Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Onsemi's FDN337N is a N-CHANNEL FET with 30V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max ID of 2.2A, 0.065 ohm Drain-Source On Resistance, and operates in ENHANCEMENT MODE. The PLASTIC/EPOXY package with GULL WING terminals can handle up to 150°C temperature, making it suitable for various electronic devices.
Median Price
$0.242
Lifecycle Status
Suppliers In-Stock
72
In-Stock Inventory
1k+
Rochester
1+ parts
$0.150
100+ parts
1k+ parts
$0.140
10k+ parts
-
Distrelec
$0.750
$0.452
$0.353
DigiKey
$0.900
$0.360
$0.248
$0.183
Mouser Electronics
$0.361
$0.249
Adafruit Industries
$1.254
$1.191
Future Electronics
$0.099
Avnet
EBV Elektronik
Verical
$0.067
Arrow
Master Electronics
$0.296
$0.180
$0.162
Newark
$0.188
Element14
$0.508
$0.350
$0.343
Farnell
$0.133
Flip Electronics (Authorized)
Chip1Stop
$0.303
$0.192
RS (Exports)
$0.172
$0.164
Digiode
$0.142
Greenchips
$0.149
$0.135
$0.122
EXC GmbH
Nova Conductors
$0.202
Component Electronics Inc.
$0.380
$0.290
$0.250
IBS Electronics
$0.582
$0.477
$0.101
TME
$0.610
$0.212
$0.182
Maritex
$0.651
$0.160
$0.113
$0.096
Component Sense
Vyrian
Chip Stock
Cyclops Electronics Ltd
Electro Sonic
$0.165
Diverse Electronics
Goldney Electronics S.L.
Flip Electronics
Kruse Electronics AG
Kruse
GLYN GmbH & Co. KG
Bristol Electronics
Atlantic Semiconductor
ACDS - Activité Composants Distribution Service
Carlin Systems, Inc.
Huijzer Components
NexGen Digital
Classic Components Corporation
Sensible Micro Corp
Sunrise Surplus Inc.
Semtec, LLC
Electronics Depot
Sinequanon
Ashlea Components Ltd
ComSIT Distribution GmbH
ComSIT USA
NAC Semi
$0.300
$0.190
QIE Inc.
Bas Electronics GmbH & Co. KG
Martec Srl
LIBRA Elektronik GmbH
Microfarads
Pegasus Components GmbH
Q Components
Prism Electronics
SPM Sales
ECAB
Mil-Aero Solutions, Inc.
Speed Components Ltd
GSS - Global Semi Support
Semi Source
Odi Ramu Company
LWI Electronics Inc
Specialty Parts & Electronic Components, Inc. (S.P.E.C.)
Sea View Technologies
Avant Electronics Limited
LittleDiode
Ampacity Inc.
$0.055
Semicontronic
$0.054
$0.053
Corphita
Argo Parts USA
$0.189
Aranea Global
$0.198
Component Stockers USA
$0.480
$0.220
Aztec Data Supply Inc.
$0.925
Advanced Electronics
Modulus Dynamics
$1.683
Corohmni
$1.954
Perfect Parts
Continental Prestige Electronics
$0.085
Eastek
RC Electronics
$0.170
ChipstoGo Electronic ltd
Authorized Procurement Solutions
GreenTree Electronics
iodParts Technologies Inc.
Futuretech Components
Infinite Electronics LLP (Excess)
Robosynatics
$0.493
$0.483
Lucentia Tech
Cyclops Electronics Ltd (Excess)
Kepictronics
Kulean Microsystems
Assy Fe
Lixinc
Computer Components Inc. - USA
Glotronic Ltd.
XScomponents
SupplyDigital Components
Problanco Electronics
Supply Digital
A-Z Elektronik GmbH
TANS Electronics
Alle Elektronik GmbH
Formix International (Excess)
S.R.D Solutions
UHIMA Technologies
The use of plastic/epoxy material makes the transistor lightweight and durable, ideal for portable devices.
N-channel transistors typically have higher mobility and faster switching speeds compared to P-channel transistors, making them suitable for high-performance applications.
The built-in diode allows for efficient current flow and protection against reverse polarity, enhancing the reliability of the transistor.
Designed specifically for switching applications, ensuring fast response times and efficient operation.
Surface mount capability simplifies the assembly process and allows for compact designs in electronics.
The high breakdown voltage provides a margin of safety and reliability in various circuit designs.
The high maximum drain current allows for handling higher power levels, making it suitable for a wide range of applications.
Efficient power dissipation capability ensures the transistor can operate effectively without overheating.
The high maximum operating temperature allows the transistor to withstand harsh environmental conditions and maintain performance.
Low on-resistance results in minimal power loss and improved efficiency in the circuit.
Small Signal Field Effect Transistors (FET) FDN337N attributes and parameters. Explore more Small Signal Field Effect Transistors (FET) devices from Onsemi
Additional Features:
Configuration:
Minimum DS Breakdown Voltage:
Maximum Drain Current (Abs) (ID):
Maximum Drain Current (ID):
Maximum Drain-Source On Resistance:
Field Effect Transistor Technology:
JESD-30 Code:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
No. of Elements:
No. of Terminals:
Operating Mode:
Maximum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Polarity or Channel Type:
Maximum Power Dissipation (Abs):
Qualification:
Sub-Category:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Transistor Application:
Transistor Element Material:
FDN337N Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
NSN
5961-01-518-9376, 5961015189376
NIIN
015189376
PCN Design/Specification - Marking Lay-out Implementation 07/Oct/2022 Marking Lay-out Implementation 15/Nov/2021
PCN Assembly/Origin - SSOT3 Assembly/Test Chg 7/Jul/2020
PCN Packaging - Binary Year Code Marking 15/Jan/2014 Mult Devices 24/Oct/2017
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
2N7002DWH6327XTSA1
Infineon Technologies
2N7002DWH6327XTSA1 by Infineon: N-CHANNEL FET with 60V DS Breakdown Voltage, 0.3A ID, and 3ohm RDS. Ideal for SWITCHING applications in small outline packages with GULL WING terminals.
2N2222A
Crimson Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148
Rectron
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
FDV304P
Onsemi
The Onsemi FDV304P is a P-CHANNEL FET with 25V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max Drain Current of 0.46A and an Operating Temperature range of -55 to 150 °C. The transistor comes in a PLASTIC/EPOXY package with GULL WING terminals, suitable for surface mount configurations.
DS18B20Z+T&R
Analog Devices
DS18B20Z+T&R by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. The sensor comes in a plastic package suitable for surface mount applications, with a max supply voltage of 5.5V and min of 3V.
1N4148WS
Rugao Dachang Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CN
Texas Instruments
LM555CN by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V. It operates b/w 0°C to 70°C, making it suitable for commercial applications. This rectangular package IC has dual terminals and uses bipolar technology for pulse generation in various electronic circuits.
2N7002
Weitron Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Terminal Finish: TIN LEAD; Maximum Operating Temperature: 150 Cel;
SMBJ18CA
Brightking
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Zowie Technology
FDLL4148
National Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
OHN3140U
Tt Electronics Plc
OHN3140U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 2mT. It features an output range of 25mA and operates b/w -20 to 85°C. Ideal for applications requiring precise detection and measurement of magnetic fields in various industries.
ERJU06F10R0V
Panasonic
ERJU06F10R0V by Panasonic is an 0805 size SMT fixed resistor with a resistance of 10 ohm and 1% tolerance. It operates b/w -55 to 155 °C, suitable for AEC-Q200 standards in automotive applications due to its high temperature coefficient of 100 ppm/°C. With a max operating voltage of 150 V and power dissipation of 0.125 W, it is ideal for surface mounting type.
BSS138BK,215
NXP Semiconductors
NXP Semiconductors' BSS138BK,215 is a N-CHANNEL FET with 0.36A max drain current and 0.42W power dissipation. Ideal for applications requiring single configuration and surface mount technology, such as enhancement mode operation in temperatures up to 150°C.
SS14
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MBR0520LT1
MBR0520LT1 by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring low power consumption in compact electronic devices. This single-configured diode is surface mountable and has a max repetitive peak reverse voltage of 20V, ideal for small outline package designs.
Taiwan Semiconductor
DS18B20U+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: SQUARE; Housing: PLASTIC; Minimum Supply Voltage: 3 V;
BSS123LT1G
BSS123LT1G by Onsemi is a N-CHANNEL FET with 100V DS breakdown voltage, 0.17A drain current, and 6 ohm on resistance. Ideal for switching applications, it operates in enhancement mode with a max power dissipation of 0.225W. It comes in a small outline package with gull wing terminals and can withstand temperatures from -55 to 150°C.
Philips Components
SI2365EDS-T1-GE3
Vishay Intertechnology
SI2365EDS-T1-GE3 by Vishay Intertechnology is a P-CHANNEL FET for SWITCHING applications. It features 20V DS Breakdown Voltage, 5.9A Drain Current, and 0.041 ohm On Resistance. With ENHANCEMENT MODE operation and GULL WING terminals, it operates b/w -55 to 150 °C for various electronic designs.
BSS138W-G
Comchip Technology
Comchip Technology's BSS138W-G is a N-CHANNEL FET with 50V DS Breakdown Voltage, ideal for SWITCHING applications. It features SINGLE configuration with BUILT-IN DIODE and GULL WING terminals. Operating in ENHANCEMENT MODE, it has 0.2W power dissipation and -55 to 150 °C temperature range.
NTR4171PT1G
NTR4171PT1G by Onsemi is a P-CHANNEL FET with 30V DS breakdown voltage, 2.2A max drain current, and 0.075 ohm max on resistance. Ideal for switching applications, it operates in enhancement mode with a max power dissipation of 1.25W at 150°C.
2N7002PS,125
Nexperia
Nexperia's 2N7002PS,125 is a N-CHANNEL FET for SWITCHING applications. With a 60V DS Breakdown Voltage and 0.32A Drain Current, it operates in ENHANCEMENT MODE. This PLASTIC/EPOXY transistor has GULL WING terminals and withstands -55 to 150 °C temperatures.
BSS84
BSS84 by Onsemi is a P-CHANNEL FET with 50V DS breakdown voltage and 0.13A max drain current. Ideal for switching applications, it features a single configuration with built-in diode in a small outline package. Operating in enhancement mode, it has a max power dissipation of 0.25W and can withstand temperatures from -55 to 150°C.
BSS138BKW,115
NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.
Zetex Plc
P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .25 W; Transistor Application: SWITCHING; Operating Mode: ENHANCEMENT MODE;
PMV65XP,215
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: .076 ohm; No. of Elements: 1; Moisture Sensitivity Level (MSL): 1;
FDS4675_F085
Fairchild Semiconductor
FDS4675_F085 by Fairchild Semiconductor is a P-CHANNEL FET for SWITCHING applications. Features include 40V DS Breakdown Voltage, 11A Drain Current, and 0.013 ohm On Resistance. With ENHANCEMENT MODE operation, it has a max temp of 175°C and comes in an 8-terminal GULL WING package.
BSS138LT1
Motorola
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Maximum Operating Temperature: 150 Cel; Maximum Drain Current (ID): .2 A;
NDC7001C
N-CHANNEL AND P-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .96 W; JESD-30 Code: R-PDSO-G6; Maximum Drain Current (Abs) (ID): .51 A;
NDC7002N
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .96 W; Package Body Material: PLASTIC/EPOXY; Operating Mode: ENHANCEMENT MODE;
Bytesonic Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Position: DUAL; Minimum Operating Temperature: -55 Cel;
FDS9431A
The Onsemi FDS9431A is a P-CHANNEL FET with 20V DS Breakdown Voltage, 3.5A Drain Current, and 0.22 ohm On Resistance. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max power dissipation of 2.5W at 150°C.
Onsemi's BSS138LT1 is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE at -55 to 150 °C temperature range. Its GULL WING terminals and SMALL OUTLINE package make it suitable for surface mount designs.
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 260; Package Shape: RECTANGULAR;
FDC3601N
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .7 W; Maximum Drain-Source On Resistance: .5 ohm; Package Shape: RECTANGULAR;
ZVP1320FTA
P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Minimum DS Breakdown Voltage: 200 V; Maximum Time At Peak Reflow Temperature (s): 40; Terminal Position: DUAL;
Continental Device India
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .25 W; JEDEC-95 Code: TO-236AB; Terminal Finish: MATTE TIN;
2N7000
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): .4 W; Minimum DS Breakdown Voltage: 60 V; No. of Elements: 1;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FDN306P
FDN306P by Onsemi is a P-CHANNEL FET with 12V DS Breakdown Voltage, ideal for SWITCHING applications. It features SINGLE configuration with BUILT-IN DIODE and GULL WING terminals. Operating in ENHANCEMENT MODE, it has a max ID of 2.6A and 0.04 ohm RDS(on), suitable for small outline packages at temperatures ranging from -55 to 150°C.
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Maximum Drain Current (Abs) (ID): 2.6 A; Operating Mode: ENHANCEMENT MODE;
FDN360P
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; JESD-609 Code: e3; Operating Mode: ENHANCEMENT MODE;
FDN360P by Onsemi is a P-CHANNEL FET with 30V DS breakdown voltage and 0.08 ohm max RDS(on). Ideal for switching applications, it features a single configuration with built-in diode and operates in enhancement mode. With 2A max drain current, this MOSFET has a small outline package style suitable for surface mount designs.
FDN337N
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Moisture Sensitivity Level (MSL): 1; Transistor Application: SWITCHING;
FDN340P
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Minimum DS Breakdown Voltage: 20 V; Maximum Operating Temperature: 150 Cel;
FDN340P by Onsemi is a P-CHANNEL FET with 20V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max Drain Current of 2A, operating in ENHANCEMENT MODE at temperatures ranging from -55 to 150 °C. The package is a SMALL OUTLINE with GULL WING terminals and METAL-OXIDE SEMICONDUCTOR technology.
FDN304P
FDN304P by Onsemi is a P-CHANNEL FET with 20V DS breakdown voltage, ideal for switching applications. It features a max drain current of 2.4A and 0.052ohm on-resistance, operating in enhancement mode at up to 150°C. With a small outline package style and matte tin finish, it offers efficient performance in compact designs.
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Terminal Finish: MATTE TIN; Maximum Operating Temperature: 150 Cel;
FDN335N
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Operating Mode: ENHANCEMENT MODE; Maximum Drain-Source On Resistance: .07 ohm;
FDN335N by Onsemi is a N-CHANNEL FET with 20V DS Breakdown Voltage, 1.7A Drain Current, and 0.07 ohm On Resistance. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max temp of 150°C. This SMALL OUTLINE transistor has GULL WING terminals and matte tin finish for surface mount assembly.
FDN352AP
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Package Style (Meter): SMALL OUTLINE; No. of Elements: 1;
FDN352AP by Onsemi is a P-CHANNEL FET with 30V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max Drain Current of 1.3A, 0.18 ohm Drain-Source Resistance, and operates in ENHANCEMENT MODE. This small outline transistor has a max Power Dissipation of 0.5W and can withstand temperatures up to 150°C.
FDN337N_NL
Fairchild Semiconductor's FDN337N_NL is a N-CHANNEL FET for SWITCHING applications. It has a 30V DS Breakdown Voltage, 2A Drain Current, and 0.065 ohm On Resistance. With ENHANCEMENT MODE operation, it comes in a SMALL OUTLINE package with GULL WING terminals.
FDN338P
FDN338P by Onsemi is a P-CHANNEL FET with 20V DS breakdown voltage, ideal for switching applications. It features a max drain current of 1.6A and 0.115 ohm on-resistance, operating in enhancement mode at up to 150°C. This small outline transistor with GULL WING terminals is designed for high power dissipation (0.5W) in surface mount configurations.
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Package Style (Meter): SMALL OUTLINE; Moisture Sensitivity Level (MSL): 1;
FDN358P
FDN358P by Onsemi is a P-CHANNEL FET with 30V DS breakdown voltage and 1.5A max drain current. Ideal for switching applications, it features a built-in diode, operates in enhancement mode, and has a 0.125 ohm max on-resistance. The small outline package with gull wing terminals can withstand up to 260°C peak reflow temperature.
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Maximum Drain Current (Abs) (ID): 1.5 A; Maximum Time At Peak Reflow Temperature (s): 30;
FDN360P_NL
Fairchild Semiconductor's FDN360P_NL is a P-CHANNEL FET with 30V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max ID of 2A, 0.08 ohm RDS(on), and operates in ENHANCEMENT MODE. The transistor comes in a PLASTIC/EPOXY package with GULL WING terminals and can handle up to 150°C operating temperature.
FDN337ND87Z
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; JESD-30 Code: R-PDSO-G3;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved