Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: TIN; Maximum Forward Current: .05 A; Configuration: SINGLE; Maximum Operating Temperature: 85 Cel;
Median Price
$0.607
Lifecycle Status
Suppliers In-Stock
41
In-Stock Inventory
1k+
Arrow
1+ parts
$0.242
100+ parts
-
1k+ parts
10k+ parts
Adafruit Industries
$0.280
$0.266
Chip1Stop
$0.317
$0.309
Farnell
$0.630
$0.334
$0.268
$0.226
Newark
$0.694
$0.644
Mouser Electronics
$1.170
$0.556
Element14
$1.240
$0.661
$0.528
$0.430
Distrelec
$2.009
$1.627
$1.321
Verical
$0.326
$0.320
$0.218
Future Electronics
$0.215
$0.205
DigiKey
$0.627
$0.492
Master Electronics
$0.398
$0.360
$0.329
Rochester
$0.452
$0.376
$0.335
Digiode
Mobius Materials
$0.410
$0.330
Nova Conductors
$0.616
TME
$1.031
$0.577
$0.463
$0.387
Component Electronics Inc.
$1.150
$0.870
$0.750
NAC Semi
Vyrian
ComSIT Distribution GmbH
Chip Stock
IBS Electronics
$0.701
$0.504
$0.500
Cyclops Electronics Ltd
LIBRA Elektronik GmbH
Avant Electronics Limited
Bristol Electronics
Flip Electronics
Inventory MP
Diverse Electronics
Prism Electronics
Mil-Aero Solutions, Inc.
Atlantic Semiconductor
PC Components Company LLC
DF Sales Co.
Speed Components Ltd
LWI Electronics Inc
ACDS - Activité Composants Distribution Service
EMSNET
Sensible Micro Corp
Advanced Electronics
$0.033
$0.031
Semicontronic
$0.204
$0.199
$0.198
Corphita
$0.252
Corohmni
Continental Prestige Electronics
$0.451
$0.441
Argo Parts USA
$0.437
Modulus Dynamics
$0.459
$0.454
$0.440
Aztec Data Supply Inc.
$0.576
Netroflash
$0.604
Andel Nordic
$9.971
$9.572
Metaverse IC Inc.
QUARKTWIN TECHNOLOGY LTD
Perfect Parts
SupplyDigital Components
Computer Components Inc. - USA
Kulean Microsystems
TANS Electronics
A-Z Elektronik GmbH
Supply Digital
Robosynatics
$0.718
$0.704
Lucentia Tech
Authorized Procurement Solutions
Eastek
$0.937
Kepictronics
Alle Elektronik GmbH
Problanco Electronics
Glotronic Ltd.
Futuretech Components
GreenTree Electronics
iodParts Technologies Inc.
Component Stockers USA
$0.480
$0.310
UHIMA Technologies
S.R.D Solutions
Cyclops Electronics Ltd (Excess)
Akira Global LLC
Optocoupler Circuit Outputs H11L1SM attributes and parameters. Explore more Optocoupler Circuit Outputs devices from Isocom Components
Additional Features:
Configuration:
Nominal Data Rate:
Maximum Forward Current:
Nominal Hysteresis Ratio:
Maximum Isolation Voltage:
JESD-609 Code:
Mounting Feature:
No. of Elements:
No. of Functions:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Maximum Power Dissipation:
Sub-Category:
Minimum Supply Voltage:
Nominal Supply Voltage:
Terminal Finish:
H11L1SM Optoelectronics trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8541.40.80.00
SB
NSN
5980-01-538-5060, 5980015385060
NIIN
015385060
Isocom Components is a leading supplier of infrared optoelectronic devices and has been for over thirty years, specialising in Optocouplers. We offer competitive products that are drop-in replacements for all the popular Optocoupler industry standard types as well as our own branded product and custom selections. We also offer the shortest manufacturing lead times in the world for many parts and can deliver popular parts ex-stock. Why settle for lengthy lead times when we can deliver your components at a time when you need them? Isocom Components recognises its obligations to customers in respect of compliance to regulatory mandates including: RoHS (Restriction of Hazardous Substances Directive) REACh (Registration, Evaluation, Authorisation and Restriction of Chemicals) Conflict Minerals
FDN5618P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Moisture Sensitivity Level (MSL): 1;
ULN2803A
Onsemi
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;
261
New England Microwave
Other Interface ICs; No. of Terminals: 14; Package Equivalence Code: FL14(UNSPEC); Power Supplies (V): +-5,-15; Package Body Material: PLASTIC/EPOXY; Surface Mount: YES;
SS14
Promax-johnton
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Vishay Semiconductors
AT90CAN128-16AUR
Microchip Technology
AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.
2N7002
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
BAV99
Electronic Devices
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Weitron Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
General Instrument
Transys Electronics
LM317AEMP/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Qualification Status: Not Qualified; Width: 3.56 mm;
1N4148
Crimson Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Vishay Intertechnology
Vishay Intertechnology's SS14 is a Schottky rectifier diode with a max forward voltage of 0.5V and output current of 1A. Operating at up to 125°C, it has a repetitive peak reverse voltage of 40V. Ideal for surface mount applications, it suits various electronic circuits requiring efficient rectification and low forward voltage drop.
LP2950CDT-3.3G
LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.
1N4148WT
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358AN
NXP Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
SMBJ18CA
Db Lectro
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SPC TECHNOLOGY/ MULTICOMP
2N2222A
Transistor & Electronic
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
HCPL-2630-500E
Agilent Technologies
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin (Sn); Maximum Isolation Voltage: 3750 V; Minimum Operating Temperature: -40 Cel; No. of Functions: 2;
6N139M
6N139M by Onsemi is a single optocoupler with max forward current of 0.02A and min transfer ratio of 400%. Operating b/w -40 to 100°C, it has a max isolation voltage of 5000V. Ideal for logic IC output applications due to its through hole mount feature.
6N140A/883B#100
Hewlett Packard
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Configuration: SEPARATE, 4 CHANNELS WITH BUILT-IN RESISTOR; Minimum Operating Temperature: -55 Cel; Additional Features: OPEN COLLECTOR, HIGH RELIABILITY;
TLP152(E(T
Toshiba
Toshiba's TLP152(E(T optocoupler features a max forward current of 0.02A, operating temperature range from -40 to 100°C, and isolation voltage up to 3750V. Ideal for logic IC output applications due to its fast response time of 18ns and surface mounting feature.
6N137
Optek Technology
LOGIC IC OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Lead (Sn/Pb); Minimum Operating Temperature: 0 Cel; JESD-609 Code: e0; Configuration: SINGLE; Maximum Forward Current: .02 A;
LOGIC IC OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Current: .02 A; JESD-609 Code: e0; Nominal Data Rate: 10 MBps; Minimum Operating Temperature: -40 Cel;
Broadcom
Broadcom's 6N140A/883B#100 optocoupler features 4 functions, 0.01 A max forward current, and 200% min current transfer ratio. Ideal for logic IC output applications with a data rate of 0.1 MBps, it operates b/w -55 to 125 °C and offers 1500 V isolation voltage.
6N140A
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: GOLD; Minimum Current Transfer Ratio: 200 %; Configuration: COMPLEX; Maximum Operating Temperature: 125 Cel;
6N137SDVM
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Nominal Supply Voltage: 7 V; Minimum Supply Voltage: 4.5 V; Minimum Operating Temperature: -40 Cel;
HCPL2630SV
LOGIC IC OUTPUT OPTOCOUPLER; Maximum Isolation Voltage: 2500 V; Maximum On State Current: .05 A; Nominal Data Rate: 10 MBps; No. of Functions: 2; Configuration: SEPARATE, 2 CHANNELS;
HCPL-0600-060E
Optocoupler - IC Outputs; Mounting Feature: SURFACE MOUNT; Nominal Response Time: 100 ns; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 85 Cel; Nominal Supply Voltage: 5.5 V;
HCPL-2631-300E
Broadcom's HCPL-2631-300E is a 2-channel optocoupler with separate configuration. It has a max forward current of 0.015A and operates at temperatures ranging from -40 to 85°C. Ideal for logic IC output applications, it offers an isolation voltage of 3750V and data rate of 10MBps.
6N137M
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Matte Tin (Sn); Minimum Supply Voltage: 4.5 V; Minimum Operating Temperature: -40 Cel; No. of Elements: 1;
Aborn Electronics
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: TIN; Additional Features: UL APPROVED; Maximum Isolation Voltage: 5000 V; JESD-609 Code: e3;
MID400S
The Onsemi MID400S is a single optocoupler with a max forward current of 0.03A and isolation voltage of 2500V. Ideal for logic IC output applications, it operates b/w -40 to 85°C, with matte tin terminal finish and surface mounting feature.
6N136V
LOGIC IC OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Maximum Operating Temperature: 100 Cel; Maximum Isolation Voltage: 2500 V; Nominal Data Rate: 1 MBps; Configuration: SINGLE;
6N136S1(TA)
Everlight Electronics
6N136S1(TA) by Everlight Electronics is a single optocoupler circuit output with a max forward current of 0.025 A. It has a nominal response time of 30 ns and can operate in temperatures ranging from -55 to 100 °C. This optocoupler is commonly used in logic IC output applications, offering high isolation voltage of up to 5000 V and a data rate of 1 MBps.
SFH6316T
Vishay Intertechnology's SFH6316T is a single optocoupler with a max forward current of 0.025A and isolation voltage of 3000V. With a data rate of 1MBps, it is ideal for logic IC output applications in temperatures ranging from 0 to 70°C.
HCPL-3120-300E
HCPL-3120-300E by Broadcom is a COMPLEX optocoupler with max. forward current of 0.016A, operating temp. range -40 to 100°C, and isolation voltage of 3750V. Ideal for logic IC output applications due to its fast response time (100ns) and high hysteresis ratio (1.6).
HCPL-0211
LOGIC IC OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Lead (Sn/Pb); Configuration: COMPLEX; No. of Elements: 1; Additional Features: OPEN COLLECTOR, UL RECOGNIZED; Nominal Data Rate: 5 MBps;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
H11L1SR2M
H11L1SR2M by Onsemi is a single optocoupler with max. forward current of 0.06A, operating temp. range -40 to 85°C, and isolation voltage of 7500V. Ideal for logic IC output applications due to its surface mount feature, 1 MBps data rate, and hysteresis ratio of 0.75.
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Nominal Hysteresis Ratio: .75; Minimum Supply Voltage: 3 V; No. of Functions: 1;
H11L1SM
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Power Dissipation: .15 W; Maximum On State Current: .05 A; Maximum Isolation Voltage: 7500 V;
The Onsemi H11L1SM is a single optocoupler with a max forward current of 0.06A and isolation voltage of 7500V. It operates b/w -40 to 85°C, suitable for logic IC output applications at data rates up to 1MBps. With a matte tin finish and surface mount feature, it offers reliable performance in various electronic circuits.
Harris Semiconductor
Optocoupler - IC Outputs; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Supply Voltage: 16 V; JESD-609 Code: e0; Maximum Operating Temperature: 100 Cel;
H11L1M
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Matte Tin (Sn); Nominal Response Time: 4000 ns; Maximum Isolation Voltage: 7500 V; Configuration: SINGLE;
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Maximum Operating Temperature: 100 Cel; Minimum Operating Temperature: -55 Cel; Configuration: SINGLE; Maximum On State Current: .05 A;
H11L1M by Onsemi is a single optocoupler with a max forward current of 0.06 A and an isolation voltage of 7500 V. It operates b/w -40 to 85 °C, making it suitable for logic IC output applications requiring high isolation and low power dissipation. With a nominal data rate of 1 MBps, it offers reliable performance in through-hole mounting configurations.
H11L1SMT&R
Isocom Components
H11L1SMT&R by Isocom Components is a single optocoupler with a max forward current of 0.05A and isolation voltage of 5300V. Ideal for logic IC output applications, it operates b/w -40 to 85°C, with a data rate of 1MBps.
H11L1TVM
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Matte Tin (Sn); Nominal Supply Voltage: 16 V; No. of Elements: 1; Nominal Hysteresis Ratio: .75;
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: TIN; Additional Features: UL RECOGNIZED, VDE APPROVED; Minimum Supply Voltage: 3 V; Maximum Operating Temperature: 85 Cel;
H11L1SR2VM
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: TIN; Maximum Isolation Voltage: 7500 V; Maximum Power Dissipation: .15 W; Nominal Supply Voltage: 16 V;
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); No. of Elements: 1; Configuration: SINGLE; Maximum Operating Temperature: 85 Cel;
H11L1SVM
H11L1SVM by Onsemi is a single optocoupler with a max forward current of 0.06A and isolation voltage of 7500V. It operates b/w -40 to 85°C, making it suitable for logic IC output applications requiring high voltage protection in various electronic circuits. With a data rate of 1 MBps, this surface mount device offers reliable performance in industrial settings.
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Additional Features: UL RECOGNIZED, VDE APPROVED; JESD-609 Code: e3; Minimum Supply Voltage: 3 V;
H11L1MV
Fairchild Semiconductor's H11L1MV is a single optocoupler with max. forward current of 0.06A, operating temp. range -40 to 85°C, and isolation voltage of 7500V. It is used in logic IC output applications with a data rate of 1MBps and nominal hysteresis ratio of 0.75 for reliable signal transmission.
H11L1M-V
Everlight Electronics' H11L1M-V is a single optocoupler with max. forward current of 0.06A and isolation voltage of 5000V. Ideal for logic IC output applications, it operates b/w -55 to 100°C, with nominal response time of 100ns and data rate of 1MBps.
H11L1S(TA)
H11L1S(TA) by Everlight Electronics is a single optocoupler with a max forward current of 0.06 A and isolation voltage of 5000 V. Ideal for logic IC output applications, it has a response time of 100 ns and data rate of 1 MBps. Operating temperature ranges from -55 to 100°C, making it suitable for various electronic circuits.
H11L1S(TA)-V
H11L1S(TA)-V by Everlight Electronics is a single optocoupler with max. forward current of 0.06 A and isolation voltage of 5000 V. Ideal for logic IC output applications, it operates b/w -55 to 100 °C with response time of 100 ns. Suitable for surface mounting method, it has a nominal data rate of 1 MBps.
H11L1G
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: TIN; Minimum Operating Temperature: -40 Cel; Additional Features: UL RECOGNIZED; Maximum On State Current: .05 A;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved