Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
5LP01SP by Onsemi is a P-CHANNEL FET with 50V DS Breakdown Voltage, 0.07A Drain Current, and 23 ohm On Resistance. Ideal for SWITCHING applications due to SINGLE configuration with BUILT-IN DIODE AND RESISTOR. Operates in ENHANCEMENT MODE at up to 150 °C temperature range.
Median Price
$0.130
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
Adafruit Industries
1+ parts
$1.245
100+ parts
$1.133
1k+ parts
$1.021
10k+ parts
-
Rochester
$0.106
$0.088
$0.078
DigiKey
Digiode
$0.083
Vyrian
$0.087
DigiKey Marketplace
Corphita
Component Stockers USA
$0.090
$0.080
Corohmni
$0.736
Advanced Electronics
QUARKTWIN TECHNOLOGY LTD
Continental Prestige Electronics
Problanco Electronics
SupplyDigital Components
TANS Electronics
Northwest PG Solutions
UHIMA Technologies
Kulean Microsystems
Native Components
This material offers good durability and reliability for the transistor, making it suitable for use in various environments.
P-channel transistors are known for their high input impedance and low on-state resistance, making them ideal for switching applications.
The built-in diode and resistor simplify circuit design and reduce component count, making for easier integration into a system.
Designed specifically for switching applications, this transistor offers fast on/off response times and efficient operation.
With a high breakdown voltage, this transistor can handle higher voltage levels, increasing its versatility in different circuit designs.
The rectangular shape allows for easy placement on a PCB and efficient use of space, optimizing the overall layout of the circuit.
Through-hole terminals provide a secure and reliable connection to the circuit board, ensuring stable performance under various conditions.
Enhancement mode transistors offer higher input impedance and lower leakage current, improving overall efficiency in the circuit.
With a maximum drain current rating of 0.07 A, this transistor can handle moderate current levels, suitable for many applications.
Having three terminals allows for easy connection in the circuit, providing flexibility in the overall design.
The maximum power dissipation of 0.25 W ensures the transistor can handle heat dissipation effectively, contributing to its overall reliability.
The in-line package style is compact and space-saving, ideal for applications with limited board space or where a low-profile design is required.
MOSFET technology offers high efficiency, fast switching speeds, and low input capacitance, making it a preferred choice for many applications.
With a maximum operating temperature of 150 °C, this transistor can withstand high-temperature environments, ensuring reliable performance.
Silicon transistors offer high performance, reliability, and temperature stability, making them a popular choice in many electronic applications.
This terminal finish provides good conductivity and corrosion resistance, ensuring a reliable connection over the long term.
With a maximum drain current of 0.07 A, this transistor can handle moderate current levels, suitable for various switching applications.
The low drain-source on resistance of 23 ohms minimizes power loss and improves efficiency in the circuit.
Having a single terminal position simplifies the connection process, making it easier to integrate this transistor into the circuit.
Small Signal Field Effect Transistors (FET) 5LP01SP attributes and parameters. Explore more Small Signal Field Effect Transistors (FET) devices from Onsemi
Configuration:
Minimum DS Breakdown Voltage:
Maximum Drain Current (Abs) (ID):
Maximum Drain Current (ID):
Maximum Drain-Source On Resistance:
Field Effect Transistor Technology:
JESD-30 Code:
No. of Elements:
No. of Terminals:
Operating Mode:
Maximum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Polarity or Channel Type:
Maximum Power Dissipation (Abs):
Qualification:
Sub-Category:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Transistor Application:
Transistor Element Material:
5LP01SP Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
RC0402FR-0710KL
Yageo
Yageo's RC0402FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance, suitable for applications requiring a rated power dissipation of 0.0625 W. With a temperature coefficient of 100 ppm/°C, it operates b/w -55 to 155 °C, making it ideal for various electronic circuits.
1N4148
Rfe International
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Forward Voltage (VF): 1 V; Config: SINGLE;
FDN5618P
Onsemi
FDN5618P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage. It features a single configuration with built-in diode, suitable for switching applications. With 10A IDM and 0.17 ohm RDS(on), it operates in the temperature range of -55 to 150 °C, making it ideal for various electronic devices.
BAV99
Nexperia
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Yangzhou Yangjie Electronics
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS138W-7-F
Diodes Incorporated
Diodes Inc.'s BSS138W-7-F is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, Gull Wing terminals, and operates in enhancement mode. With 0.2A max drain current and 3.5 ohm RDS(on), it's UL recognized and suitable for small outline packages at temperatures ranging from -55 to 150°C.
2N7002
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Minimum DS Breakdown Voltage: 60 V; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; No. of Terminals: 3;
Renesas Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM107H/883
Linear Technology
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
LL4148
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
PAP-06V-S
J S T Mfg
PAP-06V-S by J S T Mfg is a 6-contact BOARD CONNECTOR with 94V-0 UL Flammability Code. It has FEMALE contacts, CRIMP termination, and comes WITH CABLE ASSEMBLY for CABLE mounting applications.
2N7002-T1-E3
Vishay Intertechnology
Vishay Intertechnology's 2N7002-T1-E3 is a N-CHANNEL FET for SWITCHING applications. Features include 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. With ENHANCEMENT MODE operation, this GULL WING transistor is ideal for small outline surface mount designs up to 150°C.
North American Philips Discrete Products Div
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .1 A;
FDN306P
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Maximum Drain Current (Abs) (ID): 2.6 A; Operating Mode: ENHANCEMENT MODE;
1N5819HW-7-F
1N5819HW-7-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 1A output current, and 0.75V forward voltage. It's a surface mount device in a small outline package ideal for efficiency applications at temperatures ranging from -65 to 125°C.
B340A-13-F
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Rectron
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FDV304P
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Moisture Sensitivity Level (MSL): 1; Maximum Drain Current (ID): .46 A;
BSS138LT1
Onsemi's BSS138LT1 is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE at -55 to 150 °C temperature range. Its GULL WING terminals and SMALL OUTLINE package make it suitable for surface mount designs.
BSS138BK
Micro Commercial Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): .36 A; Package Body Material: PLASTIC/EPOXY; Peak Reflow Temperature (C): 260;
DMN63D8LDW-7
DMN63D8LDW-7 by Diodes Inc. is a N-channel FET with 30V DS breakdown voltage, 0.22A max drain current, and 4.5 ohm max on resistance. Ideal for switching applications in automotive electronics due to AEC-Q101 standard compliance and enhancement mode operation.
SI4532CDY-T1-GE3
SI4532CDY-T1-GE3 by Vishay Intertechnology is a Small Signal FET with N/P-channel, 2 elements, and built-in diode. It operates in enhancement mode for switching applications. With max drain current of 6A, 0.047 ohm RDS(on), and 30V breakdown voltage, it's ideal for high-power circuits in small outline packages.
2N7002K
Kec
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: YES; Terminal Position: DUAL; Package Style (Meter): SMALL OUTLINE; Minimum DS Breakdown Voltage: 60 V;
BSS138-7-F
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): .2 A; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
BSS123
Motorola
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation Ambient: .55 W; Package Style (Meter): SMALL OUTLINE; Package Shape: RECTANGULAR;
2N7002KW
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Minimum DS Breakdown Voltage: 60 V; Transistor Application: SWITCHING;
SN7002WH6327XTSA1
Infineon Technologies
Infineon Technologies' SN7002WH6327XTSA1 is a small signal N-channel FET with a min DS breakdown voltage of 60V. It features a single configuration with built-in diode and operates in enhancement mode. This surface mount transistor, made of silicon, has a max drain current of 0.23A and a max drain-source on resistance of 5 ohm. It is commonly used in automotive applications due to its AEC-Q101 reference standard and moisture sensitivity level of 1.
NDS0605
National Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; JESD-30 Code: R-PDSO-G3; Package Shape: RECTANGULAR;
IRLML2803TRPBF
Infineon's IRLML2803TRPBF is a N-CHANNEL FET with 30V DS Breakdown Voltage, ideal for SWITCHING applications. It features 1.2A Drain Current, 0.25 ohm On Resistance, and operates in ENHANCEMENT MODE. With GULL WING terminals and PLASTIC/EPOXY package, it can handle temperatures from -55 to 150 °C.
2N7002-7-F
Diodes Inc. 2N7002-7-F is a N-channel FET with 60V DS breakdown voltage, 0.115A max drain current, and 13.5 ohm RDS(on). Ideal for switching applications in enhancement mode operation. Features Gull Wing terminals, small outline package style, and operates up to 150°C.
FDN5630
FDN5630 by Onsemi is a small signal N-CHANNEL FET with a min DS breakdown voltage of 60V. It is commonly used for switching applications due to its single configuration with built-in diode and max drain current of 1.7A.
2N7002PW,115
NXP Semiconductors
2N7002PW,115 by NXP Semiconductors is a single N-channel FET with max drain current of 0.31A and power dissipation of 0.83W. Ideal for applications requiring high temperature resistance up to 150°C, it features metal-oxide semiconductor technology and surface mount configuration.
BSS84AKM,315
NXP Semiconductors' BSS84AKM,315 is a P-CHANNEL FET with 50V DS breakdown voltage and 0.23A max drain current. Ideal for switching applications, it features a single configuration with built-in diode in a chip carrier package style. Operating at up to 150°C, it has an 8.5 ohm max drain-source on resistance.
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 2.5 ohm; Maximum Operating Temperature: 150 Cel; Package Shape: RECTANGULAR;
IRLML6344TRPBF
Small Signal Field-Effect Transistors; Qualification: Not Qualified; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 1; Maximum Drain Current (Abs) (ID): 5 A; Maximum Time At Peak Reflow Temperature (s): 30;
BSS123LT1
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; JEDEC-95 Code: TO-236AB; Terminal Finish: Tin/Lead (Sn/Pb);
NX3008CBKS,115
N-CHANNEL AND P-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): .35 A; Terminal Form: GULL WING; No. of Terminals: 6;
BSS138KT-TP
Small Signal Field-Effect Transistors; Minimum DS Breakdown Voltage: 50 V; Maximum Drain-Source On Resistance: 2.5 ohm; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Peak Reflow Temperature (C): NOT SPECIFIED; Maximum Drain Current (ID): .25 A;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
5LP01C-TB-E
Small Signal Field-Effect Transistors; JESD-609 Code: e6; Moisture Sensitivity Level (MSL): 1; Terminal Finish: Tin/Bismuth (Sn/Bi);
5LP01C-TB-H
Small Signal Field-Effect Transistors; Moisture Sensitivity Level (MSL): 1; JESD-609 Code: e6; Terminal Finish: Tin/Bismuth (Sn/Bi);
5LP01M
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: YES; Maximum Power Dissipation (Abs): .15 W; Maximum Operating Temperature: 150 Cel; Transistor Element Material: SILICON;
5LP01M-TL-E
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 1; No. of Terminals: 3; Package Style (Meter): SMALL OUTLINE;
5LP01M-TL-H
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Terminal Position: DUAL; Maximum Drain-Source On Resistance: 23 ohm; No. of Elements: 1;
5LP01SP-AC
P-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): .25 W; No. of Elements: 1; Maximum Drain Current (ID): .07 A;
5LP01SS-TL-E
P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .15 W; Terminal Finish: Tin/Bismuth (Sn/Bi); JESD-609 Code: e6;
5LP01SS-TL-H
P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .15 W; Moisture Sensitivity Level (MSL): 1; Maximum Drain Current (Abs) (ID): .07 A;
5LP01S-TL-E
Small Signal Field-Effect Transistors; Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): 30; JESD-609 Code: e6; Terminal Finish: TIN BISMUTH; Moisture Sensitivity Level (MSL): 1;
Sanyo Electric
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: YES; Maximum Power Dissipation (Abs): .15 W; Transistor Application: SWITCHING; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
5LP02C
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: YES; Maximum Power Dissipation (Abs): .25 W; Package Body Material: PLASTIC/EPOXY; No. of Elements: 1;
5LP01N
Sanyo Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Terminal Position: BOTTOM; Maximum Drain-Source On Resistance: 23 ohm;
5LP01SP
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; No. of Elements: 1; Operating Mode: ENHANCEMENT MODE; Maximum Drain Current (ID): .07 A;
5LP01SS
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .15 W; No. of Elements: 1; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
5LP01S
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: YES; Maximum Power Dissipation (Abs): .15 W; Terminal Position: DUAL; Minimum DS Breakdown Voltage: 50 V;
5LP02SP
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Power Dissipation (Abs): .25 W; Qualification: Not Qualified; Operating Mode: ENHANCEMENT MODE;
5LP01C
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .25 W; JESD-30 Code: R-PDSO-G3; Package Style (Meter): SMALL OUTLINE;
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Power Dissipation (Abs): .4 W; Maximum Operating Temperature: 150 Cel; No. of Terminals: 3;
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Power Dissipation (Abs): .25 W; Terminal Position: SINGLE; Maximum Drain-Source On Resistance: 23 ohm;
5LP02N
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Power Dissipation (Abs): .4 W; Terminal Position: BOTTOM; Maximum Operating Temperature: 150 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved