Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Construction: COMPONENT;
Median Price
$1.337
Lifecycle Status
Suppliers In-Stock
13
In-Stock Inventory
1k+
Adafruit Industries
1+ parts
$1.486
100+ parts
$1.352
1k+ parts
$1.219
10k+ parts
-
Rochester
$1.200
$1.070
$1.010
DigiKey
$1.310
Farnell
$1.620
Verical
$1.262
Digiode
$1.264
Vyrian
$1.330
Chip Stock
Anansix
Contempo Components LLC
Semi Source
Connector Distribution Corp
Right Parts Inc.
Corphita
$1.197
Advanced Electronics
A-Z Elektronik GmbH
UNI Independent Distributors
Kepictronics
Perfect Parts
RF & Microwave Amplifiers MMG3011NT1 attributes and parameters. Explore more RF & Microwave Amplifiers devices from NXP Semiconductors
Characteristic Impedance:
Construction:
Gain:
Maximum Input Power (CW):
JESD-609 Code:
Mounting Feature:
No. of Functions:
No. of Terminals:
Maximum Operating Frequency:
Minimum Operating Frequency:
Package Body Material:
Package Equivalence Code:
Power Supplies (V):
RF or Microwave Device Type:
Sub-Category:
Maximum Supply Current:
Technology:
Terminal Finish:
MMG3011NT1 RF & Microwave trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.31.00.01
SB
8542.31.00.00
NXP is a leading semiconductor company that creates cutting-edge technology to power secure connections in a smarter world. Founded in 2006, they have grown to become one of the top five global semiconductor companies and serve their customers in over 70 countries around the world.
Executive Director, President, CEO
Kurt Sievers
Executive VP, CFO
Bill Betz
Executive VP, Chief Sales Officer
Ron Martino
ICN8
Fabrication
Fab Initiation
1996
Netherlands
Nijmegen
Wafer Capacity
55,000
ATMC (Austin Tech & Mfg Center)
1995
USA
Austin
30,000
N/A
1989
Germany
Boeblingen
CHD
1993
Chandler
OHTC
1991
24,000
New Expansion Fab
2026
ECHO
2020
10,000
2N7002
Infineon Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
LM358M
Raytheon Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
CC0603KRX7R9BB103
Yageo
Yageo CC0603KRX7R9BB103 is a 0603 SMT ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
1N4148
Texas Instruments
1N4148 by Texas Instruments is a rectifier diode with max reverse recovery time of 0.004 us and max forward voltage of 1V. Ideal for applications requiring low reverse current such as signal demodulation circuits. Operates at max temp of 200°C, making it suitable for high-temperature environments.
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
BAV99
Sprague Electric
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1.3 V; Maximum Output Current: .1 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel;
BSS138
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
SMBJ18CA
Mde Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Fairchild Semiconductor
Telefunken Microelectronics
2N2222A
Itt Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BSS138LT1G
Onsemi
BSS138LT1G by Onsemi is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Operates b/w -55 to 150 °C with small outline package style for surface mount assembly.
LM7805CT
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
LL4148
Rugao Dachang Electronic
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
MMBT3904-7-F
Diodes Incorporated
Diodes Inc. MMBT3904-7-F is a NPN BJT transistor for switching applications. Features include VCEsat of 0.3V, hFE of 30, and IC of 0.2A. With a max operating temp of 150°C, it's ideal for small outline SMT designs in automotive electronics.
General Semiconductor
Electronic Devices
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Hi-tron Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
MMBT3904LT1G
MMBT3904LT1G by Onsemi is a NPN BJT with max. collector-emitter voltage of 40V, hFE of 30, and fT of 300MHz. Ideal for small signal applications in electronics due to its compact size, high transition frequency, and low power dissipation capabilities.
Silicon Standard
ALM-32220
Broadcom
ALM-32220 by Broadcom is a wide band high power RF amplifier with 13.5 dB gain, operating from 1700 to 2700 MHz. It can handle up to 28 dBm CW input power and has a characteristic impedance of 50 ohm. Ideal for applications requiring high power amplification in RF & Microwave systems.
HMC460LC5
Hittite Microwave
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Package Body Material: CERAMIC; Technology: GAAS; Minimum Operating Frequency: 0 MHz;
SGA6489Z
Qorvo
SGA6489Z by Qorvo is a wide band low power RF amplifier with 18.4 dB gain, operating from 0 to 3500 MHz. It has a max input power of 18 dBm and operates at temperatures ranging from -40°C to 85°C. This component is ideal for RF and microwave applications requiring high performance in a compact package.
RF3827SR
Qorvo's RF3827SR is a GaAs wide band medium power amplifier with 16 terminals, operating b/w -40°C to 85°C. It requires an 8V power supply and draws a max current of 130mA. Ideal for surface mount applications in RF & microwave systems.
TGA4521
Triquint Semiconductor
WIDE BAND MEDIUM POWER; Technology: GAAS; Construction: COMPONENT; Package Equivalence Code: DIE OR CHIP; Power Supplies (V): 6; JESD-609 Code: e3/e4;
HMC7950LS6TR
Analog Devices
Analog Devices' HMC7950LS6TR is a wide band low power RF amplifier with 13 dB gain, operating from 2-28 GHz. It can handle up to 20 dBm CW input power and operates b/w -40°C to +85°C. Ideal for RF & microwave applications requiring high frequency amplification in a compact form factor.
HMC451LP3E
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Minimum Operating Frequency: 5000 MHz;
CMPA0060025F1
Wolfspeed
WIDE BAND HIGH POWER;
HMC465LP5E
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Characteristic Impedance: 50 ohm;
RF3931
Rf Micro Devices
RF3931 by Rf Micro Devices is a ceramic module with a wide band high power RF or microwave device type. It has a max input power of 37 dBm and a gain of 15 dB. This amplifier operates within a frequency range of 0 MHz to 3000 MHz and is suitable for various RF and microwave applications.
Qorvo's TGA4521 is a GaAs RF amplifier with 16dB gain, operating from 32-45 GHz. It handles up to 20 dBm CW input power and requires a 6V supply. Ideal for wideband medium-power applications in RF and microwave systems.
CA70-2
M/a-com Technology Solutions
CA70-2 by M/a-com Technology Solutions is a wide band low power RF amplifier with 7 dB gain. It operates b/w 10-250 MHz, handling up to 13 dBm CW input power. With a VSWR of 2.1, it's ideal for applications requiring coaxial construction in temperatures ranging from 0-50°C.
AC1226
Teledyne Technologies
WIDE BAND LOW POWER; Minimum Operating Frequency: 10 MHz; Additional Features: I/P POWER-MAX (PEAK)=27DBM; Maximum Operating Frequency: 1200 MHz; Minimum Operating Temperature: -55 Cel; Characteristic Impedance: 50 ohm;
TGA2578-CP
TGA2578-CP by Qorvo is a GAN technology RF amplifier with 26 dB gain, operating from 2-6 GHz. It has a max input power of 25 dBm and VSWR of 10, suitable for wideband high-power applications. This module features -2.8V/28V power supplies, surface mounting, and requires 400mA supply current.
HMC963LC4TR-R5
Analog Devices' HMC963LC4TR-R5 is a wide band low power RF amplifier with 16.5 dB gain, operating frequency range of 6-26.5 GHz, and 50 ohm impedance. It features PHEMT technology, ceramic package, and can handle up to 0 dBm input power. Ideal for RF & microwave applications requiring high performance in compact designs.
ADL8106ACEZ
WIDE BAND LOW POWER;
HMC6981LS6
Analog Devices' HMC6981LS6 is a wide band high power RF amplifier with 23 dB gain, operating from 15-20 GHz. It has a max input power of 18 dBm and operates on a 5.5V supply, drawing up to 1100 mA. Ideal for applications requiring high power amplification in the RF & Microwave domain.
MGA-81563-TR2G
Broadcom's MGA-81563-TR2G is a GAAS RF amplifier with 10.5 dB gain, operating from 100 MHz to 6 GHz. It has a max input power of 13 dBm and VSWR of 2, suitable for wideband low-power applications in temperatures ranging from -40°C to 85°C. The component features surface mounting and requires a 3V power supply with a max current draw of 51 mA.
HMC451LP3E by Analog Devices is a GAAS RF amplifier with 12.5 dB gain, operating from 5V supply at frequencies ranging from 5-18000 MHz. With a max input power of 10 dBm, it is ideal for wide band low power applications in RF and microwave systems requiring surface mount components.
MGA-62563-TR2G
Broadcom's MGA-62563-TR2G is a GAAS RF amplifier with 20.4 dB gain, operating from 100 MHz to 3000 MHz. It has a max input power of 21 dBm and VSWR of 2, suitable for wideband low-power applications in RF and microwave systems. The component features a plastic/epoxy package, matte tin terminals, and operates on 3/5V supplies.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MMG3014NT1
NXP Semiconductors
WIDE BAND MEDIUM POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Minimum Operating Frequency: 40 MHz;
Freescale Semiconductor
WIDE BAND MEDIUM POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Power Supplies (V): 5;
MMG3H21NT1
WIDE BAND MEDIUM POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Body Material: PLASTIC/EPOXY; Package Equivalence Code: TO-243; No. of Functions: 1;
WIDE BAND MEDIUM POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Body Material: PLASTIC/EPOXY; Package Equivalence Code: TO-243; Maximum Supply Current: 110 mA;
MMG3002NT1
WIDE BAND LOW POWER; Maximum Operating Frequency: 3600 MHz; Gain: 19.3 dB; Maximum Input Power (CW): 12 dBm; JESD-609 Code: e3; Minimum Operating Frequency: 40 MHz;
Motorola
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Package Equivalence Code: TO-243;
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Maximum Input Power (CW): 12 dBm;
MMG3006NT1
WIDE BAND HIGH POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Construction: COMPONENT;
WIDE BAND HIGH POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Maximum Supply Current: 960 mA;
MMG3013NT1
MMG3014N
NARROW BAND HIGH POWER; Maximum Operating Frequency: 2170 MHz; Characteristic Impedance: 50 ohm; Gain: 15 dB; Minimum Operating Frequency: 2110 MHz; Maximum Voltage Standing Wave Ratio: 5;
MMG3015NT1
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; No. of Functions: 1;
MMG3003NT1
MMG3003NT1 by NXP Semiconductors is a RF & Microwave Amplifier with 15 dBm CW input power, 19.3 dB gain, and 6.2V power supply. It operates from 40 MHz to 3600 MHz, ideal for wide band medium power applications requiring surface mounting feature.
MMG3008NT1
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Maximum Input Power (CW): 10 dBm;
MMG3009NT1
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Minimum Operating Frequency: 0 MHz;
MMG3004NT1
MMG3004NT1 by NXP Semiconductors is a RF & Microwave Amplifier with 18 dBm CW input power, 15 dB gain, and 400-2200 MHz frequency range. It is a wide band medium power device suitable for various applications requiring a 50 ohm characteristic impedance and surface mounting feature.
MMG3010NT1
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Characteristic Impedance: 50 ohm;
MMG3007NT1
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Terminal Finish: Matte Tin (Sn);
MMG3001NT1
MMG3001NT1 by NXP Semiconductors is a RF & Microwave Amplifier with 10 dBm CW input power, 1.17 VSWR, and 18 dB gain. It operates from 40 MHz to 3600 MHz, ideal for wide band low power applications. This component has a characteristic impedance of 50 ohms and requires a 5.6V power supply with a max current draw of 300 mA.
MMG3011NT1
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Terminal Finish: MATTE TIN;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved