Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SCR; Surface Mount: NO; Maximum On-state Current: 7.5 A; Maximum Operating Temperature: 110 Cel; Maximum DC Gate Trigger Voltage: 1.5 V; JESD-609 Code: e0;
Median Price
$0.243
Lifecycle Status
Suppliers In-Stock
25
In-Stock Inventory
1k+
Nova Conductors
1+ parts
$0.290
100+ parts
-
1k+ parts
10k+ parts
Maritex
$1.130
$0.970
$0.910
American Microsemiconductor Inc.
$8.150
Chip Stock
Digiode
VNN
Micros
$0.197
ComSIT Distribution GmbH
Partservice
$0.163
Micros sp.j. W. Kędra i J. Lic
$0.175
Halfin
Huijzer Components
Vyrian
Goldney Electronics S.L.
Anansix
ECAB
LIBRA Elektronik GmbH
Bristol Electronics
LittleDiode
J2 Sourcing AB
Resion
Digital Electronic Gebert Verwaltungs UG
Holdelec - ElecDif-Pro
Kallista Electronics Ltd
GES GmbH
Continental Prestige Electronics
$0.284
Argo Parts USA
$0.281
Netroflash
$0.275
$0.270
AZTECH Wire
$19.159
One Stop Electronics
$26.100
A-Z Elektronik GmbH
Kepictronics
UNI Independent Distributors
Lixinc
Corphita
Alle Elektronik GmbH
Perfect Parts
Cyclops Electronics Ltd (Excess)
Assy Fe
Computer Components Inc. - USA
Silicon Controlled Rectifiers (SCR) BT151-650R attributes and parameters. Explore more Silicon Controlled Rectifiers (SCR) devices from North American Philips Discrete Products Div
Minimum Critical Rate of Rise of Off-state Voltage:
Maximum DC Gate Trigger Current:
Maximum DC Gate Trigger Voltage:
Maximum Holding Current:
JESD-609 Code:
Maximum Leakage Current:
Non Repetitive Peak On-state Current:
Maximum On-state Voltage:
Maximum On-state Current:
Maximum Operating Temperature:
Repetitive Peak Off-state Voltage:
Sub-Category:
Surface Mount:
Terminal Finish:
Trigger Device Type:
BT151-650R Triggering Devices trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
2N2222A
SPC TECHNOLOGY/ MULTICOMP
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
BAV99
Secos
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .6 A; JEDEC-95 Code: TO-92;
ABS25-32.768KHZ-T
Abracon
Abracon's ABS25-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency, such as IoT devices and precision timing systems in industrial settings.
LFXTAL025159REEL
Iqd Frequency Products
LFXTAL025159REEL by IQD Frequency Products is a 32.768 kHz crystal oscillator with 20 ppm frequency tolerance and 40,000 ohm series resistance. It is ideal for applications requiring precise timekeeping, such as real-time clocks in IoT devices or microcontrollers in wearables. The surface-mount design with a drive level of 1 uW makes it suitable for compact electronic systems.
MBRS360T3G
Onsemi
MBRS360T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.63V and a max output current of 3A. It is designed for applications requiring high-speed switching and low power loss, making it suitable for use in various electronic devices.
4554
Jw Miller Magnetics
Other Semiconductors;
CRG0805F10K
TE Connectivity
TE Connectivity's CRG0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in various electronic circuits due to its compact size and high temperature rating.
ABS07-32.768KHZ-T
Abracon ABS07-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring 0.032768 MHz frequency precision in a compact surface-mount design with gold over nickel finish.
SMBJ18CA
Changzhou Starsea Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Semitron
Daco Semiconductor
1N4148
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Config: SINGLE;
ABS25-32.768KHZ-1-T
Abracon's ABS25-32.768KHZ-1-T crystal oscillator offers 10 ppm frequency tolerance, 126% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal operating frequency, such as IoT devices and precision timing systems.
BSS138PS,115
Nexperia
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 2; No. of Terminals: 6; Minimum DS Breakdown Voltage: 60 V;
2N7002
Weitron Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Terminal Finish: TIN LEAD; Maximum Operating Temperature: 150 Cel;
Fairchild Semiconductor
Goodwork Semiconductor
BSS138
Diodes Incorporated
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Minimum DS Breakdown Voltage: 50 V; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
MCD162-16IO1
Littelfuse
The Littelfuse MCD162-16IO1 SCR has a max DC gate trigger current of 150mA, non-repetitive peak on-state current of 6000A, and max repetitive peak reverse voltage of 1600V. Ideal for applications requiring high current switching capabilities in industrial equipment or power control systems.
MMO110-12IO7
The Littelfuse MMO110-12IO7 is a Silicon Controlled Rectifier (SCR) with a max DC Gate Trigger Current of 100 mA. It has a configuration of ANTI-PARALLEL, 2 ELEMENTS and can handle a max On-state Current of 51 A. This SCR is commonly used in applications that require high voltage control and switching capabilities.
CS19-08HO1S-TUB
CS19-08HO1S-TUB by Littelfuse is a Silicon Controlled Rectifier with 1.31V On-state Voltage, 28mA DC Gate Trigger Current, and 195A Non Repetitive Peak On-state Current. Ideal for applications requiring SCR technology in circuits with up to 800V Reverse Voltage, it operates b/w -40°C to 100°C temperatures efficiently.
M50-100-1-2-F-V
Sensata Technologies
The Sensata Technologies M50-100-1-2-F-V is a Silicon Controlled Rectifier with 150 mA DC Gate Trigger Current and 1500 A Non Repetitive Peak On-state Current. It features a common cathode configuration, suitable for applications requiring up to 100 A Max On-state Current. The device operates in temperatures ranging from -40°C to 125°C, making it ideal for various industrial and power control systems.
VS-40TPS12LHM3
Vishay Intertechnology
SCR; Peak Reflow Temperature (C): NOT SPECIFIED; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
MCO150-12IO1
The Littelfuse MCO150-12IO1 SCR has a max DC gate trigger current of 150mA, repetitive peak reverse voltage of 1200V, and max RMS on-state current of 234A. Ideal for applications requiring high power control in industrial settings with temp range -40 to 150°C.
IXYS Corporation
SCR; Package Style (Meter): FLANGE MOUNT; Surface Mount: NO; Terminal Position: UPPER; Configuration: SINGLE; Case Connection: ISOLATED;
2N2323
Asi Semiconductor
SCR; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; Package Shape: ROUND;
P131
International Rectifier
SCR; Package Style (Meter): FLANGE MOUNT; Surface Mount: NO; Terminal Position: UPPER; Configuration: BRIDGE; Case Connection: ISOLATED;
TD240N32KOFHPSA1
Infineon Technologies
TD240N32KOFHPSA1 by Infineon Technologies is a Silicon Controlled Rectifier with 3200V repetitive peak reverse voltage and 700A max RMS on-state current. It has a trigger current of 250mA, making it suitable for high-power applications requiring precise gate control. The SCR comes in a rectangular package style with built-in diode, ideal for flange mount installations in industrial settings.
2N2323AS
Vpt Components
SCR; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; Maximum Operating Temperature: 125 Cel;
70TPS16
SCR; Package Style (Meter): IN-LINE; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SINGLE; JESD-609 Code: e0;
MMO175-12IO7
The Littelfuse MMO175-12IO7 is a Silicon Controlled Rectifier with 2 elements in anti-parallel configuration. It has a max on-state current of 80A, repetitive peak reverse voltage of 1200V, and max DC gate trigger current of 100mA. Ideal for applications requiring high power control in industrial settings.
JANTX2N2323AS
Cobham Plc
SCR; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; Reference Standard: MIL;
TIC116S
Texas Instruments
TIC116S by Texas Instruments is a Silicon Controlled Rectifier with 20mA DC Gate Trigger Current, 80A Non Repetitive Peak On-state Current, and 5A Max On-state Current. It is used in applications requiring precise current control such as motor drives, lighting controls, and power supplies.
VHF15-08IO5
SCR; Package Style (Meter): FLANGE MOUNT; Surface Mount: NO; Terminal Position: UPPER; Configuration: BRIDGE, HALF-CONTROLLED, COMMON CATHODE WITH BUILT-IN FREE-WHEELING DIODE; Case Connection: ISOLATED;
JAN2N2323S
2N1595
Raytheon Semiconductor
SCR; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; Maximum DC Gate Trigger Current: 10 mA;
New England Semiconductor
SCR; Surface Mount: NO; Maximum Operating Temperature: 125 Cel; Terminal Finish: Tin/Lead (Sn/Pb); Maximum On-state Current: 1.6 A; JESD-609 Code: e0;
N2500VC160
IXYS Corporation's N2500VC160 SCR has a 1600V repetitive peak reverse voltage, 4985A max RMS on-state current, and 300mA DC gate trigger current. Ideal for high-power applications requiring reliable switching capabilities in a single configuration with surface mount option.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
BT151S-800R,118
NXP Semiconductors
BT151S-800R,118 by NXP Semiconductors is a Silicon Controlled Rectifier with 15mA DC Gate Trigger Current, 100A Non Repetitive Peak On-state Current, and 7.5A Max On-state Current. It is used in applications requiring SCR technology for power control circuits due to its high current capabilities and small outline package style.
Ween Semiconductors
SCR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: SINGLE; Configuration: SINGLE; Case Connection: ANODE;
BT151-500R,127
SCR; Package Style (Meter): FLANGE MOUNT; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SINGLE; Case Connection: ANODE;
BT151-500R,127 by NXP Semiconductors is a single SCR with max. on-state current of 7.5A and max. DC gate trigger voltage of 1.5V. It has a package style of flange mount and is ideal for applications requiring high power control in industrial settings due to its high repetitive peak reverse voltage of 500V and max operating temperature of 125°C.
BT151-500RT,127
SCR; Surface Mount: NO; Maximum On-state Current: 8 A; Maximum On-state Voltage: 1.75 V; Maximum DC Gate Trigger Voltage: 1.5 V; Non Repetitive Peak On-state Current: 132 A;
The NXP Semiconductors BT151-500RT,127 is a Silicon Controlled Rectifier with max on-state voltage of 1.75V and max DC gate trigger current of 15mA. It has a non-repetitive peak on-state current of 132A, making it ideal for applications requiring high power switching capabilities at temperatures ranging from -40 to 150°C.
BT152-600R,127
BT151-650R,127
BT151-500R
North American Philips Discrete Products Div
SCR; Surface Mount: NO; Repetitive Peak Off-state Voltage: 500 V; Maximum Holding Current: 20 mA; Maximum DC Gate Trigger Voltage: 1.5 V; Non Repetitive Peak On-state Current: 110 A;
Philips Semiconductors
SCR; Surface Mount: NO; Repetitive Peak Off-state Voltage: 500 V; Maximum On-state Voltage: 1.7 V; Nominal Circuit Commutated Turn-off Time: 70 us; Minimum Critical Rate of Rise of Off-state Voltage: 50 V/us;
Comset Semiconductors
New Jersey Semiconductor Products
BT151-500RT
BT151-650R
BT151-650
Unisonic Technologies
SCR; Package Style (Meter): FLANGE MOUNT; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SINGLE; Package Shape: RECTANGULAR;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved