Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FDN304PZ by Onsemi is a P-CHANNEL FET with 20V DS breakdown voltage, ideal for switching applications. It features a max drain current of 2.4A and 0.052 ohm on-resistance, operating in enhancement mode at up to 150°C. This small outline transistor with gull wing terminals is designed for surface mount configurations.
Median Price
$0.355
Lifecycle Status
Suppliers In-Stock
24
In-Stock Inventory
1k+
Adafruit Industries
1+ parts
$0.247
100+ parts
$0.235
1k+ parts
10k+ parts
-
Arrow
$0.429
$0.160
$0.130
$0.100
Distrelec
$0.541
$0.485
$0.408
$0.375
Farnell
$0.682
$0.281
$0.196
$0.153
DigiKey
$0.960
$0.387
$0.268
Mouser Electronics
$0.337
Chip1Stop
$0.156
RS (Exports)
$0.238
Verical
Element14
$0.384
$0.291
$0.260
Master Electronics
$0.164
$0.158
$0.152
Rochester
$0.233
$0.194
$0.172
Newark
$0.300
$0.225
Digiode
$0.181
Nova Conductors
$0.257
TME
$0.880
$0.334
$0.248
Chip Stock
Flip Electronics
Vyrian
Semtec, LLC
IBS Electronics
$0.287
$0.264
$0.244
NAC Semi
$0.184
Sensible Micro Corp
Extreme Components
Ampacity Inc.
$0.124
Semicontronic
$0.133
$0.129
Corohmni
$0.146
Corphita
Advanced Electronics
Argo Parts USA
$0.255
Component Stockers USA
$0.600
$0.310
$0.230
$0.150
Aztec Data Supply Inc.
$1.785
Kepictronics
Perfect Parts
Metaverse IC Inc.
RC Electronics
$0.240
Allen Electronics Distributors
Continental Prestige Electronics
$0.331
$0.201
Lixinc
SupplyDigital Components
Authorized Procurement Solutions
QUARKTWIN TECHNOLOGY LTD
Infinite Electronics LLP (Excess)
Futuretech Components
TANS Electronics
Problanco Electronics
S.R.D Solutions
Kulean Microsystems
Eastek
GreenTree Electronics
Supply Digital
Robosynatics
$0.683
Lucentia Tech
Formix International (Excess)
CPlus Electronics
UHIMA Technologies
Netroflash
$0.252
$0.239
Provides good thermal and electrical insulation, ensuring reliability and durability.
Suitable for applications requiring P-channel transistors, providing flexibility in circuit design.
Built-in diode simplifies circuit design, reducing component count and cost.
Ideal for switching applications due to fast switching speeds and low power dissipation.
Suitable for automated assembly processes, saving time and effort in production.
Can handle higher voltages, enhancing the versatility of the transistor.
Compact shape saves space on PCB and allows for dense packaging.
Easy to solder onto PCB, ensuring secure connections and reliability.
Enhancement mode transistors are easier to interface with digital circuits, increasing compatibility.
Higher drain current capability allows for handling higher power loads.
Simplifies circuit connections and reduces complexity in layout.
Low power dissipation helps in reducing heat generation and improving efficiency.
Compact package size is suitable for space-constrained applications.
MOSFET technology offers high switching speeds and low power consumption.
Can withstand higher temperatures, making it suitable for a variety of environments.
Silicon transistors offer good performance and reliability in various applications.
Matte tin finish provides good solderability and corrosion resistance.
Low on-resistance minimizes power losses and ensures efficient operation.
Dual terminal position offers flexibility in PCB layout and connection options.
Small Signal Field Effect Transistors (FET) FDN304PZ attributes and parameters. Explore more Small Signal Field Effect Transistors (FET) devices from Onsemi
Configuration:
Minimum DS Breakdown Voltage:
Maximum Drain Current (Abs) (ID):
Maximum Drain Current (ID):
Maximum Drain-Source On Resistance:
Field Effect Transistor Technology:
JESD-30 Code:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
No. of Elements:
No. of Terminals:
Operating Mode:
Maximum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Polarity or Channel Type:
Maximum Power Dissipation (Abs):
Qualification:
Sub-Category:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Transistor Application:
Transistor Element Material:
FDN304PZ Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
1552200168
Molex
WIRE AND CABLE;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
KSZ9031RNXIA
Microchip Technology
KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.
2N2222A
Asi Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
06035C103KAT2A
KYOCERA AVX
06035C103KAT2A by KYOCERA AVX is a SMT ceramic capacitor with 0.01uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for applications requiring compact surface mount capacitors with stable performance in a wide temperature range.
ULN2803ADWR
Texas Instruments
ULN2803ADWR by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85°C, has a max supply voltage of 3V, and is ideal for buffer or inverter-based applications requiring sink current flow direction.
ULN2803A
ULN2803A by Texas Instruments is a peripheral driver with 8 functions. It has a max supply voltage of 3V and can operate in temperatures ranging from -40 to 85°C. This IC is commonly used as a buffer or inverter based peripheral driver for various applications.
Raytheon Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Minimum DC Current Gain (hFE): 100; Maximum Turn On Time (ton): 35 ns;
2N7002
Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain Current (ID): .115 A; Operating Mode: ENHANCEMENT MODE;
ULN2003ADR
ULN2003ADR by Texas Instruments is a NPN BJT with 7 elements, max IC of 0.5A, and VCEsat of 1.6V. Ideal for switching applications in small outline packages with Gull Wing terminals.
LM107H
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;
M39029/56-351
Itt Cannon
CONNECTOR ACCESSORY; MIL Conformity: YES; Terminal Type: WIRE; IEC Conformity: NO; Alternate Contact Sources: ITT CANNON; Associated Military - Specifications: MIL-C-38999;
LM358N
Motorola
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Sinyork
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Operating Temperature: 85 Cel; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Operating Mode: ENHANCEMENT MODE;
DS18B20Z+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Body Width: 3.9 inch; Maximum Supply Voltage: 5.5 V;
BAV99
Weitronic Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Transys Electronics
SSL-LXA228SRC-TR11
Lumex
SSL-LXA228SRC-TR11 by Lumex is a 1.9mm SINGLE COLOR LED with peak wavelength of 660nm and max forward current of 0.03A. Ideal for applications requiring SUPER RED light emission, such as indicator lights in electronic devices due to its clear lens and surface mounting feature.
LM2931AZ-5.0RPG
Onsemi
LM2931AZ-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage and 0.1A max output current. It features a low dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature range from -40 to 125°C. The package style is cylindrical with matte tin terminal finish, ideal for various electronic devices needing precise voltage regulation.
1N4148
General Diode
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Terminal Finish: Tin/Lead (Sn/Pb); No. of Elements: 1;
BSS123W
Yangzhou Yangjie Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Terminal Position: DUAL; Package Shape: RECTANGULAR;
SI4816BDY-T1-E3
Vishay Intertechnology
SI4816BDY-T1-E3 by Vishay Intertechnology is a N-CHANNEL FET with 2 SERIES CONNECTED elements. It has a Max Drain Current of 5.8A and Min DS Breakdown Voltage of 30V. Ideal for applications requiring high drain current in small outline packages, operating b/w -55 to 150°C.
SI2302CDS-T1-E3
Vishay Intertechnology's SI2302CDS-T1-E3 is a N-CHANNEL FET with 20V DS Breakdown Voltage and 2.6A Drain Current. Ideal for SWITCHING applications, it features a built-in DIODE, 0.057 ohm On Resistance, and operates in ENHANCEMENT MODE at up to 150°C.
BSS138BK,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Peak Reflow Temperature (C): 260; Additional Features: LOGIC LEVEL COMPATIBLE; Maximum Operating Temperature: 150 Cel;
BSS138BKS,115
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): .32 A; Package Shape: RECTANGULAR; Additional Features: LOGIC LEVEL COMPATIBLE;
NDS331N
National Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Terminal Finish: Tin/Lead (Sn/Pb); Transistor Application: SWITCHING;
BSS123WQ-7-F
Diodes Incorporated
Diodes Inc. BSS123WQ-7-F is a N-channel FET with 100V DS breakdown voltage, 0.17A max drain current, and 6 ohm max on resistance. Ideal for switching applications in small outline packages, it operates from -55 to 150°C with matte tin finish and AEC-Q101 standard compliance.
MMBF170LT1
MMBF170LT1 by Onsemi is a N-CHANNEL FET with 60V DS breakdown voltage, 0.5A max drain current, and 5 ohm max on resistance. Ideal for switching applications, it operates in enhancement mode with a max power dissipation of 0.225W. This small outline transistor has a peak reflow temp of 235°C and can withstand temperatures from -55 to 150°C.
BSS138
Micro Commercial Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Position: DUAL;
2N7002KW
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; JESD-609 Code: e3; Qualification: Not Qualified;
SN7002WH6327XTSA1
Infineon Technologies
Infineon Technologies' SN7002WH6327XTSA1 is a small signal N-channel FET with a min DS breakdown voltage of 60V. It features a single configuration with built-in diode and operates in enhancement mode. This surface mount transistor, made of silicon, has a max drain current of 0.23A and a max drain-source on resistance of 5 ohm. It is commonly used in automotive applications due to its AEC-Q101 reference standard and moisture sensitivity level of 1.
NTGS5120PT1G
NTGS5120PT1G by Onsemi is a P-CHANNEL FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features a single configuration with built-in diode, GULL WING terminals, and operates in ENHANCEMENT MODE. With a max ID of 2.5A and 0.111 ohm RDS(on), it offers high performance in a small outline package style.
FDN335N
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Operating Mode: ENHANCEMENT MODE; Maximum Drain-Source On Resistance: .07 ohm;
BSS315PH6327XTSA1
BSS315PH6327XTSA1 by Infineon is a P-CHANNEL FET with 30V DS Breakdown Voltage, 1.5A ID, and 0.15 ohm RDS(on). It is used in small outline applications requiring a single configuration with built-in diode for enhancement mode operation.
IRLML6402TRPBF-1
International Rectifier
P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; No. of Elements: 1; Maximum Drain Current (Abs) (ID): 4.3 A;
BSS83PL6327XT
BSS83PL6327XT by Infineon Technologies is a P-CHANNEL FET with 60V DS breakdown voltage and 0.33A max drain current. It is used in enhancement mode applications, featuring a built-in diode and 2 ohm max on resistance for efficient performance in small outline packages.
BSS84P-E6327
BSS84P-E6327 by Infineon Technologies is a P-CHANNEL FET with 60V DS breakdown voltage, 0.17A max drain current, and 8 ohm max on resistance. Ideal for switching applications, it features a built-in diode in a small outline package suitable for surface mount technology.
BC548B
Tt Electronics Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 150 Cel; No. of Elements: 1;
ZXM61P03FTA
Zetex Plc
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .806 W; No. of Terminals: 3; JESD-609 Code: e3;
FDN352AP
FDN352AP by Onsemi is a P-CHANNEL FET with 30V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max Drain Current of 1.3A, 0.18 ohm Drain-Source Resistance, and operates in ENHANCEMENT MODE. This small outline transistor has a max Power Dissipation of 0.5W and can withstand temperatures up to 150°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FDN306P
FDN306P by Onsemi is a P-CHANNEL FET with 12V DS Breakdown Voltage, ideal for SWITCHING applications. It features SINGLE configuration with BUILT-IN DIODE and GULL WING terminals. Operating in ENHANCEMENT MODE, it has a max ID of 2.6A and 0.04 ohm RDS(on), suitable for small outline packages at temperatures ranging from -55 to 150°C.
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Maximum Drain Current (Abs) (ID): 2.6 A; Operating Mode: ENHANCEMENT MODE;
FDN360P
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; JESD-609 Code: e3; Operating Mode: ENHANCEMENT MODE;
FDN360P by Onsemi is a P-CHANNEL FET with 30V DS breakdown voltage and 0.08 ohm max RDS(on). Ideal for switching applications, it features a single configuration with built-in diode and operates in enhancement mode. With 2A max drain current, this MOSFET has a small outline package style suitable for surface mount designs.
FDN337N
Onsemi's FDN337N is a N-CHANNEL FET with 30V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max ID of 2.2A, 0.065 ohm Drain-Source On Resistance, and operates in ENHANCEMENT MODE. The PLASTIC/EPOXY package with GULL WING terminals can handle up to 150°C temperature, making it suitable for various electronic devices.
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Moisture Sensitivity Level (MSL): 1; Transistor Application: SWITCHING;
FDN340P
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Minimum DS Breakdown Voltage: 20 V; Maximum Operating Temperature: 150 Cel;
FDN340P by Onsemi is a P-CHANNEL FET with 20V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max Drain Current of 2A, operating in ENHANCEMENT MODE at temperatures ranging from -55 to 150 °C. The package is a SMALL OUTLINE with GULL WING terminals and METAL-OXIDE SEMICONDUCTOR technology.
FDN304P
FDN304P by Onsemi is a P-CHANNEL FET with 20V DS breakdown voltage, ideal for switching applications. It features a max drain current of 2.4A and 0.052ohm on-resistance, operating in enhancement mode at up to 150°C. With a small outline package style and matte tin finish, it offers efficient performance in compact designs.
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Terminal Finish: MATTE TIN; Maximum Operating Temperature: 150 Cel;
FDN335N by Onsemi is a N-CHANNEL FET with 20V DS Breakdown Voltage, 1.7A Drain Current, and 0.07 ohm On Resistance. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max temp of 150°C. This SMALL OUTLINE transistor has GULL WING terminals and matte tin finish for surface mount assembly.
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Package Style (Meter): SMALL OUTLINE; No. of Elements: 1;
FDN337N_NL
Fairchild Semiconductor's FDN337N_NL is a N-CHANNEL FET for SWITCHING applications. It has a 30V DS Breakdown Voltage, 2A Drain Current, and 0.065 ohm On Resistance. With ENHANCEMENT MODE operation, it comes in a SMALL OUTLINE package with GULL WING terminals.
FDN338P
FDN338P by Onsemi is a P-CHANNEL FET with 20V DS breakdown voltage, ideal for switching applications. It features a max drain current of 1.6A and 0.115 ohm on-resistance, operating in enhancement mode at up to 150°C. This small outline transistor with GULL WING terminals is designed for high power dissipation (0.5W) in surface mount configurations.
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Package Style (Meter): SMALL OUTLINE; Moisture Sensitivity Level (MSL): 1;
FDN358P
FDN358P by Onsemi is a P-CHANNEL FET with 30V DS breakdown voltage and 1.5A max drain current. Ideal for switching applications, it features a built-in diode, operates in enhancement mode, and has a 0.125 ohm max on-resistance. The small outline package with gull wing terminals can withstand up to 260°C peak reflow temperature.
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Maximum Drain Current (Abs) (ID): 1.5 A; Maximum Time At Peak Reflow Temperature (s): 30;
FDN360P_NL
Fairchild Semiconductor's FDN360P_NL is a P-CHANNEL FET with 30V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max ID of 2A, 0.08 ohm RDS(on), and operates in ENHANCEMENT MODE. The transistor comes in a PLASTIC/EPOXY package with GULL WING terminals and can handle up to 150°C operating temperature.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved