Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 73415-3593 RF SMP Connector features 50 ohm impedance, 40 GHz frequency, and 700VAC dielectric voltage. Ideal for board mounting in applications requiring high-frequency signal transmission with a max operating temperature of 155°C.
Median Price
$3.750
Lifecycle Status
Suppliers In-Stock
13
In-Stock Inventory
1k+
Newark
1+ parts
$7.340
100+ parts
$5.990
1k+ parts
$5.450
10k+ parts
-
DigiKey
$9.830
Master Electronics
$3.530
$2.770
$2.530
Verical
$2.950
$2.700
Chip1Stop
$2.580
Digiode
$4.731
Nova Conductors
$5.319
TestEquity
$5.970
Rapid Electronics
$10.023
TME
$5.540
$4.350
$3.980
VNN
IBS Electronics
$5.287
$3.462
$2.475
Vyrian
Semicontronic
$2.190
$2.135
$2.124
Corphita
$4.482
Continental Prestige Electronics
$5.020
$4.920
Netroflash
Andel Nordic
$5.790
$5.558
Aztec Data Supply Inc.
$8.221
Argo Parts USA
Perfect Parts
Assy Fe
High insulation resistance ensures signal integrity and reduces the risk of signal loss or interference.
Compact body width allows for efficient use of space, making it suitable for applications where space is limited.
High dielectric voltage withstand capacity ensures safety and reliability in high voltage applications.
Optimal body depth provides a secure fit and ensures stable connections.
Snap coupling type allows for quick and easy installation, saving time and effort.
Polytetrafluoroethylene insulation material offers high temperature resistance and excellent electrical properties.
High maximum operating temperature allows for use in extreme temperature environments without performance degradation.
Low minimum operating temperature ensures functionality in cold environments.
Gold shell finish provides excellent conductivity and corrosion resistance, ensuring long-lasting performance.
RF SMP connector type is widely used in high-frequency applications, offering reliable signal transmission.
High rated current capacity allows for safe passage of signals without overheating or damage.
Low VSWR value indicates good impedance matching and efficient signal transfer.
Board mounting type allows for secure attachment to PCB, ensuring stability and ease of installation.
Standard characteristic impedance of 50 ohm ensures compatibility with common RF systems and components.
Brass shell material provides durability and conductivity, enhancing overall performance and longevity.
Surface mount termination type is suitable for automated assembly processes and offers reliable connections.
Male contact gender ensures compatibility with corresponding female connectors, enabling secure connections.
Low contact resistance minimizes signal loss and ensures efficient power transmission.
Plug body style allows for easy and secure connections, making it suitable for various applications.
Right angle mounting style offers flexibility in installation and allows for space-saving solutions.
Coaxial contact style ensures reliable signal transmission and minimizes interference.
High maximum operating frequency of 40 GHz makes it suitable for high-speed data transmission applications.
Other Function RF Connectors 73415-3593 attributes and parameters. Explore more Other Function RF Connectors devices from Molex
Body Width:
Body Depth:
Body or Shell Style:
Characteristic Impedance:
Connector Type:
Mating Contact Finish:
Contact Gender:
Contact Material:
Contact Resistance:
Contact Style:
Coupling Type:
Dielectric Withstanding Voltage (V):
Insulation Resistance:
Insulator Material:
Mounting Style:
Mounting Type:
No. of Ports:
Maximum Operating Frequency:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Panel Mount:
Rated Current - Signal:
Shell Finish:
Shell Material:
Sub-Category:
Termination Type:
Total No. of Contacts:
Voltage Standing Wave Ratio:
73415-3593 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
2N2222A
Boca Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM358MX
ROHM
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
SS14
Rfe International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MBRS130LT3G
Onsemi
MBRS130LT3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.445V. It operates b/w -65 to 125°C, has a reverse test voltage of 30V, and is ideal for power applications due to its small outline package style.
MBR0530T1G
MBR0530T1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.375V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring high-speed switching in compact electronic devices like smartphones and tablets. The package style is small outline with gull wing terminals for surface mount assembly.
LL4148
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SMBJ18CA
Hy Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358N
Texas Instruments
LM358N by Texas Instruments is an operational amplifier with 2 functions, offering a max input offset voltage of 9000 uV and a nominal common mode reject ratio of 85 dB. Widely used in commercial applications, it operates at temperatures ranging from 0 to 70 °C and has a unity gain bandwidth of 1000 kHz.
LM358M
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
EEAGA1H4R7
Panasonic
Panasonic EEAGA1H4R7 is a 4.7uF, 50V Aluminum Electrolytic Capacitor with 0.1 Tan Delta and 0.003mA Leakage Current. Ideal for applications requiring high ripple current handling in temperatures ranging from -55 to 105°C.
BAV99
Comchip Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Pulse Electronics
2N7002
Central Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .115 A; Maximum Drain Current (Abs) (ID): .115 A;
1N4148WS
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
OPA2277UA
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Continental Device India
BSS138BKW,115
NXP Semiconductors
NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.
LM7805CT
Fairchild Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
1N4148
Itt Components
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .15 A;
NE555D
NE555D by Texas Instruments is an 8-terminal IC with a supply voltage range of 4.5V to 16V, suitable for analog waveform generation applications. It operates at temperatures from 0°C to 70°C and has a max supply current of 15mA. The package style is small outline, making it ideal for compact electronic designs.
1045621-1
TE Connectivity
TE Connectivity 1045621-1 is a threaded RF SSMA connector with PTFE insulator, 50 ohm impedance, and 18 GHz frequency. Ideal for commercial applications requiring a female jack connector with right-angle mounting and solder termination. Operating temperature range from -65 to 165°C makes it versatile for various environments.
AFI-J-P-GF-ST-SM1
Samtec
Samtec's AFI-J-P-GF-ST-SM1 RF connector features gold termination, PTFE insulator, and brass body. With 50 ohm impedance, it is ideal for commercial applications requiring durability up to 100 cycles. This straight jack connector with solder termination is designed for board mounting with a locking option.
X.FL-R-SMT-1(80)
Hirose Electric
RF CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED; JESD-609 Code: e4; Termination Contact Finish: Gold (Au);
CX020L2HN
TE Connectivity's CX020L2HN RF Connector features a screw coupling type, PTFE insulator material, and 50 ohm characteristic impedance. Ideal for applications requiring a max operating frequency of 60 GHz, such as board-mounted RF connections in electronic devices.
BJ72
Vertiv
RF TRB CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Maximum Operating Frequency: .5 GHz; Termination Type: SOLDER; No. of Ports: 1;
1521-60051
Sv Microwave
1521-60051 by Sv Microwave is a threaded RF connector with polyetherimide insulator. It has a VSWR of 1.25, operates up to 40 GHz, and features female contact gender. Ideal for board mounting in applications requiring high-frequency signal transmission.
1058574-1
TE Connectivity's 1058574-1 RF Connector features a 0.25" body diameter, 0.39" body depth, and 0.13 dB insertion loss. With a max operating frequency of 18 GHz, it is ideal for applications requiring a 50 ohm characteristic impedance and panel mounting in high-frequency environments.
SF1212-6000
SF1212-6000 by Sv Microwave is an RF SMP connector with a body diameter of 0.164" and depth of 0.32". Featuring a VSWR of 1.35, it operates up to 20 GHz and has a characteristic impedance of 50 ohm. Ideal for board mounting applications requiring right angle male connectors terminated via soldering.
3-1532006-6
TE Connectivity's 3-1532006-6 RF connector features SLIDE ON coupling, 50 ohm impedance, and CRIMP termination. Ideal for cable mounting applications, this MALE plug connector is designed for RF connections in various electronic devices.
R222508700
Radiall S A
The Radiall S A R222508700 RF SMP Connector features a body diameter of 0.164", insertion loss of 0.12 dB, and gold (Au) termination contact finish. With a max operating frequency of 18 GHz, it is ideal for board mounting in applications requiring a durable, 50 ohm coaxial connection with high insulation resistance and low voltage standing wave ratio.
FLA.00.250.NTAC27
Lemo Usa
FLA.00.250.NTAC27 by Lemo Usa is a SNAP RF CONNECTOR with POLYTETRAFLUOROETHYLENE insulator, 50 ohm impedance, and 1.5 GHz frequency for cable mounting applications. It features a VSWR of 1.25, solder termination, male contact gender, and right-angle plug design.
GRF1-J-P-04-E-ST-TH1
Samtec's GRF1-J-P-04-E-ST-TH1 RF Connector features threaded coupling, 50 ohm impedance, and a max frequency of 6 GHz. Ideal for board mounting applications requiring a female jack connector with gold over nickel finish for solder termination.
302102
Amphenol
RF SMP CONNECTOR; Manufacturer Series: 302102;
CUC-COX-J1M-A/LBS
Phoenix Contact
RF CONNECTOR;
331-0472-260
OTHER RF CONNECTOR;
73415-5300
Molex
Molex 73415-5300 RF SMP Connector has a characteristic impedance of 50 ohm, operates up to 40 GHz, and features a gold shell finish. Ideal for high-frequency applications requiring surface mount termination on boards due to its female contact gender and straight mounting style.
96_MMPX-50-0-2/111_NM
Huber+suhner Ag
96_MMPX-50-0-2/111_NM RF connector by Huber+suhner Ag features a SNAP coupling type, POLYTETRAFLUOROETHYLENE insulator, and 50 ohm characteristic impedance. Ideal for applications requiring a durable FEMALE JACK connector with a max operating frequency of 65 GHz on BOARD mounting.
E.FL-LR-SMT(10)
E.FL-LR-SMT(10) by Hirose Electric is a RF UMC/UMCC connector with 50 ohm impedance and 1.3 VSWR, suitable for surface mount applications. Featuring liquid crystal polymer insulator, it operates up to 2 GHz frequency, making it ideal for board mounting in high-frequency electronic devices.
BJ77FL
Bel Fuse
BJ77FL RF TRB CONNECTOR by Bel Fuse features a 0.487" body depth, NICKEL shell finish, and BRASS shell material. Ideal for commercial applications up to 0.5 GHz frequency, it offers FEMALE contact gender with SOLDER termination for reliable performance in PANEL mounting setups.
1055687-1
Tyco Electronics Amp
RF SSMT CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; JESD-609 Code: e4; Insulator Material: POLYPHENYLENE SULFIDE; Contact Material: COPPER ALLOY;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
73412-0110
Molex 73412-0110 RF Connector features 50 ohm impedance, 6 GHz frequency, and 90VAC dielectric voltage. Ideal for commercial applications, it offers a durable design with gold nickel finish and liquid crystal polymer insulator for reliable performance in temperatures ranging from -40 to 90°C.
73412-0114
Molex 73412-0114 RF Connector has a Voltage Standing Wave Ratio of 1.3, SNAP coupling type, and male contact gender. Ideal for surface mount board applications in various electronic devices.
73415-5030
Molex 73415-5030 is an RF SMP connector with a characteristic impedance of 50 ohm. It has a max operating frequency of 40 GHz and is suitable for use in commercial applications.
73415-5120
RF SMP CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Type: CABLE; Body or Shell Style: JACK; Panel Mount: NO;
73415-3310
RF SMP CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Insertion Loss: .1 dB; Contact Material: BRASS;
73415-3320
RF SMP CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Body Length: .236 inch; Maximum Operating Frequency: 40 GHz;
73415-5032
RF SMP CONNECTOR; Option: WITH CABLE ASSEMBLY; Contact Gender: FEMALE; Termination Type: CRIMP; Mating Contact Finish: NOT SPECIFIED; Body Length: .4 inch;
73415-3030
RF SMP CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Contact Style: COAX; Insertion Loss: .1 dB;
734160010
73415-3032
RF SMP CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Depth: .26 inch; Rated Current - Signal: 1.2 A; Minimum Operating Temperature: -65 Cel;
73415-3592
RF SMP CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Coupling Type: SNAP; Panel Mount: NO; Body Depth: .2 inch;
73415-3590
RF SMP CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Total No. of Contacts: 1; Mounting Style: STRAIGHT; Body or Shell Style: PLUG;
73415-5720
RF SMP CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Insulator Material: POLYTETRAFLUOROETHYLENE; Voltage Standing Wave Ratio: 1.5; Maximum Operating Frequency: 40 GHz;
73415-3591
RF SMP CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Characteristic Impedance: 50 ohm; Coupling Type: SNAP;
73415-5310
RF SMP CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Contact Finish: NOT SPECIFIED; Shell Finish: GOLD; Shell Material: BRASS;
73415-5740
RF SMP CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Minimum Operating Temperature: -65 Cel; Maximum Operating Temperature (Cel): 165; Body Length: .25 inch;
73415-5741
RF SMP CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Body or Shell Style: PLUG; Contact Material: NOT SPECIFIED; Maximum Operating Temperature (Cel): 165;
73415-3595
RF SMP CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Coupling Type: SNAP; Shell Finish: GOLD; Termination Contact Finish: NOT APPLICABLE;
73415-3596
RF SMP CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Coupling Type: SNAP; Mounting Type: BOARD; Minimum Operating Temperature: -65 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved