Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 73415-5720 RF SMP Connector features 0.75 dB insertion loss, 50 ohm impedance, and 40 GHz max operating frequency. Ideal for board mounting in applications requiring high-frequency signal transmission with a temperature range of -65 to 165°C.
Median Price
-
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
1k+
VNN
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Netsource Technology, Inc.
Digiode
Sea View Technologies
Bristol Electronics
Nova Conductors
AZTECH Wire
$6.930
Aztec Data Supply Inc.
$8.954
Andel Nordic
$51.530
$36.073
Continental Prestige Electronics
GreenTree Electronics
Argo Parts USA
Corphita
Bastille Electronics
Low insertion loss helps maintain signal integrity and reduces signal degradation, making this product a good choice for high-frequency applications.
With a high maximum operating frequency of 40 GHz, this product is suitable for use in high-frequency RF applications.
The SMP connector type is known for its high performance and reliability in RF applications, making this product a good choice for critical connections.
Compact body depth allows for space-saving installation, making this product suitable for applications where size constraints are a concern.
Surface mount termination type simplifies installation and allows for easy integration onto circuit boards, making this product a convenient choice for manufacturing processes.
Other Function RF Connectors 73415-5720 attributes and parameters. Explore more Other Function RF Connectors devices from Molex
Additional Features:
Body Depth:
Body or Shell Style:
Characteristic Impedance:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Coupling Type:
Insertion Loss:
Insulator Material:
Mounting Style:
Mounting Type:
Maximum Operating Frequency:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Panel Mount:
Shell Finish:
Shell Material:
Termination Type:
Total No. of Contacts:
Voltage Standing Wave Ratio:
73415-5720 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
BSS84-7-F
Diodes Incorporated
Diodes Inc. BSS84-7-F is a P-channel FET with 50V DS breakdown voltage, 0.13A max drain current, and 10 ohm RDS(on). Ideal for switching applications, it features a single configuration with built-in diode in a small outline package. Operating in enhancement mode at up to 150°C, it has Gull Wing terminals and matte tin finish.
SMBJ18CA
Jiangsu Jiejie Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N2222A
Dionics-usa
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Excel (Suzhou) Semiconductor
PIC18F4550T-I/PT
Microchip Technology
The Microchip Technology PIC18F4550T-I/PT microcontroller operates at a max clock frequency of 48 MHz with 8-bit architecture. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it suitable for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this device offers efficient performance in compact designs.
2N7002
Rectron
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel; Terminal Form: GULL WING;
Semiconductor Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BSS138BKW,115
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Terminal Finish: TIN; No. of Terminals: 3; Additional Features: LOGIC LEVEL COMPATIBLE;
LM358N
Kec
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
North American Philips Discrete Products Div
Bytesonic Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Position: DUAL; Minimum Operating Temperature: -55 Cel;
BAV99
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Formosa Microsemi
ESD5Z5.0T1G
Onsemi
ESD5Z5.0T1G by Onsemi is a unidirectional Trans Voltage Suppressor Diode with 5V reverse test voltage and 174W peak power dissipation. It is used for transient suppression in electronic circuits, meeting IEC-61000-4-2, 4-4 standards and UL recognized for reliability.
Transys Electronics
BSS138
Siemens
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain-Source On Resistance: 3.5 ohm; Terminal Finish: Tin/Lead (Sn/Pb);
Harris Semiconductor
Boca Semiconductor
920-255P-51P
Amphenol
Amphenol 920-255P-51P RF Connector has 0.432" body diameter, 0.467" depth, and operates up to 6 GHz. With SNAP coupling type, it's a 50 ohm plug connector for boards with male solder termination. Operating from -65°C to 165°C, it ensures VSWR of 2 in various RF applications.
861V509ER6
Winchester Interconnect
861V509ER6 by Winchester Interconnect is a threaded RF connector with a max operating temperature of 65°C and a min operating temperature of -40°C. It has a characteristic impedance of 75 ohm and can handle frequencies up to 3 GHz. This connector is commonly used in applications requiring high-frequency signal transmission, such as telecommunications and wireless communication systems.
SMP-MSLD-PCS-16
RF SMP CONNECTOR;
5-1814826-3
TE Connectivity
TE Connectivity 5-1814826-3 RF Connector features threaded coupling, polypropylene insulator, and nickel shell finish. With 75 ohm impedance and RG 6 cable compatibility, it is ideal for commercial applications up to 2 GHz frequency range. The panel mount connector has a durability of 50 cycles and operates b/w -55°C to 85°C temperatures.
222141
Amphenol 222141 RF Connector features threaded coupling, polypropylene insulator, and bright tin contact finish. Ideal for board mounting with solder termination, this connector is commonly used in various RF applications.
1-330723-2
TE Connectivity 1-330723-2 RF Connector features bayonet coupling, PTFE insulator, and brass shell. With 50 ohm impedance, it operates up to 2 GHz frequency. Ideal for commercial applications requiring durable connectors with a rated current of 2A.
82_MMBX-S50-0-3/111_NE
Huber+suhner Ag
82_MMBX-S50-0-3/111_NE RF connector by Huber+suhner Ag features a characteristic impedance of 50 ohm, max operating frequency of 12.4 GHz, and VSWR of 1.5. Ideal for board mounting applications, this female jack connector with snap coupling is designed for high-frequency signal transmission in electronic systems.
85-1
The Amphenol 85-1 RF Connector features a low insertion loss of 0.8 dB and a voltage standing wave ratio of 1.1, suitable for applications up to 11 GHz. With a snap coupling type and PTFE insulator material, it is designed for use in high-frequency cable connections with a characteristic impedance of 50 ohms. Operating temperatures range from -40°C to 85°C, making it versatile for various environments.
M-P-10-1
Hirose Electric
Hirose Electric's M-P-10-1 RF Connector is a threaded plug with Tetrafluoride insulator material. It operates at a max frequency of 0.2 GHz, suitable for cable mounting with solder termination. Ideal for applications requiring reliable male connectors in straight mounting style.
7702-13
Kings Electronics
RF F CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Maximum Operating Frequency: .5 GHz; Termination Contact Finish: GOLD NICKEL; Mating Contact Finish: GOLD;
SF1521-60061
Sv Microwave
SF1521-60061 by Sv Microwave is a 50 ohm RF CONNECTOR with gold (Au) - nickel (Ni) finish. It has a max frequency of 40 GHz and features ULTEM insulator material. Ideal for panel mount applications, this threaded connector is designed for high-frequency signal transmission in various electronic systems.
96_MMPX-50-0-2/111_NM-1
96_MMPX-50-0-2/111_NM-1 by Huber+suhner Ag is a threaded RF connector with a body diameter of 0.138" and depth of 0.154". It has a max operating frequency of 67 GHz, characteristic impedance of 50 ohm, and can withstand temperatures from -65 to 155 °C. Ideal for commercial applications requiring durable, high-frequency connections.
HRMJ-U.FLP-ST1(40)
OTHER RF CONNECTOR; Reliability: COMMERCIAL; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED;
SMP-FR-C08-1
RF SMP CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
1065-1QD
RF CONNECTOR; Manufacturer Series: 1065-1QD;
142-1002-0001
Malco Microdot Uk
RF CONNECTOR; Contact Gender: MALE; Body or Shell Style: PLUG; Panel Mount: NO; Mounting Type: CABLE; Manufacturer Series: SLIDE-ON;
1909763-1
TE Connectivity 1909763-1 RF Connector has a body size of 0.118" x 0.118" x 0.049", with SNAP coupling, and liquid crystal polymer insulator. It operates b/w -40°C to 90°C, has characteristic impedance of 50 ohm, and supports up to 6 GHz frequency. Ideal for commercial applications requiring reliable board-mounted male coaxial connectors.
1-1393662-2
TE Connectivity 1-1393662-2 RF Connector features 50 ohm impedance, 200M ohm insulation resistance, and 1.22 VSWR. Ideal for board and panel mounting in applications up to 2 GHz frequency, with DIN conformance and solder termination.
CJT-T-P-HH-RA-TH1
Samtec
Samtec's CJT-T-P-HH-RA-TH1 RF connector features gold termination, 0.428" body depth, and snap coupling. Ideal for commercial applications, it offers 100 ohm impedance and operates up to 4 GHz frequency. This male coaxial jack with solder termination is designed for board mounting with locking option.
MS-147(06)
MS-147(06) by Hirose Electric is a 50 ohm RF connector with a body length of 0.228 inch and a body width of 0.213 inch. It has an insertion loss of 0.4 dB and can operate at temperatures ranging from -30 to 85 °C. This connector is commonly used in commercial applications requiring reliable, high-frequency connections up to 6 GHz.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
73412-0110
Molex
Molex 73412-0110 RF Connector features 50 ohm impedance, 6 GHz frequency, and 90VAC dielectric voltage. Ideal for commercial applications, it offers a durable design with gold nickel finish and liquid crystal polymer insulator for reliable performance in temperatures ranging from -40 to 90°C.
73412-0114
Molex 73412-0114 RF Connector has a Voltage Standing Wave Ratio of 1.3, SNAP coupling type, and male contact gender. Ideal for surface mount board applications in various electronic devices.
73415-5030
Molex 73415-5030 is an RF SMP connector with a characteristic impedance of 50 ohm. It has a max operating frequency of 40 GHz and is suitable for use in commercial applications.
73415-5120
RF SMP CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Type: CABLE; Body or Shell Style: JACK; Panel Mount: NO;
73415-3310
RF SMP CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Insertion Loss: .1 dB; Contact Material: BRASS;
73415-3320
RF SMP CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Body Length: .236 inch; Maximum Operating Frequency: 40 GHz;
73415-5032
RF SMP CONNECTOR; Option: WITH CABLE ASSEMBLY; Contact Gender: FEMALE; Termination Type: CRIMP; Mating Contact Finish: NOT SPECIFIED; Body Length: .4 inch;
73415-3030
RF SMP CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Contact Style: COAX; Insertion Loss: .1 dB;
73415-3593
RF SMP CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 700VAC; Shell Finish: GOLD; Mounting Type: BOARD;
734160010
RF CONNECTOR;
73415-3032
RF SMP CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Depth: .26 inch; Rated Current - Signal: 1.2 A; Minimum Operating Temperature: -65 Cel;
73415-3592
RF SMP CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Coupling Type: SNAP; Panel Mount: NO; Body Depth: .2 inch;
73415-3590
RF SMP CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Total No. of Contacts: 1; Mounting Style: STRAIGHT; Body or Shell Style: PLUG;
73415-3591
RF SMP CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Characteristic Impedance: 50 ohm; Coupling Type: SNAP;
73415-5310
RF SMP CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Contact Finish: NOT SPECIFIED; Shell Finish: GOLD; Shell Material: BRASS;
73415-5740
RF SMP CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Minimum Operating Temperature: -65 Cel; Maximum Operating Temperature (Cel): 165; Body Length: .25 inch;
73415-5300
Molex 73415-5300 RF SMP Connector has a characteristic impedance of 50 ohm, operates up to 40 GHz, and features a gold shell finish. Ideal for high-frequency applications requiring surface mount termination on boards due to its female contact gender and straight mounting style.
73415-5741
RF SMP CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Body or Shell Style: PLUG; Contact Material: NOT SPECIFIED; Maximum Operating Temperature (Cel): 165;
73415-5721
RF SMP CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Contact Finish: NOT APPLICABLE; Minimum Operating Temperature: -65 Cel; Maximum Operating Frequency: 40 GHz;
73415-5730
RF SMP CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Body Depth: .146 inch; Mounting Style: STRAIGHT; Termination Type: SURFACE MOUNT;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved