Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SMP-MSSB-PCS by Amphenol is a RF SMP connector with 50 ohm impedance, suitable for applications up to 18 GHz. Featuring gold-plated brass contacts, it offers high durability with 500 cycles and low contact resistance of 6 mohm. With a compact body size and surface mount termination, it is ideal for commercial RF connectivity needs.
Median Price
$15.070
Lifecycle Status
Suppliers In-Stock
17
In-Stock Inventory
1k+
Arrow
1+ parts
$7.786
100+ parts
$5.688
1k+ parts
-
10k+ parts
Heilind Electronics
$11.860
$9.413
$9.266
Farnell
$14.130
$11.990
$11.870
DigiKey
$16.010
$11.564
$9.832
Mouser Electronics
$16.570
$12.780
$12.100
TTI
$17.180
$11.310
$8.950
$6.800
Element14
$18.784
$14.518
$12.381
Newark
$21.310
$15.940
$15.050
Chip1Stop
$127.690
Powell Electronics
$11.190
Verical
$11.835
$11.694
Avnet
$8.762
Nova Conductors
$9.840
Electro Sonic
$9.390
$7.860
Vyrian
IBS Electronics
$14.362
$10.280
Prism Electronics
Corohmni
$4.378
Semicontronic
$6.620
$6.454
$6.421
Ampacity Inc.
Aztec Data Supply Inc.
$8.440
Gateway Technologies
$8.757
Netroflash
Singapore Electronics
$10.824
$10.066
$9.633
$9.200
Continental Prestige Electronics
$14.620
$12.270
Argo Parts USA
Speed Components Ltd (Excess)
Perfect Parts
The compact body length of this RF connector allows for space-saving installation in tight spaces or applications with limited room.
High insulation resistance ensures reliable and stable performance, reducing the risk of signal interference or loss.
The high dielectric voltage withstand capacity ensures safe operation and prevents electrical breakdown, making this connector suitable for high voltage applications.
Gold termination contact finish provides excellent conductivity and corrosion resistance, ensuring long-term reliability and signal integrity.
With a high maximum operating temperature, this RF connector is suitable for a wide range of temperature environments, making it versatile and durable.
The low minimum operating temperature allows this connector to be used in cold conditions without compromising performance, making it suitable for various applications.
The characteristic impedance of 50 ohm ensures efficient signal transmission and compatibility with a wide range of RF devices and systems.
With a high maximum operating frequency, this RF connector is ideal for high-frequency applications such as telecommunications, military, and aerospace.
Other Function RF Connectors SMP-MSSB-PCS attributes and parameters. Explore more Other Function RF Connectors devices from Amphenol
Additional Features:
Body Width:
Body Depth:
Body Diameter:
Body Length:
Body or Shell Style:
Characteristic Impedance:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Resistance:
Contact Style:
Coupling Type:
DIN Conformance:
Dielectric Withstanding Voltage (V):
Durability:
Filter Feature:
IEC Conformity:
Maximum Insertion Force (N):
Insulation Resistance:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mounting Style:
Mounting Type:
No. of Ports:
Maximum Operating Frequency:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Panel Mount:
Reliability:
Shell Finish:
Shell Material:
Sub-Category:
Termination Type:
Total No. of Contacts:
Voltage Standing Wave Ratio:
Minimum Withdrawal Force (N):
SMP-MSSB-PCS Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
MMBF170LT1G
Onsemi
MMBF170LT1G by Onsemi is a N-CHANNEL FET with 60V DS Breakdown Voltage and 0.5A Drain Current. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max power dissipation of 0.225W. This small outline transistor has a temperature range from -55 to 150 °C.
FDV304P
The Onsemi FDV304P is a P-CHANNEL FET with 25V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max Drain Current of 0.46A and an Operating Temperature range of -55 to 150 °C. The transistor comes in a PLASTIC/EPOXY package with GULL WING terminals, suitable for surface mount configurations.
1N4148
Renesas Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
EU2B-YS3103F
Idec
ROTARY SWITCH;
2N7002
Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain Current (ID): .115 A; Operating Mode: ENHANCEMENT MODE;
1N4148W-7-F
Diodes Incorporated
1N4148W-7-F by Diodes Inc. is a single rectifier diode with 0.715V max forward voltage and 100V max reverse voltage. Ideal for applications requiring fast switching speeds, it has a small outline package style and matte tin terminal finish, making it suitable for surface mount PCB designs.
M24308/2-1F
Cinch Connectivity Solutions
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1750VAC; No. of Connectors: ONE; Body Depth: .375 inch;
SMBJ18CA
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MBR0520LT1G
MBR0520LT1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, has a peak reflow temperature of 260°C, and a repetitive peak reverse voltage of 20V. This diode is ideal for applications requiring high-speed switching in compact electronic devices.
Changzhou Galaxy Century Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Vicor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BAV99LT1G
BAV99LT1G by Onsemi is a series connected diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.006 us and can handle up to 100V repetitive peak reverse voltage. Ideal for rectification applications, this diode operates b/w -65°C to 150°C temperature range.
LL4148GS08
Temic Semiconductors
LL4148GS08 by Temic Semiconductors is a glass diode with a max reverse recovery time of 0.008 us and max forward voltage of 1 V. It is a rectifier diode with a max output current of 0.15 A, ideal for applications requiring fast switching speeds and low power dissipation in electronic circuits.
LM358N
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LL4148
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BAV99
Itt Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138W-7-F
Diodes Inc.'s BSS138W-7-F is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, Gull Wing terminals, and operates in enhancement mode. With 0.2A max drain current and 3.5 ohm RDS(on), it's UL recognized and suitable for small outline packages at temperatures ranging from -55 to 150°C.
Tyco Electronics Amp
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; IEC Conformity: NO; Mixed Contacts: NO; Empty Shell: NO;
MBRS130LT3G
Rochester Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
4554
Jw Miller Magnetics
Other Semiconductors;
331-0472-201
Hirose Electric
OTHER RF CONNECTOR;
MM8930-2600RJ4
Murata Manufacturing
Murata Manufacturing's MM8930-2600RJ4 RF Connector has a 50 ohm impedance, 1.2 VSWR, and operates up to 6 GHz. With SNAP coupling, it is ideal for surface mount applications in boards with temperatures ranging from -40 to 85°C.
R222.423.720
Radiall S A
R222.423.720 by Radiall S A is a RF connector with 0.25" body diameter, 5000000000 ohm insulation resistance, and 0.42 dB insertion loss. It is used in applications requiring a 50 ohm characteristic impedance, such as commercial-grade equipment operating up to 12 GHz frequency with surface mount termination for durability of 1000 cycles.
96_MMPX-50-0-3/111_NM-1
Huber+suhner Ag
96_MMPX-50-0-3/111_NM-1 by Huber+suhner Ag is a SNAP-type RF connector with characteristic impedance of 50 ohm, suitable for applications up to 67 GHz. It features a max operating temperature of 155°C and min of -65°C, making it ideal for high-frequency board mounting with solder termination.
TC-400-716FC
Times Microwave Systems
RF 7/16 DIN CONNECTOR;
3211-60035
Sv Microwave
3211-60035 by Sv Microwave is a panel mount RF connector with gold termination, snap coupling, and PTFE insulator. It has a characteristic impedance of 50 ohm and operates up to 40 GHz. Ideal for high-frequency applications requiring reliable male connectors with straight mounting style.
BJ770-GL
Bel Fuse
BJ770-GL by Bel Fuse is a RF TRB connector with 0.562" body diameter and 0.487" body depth. It has a nickel shell finish, brass shell material, and solder termination type. Ideal for commercial applications at 0.5 GHz frequency, it features a female contact gender and straight mounting style with locking option.
R222.152.000
R222.152.000 RF F CONNECTOR by Radiall S A features a 0.142" body diameter, 500VAC dielectric voltage, and 1.35 VSWR for applications up to 26.5 GHz. With gold-plated contacts, POLYTETRAFLUOROETHYLENE insulator, and durability of 500 cycles, it's ideal for commercial RF connectivity in temperatures ranging from -65 to 165 °C.
5-1814826-3
TE Connectivity
TE Connectivity 5-1814826-3 RF Connector features threaded coupling, polypropylene insulator, and nickel shell finish. With 75 ohm impedance and RG 6 cable compatibility, it is ideal for commercial applications up to 2 GHz frequency range. The panel mount connector has a durability of 50 cycles and operates b/w -55°C to 85°C temperatures.
PL75C-307
RF TRB CONNECTOR; MIL Conformity: NO; Mating Contact Finish: NICKEL; Termination Contact Finish: NICKEL; IEC Conformity: NO; DIN Conformance: NO;
19S101-40ML5
Rosenberger Hochfrequenztechnik & Kg
19S101-40ML5 RF SMP connector by Rosenberger features a 0.26 dB insertion loss, 50 ohm impedance, and 26.5 GHz operating frequency. Ideal for commercial applications requiring high durability and reliability with a temperature range of -65 to 155 °C. Suitable for board mounting with male contact gender and gold finish.
R222900100W
R222900100W RF SMP connector by Radiall S A features a body diameter of 0.173", insertion loss of 0.42 dB, and insulation resistance of 5000000000 ohm. Ideal for applications requiring a durable, high-frequency connector with a characteristic impedance of 50 ohm, such as in commercial settings up to 12.4 GHz frequency range.
3221-40007
The SV Microwave 3221-40007 RF SMPM Connector has a characteristic impedance of 50 ohm, withstands up to 450VAC, and operates at frequencies up to 40 GHz. Ideal for applications requiring high durability, such as in aerospace and telecommunications industries.
GRF7-J-P-04-GF-ST-TH1-E
Samtec
The Samtec GRF7-J-P-04-GF-ST-TH1-E RF connector has a body length of 1.268", operates up to 6 GHz, and features gold over nickel termination. Ideal for board mounting applications requiring a 75 ohm characteristic impedance, this female jack connector is designed with PTFE insulator material for reliable performance in temperatures ranging from -55°C to 125°C.
R222M80500
R222M80500 by Radiall S A is a RF SMP CONNECTOR with a body length of 0.256 inch and body depth of 0.421 inch. It has an insertion loss of 0.16 dB and can operate at temperatures ranging from -55 to 165 °C. This connector is commonly used in applications requiring a 50 ohm characteristic impedance and a max operating frequency of 6 GHz.
925-137J-51P
Amphenol
RF SMPM CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
M49142/08-0006
Winchester Interconnect
M49142/08-0006 by Winchester Interconnect is a MIL-conformant RF connector with threaded coupling, gold contact finish, and PTFE insulator. It is a plug-type connector for cable mounting in straight orientation, ideal for high-frequency applications requiring secure connections.
R317.072.000
R317.072.000 by Radiall S A is a RF connector with BAYONET coupling, suitable for 2 GHz applications. Features include POLYTETRAFLUOROETHYLENE insulator, NICKEL finish, and 50 ohm impedance. Ideal for high-frequency communication systems requiring a max operating temperature of 165 °C and VSWR of 1.8.
19S101-40ML5-NM
The RF SMP connector 19S101-40ML5-NM by Rosenberger features a characteristic impedance of 50 ohm, insertion loss of 0.26 dB, and max operating frequency of 26.5 GHz. Ideal for commercial applications, this plug-style connector with liquid crystal polymer insulator is designed for board mounting in high-frequency environments.
73415-5120
Molex
Molex 73415-5120 RF SMP Connector has a max operating frequency of 26.5 GHz with VSWR of 1.5, ideal for cable mounting applications. Features include PTFE insulator, gold shell finish, and beryllium copper shell material for high-quality signal transmission in RF systems.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SMP-MSLD-PCS-5T
RF SMP CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 470VAC; Insulation Resistance: 5000000000 ohm;
SMP-MSLD-PCS-2
RF SMP CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
SMPM-PF-P-EG-ST-SM-1
Samtec's SMPM-PF-P-EG-ST-SM-1 RF connector features a 50 ohm impedance, SNAP coupling, and brass shell material. With a max operating frequency of 65 GHz, it is ideal for high-frequency applications requiring surface mount termination on boards.
SMP-MSLD-PCS-16
RF SMP CONNECTOR;
SMP-MSSB-PCS-1
RF SMP CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Type: BOARD; Filter Feature: NO; Additional Features: VSWR IS MAX AT 20GHZ;
SMP-MSLD-PCS
RF SMP CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 500VAC; Additional Features: VSWR IS MAX AT 20GHZ;
SMP-MSLD-PCS-T
RF SMP CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 470VAC; Insulator Material: LIQUID CRYSTAL POLYMER;
SMP-MSLD-PCS18T
RF SMP CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
SMP-MSFD-PCE-1
RF SMP CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 700VAC; Body or Shell Style: JACK;
SMP-MSLD-PCT-10
RF SMP CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
SMP-MSLD-PCR
RF SMP CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 700VAC; Mounting Style: STRAIGHT;
SMP-MSCM-PCT-2
RF CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Contact Style: COAX; Filter Feature: NO;
SMP-MSLD-PCT-6
RF SMP CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Voltage Standing Wave Ratio: 1.25; No. of Ports: 1;
SMP-MSSB-PCR
RF SMP CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 500VAC; Body Depth: .236 inch;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved