Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Optocoupler - IC Outputs; Mounting Feature: SURFACE MOUNT; Minimum Operating Temperature: -40 Cel; No. of Elements: 1; Maximum Isolation Voltage: 3750 V; Maximum Operating Temperature: 85 Cel;
Median Price
$2.430
Lifecycle Status
Suppliers In-Stock
28
In-Stock Inventory
1k+
Adafruit Industries
1+ parts
$0.613
100+ parts
$0.606
1k+ parts
-
10k+ parts
Farnell
$2.270
$1.154
$0.931
$0.838
Newark
$1.310
$1.080
$1.030
Mouser Electronics
$2.450
$1.340
$1.110
$1.060
DigiKey
$2.510
$1.395
$1.151
$1.045
Element14
$3.440
$1.740
$1.550
EBV Elektronik
Avnet
$0.881
$0.801
$0.797
Digiode
$0.582
Nova Conductors
$0.994
Mobius Materials
$1.280
TME
$2.290
$0.900
$0.860
Component Electronics Inc.
$2.310
$1.730
$1.500
Chip Stock
Vyrian
Schukat
$1.158
Component Sense
HZD GmbH
LIBRA Elektronik GmbH
EMSNET
Huijzer Components
ACDS - Activité Composants Distribution Service
Speed Components Ltd
ComSIT Distribution GmbH
ComSIT USA
Prism Electronics
Holdelec - ElecDif-Pro
Sensible Micro Corp
Aztec Data Supply Inc.
$0.221
Corohmni
$0.330
Semicontronic
$0.520
$0.507
$0.504
Decca Corp
$0.510
$0.505
Corphita
$0.552
Advanced Electronics
Argo Parts USA
Netroflash
$0.944
$0.925
Component Stockers USA
$1.920
$0.940
$0.950
$0.880
Continental Prestige Electronics
$2.320
$1.050
$0.821
Andel Nordic
$6.767
$6.497
Perfect Parts
RC Electronics
$0.970
GreenTree Electronics
QUARKTWIN TECHNOLOGY LTD
Eastek
$1.573
Speed Components Ltd (Excess)
Metaverse IC Inc.
Authorized Procurement Solutions
Glotronic Ltd.
Futuretech Components
Allen Electronics Distributors
$0.862
$0.609
Supply Digital
Robosynatics
$1.381
Lucentia Tech
Computer Components Inc. - USA
Cyclops Electronics Ltd (Excess)
Assy Fe
Optocoupler Circuit Outputs HCPL-0600-000E attributes and parameters. Explore more Optocoupler Circuit Outputs devices from Agilent Technologies
Maximum Forward Current:
Maximum Isolation Voltage:
Mounting Feature:
No. of Elements:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Power Dissipation:
Nominal Response Time:
Sub-Category:
Nominal Supply Voltage:
HCPL-0600-000E Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.80.00
SB
PCN Design/Specification - Mult Device Design Changes 10/Nov/2015 Molding Chg 08/Feb/2016
PCN Packaging - Multiple Devices Marking/Labeling 07/Aug/2013 Marking/Labeling Revision B 14/Jan/2014
Agilent supports scientists in 110 countries in cutting-edge life science research; patient diagnostics; and testing required to ensure the safety of water, food and pharmaceuticals. Our advanced instruments, software, consumables, and services enable our customers to produce the most accurate and reliable results as well as optimal scientific, economic, and operational outcomes. We play a role in advancing important research and testing, with our scientists creating some of the world's most leading-edge technology and our field engineers working side by side with customers to help them maximize productivity. We bring these solutions to a variety of markets, from pharma and diagnostics to applied materials and chemicals. Together with our customers, we’re bringing great science to life.
2N7002
Plessey Semiconductors Discrete Components Div
Other Transistors;
SMBJ18CA
Semtech
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MMSZ5245BT1G
Onsemi
MMSZ5245BT1G by Onsemi is a Zener diode with 15V nominal reference voltage, 8.5mA test current, and 16 ohm dynamic impedance. It is used in applications requiring precise voltage regulation in a compact SMD package for temperatures ranging from -55 to 150°C.
ULN2803ADWR
Texas Instruments
ULN2803ADWR by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85°C, has a max supply voltage of 3V, and is ideal for buffer or inverter-based applications requiring sink current flow direction.
LL4148
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V;
ULN2803A
Motorola
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Terminal Position: DUAL; JESD-30 Code: R-PDIP-T18;
EU2B-YS3103F
Idec
ROTARY SWITCH;
LM358N
LM358N by Texas Instruments is an operational amplifier with 2 functions, offering a max input offset voltage of 9000 uV and a nominal common mode reject ratio of 85 dB. Widely used in commercial applications, it operates at temperatures ranging from 0 to 70 °C and has a unity gain bandwidth of 1000 kHz.
2N7002-T1-E3
Vishay Intertechnology
Vishay Intertechnology's 2N7002-T1-E3 is a N-CHANNEL FET for SWITCHING applications. Features include 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. With ENHANCEMENT MODE operation, this GULL WING transistor is ideal for small outline surface mount designs up to 150°C.
Silicon Standard
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): .225 W; Maximum Drain-Source On Resistance: 7.5 ohm; Transistor Element Material: SILICON;
2N7002DWH6327XTSA1
Infineon Technologies
2N7002DWH6327XTSA1 by Infineon: N-CHANNEL FET with 60V DS Breakdown Voltage, 0.3A ID, and 3ohm RDS. Ideal for SWITCHING applications in small outline packages with GULL WING terminals.
FDD5614P
FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.
BAV99
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Semitron
IRLML6402TRPBF
IRLML6402TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 20V DS Breakdown Voltage, 22A IDM, and 0.065 ohm RDS(on). With a small outline package and matte tin finish, it operates in temperatures from -55 to 150 °C.
LM317T
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; JESD-609 Code: e0; Terminal Position: SINGLE; Adjustability: ADJUSTABLE; Maximum Load Regulation (%): 1.5 %;
STM32H753IIK6
STMicroelectronics
STM32H753IIK6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and peripherals like CAN, ETHERNET, and USB. Ideal for industrial applications requiring high-speed processing and extensive connectivity options.
Micro Commercial Components
Small Signal Field-Effect Transistors; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .34 A; Package Style (Meter): SMALL OUTLINE;
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
1N4148WT-7
Diodes Incorporated
1N4148WT-7 by Diodes Inc. is a fast recovery rectifier diode with a max reverse recovery time of 0.004 us and a max forward voltage of 1.25 V. It has a package style of small outline, making it suitable for surface mount applications where high-speed switching is required at temperatures ranging from -65 to 150 °C.
HCPL-0731-500
Agilent Technologies
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Minimum Operating Temperature: 0 Cel; Maximum Isolation Voltage: 3750 V; No. of Elements: 2;
6N137-300E
Broadcom
The Broadcom 6N137-300E is a single optocoupler with a max forward current of 0.02A and isolation voltage of 3750V. It operates b/w -40 to 85°C, has a response time of 100ns, and supports data rates up to 10MBps. Ideal for logic IC output applications requiring high-speed signal transmission in harsh environments.
6N137
Telefunken Microelectronics
Optocoupler - IC Outputs; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Current: .02 A; Maximum Isolation Voltage: 2500 V; Nominal Response Time: 50 ns;
H11L1VM
H11L1VM by Onsemi is a single optocoupler with a max forward current of 0.06A and isolation voltage of 7500V. It operates b/w -40 to 85°C, making it suitable for logic IC output applications requiring high voltage protection and data rates up to 1MBps.
HCPL-0600-560E
Optocoupler - IC Outputs; Mounting Feature: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel; Maximum Isolation Voltage: 3750 V; Minimum Operating Temperature: -40 Cel; Maximum Forward Current: .02 A;
HCPL-2731SD
Fairchild Semiconductor
LOGIC IC OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Additional Features: UL RECOGNIZED; JESD-609 Code: e3; Configuration: SEPARATE, 2 CHANNELS; Maximum Isolation Voltage: 2500 V;
ACPL-W50L-000E
Broadcom's ACPL-W50L-000E is a single optocoupler with 0.02A forward current, ideal for logic IC outputs. Operating from -40 to 105°C, it offers 5000V isolation voltage and 1MBps data rate. With surface mount feature and low power dissipation of 0.045W, it suits various applications in electronics.
6N140A/883B
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Gold (Au); Maximum Response Time: .00006 s; Maximum On State Current: .04 A; Maximum Forward Current: .01 A;
HCPL-0601-500E
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin (Sn); No. of Elements: 1; Maximum On State Current: .05 A; Maximum Operating Temperature: 85 Cel;
FOD3184SD
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); JESD-609 Code: e3; Maximum Forward Voltage: 1.8 V; Minimum Supply Voltage: 15 V;
5962-8981001XA
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Additional Features: OPEN COLLECTOR, HIGH RELIABILITY; Maximum Power Dissipation: .05 W; No. of Elements: 1; Maximum On State Current: .04 A;
HCPL3700SD
HCPL3700SD by Onsemi is a COMPLEX optocoupler with 0.05A forward current, 2V min supply voltage, and 85°C max operating temp. Ideal for logic IC output applications, it offers 2500V isolation voltage, 40000ns response time, and surface mounting feature.
TLP2745
Toshiba
Toshiba's TLP2745 is a single optocoupler with max. forward current of 0.015A, ideal for logic IC outputs. With a response time of 3ns and isolation voltage of 5000V, it operates b/w -40 to 110°C. Suitable for surface mount applications requiring fast signal transmission and high voltage isolation.
6N138SDM
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Packing Method: TR; Maximum Isolation Voltage: 5000 V; Maximum On State Current: .06 A;
HCPL2531S
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Maximum Isolation Voltage: 2500 V; No. of Functions: 2; Maximum Forward Current: .025 A; Configuration: SEPARATE, 2 CHANNELS;
5962-8947701XA
Hewlett Packard
LOGIC IC OUTPUT OPTOCOUPLER; Maximum Operating Temperature: 125 Cel; Maximum Isolation Voltage: 1500 V; Additional Features: OPEN COLLECTOR, HIGH RELIABILITY; Maximum On State Current: .04 A; Minimum Supply Voltage: 3 V;
HCPL2531SDM
LOGIC IC OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Maximum Forward Current: .025 A; Maximum On State Current: .008 A; Maximum Isolation Voltage: 5000 V; Nominal Data Rate: 1 MBps;
6N136SM
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); JESD-609 Code: e3; Additional Features: TTL COMPATIBLE, UL RECOGNIZED; Maximum Operating Temperature: 100 Cel;
TLP2368(TPR,E
Toshiba's TLP2368(TPR,E optocoupler features 3750V isolation voltage, 30ns response time, and 20MBps data rate. Ideal for logic IC output applications with a single configuration, operating b/w -40 to 125°C temperature range.
HCPL2631SDVM
LOGIC IC OUTPUT OPTOCOUPLER; Maximum Forward Current: .05 A; No. of Elements: 2; Configuration: SEPARATE, 2 CHANNELS; Maximum Isolation Voltage: 5000 V; Nominal Data Rate: 10 MBps;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
HCPL-316J-500E
Optocoupler - IC Outputs; Mounting Feature: SURFACE MOUNT; Minimum Operating Temperature: -40 Cel; Nominal Response Time: 100 ns; Maximum Operating Temperature: 100 Cel; No. of Elements: 1;
HCPL2630S
HCPL2630S by Onsemi is a 2-channel optocoupler with separate configuration. It has a max forward current of 0.03A, operating temperature range of -40 to 85°C, and isolation voltage of 2500V. Ideal for logic IC output applications requiring fast response time at 10MBps data rate.
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Additional Features: CMOS COMPATIBLE, OPEN COLLECTOR, UL RECOGNIZED; Maximum Power Dissipation: .06 W; Configuration: SEPARATE, 2 CHANNELS; Nominal Supply Voltage: 5 V;
HCPL-2630.S
Qt Optoelectronics
HCPL-2630.S by Qt Optoelectronics is a 2-channel logic IC output optocoupler with separate configuration. It features max. forward current of 0.03A, isolation voltage of 2500V, and data rate of 10MBps. Ideal for applications requiring high-speed signal transmission in environments ranging from -40°C to 85°C.
HCPL-316J-000E
Optocoupler - IC Outputs; Mounting Feature: SURFACE MOUNT; Maximum Operating Temperature: 100 Cel; Nominal Response Time: 500 ns; Nominal Supply Voltage: 30 V; Minimum Operating Temperature: -40 Cel;
HCPL-2631.SD
HCPL-2631.SD by Qt Optoelectronics is a 2-channel optocoupler with max. forward current of 0.03A and max. isolation voltage of 2500V. Ideal for logic IC output applications, it operates b/w -40°C to 85°C with a nominal data rate of 10MBps.
HCPL2631SD
HCPL2631SD by Onsemi is a logic IC output optocoupler with 2 separate channels. It has a max forward current of 0.03A and operates at temperatures ranging from -40 to 85°C. Ideal for applications requiring high isolation voltage, fast response time, and surface mounting feature.
LOGIC IC OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Nominal Data Rate: 10 MBps; Configuration: SEPARATE, 2 CHANNELS; Minimum Supply Voltage: 4.5 V; No. of Elements: 2;
HCPL2601V
HCPL2601V by Onsemi is a single optocoupler with a max forward current of 0.05A and an isolation voltage of 2500V. It operates b/w -40 to 85°C, has a response time of 75ns, and is ideal for logic IC output applications.
LOGIC IC OUTPUT OPTOCOUPLER; Maximum Forward Current: .05 A; No. of Elements: 1; Maximum Operating Temperature: 85 Cel; Additional Features: CMOS COMPATIBLE, OPEN COLLECTOR, UL RECOGNIZED, VDE APPROVED; Maximum Isolation Voltage: 2500 V;
HCPL2630SV
HCPL2630SV by Onsemi is a 2-channel optocoupler with separate configuration. It has a max forward current of 0.03A and operates at temperatures b/w -40 to 85°C. Ideal for logic IC output applications, it offers an isolation voltage of 2500V and data rate of 10MBps in a surface mount package.
LOGIC IC OUTPUT OPTOCOUPLER; Maximum Isolation Voltage: 2500 V; Maximum On State Current: .05 A; Nominal Data Rate: 10 MBps; No. of Functions: 2; Configuration: SEPARATE, 2 CHANNELS;
HCPL-0600-500E
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin (Sn); Maximum Isolation Voltage: 3750 V; Minimum Supply Voltage: 4.5 V; Maximum On State Current: .05 A;
Broadcom's HCPL-0600-500E is a single optocoupler with logic IC output. It has a max forward current of 0.02A, isolation voltage of 3750V, and response time of 100ns. Ideal for applications requiring high-speed data transmission in environments with temperatures ranging from -40 to 85°C.
HCPL-2601S
Fairchild Semiconductor's HCPL-2601S is a single optocoupler with max. forward current of 0.05A, isolation voltage of 2500V, and data rate of 10MBps. It is ideal for logic IC output applications, operating b/w -40°C to 85°C with a min. supply voltage of 4.5V.
HCPL2601S
HCPL2601S by Onsemi is a single optocoupler with max. forward current of 0.05A, isolation voltage of 2500V, and response time of 75ns. Ideal for logic IC output applications due to its surface mount feature and nominal data rate of 10MBps.
HCPL-2601.S
HCPL-2601.S by Qt Optoelectronics is a single optocoupler with a max forward current of 0.05A and an isolation voltage of 2500V. With a data rate of 10MBps, it is ideal for logic IC output applications requiring reliable signal transmission in temperatures ranging from -40°C to 85°C.
HCPL-0201-500E
Optocoupler - IC Outputs; Mounting Feature: SURFACE MOUNT; Nominal Supply Voltage: 20 V; Nominal Response Time: 300 ns; Maximum Operating Temperature: 85 Cel; Maximum Forward Current: .01 A;
Broadcom's HCPL-0201-500E is a single optocoupler with a max forward current of 0.01A and isolation voltage of 3750V. With a data rate of 5MBps, it operates b/w -40 to 85°C, making it ideal for logic IC output applications requiring high-speed signal transmission in harsh environments.
HCPL0600R2
The Onsemi HCPL0600R2 is a single optocoupler with a max forward current of 0.05A and an isolation voltage of 3750V. It operates b/w -40 to 85°C, has a response time of 50ns, and is ideal for logic IC output applications.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved