Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FCPF400N80ZL1-F154 by Onsemi is a N-CHANNEL Power FET with 800V DS Breakdown Voltage. It has a max IDM of 33A and EAS of 339mJ, suitable for SWITCHING applications. Operating in ENHANCEMENT MODE, it offers 0.4 ohm RDS(on), -55 to 150 °C temperature range, and fast ton of 84ns/toff of 127ns.
Median Price
$5.080
Lifecycle Status
Suppliers In-Stock
11
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
100+ parts
$2.420
1k+ parts
$2.250
10k+ parts
-
DigiKey
$2.414
$2.002
Chip1Stop
$11.100
$4.780
$3.500
Rochester
$1.950
$1.740
$1.640
Verical
$2.175
$2.050
Flip Electronics (Authorized)
Digiode
$1.862
Chip Stock
Vyrian
Flip Electronics
DigiKey Marketplace
Corphita
$1.764
Corohmni
$1.960
AZTECH Wire
$4.140
$3.980
$3.900
$3.820
Native Components
$5.838
QUARKTWIN TECHNOLOGY LTD
Microchip USA
SupplyDigital Components
TANS Electronics
Perfect Parts
Kulean Microsystems
Problanco Electronics
Northwest PG Solutions
$5.721
GreenTree Electronics
Authorized Procurement Solutions
UHIMA Technologies
Provides good insulation and protection, making the FET durable and reliable in various operating conditions.
N-Channel FETs typically have lower on-resistance and higher current-handling capabilities, making them efficient for switching applications.
The built-in diode allows for efficient circuit design and protection against voltage spikes, enhancing the performance of the FET.
Designed specifically for switching applications, ensuring fast and efficient control of current flow in electronic circuits.
High breakdown voltage allows the FET to handle high voltage applications with reliability and safety.
High pulsed drain current rating ensures the FET can handle peak current loads without overheating or damage.
High power dissipation capability enables the FET to operate at high power levels without thermal issues.
Wide operating temperature range allows the FET to be used in various environmental conditions without performance degradation.
Low on-resistance ensures minimal power loss and high efficiency in switching applications.
Power Field Effect Transistors (FET) FCPF400N80ZL1-F154 attributes and parameters. Explore more Power Field Effect Transistors (FET) devices from Onsemi
Avalanche Energy Rating (EAS):
Case Connection:
Configuration:
Minimum DS Breakdown Voltage:
Maximum Drain Current (ID):
Maximum Drain-Source On Resistance:
Field Effect Transistor Technology:
Maximum Feedback Capacitance (Crss):
JEDEC-95 Code:
JESD-30 Code:
JESD-609 Code:
No. of Elements:
No. of Terminals:
Operating Mode:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Polarity or Channel Type:
Maximum Power Dissipation (Abs):
Maximum Pulsed Drain Current (IDM):
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Transistor Application:
Transistor Element Material:
Maximum Turn Off Time (toff):
Maximum Turn On Time (ton):
FCPF400N80ZL1-F154 Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
FDN5618P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Moisture Sensitivity Level (MSL): 1;
2N7002-T1-E3
Vishay Intertechnology
Vishay Intertechnology's 2N7002-T1-E3 is a N-CHANNEL FET for SWITCHING applications. Features include 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. With ENHANCEMENT MODE operation, this GULL WING transistor is ideal for small outline surface mount designs up to 150°C.
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
STM8S003F3P6TR
STMicroelectronics
STM8S003F3P6TR by STMicroelectronics is an 8-bit microcontroller with a max clock frequency of 16 MHz. It features 1024 RAM bytes, 128 data EEPROM size, and 5-ch 10-bit ADC channels. Ideal for industrial applications requiring low power mode and connectivity via I2C, SPI, and UART interfaces.
LM555CN
Rochester Electronics
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Shape: RECTANGULAR; Surface Mount: NO; No. of Functions: 1;
1N4148
American Power Devices
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LL4148
Micronas Semiconductor Holding Ag
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .2 A; Maximum Forward Voltage (VF): 1.2 V;
SS14
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
AT90CAN128-16AU
Atmel
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 64; Package Code: TQFP; Package Shape: SQUARE;
Hitano Enterprise
FDV304P
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Moisture Sensitivity Level (MSL): 1; Maximum Drain Current (ID): .46 A;
BAV99
Weitron Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; Maximum Output Current: .215 A; JESD-609 Code: e0; Maximum Forward Voltage (VF): .715 V;
BSS138LT3G
Onsemi
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
ULN-2803A
Vishay Sprague
Vishay Sprague's ULN-2803A is an 8-bit peripheral driver with a max supply voltage of 3V. Featuring open-collector output characteristics, it offers built-in transient protections and operates b/w -20°C to 85°C. Ideal for applications requiring sink current flow direction, this rectangular-shaped driver has a terminal pitch of 2.54mm and turn-on/off time of 1us.
Meritek Electronics
Pro-an Electronic
2N7002
Dc Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; No. of Elements: 1; Terminal Form: GULL WING;
BSS138LT1G
BSS138LT1G by Onsemi is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Operates b/w -55 to 150 °C with small outline package style for surface mount assembly.
Sprague Electric
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1.3 V; Maximum Output Current: .1 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel;
2N2222A
Hi-tron Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
IRF640
Harris Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 125 W; Maximum Turn Off Time (toff): 122 ns; Transistor Element Material: SILICON;
IRF740PBF
International Rectifier
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 125 W; Transistor Element Material: SILICON; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
IRF540PBF
Vishay Siliconix
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Minimum DS Breakdown Voltage: 100 V; Transistor Element Material: SILICON; Package Shape: RECTANGULAR;
IRF540SPBF
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; No. of Terminals: 2; Avalanche Energy Rating (EAS): 230 mJ; Maximum Drain-Source On Resistance: .077 ohm;
FDS8949_F085
FDS8949_F085 by Fairchild Semiconductor is a N-CHANNEL Power FET for SWITCHING applications. Features include 40V DS Breakdown Voltage, 20A IDM, and 0.029 ohm RDS(on). With a max power dissipation of 2W and operating temperature up to 150°C, it's ideal for high-performance electronic devices requiring efficient power management in compact designs.
IRF530A
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 55 W; JESD-609 Code: e3; Maximum Operating Temperature: 175 Cel;
BS170
Telcom Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): .83 W; JESD-609 Code: e0; Maximum Drain Current (ID): .5 A;
IXTA96P085T
IXYS Corporation
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 298 W; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel;
FDMS86350ET80
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 187 W; Package Style (Meter): SMALL OUTLINE; No. of Terminals: 5;
FDMC86139P
FDMC86139P by Onsemi is a P-CHANNEL Power FET with 100V DS Breakdown Voltage and 30A IDM. Ideal for SWITCHING applications, it features a built-in DIODE, 0.067 ohm RDS(on), and operates in ENHANCEMENT MODE.
FQP27P06_SW82127
FQP27P06_SW82127 by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage and 108A IDM. Ideal for SWITCHING applications, it features a single configuration with built-in diode and operates in ENHANCEMENT MODE. With a max power dissipation of 120W, this transistor has a -55 to 175 °C operating temperature range.
FDMC86102LZ
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 41 W; No. of Terminals: 5; Peak Reflow Temperature (C): 260;
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 40 W; Terminal Form: NO LEAD; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
PSMN040-100MSEX
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): 30; Avalanche Energy Rating (EAS): 54 mJ; Transistor Application: SWITCHING;
IRLML2030TRPBF
Infineon Technologies
IRLML2030TRPBF by Infineon is a N-CHANNEL Power FET with 30V DS Breakdown Voltage and 11A IDM. Ideal for SWITCHING applications, it features a SINGLE configuration with BUILT-IN DIODE in PLASTIC/EPOXY package. Operating from -55 to 150 °C, it has 0.1 ohm Drain-Source On Resistance and 12pF Feedback Capacitance.
JANTX2N6796
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 25 W; Transistor Application: SWITCHING; Operating Mode: ENHANCEMENT MODE;
FDD4243-G
Power Field-Effect Transistors; Maximum Time At Peak Reflow Temperature (s): 30; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 260; JESD-609 Code: e3; Terminal Finish: MATTE TIN;
IRLML0100TRPBF-1
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; No. of Terminals: 3; JEDEC-95 Code: TO-236AB; Terminal Form: GULL WING;
FDD8424H_F085A
FDD8424H_F085A by Onsemi is a Power FET with N-CHANNEL and P-CHANNEL polarity. It features 40V DS breakdown voltage, 55A max pulsed drain current, and 0.024 ohm max drain-source resistance. Ideal for switching applications in automotive electronics due to AEC-Q101 standard compliance.
NVTFS5116PLTAG
NVTFS5116PLTAG by Onsemi is a P-CHANNEL FET with 60V DS Breakdown Voltage, 126A IDM, and 0.072ohm RDS(on). Ideal for power management applications in small outline packages. Operating at up to 175°C, it features a built-in diode and avalanche energy rating of 45mJ.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FCPF067N65S3
FCPF067N65S3 by Onsemi is a N-CHANNEL Power FET with 650V DS Breakdown Voltage. It has a max IDM of 110A and EAS of 214mJ, suitable for SWITCHING applications. Operating in ENHANCEMENT MODE, it offers 0.067 ohm RDS(on) and can handle up to 46W power dissipation.
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 46 W; Terminal Position: SINGLE; Package Shape: RECTANGULAR;
FCPF190N60E
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 39 W; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Peak Reflow Temperature (C): NOT SPECIFIED;
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 39 W; No. of Elements: 1; JESD-609 Code: e3;
FCPF190N60
FCPF190N60 by Onsemi is a N-CHANNEL Power FET with 600V DS Breakdown Voltage. It has 20.2A Max Drain Current, 0.199 ohm RDS(on), and 400mJ Avalanche Energy Rating. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE at up to 150°C temperature.
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 39 W; Transistor Element Material: SILICON; JESD-609 Code: e3;
FCPF290N80
FCPF290N80 by Onsemi is a Power FET with 800V DS breakdown voltage, 42A IDM, and 0.29 ohm RDS(on). Ideal for switching applications in enhancement mode operation. Features N-channel type, single configuration with built-in diode, and metal-oxide semiconductor technology.
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Maximum Pulsed Drain Current (IDM): 42 A; Package Shape: RECTANGULAR;
FCPF190N60E-F152
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 39 W; No. of Terminals: 3; Avalanche Energy Rating (EAS): 400 mJ;
FCPF190N60E_F152
Fairchild Semiconductor FCPF190N60E_F152 is a N-CHANNEL Power FET with 600V DS Breakdown Voltage. Ideal for SWITCHING applications, it features 61.8A IDM, 0.19 ohm RDS(on), and 400mJ EAS. Package: PLASTIC/EPOXY, Shape: RECTANGULAR, Operating Temp: 150°C.
FCPF600N65S3R0L-F154
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 24 W; No. of Elements: 1; No. of Terminals: 3;
FCPF11N60T
FCPF11N60T by Onsemi is a N-CHANNEL Power FET with 600V DS Breakdown Voltage, ideal for SWITCHING applications. It features a Max ID of 11A, 0.38 ohm Drain-Source Resistance, and an EAS of 340mJ. This METAL-OXIDE SEMICONDUCTOR transistor operates in ENHANCEMENT MODE at up to 150°C temperature.
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 36 W; Maximum Operating Temperature: 150 Cel; Package Body Material: PLASTIC/EPOXY;
FCPF11N60F
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 36 W; JESD-609 Code: e3; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
FCPF11N60F by Onsemi is a N-CHANNEL power FET with a min DS breakdown voltage of 600V. It has a max pulsed drain current of 33A and an avalanche energy rating of 340mJ. This transistor is commonly used for switching applications.
FCPF11N60NT
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 32.1 W; JEDEC-95 Code: TO-220AB; Terminal Finish: MATTE TIN;
FCPF11N60NT by Onsemi is a N-CHANNEL Power FET with 600V DS Breakdown Voltage. Ideal for SWITCHING applications, it features 32.4A IDM and 0.299 ohm RDS(on). Operating in ENHANCEMENT MODE, it has a max power dissipation of 32.1W and can handle up to 150°C temperature.
FCPF190N60E-F154
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 39 W; Minimum Operating Temperature: -55 Cel; Avalanche Energy Rating (EAS): 400 mJ;
FCPF22N60NT
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 39 W; Minimum DS Breakdown Voltage: 600 V; Maximum Pulsed Drain Current (IDM): 66 A;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 39 W; JESD-609 Code: e3; Avalanche Energy Rating (EAS): 672 mJ;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved