Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SCR; Surface Mount: NO; Repetitive Peak Off-state Voltage: 500 V; Maximum Holding Current: 20 mA; Maximum DC Gate Trigger Voltage: 1.5 V; Non Repetitive Peak On-state Current: 110 A;
Median Price
$0.378
Lifecycle Status
Suppliers In-Stock
38
In-Stock Inventory
1k+
Tomark Electronics Ltd
1+ parts
$0.220
100+ parts
-
1k+ parts
10k+ parts
Nova Conductors
$0.266
Freelance Electronics
TME
$0.825
$0.274
$0.206
Chip Stock
Cyclops Electronics Ltd
Rapid Electronics
$0.430
$0.427
VNN
ABC Electronics Ltd.
Huijzer Components
Halfin
Digiode
Anansix
LWI Electronics Inc
Micros
$0.193
ComSIT Distribution GmbH
ComSIT USA
Vyrian
Tech-Mark Corp
Cogito LLC
Bristol Electronics
Q Components
ACDS - Activité Composants Distribution Service
Euro-Tech
Standard Data Resources
Fibra_Brandt Electronic GMBH
Prism Electronics
MRC Electronics
SOS electronic
$0.600
$0.560
Pegasus Components GmbH
Whistler Technology
Holdelec - ElecDif-Pro
Ack Elektronik San.Tic.Ltd.Sti
LittleDiode
Rebound Electronics
ECAB
Specialty Parts & Electronic Components, Inc. (S.P.E.C.)
Kallista Electronics Ltd
Bastille Electronics
$0.253
$0.240
$0.237
Continental Prestige Electronics
$0.261
Argo Parts USA
$0.258
Aztec Data Supply Inc.
$2.710
One Stop Electronics
$6.100
AZTECH Wire
$11.212
Perfect Parts
Kepictronics
Authorized Procurement Solutions
Lixinc
S.R.D Solutions
Corphita
UNI Independent Distributors
Alle Elektronik GmbH
Cyclops Electronics Ltd (Excess)
GreenTree Electronics
Silicon Controlled Rectifiers (SCR) BT151-500R attributes and parameters. Explore more Silicon Controlled Rectifiers (SCR) devices from North American Philips Discrete Products Div
Nominal Circuit Commutated Turn-off Time:
Minimum Critical Rate of Rise of Off-state Voltage:
Maximum DC Gate Trigger Current:
Maximum DC Gate Trigger Voltage:
Maximum Holding Current:
JESD-609 Code:
Maximum Leakage Current:
Non Repetitive Peak On-state Current:
Maximum On-state Voltage:
Maximum On-state Current:
Maximum Operating Temperature:
Repetitive Peak Off-state Voltage:
Sub-Category:
Surface Mount:
Terminal Finish:
Trigger Device Type:
BT151-500R Triggering Devices trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
LL4148
Micronas Semiconductor Holding Ag
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .2 A; Maximum Forward Voltage (VF): 1.2 V;
1552200253
Molex
WIRE AND CABLE;
USBLC6-2SC6
STMicroelectronics
USBLC6-2SC6 by STMicroelectronics is a unidirectional transient voltage suppressor diode with a breakdown voltage of 6V. It has a max clamping voltage of 17V and operates in temperatures ranging from -40 to 125°C. This device, with dual terminals and matte tin finish, is ideal for protecting sensitive electronics from voltage spikes in various applications.
IRLML6402TRPBF
Infineon Technologies
IRLML6402TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 20V DS Breakdown Voltage, 22A IDM, and 0.065 ohm RDS(on). With a small outline package and matte tin finish, it operates in temperatures from -55 to 150 °C.
1N4148
Weitronic Enterprise
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM358N
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
BAV99
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Ksl Microdevices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
International Devices
NXP Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Operating Temperature: 150 Cel;
Renesas Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Yangzhou Yangjie Electronics
RC0402FR-0710KL
Yageo
Yageo's RC0402FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance, suitable for applications requiring a rated power dissipation of 0.0625 W. With a temperature coefficient of 100 ppm/°C, it operates b/w -55 to 155 °C, making it ideal for various electronic circuits.
STM32H753IIK6
STM32H753IIK6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and peripherals like CAN, ETHERNET, and USB. Ideal for industrial applications requiring high-speed processing and extensive connectivity options.
LM7805CT
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Min): 0 Cel; Technology: BIPOLAR;
Onsemi
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
Shandong Yiguang Electronic Joint Stock
LM555CM
Harris Semiconductor
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM317LMX/NOPB
Texas Instruments
LM317LMX/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max input-output voltage differential of 40V. It operates in temperatures ranging from -40°C to 125°C and has a max output current of 0.1A, making it suitable for various applications requiring precise voltage regulation.
MCO50-12IO1
Littelfuse
The Littelfuse MCO50-12IO1 SCR has a max DC gate trigger current of 80mA, repetitive peak reverse voltage of 1200V, and max RMS on-state current of 85A. Ideal for applications requiring high power control in industrial settings with temp range -40 to 150°C.
C106D1
SCR; Surface Mount: NO; Repetitive Peak Off-state Voltage: 400 V; Minimum Operating Temperature: -40 Cel; Maximum Leakage Current: .1 mA; Maximum DC Gate Trigger Current: .2 mA;
2N2323
Space Power Electronics
SCR; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Maximum DC Gate Trigger Voltage: .8 V; Maximum Leakage Current: .1 mA;
BT151-650R
Ween Semiconductors
SCR; Package Style (Meter): FLANGE MOUNT; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SINGLE; Case Connection: ANODE;
TD120N16SOFHPSA1
Infineon's TD120N16SOFHPSA1 is a 1600V SCR with 190A RMS current, ideal for high-power applications. Featuring a built-in diode, it has a max DC gate trigger current of 100mA. With an operating temp range from -40 to 125°C, it is suitable for industrial power control systems.
JANTX2N2323AS
Unitrode
SCR; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; No. of Terminals: 3;
MCD501-18IO2
SCR;
MCC44-18IO8B
The Littelfuse MCC44-18IO8B is a SCR with max DC Gate Trigger Current of 100mA, Non Repetitive Peak On-state Current of 1200A, and Max RMS On-state Current of 80A. It's used in applications requiring high current switching capabilities like industrial power control systems.
40TPS12PBF
Vishay Semiconductors
SCR; Package Style (Meter): FLANGE MOUNT; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SINGLE; Qualification: Not Qualified;
40TPS12APBF
Vishay Intertechnology
40TPS12APBF by Vishay Intertechnology is a single SCR with max. DC gate trigger current of 40mA, non-repetitive peak on-state current of 600A, and max. on-state current of 35A. It is used in applications requiring high power control such as industrial motor drives and power supplies due to its high voltage handling capabilities up to 1200V.
MCR100-8
SCR; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; Maximum DC Gate Trigger Current: .2 mA;
MCC255-16IO1
MCC255-16IO1 by Littelfuse is a Silicon Controlled Rectifier with 2 elements, max on-state current of 250A, and trigger voltage of 2V. Ideal for applications requiring high current handling such as industrial power control systems. Operating temp range from -40 to 130°C makes it versatile for various environments.
MCD501-16IO2
CS20-12IO1
CS20-12IO1 by Littelfuse is a single SCR with 1200V repetitive peak reverse voltage, 220A non-repetitive peak on-state current, and 65mA max DC gate trigger current. Ideal for applications requiring high power control in industrial settings.
F18107SDK1400
Cynergy3 Components
SCR; Package Style (Meter): FLANGE MOUNT; Surface Mount: NO; Terminal Position: UPPER; Configuration: SERIES CONNECTED, CENTER TAP, 2 ELEMENTS; Case Connection: ISOLATED;
2N2323 by Texas Instruments is a Silicon Controlled Rectifier with max DC Gate Trigger Current of 0.2 mA, Non Repetitive Peak On-state Current of 15 A, and Max On-state Current of 1.6 A. It is used in applications requiring SCR trigger devices with operating temperatures ranging from -65 to 125 °C.
2N690
SCR; Package Style (Meter): POST/STUD MOUNT; Surface Mount: NO; Terminal Position: UPPER; Configuration: SINGLE; Case Connection: ANODE;
VS-25TTS12STRL-M3
VS-25TTS12STRL-M3 by Vishay Intertechnology is a Silicon Controlled Rectifier with 1200V peak reverse voltage, 25A RMS on-state current, and 45mA DC gate trigger current. Ideal for applications requiring SCR technology in compact spaces with surface mount capability.
SKT100/08DUNF
Semikron International
SKT100/08DUNF by Semikron International is a single SCR with max on-state current of 100A and max DC gate trigger current of 150mA. It has a non-repetitive peak on-state current of 2000A, making it suitable for high-current applications. With a max operating temperature of 130°C, it is ideal for industrial power control systems.
TD320N18SOFHPSA1
Infineon's TD320N18SOFHPSA1 SCR has 1800V repetitive peak reverse voltage, 520A max RMS on-state current, and 150mA DC gate trigger current. Ideal for applications requiring high power control in industrial settings with temperatures ranging from -40°C to 130°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
BT151S-800R,118
BT151S-800R,118 by NXP Semiconductors is a Silicon Controlled Rectifier with 15mA DC Gate Trigger Current, 100A Non Repetitive Peak On-state Current, and 7.5A Max On-state Current. It is used in applications requiring SCR technology for power control circuits due to its high current capabilities and small outline package style.
SCR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: SINGLE; Configuration: SINGLE; Case Connection: ANODE;
BT151-500R,127
BT151-500R,127 by NXP Semiconductors is a single SCR with max. on-state current of 7.5A and max. DC gate trigger voltage of 1.5V. It has a package style of flange mount and is ideal for applications requiring high power control in industrial settings due to its high repetitive peak reverse voltage of 500V and max operating temperature of 125°C.
BT151-500RT,127
SCR; Surface Mount: NO; Maximum On-state Current: 8 A; Maximum On-state Voltage: 1.75 V; Maximum DC Gate Trigger Voltage: 1.5 V; Non Repetitive Peak On-state Current: 132 A;
The NXP Semiconductors BT151-500RT,127 is a Silicon Controlled Rectifier with max on-state voltage of 1.75V and max DC gate trigger current of 15mA. It has a non-repetitive peak on-state current of 132A, making it ideal for applications requiring high power switching capabilities at temperatures ranging from -40 to 150°C.
BT152-600R,127
BT151-650R,127
BT151-500R
Philips Semiconductors
SCR; Surface Mount: NO; Repetitive Peak Off-state Voltage: 500 V; Maximum On-state Voltage: 1.7 V; Nominal Circuit Commutated Turn-off Time: 70 us; Minimum Critical Rate of Rise of Off-state Voltage: 50 V/us;
New Jersey Semiconductor Products
BT151-500RT
North American Philips Discrete Products Div
SCR; Surface Mount: NO; Maximum On-state Current: 7.5 A; Maximum Operating Temperature: 110 Cel; Maximum DC Gate Trigger Voltage: 1.5 V; JESD-609 Code: e0;
BT151-500
Unisonic Technologies
SCR; Package Style (Meter): FLANGE MOUNT; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SINGLE; Package Shape: RECTANGULAR;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved