Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
H11L1SR2M by Onsemi is a single optocoupler with max. forward current of 0.06A, operating temp. range -40 to 85°C, and isolation voltage of 7500V. Ideal for logic IC output applications due to its surface mount feature, 1 MBps data rate, and hysteresis ratio of 0.75.
Median Price
$0.442
Lifecycle Status
Suppliers In-Stock
63
In-Stock Inventory
1k+
Adafruit Industries
1+ parts
$0.275
100+ parts
$0.261
1k+ parts
10k+ parts
-
Mouser Electronics
$1.050
$0.557
$0.380
Newark
$1.100
$0.570
$0.459
DigiKey
$1.110
$0.579
$0.417
Distrelec
$2.008
$1.611
$1.313
Future Electronics
$0.225
$0.215
Avnet
Verical
$0.221
Rochester
$0.430
$0.357
$0.318
Master Electronics
$0.617
$0.353
$0.330
Arrow
$0.451
$0.427
Farnell
$0.254
Element14
$0.530
$0.479
Chip1Stop
$0.433
$0.342
RS (Exports)
$0.425
$0.401
Digiode
TEDSS.com
$0.400
Nova Conductors
$0.432
Maritex
$0.610
$0.324
$0.249
TME
$0.660
$0.384
$0.313
Component Electronics Inc.
$1.150
$0.870
$0.750
NAC Semi
$0.450
IBS Electronics
$0.358
Flip Electronics
Vyrian
Chip Stock
Component Sense
Cyclops Electronics Ltd
Electro Sonic
$0.323
ComSIT Distribution GmbH
Partservice
$0.964
$0.419
Bristol Electronics
Holdelec - ElecDif-Pro
Atlantic Semiconductor
NexGen Digital
Micros
$0.434
Connector Distribution Corp
Right Parts Inc.
Cogito LLC
Odi Ramu Company
Micros sp.j. W. Kędra i J. Lic
$1.009
$0.481
Lantek
Q Components
LIBRA Elektronik GmbH
EMSNET
Zilex Electronics Inc.
Classic Components Corporation
Magnum Semiconductors LLP
Sea View Technologies
Prism Electronics
ACDS - Activité Composants Distribution Service
Semi Source
Speed Components Ltd
Microfarads
Electronics Depot
Sunrise Surplus Inc.
BCID Electronics Ltd.
Elcom Components
A2Z Electronics, Inc.
Resion
Technoshack Inc.
PC Components Company LLC
Semtec, LLC
Modulus Dynamics
$0.182
Semicontronic
$0.234
$0.228
$0.227
Ampacity Inc.
Corphita
$0.248
Corohmni
Advanced Electronics
Aztec Data Supply Inc.
$0.316
Argo Parts USA
$0.376
$0.364
Netroflash
$0.423
Perfect Parts
Authorized Procurement Solutions
GreenTree Electronics
RC Electronics
$0.350
$0.340
Glotronic Ltd.
Eastek
$0.467
Epart123
$0.320
S.R.D Solutions
Infinite Electronics LLP (Excess)
Continental Prestige Electronics
$0.289
$0.272
Lucentia Tech
$0.587
$0.575
SupplyDigital Components
Kulean Microsystems
ChipstoGo Electronic ltd
Lixinc
Component Connect
TANS Electronics
Supply Digital
A-Z Elektronik GmbH
Problanco Electronics
Alle Elektronik GmbH
Futuretech Components
Cyclops Electronics Ltd (Excess)
iodParts Technologies Inc.
Robosynatics
Speed Components Ltd (Excess)
Legend Electronics Inc. (Excess)
Kepictronics
UHIMA Technologies
SINGLE configuration allows for a simple and straightforward setup.
Can handle a relatively high forward current, providing reliable performance.
Specifically designed for logic IC outputs, ensuring compatibility and efficient operation.
Operates at a low minimum supply voltage, suitable for various applications.
Can withstand relatively high temperatures, making it suitable for industrial environments.
Matte tin finish ensures good connectivity and corrosion resistance.
Efficient power dissipation helps in maintaining the optimal performance of the product.
Good hysteresis ratio ensures stable and reliable operation of the optocoupler circuit outputs.
Compatible with a nominal supply voltage of 16 V, making it versatile for different setups.
High isolation voltage ensures safe operation and protects connected devices from voltage spikes.
Fast data rate of 1 MBps allows for quick transmission of data signals.
Surface mount installation makes it easy to integrate into various circuit boards.
Capable of handling a high on-state current, ensuring reliable performance under load.
Optocoupler Circuit Outputs H11L1SR2M attributes and parameters. Explore more Optocoupler Circuit Outputs devices from Onsemi
Additional Features:
Configuration:
Nominal Data Rate:
Maximum Forward Current:
Nominal Hysteresis Ratio:
Maximum Isolation Voltage:
JESD-609 Code:
Mounting Feature:
No. of Elements:
No. of Functions:
Maximum On State Current:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Packing Method:
Maximum Power Dissipation:
Sub-Category:
Minimum Supply Voltage:
Nominal Supply Voltage:
Terminal Finish:
H11L1SR2M Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.80.00
SB
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
STM32F401CDY6TR
STMicroelectronics
STM32F401CDY6TR by STMicroelectronics is a 32-bit microcontroller with 393216 ROM words, 50 MHz clock frequency, and 36 I/O lines. It is used in applications requiring high-speed processing, such as industrial automation and consumer electronics.
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
BAV99WT1G
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Eic Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CSNF651
Honeywell Sensing And Control
CSNF651 by Honeywell Sensing And Control is an industrial-grade analog circuit with 3 terminals. It operates b/w -40 to 85°C, supporting supply voltages from -15V to 15V. Ideal for applications requiring a special shape rectangular package style and through-hole terminal form.
1N4148WT
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358MX
Onsemi
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
ABS10-32.768KHZ-T
Abracon's ABS10-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and wearables due to its compact size and low power consumption.
BSS138
Calogic
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Drain Current (Abs) (ID): .2 A;
2N2222A
Digitron Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BAV99
Frontier Electronics
0460-202-16141
TE Connectivity
TE Connectivity's 0460-202-16141 contact features a crimp terminal type, machined contact design, and rated AC voltage of 1500V. With a wire gauge range of 20-16 AWG, it is ideal for applications requiring a male round pin-socket contact style in assembly products.
M85049/85-08W02
Amphenol
CIRCULAR CONN ACCESSORY; Shell Sizes: 8; 9; IEC Conformity: NO; MIL-Connector Accessory Name: BAND LOCK ADAPTER; MIL Conformity: YES; DIN Conformity: NO;
BSS138LT1G
BSS138LT1G by Onsemi is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Operates b/w -55 to 150 °C with small outline package style for surface mount assembly.
Silicon Standard
LM358N
Intersil
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
FDC5614P
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; Transistor Application: SWITCHING; Maximum Drain Current (ID): 3 A;
1N4148
Won-top Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
43025-0400
Molex
The Molex 43025-0400 is a board connector with 4 contacts, 2 rows, and a mating contact pitch of 0.118". It has a body length of 0.27", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for commercial applications requiring a female connector with crimp termination and UL94V-0 flammability rating.
Taitron Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
5962-8978501ZA
Broadcom
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Minimum Current Transfer Ratio: 200 %; Configuration: COMPLEX; Maximum Forward Voltage: 1.6 V;
HCPL-2730.S
Qt Optoelectronics
HCPL-2730.S by Qt Optoelectronics is a 2-channel optocoupler with built-in resistor. It has a max forward current of 0.02A and isolation voltage of 2500V. Ideal for logic IC output applications, operating b/w -40°C to 85°C temperature range.
HCPL-3150-300E
Broadcom's HCPL-3150-300E is a COMPLEX optocoupler with 0.016A forward current, 3750V isolation voltage, and -40 to 100°C operating temperature range. Ideal for logic IC output applications requiring a min 15V supply voltage.
6N137S
Lite-on Technology
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Configuration: SINGLE; Shape: RECTANGULAR; Minimum Operating Temperature: -40 Cel; Maximum On State Current: .05 A;
6N135
Everlight Electronics
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Maximum On State Current: .025 A; Nominal Data Rate: 1 MBps; Maximum Forward Current: .025 A; Configuration: SINGLE;
ACPL-K64L-000E
Broadcom's ACPL-K64L-000E optocoupler features 2 separate channels, 10 MBps data rate, and 5000V isolation voltage. Ideal for logic IC output applications with a max operating temperature of 105°C.
FODM452R2V
The Onsemi FODM452R2V is a single optocoupler with a max forward current of 0.025A and isolation voltage of 3750V. It operates b/w -40 to 85°C, suitable for logic IC output applications at up to 1MBps data rate in surface mount configurations.
HCPL0639
HCPL0639 by Onsemi is a 2-channel optocoupler circuit output with a min supply voltage of 4.5V and max operating temperature of 85°C. It has a nominal response time of 100ns and max isolation voltage of 3750V. This device is commonly used in logic IC output applications requiring high-speed data transmission up to 10MBps.
5962-8947701PA
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Configuration: SINGLE; Additional Features: HIGH RELIABILITY;
6N139
Toshiba
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Additional Features: UL RECOGNIZED, CMOS COMPATIBLE; No. of Elements: 1; Maximum Forward Voltage: 1.7 V; Maximum Power Dissipation: .1 W;
LOC110STR
Littelfuse
LOC110STR by Littelfuse is a single linear IC output optocoupler with a max forward current of 0.01A and max isolation voltage of 3750V. It operates in temperatures ranging from -40°C to 85°C, suitable for surface mount applications in optocoupler circuit outputs.
HCPL-061N-000E
Broadcom's HCPL-061N-000E is a single optocoupler with 10 MBps data rate, 3750 V isolation voltage, and 0.05 A max on-state current. Ideal for logic IC output applications, it operates b/w -40 to 85 °C with a response time of 100 ns.
HCPL2531SD
HCPL2531SD by Onsemi is a logic IC output optocoupler with separate configuration and 2 channels. It has a max forward current of 0.025 A and operates at temperatures up to 70°C. This optocoupler is commonly used in applications requiring high isolation voltage and fast response time.
HCPL-2200-500E
Broadcom's HCPL-2200-500E is a single optocoupler with 3750V isolation voltage, 2.5 MBps data rate, and 0.025A max on-state current. Ideal for logic IC output applications, it operates b/w 0 to 85°C with a min supply voltage of 4.5V.
TLP2362(E
Toshiba TLP2362(E is a single optocoupler with max. forward current of 0.025A, ideal for logic IC outputs. Operating temp range -40 to 125°C, it offers fast response time of 35ns and high isolation voltage of 3750V. Suitable for applications requiring surface mounting feature and data rate up to 10MBps.
HCPL-0201#500
Agilent Technologies
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Current: .005 A; Maximum Isolation Voltage: 2500 V; Minimum Operating Temperature: -40 Cel;
6N136S
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Maximum Forward Current: .025 A; No. of Functions: 1; No. of Elements: 1; Additional Features: UL RECOGNIZED;
6N140A/883B#600
Hewlett Packard
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Minimum Operating Temperature: -55 Cel; Minimum Current Transfer Ratio: 300 %; Maximum On State Current: .04 A;
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Maximum Forward Current: .005 A; No. of Functions: 1; Configuration: SINGLE; Nominal Supply Voltage: 20 V;
6N136M
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Forward Current: .025 A; Minimum Operating Temperature: -40 Cel; Maximum On State Current: .008 A;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
H11L1SR2M
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Nominal Hysteresis Ratio: .75; Minimum Supply Voltage: 3 V; No. of Functions: 1;
H11L1SM
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Power Dissipation: .15 W; Maximum On State Current: .05 A; Maximum Isolation Voltage: 7500 V;
The Onsemi H11L1SM is a single optocoupler with a max forward current of 0.06A and isolation voltage of 7500V. It operates b/w -40 to 85°C, suitable for logic IC output applications at data rates up to 1MBps. With a matte tin finish and surface mount feature, it offers reliable performance in various electronic circuits.
Isocom Components
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: TIN; Maximum Forward Current: .05 A; Configuration: SINGLE; Maximum Operating Temperature: 85 Cel;
Harris Semiconductor
Optocoupler - IC Outputs; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Supply Voltage: 16 V; JESD-609 Code: e0; Maximum Operating Temperature: 100 Cel;
H11L1M
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Matte Tin (Sn); Nominal Response Time: 4000 ns; Maximum Isolation Voltage: 7500 V; Configuration: SINGLE;
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Maximum Operating Temperature: 100 Cel; Minimum Operating Temperature: -55 Cel; Configuration: SINGLE; Maximum On State Current: .05 A;
H11L1M by Onsemi is a single optocoupler with a max forward current of 0.06 A and an isolation voltage of 7500 V. It operates b/w -40 to 85 °C, making it suitable for logic IC output applications requiring high isolation and low power dissipation. With a nominal data rate of 1 MBps, it offers reliable performance in through-hole mounting configurations.
H11L1SMT&R
H11L1SMT&R by Isocom Components is a single optocoupler with a max forward current of 0.05A and isolation voltage of 5300V. Ideal for logic IC output applications, it operates b/w -40 to 85°C, with a data rate of 1MBps.
H11L1TVM
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Matte Tin (Sn); Nominal Supply Voltage: 16 V; No. of Elements: 1; Nominal Hysteresis Ratio: .75;
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: TIN; Additional Features: UL RECOGNIZED, VDE APPROVED; Minimum Supply Voltage: 3 V; Maximum Operating Temperature: 85 Cel;
H11L1SR2VM
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: TIN; Maximum Isolation Voltage: 7500 V; Maximum Power Dissipation: .15 W; Nominal Supply Voltage: 16 V;
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); No. of Elements: 1; Configuration: SINGLE; Maximum Operating Temperature: 85 Cel;
H11L1SVM
H11L1SVM by Onsemi is a single optocoupler with a max forward current of 0.06A and isolation voltage of 7500V. It operates b/w -40 to 85°C, making it suitable for logic IC output applications requiring high voltage protection in various electronic circuits. With a data rate of 1 MBps, this surface mount device offers reliable performance in industrial settings.
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Additional Features: UL RECOGNIZED, VDE APPROVED; JESD-609 Code: e3; Minimum Supply Voltage: 3 V;
H11L1MV
Fairchild Semiconductor's H11L1MV is a single optocoupler with max. forward current of 0.06A, operating temp. range -40 to 85°C, and isolation voltage of 7500V. It is used in logic IC output applications with a data rate of 1MBps and nominal hysteresis ratio of 0.75 for reliable signal transmission.
H11L1M-V
Everlight Electronics' H11L1M-V is a single optocoupler with max. forward current of 0.06A and isolation voltage of 5000V. Ideal for logic IC output applications, it operates b/w -55 to 100°C, with nominal response time of 100ns and data rate of 1MBps.
H11L1S(TA)
H11L1S(TA) by Everlight Electronics is a single optocoupler with a max forward current of 0.06 A and isolation voltage of 5000 V. Ideal for logic IC output applications, it has a response time of 100 ns and data rate of 1 MBps. Operating temperature ranges from -55 to 100°C, making it suitable for various electronic circuits.
H11L1S(TA)-V
H11L1S(TA)-V by Everlight Electronics is a single optocoupler with max. forward current of 0.06 A and isolation voltage of 5000 V. Ideal for logic IC output applications, it operates b/w -55 to 100 °C with response time of 100 ns. Suitable for surface mounting method, it has a nominal data rate of 1 MBps.
H11L1SR2M_NL
LOGIC IC OUTPUT OPTOCOUPLER; Terminal Finish: MATTE TIN; Configuration: SINGLE; Maximum On State Current: .05 A; Additional Features: UL RECOGNIZED; Maximum Forward Current: .06 A;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved