Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MMG3014NT1 by NXP Semiconductors is a RF & Microwave Amplifier with 15 dBm CW input power, 18.5 dB gain, and 50 ohm impedance. It operates from 40 MHz to 4000 MHz, suitable for wide band medium power applications. This component has a plastic/epoxy package body material and requires a 5V power supply with max current of 160 mA.
Median Price
$2.470
Lifecycle Status
Suppliers In-Stock
21
In-Stock Inventory
1k+
Arrow
1+ parts
$1.383
100+ parts
$1.333
1k+ parts
$1.283
10k+ parts
$1.249
Verical
$2.006
-
Chip1Stop
$2.570
Adafruit Industries
$3.317
$3.284
Mouser Electronics
$4.600
$2.920
$2.480
Element14
$6.290
$4.740
$3.620
DigiKey
Richardson RFPD
Rochester
$2.210
$1.980
$1.860
Farnell
$2.110
$2.020
Digiode
$1.197
Nova Conductors
$1.772
Component Electronics Inc.
$3.080
$2.310
$2.000
Vyrian
Anansix
Cyclops Electronics Ltd
Flip Electronics
Sea View Technologies
Bristol Electronics
Electronics Depot
ComSIT Distribution GmbH
Component Stockers USA
$1.120
$1.580
$1.510
Corphita
$1.134
Aztec Data Supply Inc.
Corohmni
$1.265
Aranea Global
$1.737
$1.667
Argo Parts USA
Continental Prestige Electronics
$2.260
$1.650
$1.030
Ampacity Inc.
$2.660
Semicontronic
$2.594
$2.580
Advanced Electronics
$3.151
Lixinc
A-Z Elektronik GmbH
Perfect Parts
Kepictronics
Authorized Procurement Solutions
GreenTree Electronics
Futuretech Components
UNI Independent Distributors
Provides a lightweight and durable housing for the amplifier, making it suitable for various applications.
Can handle relatively high input power levels, ensuring reliable performance.
Operates at a standard 5V power supply, making it compatible with many systems.
Utilizes bipolar technology for high linearity and reliability in amplification.
Provides a considerable gain in signal strength, improving overall system performance.
Covers a wide range of frequencies starting from 40 MHz, suitable for various RF applications.
Capable of operating at high frequencies up to 4000 MHz, making it versatile for different RF and microwave applications.
RF & Microwave Amplifiers MMG3014NT1 attributes and parameters. Explore more RF & Microwave Amplifiers devices from NXP Semiconductors
Characteristic Impedance:
Construction:
Gain:
Maximum Input Power (CW):
JESD-609 Code:
Mounting Feature:
No. of Functions:
No. of Terminals:
Maximum Operating Frequency:
Minimum Operating Frequency:
Package Body Material:
Package Equivalence Code:
Power Supplies (V):
RF or Microwave Device Type:
Sub-Category:
Maximum Supply Current:
Technology:
Terminal Finish:
MMG3014NT1 RF & Microwave trade compliance attributes, and parameters.
HTS
8542.33.00.01
SB
8542.33.00.00
NXP is a leading semiconductor company that creates cutting-edge technology to power secure connections in a smarter world. Founded in 2006, they have grown to become one of the top five global semiconductor companies and serve their customers in over 70 countries around the world.
Executive Director, President, CEO
Kurt Sievers
Executive VP, CFO
Bill Betz
Executive VP, Chief Sales Officer
Ron Martino
ICN8
Fabrication
Fab Initiation
1996
Netherlands
Nijmegen
Wafer Capacity
55,000
ATMC (Austin Tech & Mfg Center)
1995
USA
Austin
30,000
N/A
1989
Germany
Boeblingen
CHD
1993
Chandler
OHTC
1991
24,000
New Expansion Fab
2026
ECHO
2020
10,000
1N4148
Unitrode
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
AT90CAN128-16AUR
Microchip Technology
AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.
LM317T
Linear Technology
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Operating Temperature (TJ-Min): 0 Cel; No. of Functions: 1; JESD-609 Code: e0;
Shandong Yiguang Electronic Joint Stock
BAV99
Bkc Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
1N4148WT
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Telcom Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
IRLML6402TRPBF
Infineon Technologies
IRLML6402TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 20V DS Breakdown Voltage, 22A IDM, and 0.065 ohm RDS(on). With a small outline package and matte tin finish, it operates in temperatures from -55 to 150 °C.
1N4148WS
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
International Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Continental Device India
DS18B20U+
Analog Devices
DS18B20U+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
STM32H753BIT6
STMicroelectronics
STM32H753BIT6 by STMicroelectronics is a 32-bit microcontroller with 208 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and extensive peripherals for industrial applications like CAN, Ethernet, and USB connectivity. With a wide temperature range of -40 to +85 °C, it's ideal for demanding environments requiring high-speed processing capabilities.
FDD5614P
Onsemi
FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.
MS3V-T1R32.768KHZ+/-20PPM12.5PF
Golledge Electronics
MS3V-T1R32.768KHZ+/-20PPM12.5PF by Golledge Electronics is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 12.5 pF load capacitance. It is ideal for applications requiring precise timing in temperature-sensitive environments due to its -40 to 85 °C operating range.
LM358AN
Texas Instruments
LM358AN by Texas Instruments is an Operational Amplifier with 2 functions. It has a Max Input Offset Voltage of 5000 uV and Nominal Common Mode Reject Ratio of 85 dB. Widely used in voltage-feedback applications due to its high Min Voltage Gain of 15000 and Unity Gain Bandwidth of 1000 kHz.
ULN2803A
Rochester Electronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Additional Features: LOGIC LEVEL COMPATIBLE; Qualification: Not Qualified;
Diodes Incorporated
Promax-johnton
MGA-635P8-BLKG
Broadcom
Broadcom's MGA-635P8-BLKG is a GAAS RF amplifier with 16.5 dB gain, operating from 2300 to 4000 MHz. It has a max input power of 20 dBm and requires a 5V power supply. Ideal for wideband medium-power applications, it features surface mounting and operates in temperatures ranging from -40 to 85°C.
HMC499
Analog Devices' HMC499 is a wide band medium power RF amplifier with 12 dB gain and 20 dBm CW input power. Operating from -55°C to 85°C, it covers frequencies from 21 GHz to 32 GHz. Ideal for RF and microwave applications requiring high performance in a compact component package.
ERA-3SM+
Mini-circuits
Mini-circuits ERA-3SM+ is a wideband low power RF amplifier with 15.4 dB gain and 50 ohm impedance. It operates from 0 to 3000 MHz, handling up to 13 dBm CW input power. Ideal for surface mount applications in RF and microwave systems, it has a compact plastic/epoxy package and requires only a 3V supply.
BGU8103
NXP Semiconductors
The NXP Semiconductors BGU8103 is a narrow band low power RF amplifier with a gain of 14.5 dB. It operates at frequencies b/w 1559 MHz and 1610 MHz, making it suitable for applications in the RF and microwave field. Its compact surface mount package and low power consumption of 1.6 mA make it an ideal choice for various wireless communication systems.
SBB2089ZSR
Rf Micro Devices
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Construction: COMPONENT;
HELA-10+
HELA-10+ by Mini-circuits is a wideband medium power RF amplifier with 9.5 dB gain, operating from 50 MHz to 1000 MHz. It has a max input power of 20 dBm and VSWR of 1.22, suitable for applications requiring high-frequency amplification in RF & microwave systems.
HMC462LP5ETR
Analog Devices' HMC462LP5ETR is a GAAS technology RF amplifier with 32 terminals, operating from -40 to 85°C. It requires a 5V power supply, drawing a max of 84mA. This wideband low-power device is ideal for surface mount applications in RF and microwave systems.
HMC451LP3E
Hittite Microwave
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Minimum Operating Frequency: 5000 MHz;
ZHL-1-2W
ZHL-1-2W by Mini-circuits is a COAXIAL RF amplifier with 29 dB Gain, 10 dBm CW input power, and VSWR of 2. Ideal for wideband high-power applications from 5 MHz to 500 MHz. Operating temperature range: -20°C to +65°C.
MAX2659ELT/V+
Maxim Integrated
NARROW BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: BICMOS; Screening Level: AEC-Q100;
CMD192C5
Custom Mmic Design Services
WIDE BAND LOW POWER; Minimum Operating Temperature: -40 Cel; Gain: 17 dB; JESD-609 Code: e4; Terminal Finish: Nickel/Palladium/Gold (Ni/Pd/Au); Additional Features: LOW NOISE;
ADL8107ACPZN
ADL8107ACPZN by Analog Devices is a PHEMT technology RF amplifier with 18 dB gain, operating frequency range of 6-18 GHz, and max input power of 22 dBm. Ideal for wideband low-power applications in RF and microwave systems due to its high performance and compact surface-mount construction.
HMC636ST89TR
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Package Equivalence Code: TO-243;
MAAM28000-A1G
M/a-com Technology Solutions
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: CERAMIC; Technology: GAAS; Construction: COMPONENT;
GALI-6F
GALI-6F by Mini-circuits is a wide band low power RF amplifier with 10 dB gain and 50 ohm impedance. It operates from 0 to 4000 MHz, handling up to 20 dBm CW input power. Ideal for RF & microwave applications requiring compact surface mount components.
MW7IC930NR1
Freescale Semiconductor
NARROW BAND HIGH POWER; Package Body Material: PLASTIC/EPOXY; Technology: MOS; Minimum Operating Frequency: 920 MHz; Package Equivalence Code: FLNG,.67"H.SPACE; JESD-609 Code: e3;
HMC311ST89TR
Analog Devices' HMC311ST89TR is a wide band low power RF amplifier with 5V supply, operating from -40 to 85°C. It features bipolar technology, surface mount package, and draws max 74mA current. Ideal for RF & microwave applications requiring compact amplification solutions.
HMC634LC4TR
WIDE BAND LOW POWER; Minimum Operating Frequency: 5000 MHz; Characteristic Impedance: 50 ohm; Maximum Input Power (CW): 10 dBm; Construction: COMPONENT; Maximum Operating Frequency: 20000 MHz;
HMC608LC4
WIDE BAND MEDIUM POWER; Gain: 27 dB; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier; Construction: COMPONENT; Maximum Operating Temperature: 85 Cel; Minimum Operating Frequency: 9500 MHz;
MAX2630EUS+T
Analog Devices' MAX2630EUS+T is a wide band low power RF amplifier with 11dB gain, operating b/w 800-1000MHz. It has a max input power of 5dBm and VSWR of 1.25, suitable for surface mount applications in RF & microwave systems. With a compact package and low supply current of 11mA at 3V, it's ideal for high-frequency signal amplification.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MMG3014NT1
WIDE BAND MEDIUM POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Power Supplies (V): 5;
MMG3H21NT1
WIDE BAND MEDIUM POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Body Material: PLASTIC/EPOXY; Package Equivalence Code: TO-243; No. of Functions: 1;
WIDE BAND MEDIUM POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Body Material: PLASTIC/EPOXY; Package Equivalence Code: TO-243; Maximum Supply Current: 110 mA;
MMG3002NT1
WIDE BAND LOW POWER; Maximum Operating Frequency: 3600 MHz; Gain: 19.3 dB; Maximum Input Power (CW): 12 dBm; JESD-609 Code: e3; Minimum Operating Frequency: 40 MHz;
Motorola
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Package Equivalence Code: TO-243;
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Maximum Input Power (CW): 12 dBm;
MMG3006NT1
WIDE BAND HIGH POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Construction: COMPONENT;
WIDE BAND HIGH POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Maximum Supply Current: 960 mA;
MMG3013NT1
MMG3014N
NARROW BAND HIGH POWER; Maximum Operating Frequency: 2170 MHz; Characteristic Impedance: 50 ohm; Gain: 15 dB; Minimum Operating Frequency: 2110 MHz; Maximum Voltage Standing Wave Ratio: 5;
MMG3015NT1
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; No. of Functions: 1;
MMG3003NT1
MMG3003NT1 by NXP Semiconductors is a RF & Microwave Amplifier with 15 dBm CW input power, 19.3 dB gain, and 6.2V power supply. It operates from 40 MHz to 3600 MHz, ideal for wide band medium power applications requiring surface mounting feature.
MMG3008NT1
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Maximum Input Power (CW): 10 dBm;
MMG3009NT1
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Minimum Operating Frequency: 0 MHz;
MMG3004NT1
MMG3004NT1 by NXP Semiconductors is a RF & Microwave Amplifier with 18 dBm CW input power, 15 dB gain, and 400-2200 MHz frequency range. It is a wide band medium power device suitable for various applications requiring a 50 ohm characteristic impedance and surface mounting feature.
MMG3010NT1
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Characteristic Impedance: 50 ohm;
MMG3007NT1
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Terminal Finish: Matte Tin (Sn);
MMG3001NT1
MMG3001NT1 by NXP Semiconductors is a RF & Microwave Amplifier with 10 dBm CW input power, 1.17 VSWR, and 18 dB gain. It operates from 40 MHz to 3600 MHz, ideal for wide band low power applications. This component has a characteristic impedance of 50 ohms and requires a 5.6V power supply with a max current draw of 300 mA.
MMG3011NT1
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Maximum Operating Frequency: 6000 MHz;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved