Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TRF37D73IDSGT by Texas Instruments is a wide band low power RF amplifier with 20dB gain, operating from 1MHz to 6GHz. It has a max input power of 10dBm and operates on a 3.3V supply with a current draw of 65mA. Ideal for applications requiring high frequency amplification in compact designs.
Median Price
$1.581
Lifecycle Status
Suppliers In-Stock
11
In-Stock Inventory
1k+
Texas Instruments
1+ parts
$1.158
100+ parts
$0.956
1k+ parts
$0.517
10k+ parts
-
Arrow
$0.727
Chip1Stop
DigiKey
$1.810
$1.349
Mouser Electronics
$1.880
$1.380
$1.170
$0.975
Verical
Nova Conductors
$0.814
Digiode
$1.100
Vyrian
Chip Stock
Semi Source
Ampacity Inc.
$0.620
Semicontronic
$0.604
$0.601
Aranea Global
$0.798
$0.766
Continental Prestige Electronics
Argo Parts USA
Advanced Electronics
$0.974
$0.886
$0.799
Corohmni
$0.979
Corphita
$1.042
Parana Technologies
$1.562
$2.206
DigiPath Technology Company
$1.720
ChromeModa Solutions
$1.755
$1.439
IDEA Electronic Components Group
$1.580
Authorized Procurement Solutions
Robosynatics
Lucentia Tech
$0.485
The use of plastic/epoxy as the package body material makes the amplifier lightweight and durable, suitable for various applications.
With a maximum input power of 10 dBm, this amplifier can handle moderate power levels effectively without risking damage to the device.
The component construction ensures high reliability and consistent performance over time, making the amplifier a reliable choice for RF and microwave applications.
Operating at a low voltage of 3.3V, this amplifier is energy-efficient and can be easily integrated into various systems.
The amplifier has 8 terminals for easy connectivity, making it versatile and compatible with different circuit configurations.
With a maximum operating temperature of 85°C, this amplifier can withstand high temperatures, ensuring stable performance in demanding environments.
The ability to operate at temperatures as low as -40°C makes this amplifier suitable for use in cold environments without sacrificing performance.
The nickel palladium gold finish on the terminals ensures good conductivity and corrosion resistance, enhancing the amplifier's reliability and longevity.
Operating with a maximum supply current of 65 mA, this amplifier is efficient and minimizes power consumption while delivering high performance.
Being a wideband low power device, this amplifier is suitable for applications requiring broad frequency coverage and low power consumption.
With a characteristic impedance of 50 ohm, this amplifier is compatible with standard RF systems and ensures efficient signal transfer.
Offering a gain of 20 dB, this amplifier can amplify weak signals effectively, enhancing signal strength and improving overall system performance.
With a minimum operating frequency of 1 MHz, this amplifier is versatile and can be used in various applications that require low-frequency operation.
The surface mount feature allows for easy and secure installation on circuit boards, saving space and simplifying the assembly process.
Capable of operating at frequencies up to 6000 MHz, this amplifier is ideal for high-frequency applications where signal amplification is needed.
RF & Microwave Amplifiers TRF37D73IDSGT attributes and parameters. Explore more RF & Microwave Amplifiers devices from Texas Instruments
Characteristic Impedance:
Construction:
Gain:
Maximum Input Power (CW):
JESD-609 Code:
Mounting Feature:
No. of Functions:
No. of Terminals:
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Power Supplies (V):
RF or Microwave Device Type:
Maximum Supply Current:
Terminal Finish:
TRF37D73IDSGT RF & Microwave trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.33.00.01
SB
8542.33.00.00
PCN Design/Specification - Mult Dev Material Chg 29/Mar/2018
Texas Instruments Inc. (TI) is one of the world's leading semiconductor companies and a global leader in analog and digital signal processing technology. The company has had a major impact on the electronics industry for over 80 years, manufacturing integrated circuits (ICs), software and subsystems that leverage high-performance computing capabilities. It offers an extensive portfolio of solutions for a wide range of industries, from aerospace to medical devices and consumer products to communication systems. Over its long history, TI has become synonymous with quality, reliability and innovation. Today, TI is one of the largest semiconductor companies in the world with operations in more than 30 countries across six continents.
President, CEO
Haviv Ilan
Chairman
Richard K. Templeton
Senior VP, CFO
Rafael R. Lizardi
M - Fab
Fabrication
Fab Initiation
1997
USA
South Portland
Wafer Capacity
32,000
D - FAB
1966
Dallas
42,000
D MOS - 6
2002
25,000
D MOS - 5
1995
75,000
Miho - 8
1980
Japan
Inashiki
43,000
S FAB 1
Sherman
91,000
F - FAB
2001
Germany
Freising
37,000
R Fab 1
2010
Richardson
40,000
D HC Line
1999
2,000
JV3
Aizu Wakamatsu
45,000
C - FAB
2007
China
Chengdu
30,000
L - Fab
2015
Lehi
70,000
R - Fab 2
2022
S - FAB 2
2025
S - FAB 3
2028
CRCW06031K00FKEAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
BAV99
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
Onsemi
BSS138
Siemens
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain-Source On Resistance: 3.5 ohm; Terminal Finish: Tin/Lead (Sn/Pb);
TCA6424ARGJR
TCA6424ARGJR by Texas Instruments is a CMOS parallel I/O port with 24 bits and 3 ports. It operates b/w -40 to 85°C, suitable for industrial applications. With a max clock frequency of 0.4 MHz, it offers low power consumption at only 0.03 mA supply current.
LL4148
Continental Device India
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
0460-202-16141
TE Connectivity
TE Connectivity's 0460-202-16141 contact features a crimp terminal type, machined contact design, and rated AC voltage of 1500V. With a wire gauge range of 20-16 AWG, it is ideal for applications requiring a male round pin-socket contact style in assembly products.
LM555CM
LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.
Rectron
ULN2003ADR
ULN2003ADR by Texas Instruments is a NPN BJT with 7 elements, max IC of 0.5A, and VCEsat of 1.6V. Ideal for switching applications in small outline packages with Gull Wing terminals.
Bytesonic Electronics
EEAGA1H4R7
Panasonic
Panasonic EEAGA1H4R7 is a 4.7uF, 50V Aluminum Electrolytic Capacitor with 0.1 Tan Delta and 0.003mA Leakage Current. Ideal for applications requiring high ripple current handling in temperatures ranging from -55 to 105°C.
2N2222A
Baneasa S A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; Qualification: Not Qualified;
LM107H/883
Linear Technology
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
1N4148
Weitron Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb);
LD1117S33CTR
STMicroelectronics
STMicroelectronics LD1117S33CTR is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It operates within an input voltage range of 4.75V to 15V, making it suitable for various applications requiring stable voltage regulation in compact designs. The device features low dropout voltage of 1.3V, high temperature operation up to 125°C, and small outline package style for space-constrained PCB layouts.
LM317T
Tt Electronics Plc
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Qualification Status: Not Qualified; JESD-30 Code: R-PSFM-T3;
Taitron Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
Panjit International
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
HMC606LC5TR
Hittite Microwave
WIDE BAND LOW POWER; Characteristic Impedance: 50 ohm; Maximum Operating Temperature: 85 Cel; Maximum Input Power (CW): 15 dBm; Maximum Operating Frequency: 18000 MHz; Minimum Operating Temperature: -40 Cel;
MMG3002NT1
Freescale Semiconductor
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Maximum Input Power (CW): 12 dBm;
HELA-10
Mini-circuits
HELA-10 by Mini-circuits is a wideband medium power RF amplifier with 9.5 dB gain, operating from 50 MHz to 1000 MHz. It has a max input power of 20 dBm and VSWR of 1.22, making it suitable for various RF and microwave applications requiring high performance amplification in a compact surface-mount package.
TQP7M9106
Qorvo
Qorvo's TQP7M9106 is a wide band high power RF amplifier with 19 dB gain, operating from 50 MHz to 1500 MHz. It can handle up to 30 dBm CW input power and has a max VSWR of 10. Ideal for applications requiring high power amplification in RF & microwave systems.
QPL9547TR7
QPL9547TR7 by Qorvo is a wide band low power RF amplifier with 17.5 dB gain, operating from 100 MHz to 6000 MHz. It has a max input power of 22 dBm and VSWR of 1.54, suitable for surface mount applications in RF & microwave systems requiring high performance amplification.
AG303-86G
The Qorvo AG303-86G is a wide band low power RF amplifier with 20.4 dB gain, operating from 0 to 6000 MHz. It has a max input power of 10 dBm and operates on a 5V power supply. Ideal for RF applications requiring high gain in the -40°C to 85°C temperature range.
SPF5043Z
Qorvo's SPF5043Z is a GAAS RF amplifier with 11.4 dB gain, operating from 50 MHz to 4000 MHz. It has a max input power of 25 dBm and requires a 5V power supply, making it ideal for wideband low-power applications in RF and microwave systems. The component is designed for surface mounting with a characteristic impedance of 50 ohms.
HMC462-SX
Analog Devices
HMC462-SX by Analog Devices is a PHEMT technology RF amplifier with 12.5 dB gain, operating from 2-20 GHz. It has a max input power of 18 dBm and VSWR of 1.25, making it ideal for wideband low-power applications in RF and microwave systems. With a compact surface-mount construction and requiring only 5V supply voltage, it offers high performance in a small form factor.
MGA-53543-BLKG
Broadcom
Broadcom's MGA-53543-BLKG is a wide band low power RF amplifier with 14 dB gain. Operating from 50 MHz to 6 GHz, it handles up to 13 dBm CW input power and has a VSWR of 2. Ideal for RF applications requiring a compact component with a characteristic impedance of 50 ohms.
LMV221SDX/NOPB
National Semiconductor
RF/Microwave Amplifiers; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Terminal Finish: Matte Tin (Sn); Maximum Operating Temperature: 85 Cel;
HMC441LP3ETR
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Terminal Finish: Matte Tin (Sn);
TRF37A75IDSGT
TRF37A75IDSGT by Texas Instruments is a wide band low power RF amplifier with 12 dB gain and 50 ohm impedance. It operates from 40 MHz to 6 GHz, handling up to 10 dBm CW input power. Ideal for applications requiring surface mount components in RF and microwave systems.
MGA-82563-BLKG
Broadcom's MGA-82563-BLKG is a GAAS RF amplifier with 8.8 dB gain, operating from 100 MHz to 6 GHz. It has a max input power of 13 dBm and VSWR of 1.2, suitable for wideband low-power applications in RF and microwave systems. The component is surface-mountable with a max supply current of 101 mA and operates b/w -40°C to 85°C.
MW7IC008NT1
NXP Semiconductors
The NXP Semiconductors MW7IC008NT1 is a MOS technology RF amplifier with 2 functions, offering a gain of 21.5 dB and operating frequency range from 100 MHz to 1000 MHz. It has a max input power of 38 dBm and VSWR of 10, suitable for wideband high-power applications in RF and microwave systems. The component comes in a plastic/epoxy package with matte tin finish, featuring 24 terminals for surface mount installation at a power supply of 28V.
HMC462LP5
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Maximum Operating Frequency: 20000 MHz;
TCBT-14+
TCBT-14+ by Mini-circuits is a wide band low power RF amplifier with max input power of 30 dBm and VSWR of 1.5. Operating from 10 MHz to 10 GHz, it's ideal for RF & microwave applications requiring high performance in a compact form factor. With gold over nickel finish, it ensures reliable operation in temperatures ranging from -40°C to 85°C.
HMC478ST89E
Analog Devices' HMC478ST89E is a wide band low power RF amplifier with 11 dB gain and 50 ohm impedance. It operates from 0 to 4000 MHz, handling up to 5 dBm CW input power. This component is ideal for RF and microwave applications requiring surface mount technology in temperatures ranging from -40°C to 85°C.
MGA-62563-BLKG
Agilent Technologies
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Power Supplies (V): 3/5;
MGA-61563-TR1G
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Maximum Operating Frequency: 6000 MHz;
GALI-51F+
GALI-51F+ by Mini-circuits is a wide band low power RF amplifier with 14 dB gain, operating from 0 to 4000 MHz. It has a max input power of 13 dBm and VSWR of 1.7, suitable for RF & microwave applications requiring high performance in a compact package. The component is constructed using bipolar technology and can operate in temperatures ranging from -45 to 85°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DRV8316RRGFR
DRV8316RRGFR by Texas Instruments is a motion control IC with a rectangular package and a terminal form of gull wing. It has a max output current of 8A and can operate at temperatures ranging from -40 to 125°C. This IC is commonly used as a brushless DC motor controller in automotive applications.
DS160PT801ACBR
DS160PT801ACBR by Texas Instruments is a bus controller IC with 339 terminals, operating at -40 to 85°C. It supports PCI bus compatibility with a data transfer rate of 2000 MBps. This CMOS technology device has a thin profile and fine pitch package suitable for industrial applications.
DRV3255EPAPRQ1
DRV3255EPAPRQ1 by Texas Instruments is a Motion Control IC with 64 terminals, operating at -40 to 150°C. It is an AEC-Q100 compliant automotive-grade IC for Brushless DC Motor control, supporting supply voltages from 5V to 90V and output currents up to 3.5A. The package style includes a flatpack with heat sink/slug, suitable for surface mount applications in automotive systems.
CC2662R1FTWRGZRQ1
CC2662R1FTWRGZRQ1 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU, 48 MHz clock frequency, and 81920 bytes of RAM. Ideal for industrial applications, it features 8 ADC channels, 32 DMA channels, and peripherals like AES and PWM for efficient system integration.
TPS7A4301DGQR
TPS7A4301DGQR by Texas Instruments is an adjustable positive single output LDO regulator with a max output voltage of 14.5V and a dropout voltage of 0.6V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
UCC27284DRCR
UCC27284DRCR by Texas Instruments is a MOSFET gate driver with 2 channels, capable of handling a max output current of 3.5A. It operates in automotive-grade temperatures (-40 to 125°C) and has a turn-on/off time of 30µs. This chip carrier package with very thin profile is suitable for high side driver applications requiring fast switching speeds.
LMR43610MSC3RPERQ1
LMR43610MSC3RPERQ1 by Texas Instruments is a 9-terminal switching regulator with a max output voltage of 32V and max output current of 1A. Ideal for automotive applications, it operates b/w -40 to 150°C, featuring a buck switcher config and PWM control mode at up to 2200kHz frequency.
TRF37C73IDSGT
TRF37C73IDSGT by Texas Instruments is a wide band low power RF amplifier with 18dB gain, operating from 1MHz to 6GHz. It has a max input power of 10dBm and operates on a 3.3V supply, suitable for applications requiring high frequency amplification in RF systems. The component comes in an 8-terminal plastic/epoxy package for surface mounting, making it ideal for various RF and microwave applications.
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Maximum Input Power (CW): 10 dBm; Minimum Operating Frequency: 40 MHz;
TRF37A75IDSGR
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Power Supplies (V): 5; Minimum Operating Temperature: -40 Cel;
TRF37B75IDSGR
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Minimum Operating Temperature: -40 Cel; Gain: 15 dB;
TRF37B75IDSGT
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; No. of Functions: 1; JESD-609 Code: e4;
TRF37C73IDSGR
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Maximum Supply Current: 65 mA; Maximum Input Power (CW): 10 dBm;
TRF37C75IDSGR
TRF37C75IDSGR by Texas Instruments is a wide band low power RF amplifier with 18 dB gain and 50 ohm impedance. It operates from 40 MHz to 4000 MHz, suitable for various RF applications. With a max input power of 10 dBm, it is ideal for amplifying signals in the frequency range while maintaining low power consumption.
TRF37C75IDSGT
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Minimum Operating Frequency: 40 MHz; Maximum Operating Temperature: 85 Cel;
TRF37D73IDSGR
TRF37D73IDSGR by Texas Instruments is a wide band low power RF amplifier with 20 dB gain and 50 ohm impedance. It operates from 1 MHz to 6 GHz, with max input power of 10 dBm. Suitable for applications requiring high frequency amplification in compact designs.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved