Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Amphenol's SMP-MSCM-PCT-2 RF connector features a 50 ohm characteristic impedance, 6 GHz max operating frequency, and gold shell finish. Ideal for board mounting in commercial applications, it offers a durability of 500 cycles with a temperature range from -65 to 165°C.
Median Price
$15.709
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
Arrow
1+ parts
100+ parts
$12.139
1k+ parts
$11.378
10k+ parts
DigiKey
$16.970
$12.258
$10.943
-
Mouser Electronics
$12.390
$11.580
Powell Electronics
$9.670
$9.040
Master Electronics
$10.050
$8.940
Verical
Nova Conductors
IBS Electronics
$15.736
Gateway Technologies
$4.000
$3.560
Singapore Electronics
$4.400
$4.092
$3.916
$3.740
Ampacity Inc.
$8.220
Authorized Procurement Solutions
Netroflash
Compact size allows for easy installation in tight spaces.
Gold finish ensures high conductivity and corrosion resistance.
Low profile design for a sleek appearance.
Snap coupling for quick and easy connection.
High-quality insulator materials for reliable performance.
Suitable for high temperature environments.
Operational even in extreme low temperatures.
Gold finish for enhanced durability and conductivity.
Specifically designed for RF applications, ensuring optimum performance.
Low VSWR for efficient signal transmission.
Reliable and long-lasting performance with 500 cycle durability.
Board mounting for secure and stable installation.
Standard impedance for RF connectors, ensuring compatibility.
Durable brass shell for longevity and reliable performance.
Solder termination for secure and stable connections.
Low withdrawal force for easy disconnection.
Female contact for compatibility with male connectors.
Receptacle design for easy insertion and removal of connectors.
Straight mounting style for simple and direct installation.
Coaxial contact style for efficient signal transmission.
High insertion force for secure connections.
Locking mounting option for added security and stability.
High frequency capability for versatile applications.
Suitable for commercial use with reliable performance.
Other Function RF Connectors SMP-MSCM-PCT-2 attributes and parameters. Explore more Other Function RF Connectors devices from Amphenol
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Characteristic Impedance:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Style:
Coupling Type:
DIN Conformance:
Durability:
Filter Feature:
IEC Conformity:
Maximum Insertion Force (N):
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Ports:
Maximum Operating Frequency:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Panel Mount:
Reliability:
Shell Finish:
Shell Material:
Sub-Category:
Termination Type:
Total No. of Contacts:
Voltage Standing Wave Ratio:
Minimum Withdrawal Force (N):
SMP-MSCM-PCT-2 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
2N7002,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): 30; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
FDD5614P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 42 W; Terminal Position: SINGLE; Terminal Form: GULL WING;
1N4148
Terry Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V;
2N2222A
Digitron Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
OPA2277UA
Texas Instruments
OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.
SMBJ18CA
Multicomp Pro
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Diode Element Material: SILICON; Technology: AVALANCHE; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V;
BAV99W-7-F
Diodes Incorporated
Diodes Incorporated BAV99W-7-F is a fast recovery rectifier diode with 2 elements in series connected, center tap configuration. It has a max reverse recovery time of 0.004 us and can handle a max output current of 0.15 A. Ideal for applications requiring fast switching capabilities and operating temperatures ranging from -65 to 150 °C.
2N7002
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 40; Minimum DS Breakdown Voltage: 60 V;
FDC5614P
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; Transistor Application: SWITCHING; Maximum Drain Current (ID): 3 A;
Dc Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JEDEC-95 Code: TO-236AB; Qualification: Not Qualified; Package Style (Meter): SMALL OUTLINE;
LM555CM
National Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Baneasa S A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; Qualification: Not Qualified;
SS14
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MC7805CTG
Onsemi
MC7805CTG by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation. The package style is flange mount with through-hole terminals, ensuring easy installation and reliability in diverse electronic designs.
Daco Semiconductor
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
BSS84-7-F
Diodes Inc. BSS84-7-F is a P-channel FET with 50V DS breakdown voltage, 0.13A max drain current, and 10 ohm RDS(on). Ideal for switching applications, it features a single configuration with built-in diode in a small outline package. Operating in enhancement mode at up to 150°C, it has Gull Wing terminals and matte tin finish.
222197
Amphenol
Amphenol 222197 RF connector features gold contact finish, threaded coupling, and PTFE insulator. With a max operating temp of 165°C and min of -65°C, it's ideal for commercial applications up to 2 GHz frequency. This male plug connector has a characteristic impedance of 75 ohm for cable mounting in various RF setups.
3-1532004-2
TE Connectivity
TE Connectivity's 3-1532004-2 is a threaded RF connector with a voltage standing wave ratio of 1.2 and a characteristic impedance of 93 ohm. It is commonly used in cable applications, offering multiple mating parts and solder termination for male contacts. Its right angle mounting style makes it suitable for frequencies up to 2 GHz.
3202-6000
Sv Microwave
3202-6000 RF SMPM Connector by Sv Microwave features a 0.156" body diameter and 0.08" body depth, with a max operating frequency of 40 GHz. It has a characteristic impedance of 50 ohm, suitable for panel mount applications in high-frequency environments. The connector is designed with stainless steel shell material and PTFE insulator for durability and reliable performance.
DIN7A-J-P-GF-RA-BH1
Samtec
Samtec DIN7A-J-P-GF-RA-BH1 is a 75 ohm RF connector with gold finish, right angle mounting, and female contact gender. Ideal for board and panel mounting applications requiring threaded coupling and PTFE insulator material. Body dimensions: 0.276" L x 0.163" D x 0.276" W x 0.76" D.
U.FL-R-SMT
Hirose Electric
U.FL-R-SMT by Hirose Electric is a RF connector with 50 ohm impedance, suitable for commercial applications up to 6 GHz frequency. It features liquid crystal polymer insulation, surface mount termination, and silver shell finish. Ideal for board mounting in various electronic devices requiring reliable RF connections.
ERN.1D.694.CNA
Lemo Usa
ERN.1D.694.CNA by Lemo Usa is a panel mount RF F connector with snap coupling, polyamide insulator, and solder termination. It features a female contact gender and socket body style for straight mounting applications in the Other Function RF Connectors category.
20279-001E-03
I-pex
The I-pex 20279-001E-03 is a RF MHF connector with a body length of 0.102", body diameter of 0.079", and max operating frequency of 9 GHz. It is used for board mounting in applications requiring a characteristic impedance of 50 ohm, such as wireless communication systems.
RSP-122811-01
Samtec's RSP-122811-01 RF MHF Connector features a 50 ohm characteristic impedance, SNAP coupling type, and 6 GHz max operating frequency. Ideal for board mounting in commercial applications with liquid crystal polymer insulator material and male contact gender.
SF1621-60048-1S
SF1621-60048-1S by Sv Microwave is a threaded RF connector with 50 ohm impedance, suitable for panel mount applications. Featuring polyetherimide insulator and stainless steel shell, it operates b/w -65 to 165 °C at frequencies up to 50 GHz. Ideal for board and panel mounting, this female jack connector has a 0.357" body depth.
SF1521-60150
SF1521-60150 by Sv Microwave is a 2.92mm RF connector with threaded coupling, suitable for board mounting. With a max operating frequency of 40 GHz and VSWR of 1.25, it has a characteristic impedance of 50 ohm. This female jack connector is made of stainless steel, ideal for applications requiring high-frequency signal transmission.
032-0021-0001
TE Connectivity's 032-0021-0001 RF Connector features threaded coupling, gold contact finish, and PTFE insulator. With a max operating frequency of 2 GHz and characteristic impedance of 50 ohm, it is ideal for applications requiring high-frequency signal transmission in temperatures ranging from -55 to 125°C. The connector is designed for male contacts with crimp termination on cables.
MS-180(20)
The Hirose Electric MS-180(20) RF Connector features a 0.3 dB insertion loss, 11 GHz max operating frequency, and 1.4 VSWR. Ideal for board mounting applications in electronics with a temperature range of -40 to 85°C. This female connector has a straight receptacle design with liquid crystal polymer insulator material.
R222.M80.500
Radiall S A
Radiall S A R222.M80.500 RF SMP Connector has 0.16 dB insertion loss, 1.32 VSWR, and operates up to 6 GHz. With a body length of 0.256", it is ideal for right angle cable mounting applications in RF systems requiring a 50 ohm characteristic impedance.
EPY.00.250.NTN
EPY.00.250.NTN by Lemo Usa is a SNAP RF CONNECTOR with POLYTETRAFLUOROETHYLENE insulator, 50 ohm impedance, and 1.5 GHz frequency for BOARD mounting applications. It features FEMALE contact gender, RIGHT ANGLE mount style, and 1.25 VSWR ideal for solder termination in RF systems.
HK-LR-SR2(12)
RF CONNECTOR; Termination Contact Finish: GOLD; JESD-609 Code: e4;
73415-5741
Molex
Molex 73415-5741 RF SMP Connector features 50 ohm impedance, gold finish, and brass shell. Ideal for board mounting applications with a max operating frequency of 40 GHz. Suitable for high-frequency signal transmission in electronic devices.
1055692-1
TE Connectivity's 1055692-1 RF Connector features 0.15 dB Insertion Loss, SNAP Coupling Type, and POLYPHENYLENE SULFIDE Insulator. With a max operating frequency of 6 GHz, it is ideal for board mounting in applications requiring a 50 ohm characteristic impedance and male contact gender.
73415-3593
Molex 73415-3593 RF SMP Connector features 50 ohm impedance, 40 GHz frequency, and 700VAC dielectric voltage. Ideal for board mounting in applications requiring high-frequency signal transmission with a max operating temperature of 155°C.
1996705-4
TE Connectivity's 1996705-4 RF SMPM CONNECTOR features SNAP coupling, stainless steel shell, and right angle mounting. With dimensions of 1.12" x 0.85" x 0.392", it operates b/w -55 to 105°C. Ideal for board mounting applications requiring a male contact gender with screw termination.
CUC-COX-J1M-A/LBS
Phoenix Contact
RF CONNECTOR;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SMP-MSLD-PCS-5T
RF SMP CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 470VAC; Insulation Resistance: 5000000000 ohm;
SMP-MSLD-PCS-2
RF SMP CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
SMPM-PF-P-EG-ST-SM-1
Samtec's SMPM-PF-P-EG-ST-SM-1 RF connector features a 50 ohm impedance, SNAP coupling, and brass shell material. With a max operating frequency of 65 GHz, it is ideal for high-frequency applications requiring surface mount termination on boards.
SMP-MSLD-PCS-16
RF SMP CONNECTOR;
SMP-MSSB-PCS
SMP-MSSB-PCS by Amphenol is a RF SMP connector with 50 ohm impedance, suitable for applications up to 18 GHz. Featuring gold-plated brass contacts, it offers high durability with 500 cycles and low contact resistance of 6 mohm. With a compact body size and surface mount termination, it is ideal for commercial RF connectivity needs.
SMP-MSSB-PCS-1
RF SMP CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Type: BOARD; Filter Feature: NO; Additional Features: VSWR IS MAX AT 20GHZ;
SMP-MSLD-PCS
RF SMP CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 500VAC; Additional Features: VSWR IS MAX AT 20GHZ;
SMP-MSLD-PCS-T
RF SMP CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 470VAC; Insulator Material: LIQUID CRYSTAL POLYMER;
SMP-MSLD-PCS18T
RF SMP CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
SMP-MSFD-PCE-1
RF SMP CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 700VAC; Body or Shell Style: JACK;
SMP-MSLD-PCT-10
RF SMP CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
SMP-MSLD-PCR
RF SMP CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 700VAC; Mounting Style: STRAIGHT;
SMP-MSLD-PCT-6
RF SMP CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Voltage Standing Wave Ratio: 1.25; No. of Ports: 1;
SMP-MSFD-PCR
RF SMP CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 700VAC; Minimum Withdrawal Force (N): 8.896;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved