Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
National Semiconductor's 5962-8968801FA is a MIL-STD-883 screened CMOS multiplexer with 4 functions, 2 inputs, and 9ns propagation delay at 5V. With a ceramic package and tin lead finish, it operates b/w -55 to 125°C for military applications.
Median Price
$24.000
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
Bristol Electronics
1+ parts
100+ parts
-
1k+ parts
10k+ parts
VNN
Anansix
Vyrian
Digiode
Nova Conductors
Mil-Aero Solutions, Inc.
Microfarads
Resion
AZTECH Wire
$16.508
Semicontronic
$44.000
$42.900
$42.680
Ampacity Inc.
Continental Prestige Electronics
Argo Parts USA
Bastille Electronics
Corphita
The ceramic and glass-sealed body material ensures durability and reliability in various operating conditions, making this product a good choice for long-term use.
With a nominal supply voltage of 5V, this multiplexer & demultiplexer is compatible with standard power supplies, making it easy to integrate into existing systems.
The high maximum operating temperature of 125°C allows this product to perform reliably in a wide range of environmental conditions, making it suitable for industrial and military applications.
Utilizing CMOS technology ensures low power consumption and high noise immunity, making this multiplexer & demultiplexer energy-efficient and reliable in signal processing applications.
Multiplexer & Demultiplexer 5962-8968801FA attributes and parameters. Explore more Multiplexer & Demultiplexer devices from National Semiconductor
Family:
JESD-30 Code:
JESD-609 Code:
Length:
Load Capacitance (CL):
Logic IC Type:
Maximum I (ol):
No. of Functions:
No. of Inputs:
No. of Outputs:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Polarity:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Power Supplies (V):
Propagation Delay At Nominal Supply:
Propagation Delay (tpd):
Qualification:
Screening Level:
Maximum Seated Height:
Sub-Category:
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage / Vsup (V):
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
5962-8968801FA Logic ICs trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
National Semiconductor was an American semiconductor manufacturer which specialized in analog devices and subsystems, formerly with headquarters in Santa Clara, California. The company produced power management integrated circuits, display drivers, audio and operational amplifiers, communication interface products and data conversion solutions. National's key markets included wireless handsets, displays and a variety of broad electronics markets, including medical, automotive, industrial and test and measurement applications.On September 23, 2011, the company formally became part of Texas Instruments as the "Silicon Valley" division.
1N4148
Vishay Intertechnology
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
ABS06-32.768KHZ-T
Abracon
Abracon's ABS06-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 90000 ohm series resistance, and -40 to 85 °C operating temperature range. Ideal for applications requiring precise timing in compact designs like IoT devices and wearables.
2N2222A
Raytheon Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Minimum DC Current Gain (hFE): 100; Maximum Turn On Time (ton): 35 ns;
2N7002
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Moisture Sensitivity Level (MSL): 1; Maximum Operating Temperature: 150 Cel;
M39029/58-360
Glenair
CONNECTOR ACCESSORY; Contact Gender: MALE; Material: COPPER ALLOY; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT; MIL Conformity: YES;
1N4148WS
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138W-7-F
Multicomp Pro
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Transistor Element Material: SILICON; No. of Elements: 1;
SMBJ18CA
Secos
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MC7805CTG
Onsemi
MC7805CTG by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation. The package style is flange mount with through-hole terminals, ensuring easy installation and reliability in diverse electronic designs.
C1210C104K5RACTU
KEMET Corporation
KEMET C1210C104K5RACTU is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics and ±10% tolerance, suitable for surface mount applications in a wide temperature range from -55°C to 125°C. Its compact rectangular package makes it ideal for various electronic devices.
LM358N
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Synsemi
LM107H/883
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Average Bias Current (IIB): .1 uA;
BAV99
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
International Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
LM358MX
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
ULN2803A
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;
ROHM
LM317T
Integrated Power Semiconductors
Other Regulators; No. of Terminals: 3; Operating Temperature (TJ-Min): 0 Cel; Terminal Pitch: 2.54 mm; Maximum Load Regulation (%): 1.5 %; Nominal Dropout Voltage-1: 3 V;
RC0603FR-071KL
Yageo
Yageo's RC0603FR-071KL is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 155 °C with a temperature coefficient of 100 ppm/°C.
SN54HC258J
Texas Instruments
SN54HC258J by Texas Instruments is a 4-function multiplexer with 2 inputs, operating at a supply voltage of 5V. It features a propagation delay of 35ns and can handle load capacitance up to 150pF. Ideal for military-grade applications requiring fast signal switching in compact spaces.
SN74LS257BN
MULTIPLEXER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR;
TF4512AJ
TF4512AJ by Texas Instruments is a CMOS multiplexer with 8 inputs, 750 ns propagation delay, and 3-STATE output. Ideal for military applications due to its MIL temperature grade, -55 to 125 °C operating range, and ceramic package body material.
SN74S153DR
SN74S153DR by Texas Instruments is a TTL technology multiplexer/demultiplexer with 2 functions and 4 inputs. It operates at a supply voltage range of 4.75V to 5.25V, has a propagation delay of 9ns, and can handle load capacitance up to 15pF. This small outline package is suitable for commercial temperature grade applications requiring true output polarity control.
SN74298J4
SN74298J4 by Texas Instruments is a TTL multiplexer with 4 functions and 2 inputs. Operating at 5V, it has 16 terminals in an in-line package style. Ideal for commercial applications, it has a temperature range of 0-70°C and ceramic package body material.
SN74LS158NSRE4
SN74LS158NSRE4 by Texas Instruments is a TTL multiplexer with 4 functions and 2 inputs. It has a propagation delay of 15 ns at 5V, making it suitable for applications requiring fast switching speeds. With a small outline package style and surface mount capability, it is ideal for compact electronic designs.
PI3USB102GZLEX
Diodes Incorporated
PI3USB102GZLEX by Diodes Inc. is a 10-terminal multiplexer with 3-STATE output, operating b/w -40 to 85°C. With a supply voltage range of 3-5.5V, it's ideal for industrial applications requiring low-profile chip carrier packaging and quad terminal positioning.
SN74LS257J
SN74LS257J by Texas Instruments is a TTL multiplexer with 4 functions and 2 inputs. It has a propagation delay of 30 ns at 5V, operates b/w 0-70°C, and supports a max power supply current of 10mA. Ideal for commercial applications requiring high-speed data switching in an inline package style.
SN74CBT3257DE4
SN74CBT3257DE4 by Texas Instruments is a 4-function multiplexer with 3-STATE output. It operates at a supply voltage of 5V, has a propagation delay of 0.35ns, and can withstand temperatures from -40 to 85°C. This CMOS technology device is ideal for industrial applications requiring precise signal routing in compact spaces.
74HC151PW-Q100,118
NXP Semiconductors
NXP Semiconductors' 74HC151PW-Q100,118 is an AEC-Q100 rated multiplexer with 8 inputs and 16 terminals. It operates at a nominal voltage of 5V, has a propagation delay of 56ns, and can handle load capacitance of 50pF. Ideal for automotive applications due to its CMOS technology and wide temperature range from -40°C to 125°C.
SN54HC604FH
The Texas Instruments SN54HC604FH is an 8-function CMOS multiplexer with 2 inputs, operating b/w -55°C to 125°C. It features a chip carrier package style with 28 terminals and offers 3-STATE output characteristics. Ideal for military-grade applications requiring high temperature tolerance and precise signal routing in compact spaces.
FSAL200MTCX
Fairchild Semiconductor
MULTIPLEXER AND DEMUX/DECODER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR;
SN74HC257D
SN74HC257D by Texas Instruments is a 4-function, 2-input multiplexer with a propagation delay of 25ns. Operating at a supply voltage of 5V, it features a small outline package style and industrial temperature grade suitability. Ideal for applications requiring high-speed signal switching in compact designs.
74HC157D
MULTIPLEXER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
CD4512BM96E4
CD4512BM96E4 by Texas Instruments is a CMOS multiplexer/demultiplexer with 8 inputs, 360 ns propagation delay at 5V. It operates in a temperature range of -55 to 125°C and has a small outline package suitable for military applications.
TC74HC153AF(F)
Toshiba
Toshiba's TC74HC153AF(F) is a CMOS multiplexer/demultiplexer with 2 functions, 4 inputs, and 16 terminals. It has a propagation delay of 38ns at 2/6V supplies, operating b/w -40 to 85°C. Suitable for industrial applications due to its gull wing terminal form and small outline package style.
74HC151PW,118
Nexperia
MULTIPLEXER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR;
CD40257BM
CD40257BM by Texas Instruments is a 4-function, 2-input multiplexer with a propagation delay of 140ns at 5V. It operates in temperatures ranging from -55 to 125°C and has a max supply voltage of 18V. Ideal for military-grade applications requiring high-speed signal switching in compact designs.
NTE74LS251
Nte Electronics
NTE74LS251 by Nte Electronics is an 8-input multiplexer with a 5V supply voltage, 45ns propagation delay, and 3-STATE output. Ideal for commercial applications, it operates b/w 0 to 70°C temperature range and has a max power supply current of 12mA.
SN74CBT3251D
SN74CBT3251D by Texas Instruments is a CMOS multiplexer/demultiplexer with 8 outputs. It has a propagation delay of 0.24 ns and operates at a nominal voltage of 5V. This device is commonly used in industrial applications due to its small outline package and high temperature tolerance.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
5962-8968801FA
MULTIPLEXER; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 16; Package Code: QFF; Package Shape: RECTANGULAR;
Defense Logistics Agency
MULTIPLEXER; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 16; Package Code: DFP; Package Shape: RECTANGULAR;
Qp Semiconductor
Teledyne E2v (Uk)
5962-9065201MEA
Harris Semiconductor
MULTIPLEXER; Temperature Grade: MILITARY; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR;
Military Specifications
MULTIPLEXER; Temperature Grade: MILITARY; Terminal Form: THROUGH-HOLE; Package Code: DIP; Maximum Seated Height: 5.08 mm; Maximum Operating Temperature: 125 Cel;
Intersil
MULTIPLEXER; Temperature Grade: MILITARY; Terminal Form: THROUGH-HOLE; Package Code: DIP; Terminal Position: DUAL; Maximum Supply Voltage (Vsup): 5.5 V;
5962-0050601QEX
5962-0050901QFX
5962-00-532-0551
5962-00-543-2299
5962-00-430-2641
5962-0050601QFA
5962-00-581-4270
5962-01-004-3921
5962-00-277-0188
5962-8968801FX
National Semiconductor
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved