Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LOGIC IC OUTPUT OPTOCOUPLER; Maximum Operating Temperature: 70 Cel; Configuration: SINGLE; Packing Method: TUBE; Minimum Operating Temperature: 0 Cel; No. of Functions: 1;
Median Price
$0.700
Lifecycle Status
Suppliers In-Stock
22
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
$0.687
1k+ parts
$0.570
10k+ parts
$0.508
DigiKey
$0.860
Avnet
$0.247
$0.236
$0.229
Newark
Verical
$0.713
$0.635
Digiode
$0.535
Nova Conductors
$0.543
Chip Stock
VNN
Component Sense
Vyrian
Goldney Electronics S.L.
Prism Electronics
Bristol Electronics
Atlantic Semiconductor
Holdelec - ElecDif-Pro
ACDS - Activité Composants Distribution Service
Electronics Depot
EMSNET
Specialty Parts & Electronic Components, Inc. (S.P.E.C.)
ECAB
LWI Electronics Inc
Continental Prestige Electronics
$0.274
$0.269
Argo Parts USA
$0.266
Corohmni
Semicontronic
$0.479
$0.467
$0.465
Corphita
$0.507
Netroflash
$0.532
Aztec Data Supply Inc.
$0.667
Perfect Parts
Problanco Electronics
A-Z Elektronik GmbH
Kulean Microsystems
Authorized Procurement Solutions
TANS Electronics
SupplyDigital Components
Supply Digital
UHIMA Technologies
Kepictronics
iodParts Technologies Inc.
Cyclops Electronics Ltd (Excess)
Glotronic Ltd.
Assy Fe
Optocoupler Circuit Outputs 6N139S attributes and parameters. Explore more Optocoupler Circuit Outputs devices from Lite-on Technology
Additional Features:
Configuration:
Maximum Forward Current:
Maximum Isolation Voltage:
No. of Elements:
No. of Functions:
Maximum On State Current:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Packing Method:
6N139S Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.80.00
SB
Founded in 1975, LITEON embraces being “Best Partner in Opto-Electronic, Eco-Friendly and Intelligent Technologies” as its vision to focus on the development of optoelectronics and key electronic components, and strives to build up competitive edge through resource integration and optimized management. LITEON produces products that are used in a broad range of applications, such as computers, communications, consumer electronics, automotive electronics, LED lighting, cloud computing as well as healthcare. LITEON is a worldwide leading provider of optoelectronics, information technology and storage devices components.
2N2222A
Microchip Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum Operating Temperature: -65 Cel; Terminal Position: BOTTOM;
LM358AN
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
M39029/58-360
Positronic Industries
CONNECTOR ACCESSORY; MIL-Connector Accessory Name: CONTACT; DIN Conformity: NO; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354; Contact Type: CRIMP REAR RELEASE;
1N4148
Iskra Semic Capacitors Industry
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; JESD-609 Code: e0; Maximum Non Repetitive Peak Forward Current: 2 A;
FDD5614P
Onsemi
FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.
Micro Commercial Components
Small Signal Bipolar Transistors; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-609 Code: e0;
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
NUP2105LT1G
NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.
LM7805CT
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Min): 0 Cel; Technology: BIPOLAR;
LM317TG
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Minimum Input-Output Voltage Differential: 3 V; Qualification Status: Not Qualified; No. of Functions: 1;
MBR0520LT1
Motorola
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Promax-johnton
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Leshan Radio
RECTIFIER DIODE; Surface Mount: YES; Maximum Non Repetitive Peak Forward Current: 2 A; Maximum Reverse Recovery Time: .004 us; No. of Phases: 1; Maximum Operating Temperature: 175 Cel;
SMBJ18CA
Silicon Standard
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2803ADWR
Texas Instruments
ULN2803ADWR by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85°C, has a max supply voltage of 3V, and is ideal for buffer or inverter-based applications requiring sink current flow direction.
Tt Electronics Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
SMMBT3904LT1G
SMMBT3904LT1G by Onsemi is a NPN BJT with 3 terminals, 0.3W power dissipation, and 40V max collector-emitter voltage. Ideal for small outline applications requiring a transistor with hFE of at least 30, it operates up to 150°C and has a transition frequency of 300MHz.
2N7002
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Moisture Sensitivity Level (MSL): 1; Maximum Operating Temperature: 150 Cel;
NE555D
STMicroelectronics
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
6N137TVM
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Power Dissipation: .1 W; Nominal Data Rate: 10 MBps; Minimum Operating Temperature: -40 Cel;
HCPL2631SDM
LOGIC IC OUTPUT OPTOCOUPLER; Additional Features: CMOS COMPATIBLE, UL RECOGNIZED; Minimum Supply Voltage: 4.5 V; Maximum Isolation Voltage: 5000 V; Configuration: SEPARATE, 2 CHANNELS; Maximum Forward Current: .05 A;
FODM8071
The Onsemi FODM8071 is a single optocoupler with a max forward current of 0.02 A and an isolation voltage of 3750 V. With a nominal data rate of 20 MBps, it is ideal for logic IC output applications. Operating b/w -40 to 110 °C, this surface mount device has a fast response time of 55 ns.
FOD8012AR2
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; Nominal Data Rate: 1.875 MBps; Packing Method: TR; Configuration: SEPARATE, 2 CHANNELS;
ACPL-M21L-500E
Broadcom
ACPL-M21L-500E by Broadcom is a SINGLE optocoupler with 0.008A forward current, 5MBps data rate, and 3750V isolation voltage. Ideal for logic IC output applications, it operates b/w -40 to 105°C temperatures and has a response time of 250ns.
HCPL-2731-500E
Broadcom's HCPL-2731-500E is a 2-channel logic IC output optocoupler with separate configuration. It offers a min current transfer ratio of 400%, max isolation voltage of 3750V, and can handle up to 0.06A on-state current. Ideal for applications requiring high-voltage isolation and signal transmission in industrial electronics.
6N137SM
Isocom
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Packing Method: TUBE; Minimum Operating Temperature: -40 Cel; Configuration: SINGLE; No. of Functions: 1;
6N139
LOGIC IC OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Maximum Isolation Voltage: 2500 V; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; JESD-609 Code: e3;
6N136
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Nominal Response Time: 30 ns; Nominal Data Rate: 1 MBps; Shape: RECTANGULAR; Configuration: SINGLE;
ACPL-M21L-560E
ACPL-M21L-560E by Broadcom is a SINGLE optocoupler with 0.008A forward current, 2.7V min supply voltage, and 105°C max operating temp. Ideal for logic IC output applications due to its 5MBps data rate, 3750V isolation voltage, and surface mounting feature.
6N139S
Lite-on Technology
HCPL2601WV
HCPL2601WV by Onsemi is a single optocoupler with 0.05A forward current, 75ns response time, and 2500V isolation voltage. Ideal for logic IC output applications, it operates b/w -40 to 85°C temperatures with a max power dissipation of 0.085W.
6N138
LOGIC IC OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Maximum Isolation Voltage: 2500 V; Configuration: SINGLE; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel;
6N135
NXP Semiconductors
LOGIC IC OUTPUT OPTOCOUPLER; Minimum Operating Temperature: -40 Cel; Additional Features: UL RECOGNIZED, VDE APPROVED; Maximum On State Current: .01 A; Maximum Forward Current: .1 A; Maximum Operating Temperature: 100 Cel;
HCNW3120-000E
Agilent Technologies
Optocoupler - IC Outputs; Mounting Feature: THROUGH HOLE MOUNT; Maximum Forward Current: .025 A; No. of Elements: 1; Nominal Supply Voltage: 30 V; Nominal Response Time: 500 ns;
MID400SDV
The Onsemi MID400SDV is a single optocoupler with logic IC output. It has a max forward current of 0.03A and operates b/w -40°C to 85°C. With a max isolation voltage of 2500V, it is ideal for surface mount applications requiring high voltage protection in electronic circuits.
FODM452R2
The Onsemi FODM452R2 is a single optocoupler with a max forward current of 0.025A and isolation voltage of 3750V. Ideal for logic IC output applications, it operates b/w -40 to 85°C, with a min CTR of 15% and data rate of 1MBps.
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; No. of Functions: 1; Maximum On State Current: .008 A; Configuration: SINGLE; Minimum Operating Temperature: 0 Cel;
The Texas Instruments 6N138 is a single optocoupler with a max forward current of 0.02A and isolation voltage of 3000V. It operates b/w 0-70°C, has a data rate of 0.1MBps, and can handle an on-state current of 0.06A. Ideal for logic IC output applications requiring high isolation levels and reliable signal transmission at moderate speeds.
HCPL0701V
HCPL0701V by Onsemi is a single optocoupler with max. forward current of 0.02A and max. isolation voltage of 2500V. Ideal for logic IC output applications, it operates b/w -40°C to 85°C, with a max on-state current of 0.06A.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
6N137
Sharp Corporation
LOGIC IC OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Lead (Sn/Pb); No. of Functions: 1; Minimum Operating Temperature: 0 Cel; JESD-609 Code: e0; Configuration: COMPLEX;
Optek Technology
LOGIC IC OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Lead (Sn/Pb); Minimum Operating Temperature: 0 Cel; JESD-609 Code: e0; Configuration: SINGLE; Maximum Forward Current: .02 A;
Renesas Electronics
Optocoupler - IC Outputs; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Current: .02 A; Nominal Response Time: 50 ns; Minimum Operating Temperature: 0 Cel;
Telefunken Microelectronics
Optocoupler - IC Outputs; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Current: .02 A; Maximum Isolation Voltage: 2500 V; Nominal Response Time: 50 ns;
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Minimum Supply Voltage: 4.5 V; No. of Elements: 1; No. of Functions: 1;
LOGIC IC OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn) - annealed; JESD-609 Code: e3; No. of Elements: 1; Nominal Data Rate: 10 MBps; Configuration: SINGLE;
Quality Technologies
LOGIC IC OUTPUT OPTOCOUPLER; Nominal Data Rate: 10 MBps; Maximum Forward Current: .02 A; Maximum Isolation Voltage: 2500 V; No. of Elements: 1; No. of Functions: 1;
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Additional Features: CMOS COMPATIBLE, UL APPROVED, CAN ALSO OPERATE ON 5V; Maximum Isolation Voltage: 5000 V; Configuration: SINGLE; Nominal Data Rate: 15 MBps;
Vishay Intertechnology
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Matte Tin (Sn); Nominal Data Rate: 10 MBps; No. of Elements: 1; Maximum Forward Current: .015 A;
Morrihan International
Optocoupler - IC Outputs; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Supply Voltage: 5 V; JESD-609 Code: e0; No. of Elements: 1;
Qt Optoelectronics
LOGIC IC OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Lead (Sn/Pb); No. of Elements: 1; Additional Features: UL RECOGNIZED; Maximum On State Current: .05 A; Maximum Forward Current: .05 A;
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Minimum Operating Temperature: -40 Cel; No. of Elements: 1; Nominal Data Rate: 10 MBps; Minimum Supply Voltage: 4.5 V;
LOGIC IC OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Minimum Supply Voltage: 4.5 V; Minimum Operating Temperature: -40 Cel; Nominal Data Rate: 10 MBps; Maximum Forward Current: .05 A;
Aborn Electronics
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: TIN; Additional Features: UL APPROVED; Maximum Isolation Voltage: 5000 V; JESD-609 Code: e3;
6N137 by Texas Instruments is a logic IC output optocoupler with max. forward current of 0.02A and isolation voltage of 3000V. It operates b/w 0-70°C, ideal for complex circuit outputs requiring high hysteresis ratio (0.0167) and on-state current up to 0.05A.
Nec Electronics America
LOGIC IC OUTPUT OPTOCOUPLER; Minimum Operating Temperature: 0 Cel; Maximum Operating Temperature: 70 Cel; No. of Functions: 1; Maximum On State Current: .05 A; No. of Elements: 1;
Marktech Optoelectronics
Optocoupler - IC Outputs; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Current: .02 A; Maximum Power Dissipation: .085 W; Maximum Operating Temperature: 70 Cel;
General Instrument Optoelectronics
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: TIN; Minimum Supply Voltage: 4.5 V; Maximum Operating Temperature: 85 Cel; Packing Method: TUBE;
Hewlett Packard
LOGIC IC OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Current: .02 A; JESD-609 Code: e0; Nominal Data Rate: 10 MBps; Minimum Operating Temperature: -40 Cel;
Rs Components
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: TIN; No. of Elements: 1; Minimum Supply Voltage: 4.5 V; Maximum Operating Temperature: 85 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved