 years of R&D experience for reliable capability. With immediate service and an excellent brand reputation, EVERLIGHT has taken top five worldwide in the competitive LED market. Our products are manufactured and packed in-house to guarantee maximum quality and service. EVERLIGHT provides a diverse product portfolio consisting of High Power LEDs, SMD LEDs, Lamps, Lighting Components, LED Lighting Modules, Digital Displays, Opto-couplers and Infrared Components for various applications. Today, EVERLIGHT is a global company with over 6,400 employees based in China, Hong Kong, Japan, Korea, Singapore, Malaysia, India, Germany and U.S.A.
BAV99
Plessey Semiconductors Discrete Components Div
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Yangzhou Yangjie Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
1N4148WT
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS123LT1G
Onsemi
BSS123LT1G by Onsemi is a N-CHANNEL FET with 100V DS breakdown voltage, 0.17A drain current, and 6 ohm on resistance. Ideal for switching applications, it operates in enhancement mode with a max power dissipation of 0.225W. It comes in a small outline package with gull wing terminals and can withstand temperatures from -55 to 150°C.
EPCS4SI8N
Intel
EPCS4SI8N by Intel is a small outline flash memory with 512Kx8 organization, operating at 3.3V. It features a max clock frequency of 40MHz and endurance of 100k write/erase cycles. Ideal for industrial applications requiring configuration memory with serial interface and low standby current consumption.
STMicroelectronics
CRG0805F10K
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
1N4148
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
LL4148
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; Maximum Non Repetitive Peak Forward Current: .5 A; No. of Elements: 1; Maximum Reverse Recovery Time: .004 us;
SS14
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
DS18B20U+
Analog Devices
DS18B20U+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
2N7002
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 40; Minimum DS Breakdown Voltage: 60 V;
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
NUP2105LT1G
NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.
Itt Semiconductor
LM2675M-ADJ/NOPB
National Semiconductor
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
USBLC6-2SC6
USBLC6-2SC6 by STMicroelectronics is a unidirectional transient voltage suppressor diode with a breakdown voltage of 6V. It has a max clamping voltage of 17V and operates in temperatures ranging from -40 to 125°C. This device, with dual terminals and matte tin finish, is ideal for protecting sensitive electronics from voltage spikes in various applications.
HCPL0501
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Nominal Data Rate: 1 MBps; Minimum Operating Temperature: -40 Cel; Maximum Forward Current: .025 A;
6N135
NXP Semiconductors
LOGIC IC OUTPUT OPTOCOUPLER; Minimum Operating Temperature: -40 Cel; Additional Features: UL RECOGNIZED, VDE APPROVED; Maximum On State Current: .01 A; Maximum Forward Current: .1 A; Maximum Operating Temperature: 100 Cel;
HCPL3700SD
LOGIC IC OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Minimum Supply Voltage: 2 V; Maximum Isolation Voltage: 2500 V; Maximum Operating Temperature: 85 Cel; Configuration: COMPLEX;
HCPL0639
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Minimum Operating Temperature: -40 Cel; Additional Features: CMOS COMPATIBLE, UL RECOGNIZED; Nominal Response Time: 100 ns;
FODM453R2V
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Forward Current: .025 A; Maximum Power Dissipation: .1 W; Additional Features: CMOS COMPATIBLE, UL RECOGNIZED, VDE APPROVED;
HCPL2631SM
LOGIC IC OUTPUT OPTOCOUPLER; Maximum Operating Temperature: 100 Cel; Maximum Forward Current: .05 A; Minimum Supply Voltage: 4.5 V; Minimum Operating Temperature: -40 Cel; Additional Features: CMOS COMPATIBLE, UL RECOGNIZED;
HCPL-0631-000E
Broadcom
Broadcom's HCPL-0631-000E is a 2-channel optocoupler with separate configuration. It features a max forward current of 0.015A, operating temperature up to 85°C, and isolation voltage of 3750V. Ideal for logic IC output applications requiring fast response time and high isolation levels in temperatures ranging from -40°C to 85°C.
6N139-X007T
Vishay Intertechnology
Vishay Intertechnology's 6N139-X007T optocoupler features a max forward current of 0.025A, min operating temp of -55°C, and max isolation voltage of 5300V. Ideal for applications requiring high current transfer ratio, fast response time, and surface mounting feature.
HCPL2601S
HCPL2601S by Onsemi is a single optocoupler with max. forward current of 0.05A, isolation voltage of 2500V, and response time of 75ns. Ideal for logic IC output applications due to its surface mount feature and nominal data rate of 10MBps.
HCPL-0201#500
Agilent Technologies
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Current: .005 A; Maximum Isolation Voltage: 2500 V; Minimum Operating Temperature: -40 Cel;
HCPL-2631
Qt Optoelectronics
LOGIC IC OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Additional Features: UL RECOGNIZED; Maximum Operating Temperature: 85 Cel; Maximum Forward Current: .03 A;
6N136VM
LOGIC IC OUTPUT OPTOCOUPLER; Configuration: SINGLE; Maximum On State Current: .008 A; Maximum Forward Current: .025 A; JESD-609 Code: e3; Minimum Operating Temperature: -40 Cel;
5962-8978501PC
Hewlett Packard
LOGIC IC OUTPUT OPTOCOUPLER; No. of Elements: 2; Additional Features: OPEN COLLECTOR, HIGH RELIABILITY; Maximum Forward Current: .01 A; Maximum On State Current: .04 A; Maximum Isolation Voltage: 1500 V;
TLP700(F)
Toshiba
Toshiba's TLP700(F) is a single optocoupler with max. forward current of 0.01A, isolation voltage of 5000V, and response time of 500ns. Ideal for logic IC output applications, it operates b/w -40°C to 100°C and requires a min. supply voltage of 15V up to a max. of 30V.
6N139
LOGIC IC OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Lead (Sn/Pb); Minimum Supply Voltage: 4.5 V; Maximum Operating Temperature: 70 Cel; Maximum Isolation Voltage: 2500 V; No. of Functions: 1;
HCPL-0731#500
Broadcom's HCPL-0731#500 is a 2-channel optocoupler with separate configuration. It has a max forward current of 0.02A and max isolation voltage of 3750V. Ideal for logic IC output applications, it operates b/w temperatures of 0 to 70°C and can handle a max on-state current of 0.06A.
HCPL2611M
HCPL2611M by Onsemi is a single optocoupler with a max forward current of 0.05A and an isolation voltage of 5000V. With a nominal data rate of 10MBps, it is ideal for logic IC output applications requiring fast response times. Operating b/w -40 to 100°C, this rectangular-shaped optocoupler features through-hole mounting for easy installation.
HCPL-2630-500E
Broadcom's HCPL-2630-500E is a 2-channel optocoupler with separate configuration. It has a max forward current of 0.015A and operates at temperatures ranging from -40 to 85°C. Ideal for logic IC output applications, it offers high isolation voltage of 3750V and fast response time of 100ns.
HCPL-314J
LOGIC IC OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Lead (Sn/Pb); Minimum Operating Temperature: -40 Cel; Minimum Supply Voltage: 10 V; JESD-609 Code: e0; Maximum Isolation Voltage: 3750 V;
FODM8071R2
LOGIC IC OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); JESD-609 Code: e3; Nominal Data Rate: 20 MBps; Maximum Operating Temperature: 110 Cel; Minimum Supply Voltage: 3 V;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
H11L1SR2M
H11L1SR2M by Onsemi is a single optocoupler with max. forward current of 0.06A, operating temp. range -40 to 85°C, and isolation voltage of 7500V. Ideal for logic IC output applications due to its surface mount feature, 1 MBps data rate, and hysteresis ratio of 0.75.
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Nominal Hysteresis Ratio: .75; Minimum Supply Voltage: 3 V; No. of Functions: 1;
H11L1SM
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Power Dissipation: .15 W; Maximum On State Current: .05 A; Maximum Isolation Voltage: 7500 V;
The Onsemi H11L1SM is a single optocoupler with a max forward current of 0.06A and isolation voltage of 7500V. It operates b/w -40 to 85°C, suitable for logic IC output applications at data rates up to 1MBps. With a matte tin finish and surface mount feature, it offers reliable performance in various electronic circuits.
Isocom Components
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: TIN; Maximum Forward Current: .05 A; Configuration: SINGLE; Maximum Operating Temperature: 85 Cel;
Harris Semiconductor
Optocoupler - IC Outputs; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Supply Voltage: 16 V; JESD-609 Code: e0; Maximum Operating Temperature: 100 Cel;
H11L1M
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Matte Tin (Sn); Nominal Response Time: 4000 ns; Maximum Isolation Voltage: 7500 V; Configuration: SINGLE;
Everlight Electronics
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Maximum Operating Temperature: 100 Cel; Minimum Operating Temperature: -55 Cel; Configuration: SINGLE; Maximum On State Current: .05 A;
H11L1M by Onsemi is a single optocoupler with a max forward current of 0.06 A and an isolation voltage of 7500 V. It operates b/w -40 to 85 °C, making it suitable for logic IC output applications requiring high isolation and low power dissipation. With a nominal data rate of 1 MBps, it offers reliable performance in through-hole mounting configurations.
H11L1SMT&R
H11L1SMT&R by Isocom Components is a single optocoupler with a max forward current of 0.05A and isolation voltage of 5300V. Ideal for logic IC output applications, it operates b/w -40 to 85°C, with a data rate of 1MBps.
H11L1TVM
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Matte Tin (Sn); Nominal Supply Voltage: 16 V; No. of Elements: 1; Nominal Hysteresis Ratio: .75;
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: TIN; Additional Features: UL RECOGNIZED, VDE APPROVED; Minimum Supply Voltage: 3 V; Maximum Operating Temperature: 85 Cel;
H11L1SR2VM
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: TIN; Maximum Isolation Voltage: 7500 V; Maximum Power Dissipation: .15 W; Nominal Supply Voltage: 16 V;
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); No. of Elements: 1; Configuration: SINGLE; Maximum Operating Temperature: 85 Cel;
H11L1SVM
H11L1SVM by Onsemi is a single optocoupler with a max forward current of 0.06A and isolation voltage of 7500V. It operates b/w -40 to 85°C, making it suitable for logic IC output applications requiring high voltage protection in various electronic circuits. With a data rate of 1 MBps, this surface mount device offers reliable performance in industrial settings.
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Additional Features: UL RECOGNIZED, VDE APPROVED; JESD-609 Code: e3; Minimum Supply Voltage: 3 V;
H11L1MV
Fairchild Semiconductor's H11L1MV is a single optocoupler with max. forward current of 0.06A, operating temp. range -40 to 85°C, and isolation voltage of 7500V. It is used in logic IC output applications with a data rate of 1MBps and nominal hysteresis ratio of 0.75 for reliable signal transmission.
H11L1S(TA)
H11L1S(TA) by Everlight Electronics is a single optocoupler with a max forward current of 0.06 A and isolation voltage of 5000 V. Ideal for logic IC output applications, it has a response time of 100 ns and data rate of 1 MBps. Operating temperature ranges from -55 to 100°C, making it suitable for various electronic circuits.
H11L1S(TA)-V
H11L1S(TA)-V by Everlight Electronics is a single optocoupler with max. forward current of 0.06 A and isolation voltage of 5000 V. Ideal for logic IC output applications, it operates b/w -55 to 100 °C with response time of 100 ns. Suitable for surface mounting method, it has a nominal data rate of 1 MBps.
H11L1-V
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Nominal Data Rate: 1 MBps; Packing Method: TUBE; Minimum Operating Temperature: -55 Cel; Configuration: SINGLE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved