Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Package Equivalence Code: TO-243;
Median Price
$3.860
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
$2.940
1k+ parts
$2.630
10k+ parts
$2.470
Verical
$3.862
$3.288
$3.087
DigiKey
Digiode
$3.097
Nova Conductors
$3.341
Vyrian
Anansix
Bristol Electronics
ComSIT Distribution GmbH
Corohmni
$1.731
Aztec Data Supply Inc.
$1.780
Ampacity Inc.
$2.770
Semicontronic
$2.701
$2.687
One Stop Electronics
Corphita
$2.934
Continental Prestige Electronics
$3.274
Argo Parts USA
QUARKTWIN TECHNOLOGY LTD
A-Z Elektronik GmbH
Authorized Procurement Solutions
Perfect Parts
Assy Fe
UNI Independent Distributors
Metaverse IC Inc.
Kepictronics
Robosynatics
Lucentia Tech
Netroflash
$3.174
$3.107
RF & Microwave Amplifiers MMG3002NT1 attributes and parameters. Explore more RF & Microwave Amplifiers devices from Motorola
Characteristic Impedance:
Construction:
Gain:
Maximum Input Power (CW):
Mounting Feature:
No. of Functions:
No. of Terminals:
Maximum Operating Frequency:
Minimum Operating Frequency:
Package Body Material:
Package Equivalence Code:
Power Supplies (V):
RF or Microwave Device Type:
Sub-Category:
Maximum Supply Current:
Technology:
Motorola Solutions, Inc., is an American video equipment, telecommunications equipment, software, systems and services provider that succeeded Motorola, Inc., following the spinoff of the mobile phone division into Motorola Mobility in 2011. The company is headquartered in Chicago, Illinois.
2N2222A
Microsemi
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 30; No. of Elements: 1;
LM358M
Raytheon Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
1N4148
Vishay Intertechnology
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
LM358N
Taejin Technology
OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
BAV99
Won-top Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
Itt Semiconductor
2N7002
Jiangsu Changjiang Electronics Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Operating Mode: ENHANCEMENT MODE; Transistor Application: SWITCHING;
ABS10-32.768KHZ-T
Abracon
Abracon's ABS10-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and wearables due to its compact size and low power consumption.
LM317T
Texas Instruments
LM317T by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. With a max output current of 1.5A, this through-hole package regulator is ideal for power supply designs where adjustable voltage levels are needed.
1N4148WS
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Leshan Radio
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Forward Voltage (VF): .5 V;
Nte Electronics
OHN3020U
Tt Electronics Plc
OHN3020U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 5mT. It features an output range of 25mA and operates in temperatures ranging from -20 to 85°C. Ideal for applications requiring precise detection and measurement of magnetic fields, such as automotive sensors or industrial automation systems.
LL4148
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 50 V; Qualification: Not Qualified;
Daco Semiconductor
STM32F103C8T6
STMicroelectronics
STM32F103C8T6 by STMicroelectronics is a 32-bit microcontroller with 48 terminals, operating at up to 16 MHz. It features 10-Ch 12-Bit ADC channels and 7 DMA channels, suitable for industrial applications requiring low power consumption and high-speed connectivity via CAN, I2C(2), SPI(2), USART(3), USB.
L7805CV
L7805CV by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in electronic circuits.
HMC7950LS6TR
Analog Devices
Analog Devices' HMC7950LS6TR is a wide band low power RF amplifier with 13 dB gain, operating from 2-28 GHz. It can handle up to 20 dBm CW input power and operates b/w -40°C to +85°C. Ideal for RF & microwave applications requiring high frequency amplification in a compact form factor.
GALI-21+
Mini-circuits
GALI-21+ by Mini-circuits is a wideband low power RF amplifier with 11.5 dB gain, suitable for frequencies from 0 to 8000 MHz. It has a max input power of 15 dBm and VSWR of 2.5, making it ideal for RF and microwave applications requiring compact surface-mount components.
HMC475ST89ETR
Hittite Microwave
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Terminal Finish: Matte Tin (Sn);
MSA-1105-TR1
Hewlett Packard
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Minimum Operating Temperature: -25 Cel;
MGA-81563
Broadcom
Broadcom's MGA-81563 is a GAAS RF amplifier with 6 terminals, operating from -40°C to 85°C. It requires 3V power supply, draws max 51mA current, and has a surface mount package. Ideal for applications requiring high-frequency signal amplification in various electronic devices.
MAR-8ASM+
MAR-8ASM+ by Mini-circuits is a wide band low power RF amplifier with 20 dB gain. It operates from 0 to 1000 MHz, handling up to 13 dBm CW input power. Ideal for RF & microwave applications, it features a compact surface mount package and operates in temperatures ranging from -40°C to 85°C.
HMC451LC3
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Maximum Input Power (CW): 10 dBm;
TGA2214-CP
Qorvo
WIDE BAND HIGH POWER;
SMA3107-TL-E
Sanyo Semiconductor
WIDE BAND LOW POWER;
HMC1053
WIDE BAND HIGH POWER; Terminal Finish: Gold (Au); JESD-609 Code: e4;
HMC451LP3ETR
HMC451LP3ETR by Analog Devices is a GAAS RF amplifier with 12.5 dB gain, operating from 5V supply at frequencies ranging from 5-18 GHz. With a max input power of 10 dBm, it's ideal for wideband low-power applications in RF and microwave systems requiring surface mount components.
HMC549MS8GTR
Analog Devices' HMC549MS8GTR is a GaAs technology RF amplifier with 5V power supply, operating b/w -40°C to 85°C. It features wideband low power performance in a surface mount package, ideal for RF and microwave applications.
MGA-62563-TR1G
Broadcom's MGA-62563-TR1G is a GAAS RF amplifier with 20.4 dB gain, operating from 100 MHz to 3 GHz. It has a max input power of 21 dBm and VSWR of 2, suitable for wideband low-power applications in RF and microwave systems. The component features a plastic/epoxy package, surface mounting, and requires 3-5V power supply with a max current draw of 77 mA.
HMC634LC4
WIDE BAND LOW POWER; Construction: COMPONENT; Minimum Operating Temperature: -40 Cel; Maximum Input Power (CW): 10 dBm; Maximum Operating Temperature: 85 Cel; Minimum Operating Frequency: 5000 MHz;
MAX2659ELT/V+
Analog Devices' MAX2659ELT/V+ is a BICMOS RF amplifier with 16.5 dB gain and 50 ohm impedance. It operates at temperatures from -40 to 85 °C, with a max input power of 10 dBm. Ideal for narrow band low power applications, it has a compact surface mount package with 6 terminals.
MGA-72543-TR2G
Broadcom's MGA-72543-TR2G is a GAAS RF amplifier with 9.2 dB gain, operating from 100 MHz to 6 GHz. It has a max input power of 20 dBm and VSWR of 2.1, suitable for wideband low-power applications in RF and microwave systems.
HMC-AUH312-SX
Analog Devices' HMC-AUH312-SX is a wide band low power RF amplifier with 8 dB gain and 10 dBm CW input power. Operating from 500 MHz to 80 GHz, it's ideal for RF & microwave applications requiring high performance in temperatures ranging from -55°C to 85°C.
MMZ25332BT1
NXP Semiconductors
NXP Semiconductors' MMZ25332BT1 is a RF amplifier with 5V power supply, 12 terminals, and 412mA max supply current. It features bipolar technology, wide band medium power for surface mount applications in RF & microwave systems.
MGA-62563-TR2G
Agilent Technologies
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Package Equivalence Code: TSSOP6,.08;
GALI-6
The Mini-circuits GALI-6 is a wide band low power RF amplifier with 10 dB gain and 50 ohm impedance. It operates from 0 to 4000 MHz, handling up to 20 dBm CW input power. Ideal for surface mount applications in RF & microwave systems, it offers VSWR of 2 and operates b/w -45°C to +85°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MMG3014NT1
WIDE BAND MEDIUM POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Minimum Operating Frequency: 40 MHz;
Freescale Semiconductor
WIDE BAND MEDIUM POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Power Supplies (V): 5;
MMG3H21NT1
WIDE BAND MEDIUM POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Body Material: PLASTIC/EPOXY; Package Equivalence Code: TO-243; No. of Functions: 1;
WIDE BAND MEDIUM POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Body Material: PLASTIC/EPOXY; Package Equivalence Code: TO-243; Maximum Supply Current: 110 mA;
MMG3002NT1
WIDE BAND LOW POWER; Maximum Operating Frequency: 3600 MHz; Gain: 19.3 dB; Maximum Input Power (CW): 12 dBm; JESD-609 Code: e3; Minimum Operating Frequency: 40 MHz;
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Maximum Input Power (CW): 12 dBm;
MMG3006NT1
WIDE BAND HIGH POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Construction: COMPONENT;
WIDE BAND HIGH POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Maximum Supply Current: 960 mA;
MMG3013NT1
MMG3014N
NARROW BAND HIGH POWER; Maximum Operating Frequency: 2170 MHz; Characteristic Impedance: 50 ohm; Gain: 15 dB; Minimum Operating Frequency: 2110 MHz; Maximum Voltage Standing Wave Ratio: 5;
MMG3015NT1
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; No. of Functions: 1;
MMG3003NT1
MMG3003NT1 by NXP Semiconductors is a RF & Microwave Amplifier with 15 dBm CW input power, 19.3 dB gain, and 6.2V power supply. It operates from 40 MHz to 3600 MHz, ideal for wide band medium power applications requiring surface mounting feature.
MMG3008NT1
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Maximum Input Power (CW): 10 dBm;
MMG3009NT1
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Minimum Operating Frequency: 0 MHz;
MMG3004NT1
MMG3004NT1 by NXP Semiconductors is a RF & Microwave Amplifier with 18 dBm CW input power, 15 dB gain, and 400-2200 MHz frequency range. It is a wide band medium power device suitable for various applications requiring a 50 ohm characteristic impedance and surface mounting feature.
MMG3010NT1
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Characteristic Impedance: 50 ohm;
MMG3007NT1
MMG3001NT1
MMG3001NT1 by NXP Semiconductors is a RF & Microwave Amplifier with 10 dBm CW input power, 1.17 VSWR, and 18 dB gain. It operates from 40 MHz to 3600 MHz, ideal for wide band low power applications. This component has a characteristic impedance of 50 ohms and requires a 5.6V power supply with a max current draw of 300 mA.
MMG3011NT1
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Construction: COMPONENT;
WIDE BAND MEDIUM POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Power Supplies (V): 6.2;
Motorola
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved