Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Winchester Interconnect's 7702-13 RF Connector features gold contact finish, crimp termination, and 75 ohm impedance. Ideal for panel mounting in applications requiring a straight jack connector with a max operating frequency of 0.5 GHz.
Median Price
$2.868
Lifecycle Status
Suppliers In-Stock
20
In-Stock Inventory
1k+
Arrow
1+ parts
$0.278
100+ parts
-
1k+ parts
10k+ parts
Heilind Electronics
$1.968
$1.687
$1.586
$1.563
Farnell
$2.180
$1.760
$1.650
Interstate Connecting
$2.945
$2.565
$2.305
Misumi USA
$3.150
DigiKey
$3.790
$2.740
$2.329
$2.183
Newark
$4.300
$3.100
$2.640
Element14
$5.300
$3.830
$3.260
Verical
$1.945
$1.886
Master Electronics
$2.990
$2.820
$2.650
Chip1Stop
$2.790
Future Electronics
$2.550
$2.450
Galco
$2.270
Nova Conductors
Flip Electronics
NAC Semi
$3.030
$2.760
IBS Electronics
$3.483
ACDS - Activité Composants Distribution Service
LIBRA Elektronik GmbH
VNN
Ampacity Inc.
$0.477
Authorized Procurement Solutions
Argo Parts USA
Continental Prestige Electronics
Netroflash
Allows for easy mounting on a panel, making installation simple and convenient.
Gold contact finish ensures better conductivity and corrosion resistance, leading to improved signal transmission quality.
Being an RF connector means it is specifically designed for radio frequency applications, ensuring reliable and efficient signal transmission.
Matches the impedance requirements for optimized signal transfer in RF applications, reducing signal loss and ensuring high-quality performance.
Crimp termination allows for a secure connection between the cable and connector, ensuring stable signal transmission.
Straight mounting style provides a clean and simple installation process, suitable for various applications.
Capable of handling frequencies up to 0.5 GHz, making it suitable for a wide range of RF applications requiring high-frequency operation.
Other Function RF Connectors 7702-13 attributes and parameters. Explore more Other Function RF Connectors devices from Winchester Interconnect
Body or Shell Style:
Characteristic Impedance:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
DIN Conformance:
IEC Conformity:
JESD-609 Code:
MIL Conformity:
Mounting Style:
Mounting Type:
Maximum Operating Frequency:
Option:
Panel Mount:
Termination Type:
7702-13 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
At Winchester, we understand the mission-critical nature of your work and the performance-driven requirements of your applications. Our team works relentlessly to ensure that the connectors, cables, and cable assemblies we deliver are worthy of your designs. Our multi-disciplinary experts combine deep industry and interconnect experience, while leveraging the latest design and simulation tools. We specialize in quickly understanding technical requirements and collaborating directly with your engineers to develop solutions for real-world connectivity challenges. Winchester is trusted by world-class organizations across the globe to solve their most difficult connectivity problems. By bringing systems to life with power and data, we’re committed to helping make the world better, safer, healthier and more connected.
CC0603KRX7R9BB104
Yageo
Yageo's CC0603KRX7R9BB104 is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. With X7R temperature characteristics, it operates b/w -55 to 125°C. Ideal for surface mount applications in electronics due to its compact size of 1.6mm x 0.8mm x 0.8mm and wraparound terminals.
43025-0400
Molex
The Molex 43025-0400 is a board connector with 4 contacts, 2 rows, and a mating contact pitch of 0.118". It has a body length of 0.27", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for commercial applications requiring a female connector with crimp termination and UL94V-0 flammability rating.
M39029/56-351
Itt Cannon
CONNECTOR ACCESSORY; MIL Conformity: YES; Terminal Type: WIRE; IEC Conformity: NO; Alternate Contact Sources: ITT CANNON; Associated Military - Specifications: MIL-C-38999;
EU2B-YS3203C
Idec
ROTARY SWITCH;
2N2222A
Allegro MicroSystems
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
ABS07-32.768KHZ-T
Abracon
Abracon ABS07-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring 0.032768 MHz frequency precision in a compact surface-mount design with gold over nickel finish.
M24308/2-1F
TE Connectivity
TE Connectivity's M24308/2-1F D-Sub Connector features 9 contacts, 2 rows, and a shell size of 1/E. With a rated current of 7.5A, it operates b/w -55°C to 125°C. Ideal for cable mounting applications, this connector has a steel shell with cadmium finish and uses crimp termination for female contact pins.
BAV99
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
MBRS130LT3G
Onsemi
MBRS130LT3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.445V. It operates b/w -65 to 125°C, has a reverse test voltage of 30V, and is ideal for power applications due to its small outline package style.
TE Connectivity's M39029/56-351 is a CRIMP contact type backshell accessory with rated voltage of 115V. It operates b/w -65 to 175 °C, suitable for MIL-C-39029/56 connectors with wire gauge ranging from 28 to 22 AWG. Ideal for military applications requiring female contacts and copper alloy material.
Micro Commercial Components
Small Signal Bipolar Transistors; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-609 Code: e0;
NC7WZ17P6X
Fairchild Semiconductor
BUFFER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;
OHN3020U
Tt Electronics Plc
OHN3020U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 5mT. It features an output range of 25mA and operates in temperatures ranging from -20 to 85°C. Ideal for applications requiring precise detection and measurement of magnetic fields, such as automotive sensors or industrial automation systems.
SMBJ18CA
Concord Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V;
Glenair
CONNECTOR ACCESSORY; Associated Backshell Military - Specifications: MIL-DTL-38999; Material: COPPER ALLOY; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: FEMALE; DIN Conformity: NO;
LM358MX
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
2N7002,215
NXP Semiconductors
2N7002,215 by NXP Semiconductors is a small signal N-CHANNEL FET with a min DS breakdown voltage of 60V and max drain current of 0.3A. It is used for switching applications in enhancement mode, operates b/w -65 to 150 °C, and has a max power dissipation of 0.2W.
LM2931AZ-5.0RAG
LM2931AZ-5.0RAG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage, 0.1A max output current, and 0.6V max dropout voltage. Ideal for applications requiring stable voltage regulation in temperature-sensitive environments up to 150°C.
DS18B20Z
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Housing: PLASTIC; Maximum Accuracy (Cel): 0.50;
MMBF170LT1G
Rochester Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Package Style (Meter): SMALL OUTLINE; No. of Terminals: 3;
D4S20L-40MA5-A
Rosenberger Hochfrequenztechnik & Kg
RF CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
PL155-47
Vertiv
RF TRB CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Body or Shell Style: PLUG; Shell Material: BRASS; Maximum Operating Frequency: .5 GHz;
73415-3591
The Molex 73415-3591 RF SMP Connector features a body diameter of 0.25", gold termination contact finish, and a max operating frequency of 40 GHz. Ideal for board mounting applications in commercial settings, with durability up to 500 cycles and a characteristic impedance of 50 ohm.
GRF7-J-P-04-GF-ST-TH1-E
Samtec
The Samtec GRF7-J-P-04-GF-ST-TH1-E RF connector has a body length of 1.268", operates up to 6 GHz, and features gold over nickel termination. Ideal for board mounting applications requiring a 75 ohm characteristic impedance, this female jack connector is designed with PTFE insulator material for reliable performance in temperatures ranging from -55°C to 125°C.
R222.M80.500
Radiall S A
Radiall S A R222.M80.500 RF SMP Connector has 0.16 dB insertion loss, 1.32 VSWR, and operates up to 6 GHz. With a body length of 0.256", it is ideal for right angle cable mounting applications in RF systems requiring a 50 ohm characteristic impedance.
PL455ACWS-202
Other RF Connectors; Reliability: COMMERCIAL; Contact Gender: FEMALE; Total No. of Contacts: 1; Termination Type: CRIMP; Body or Shell Style: PLUG;
MS-180(20)
Hirose Electric
The Hirose Electric MS-180(20) RF Connector features a 0.3 dB insertion loss, 11 GHz max operating frequency, and 1.4 VSWR. Ideal for board mounting applications in electronics with a temperature range of -40 to 85°C. This female connector has a straight receptacle design with liquid crystal polymer insulator material.
PSMP-MSLD-PCSEM
Amphenol
PSMP-MSLD-PCSEM by Amphenol is a RF SMP CONNECTOR with a characteristic impedance of 50 ohm. It has an insertion loss of 0.09 dB and can withstand a max operating frequency of 10 GHz. This connector is commonly used in commercial applications requiring high insulation resistance and surface mount termination.
331-0472-201
OTHER RF CONNECTOR;
GRF1-J-P-08-E-ST-TH1-E
The Samtec GRF1-J-P-08-E-ST-TH1-E RF Connector has 8 ports, 50 ohm impedance, and operates up to 6 GHz. It is ideal for commercial applications requiring a reliable connector with gold finish contacts and PTFE insulation material. The connector features a straight jack body style with solder termination suitable for board mounting.
1056729-1
1056729-1 by TE Connectivity is a RF CONNECTOR with 50 ohm impedance, made of STAINLESS STEEL. Operating temperature range: -65 to 165 °C. Used in applications requiring high-quality RF connections at extreme temperatures.
5-1634552-1
TE Connectivity 5-1634552-1 RF Connector features threaded coupling, polymethylpentene insulator, and 75 ohm impedance. Ideal for commercial applications with a frequency up to 2 GHz, operating temperature range of -55 to 85°C, and durability of 50 cycles.
19S141-40ML5-NM
RF SMP CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
MS-162B
The Hirose Electric MS-162B is a female RF connector with 0.7 dB insertion loss and 1.7 VSWR, suitable for up to 10 GHz frequency applications. Featuring gold termination contact finish and liquid crystal polymer insulator, it offers SNAP coupling in a surface mount configuration for board mounting.
5-1814823-1
TE Connectivity 5-1814823-1 RF Connector has 5000000000 ohm Insulation Resistance, 0.736" Body Depth, and THREADED Coupling Type. Ideal for commercial applications with 2 GHz Max Operating Frequency, it features POLYPROPYLENE Insulator Material and ZINC ALLOY Shell Material.
RECE.20279.001E.01
Taoglas
Taoglas RECE.20279.001E.01 RF MHF Connector features 50 ohm impedance, 1.45 VSWR, and operates up to 6 GHz frequency. With SNAP coupling type and gold finish, it is ideal for surface mount applications in various RF systems requiring high-quality signal transmission.
18S102-40ML5
The RF SMP connector 18S102-40ML5 by Rosenberger features a 50 ohm characteristic impedance, 0.4 dB insertion loss, and 65 GHz max operating frequency. Ideal for commercial applications, it offers a durable design with gold finish, suitable for board mounting with surface mount termination.
FAA.1D.694.CNL
Lemo Usa
FAA.1D.694.CNL by Lemo Usa is a panel mount RF connector with snap coupling, polyamide insulator, and solder termination. It features a male contact gender and plug body style for straight mounting applications in the RF field.
GRF1-J-P-06-E-ST-TH1-E
The Samtec GRF1-J-P-06-E-ST-TH1-E RF Connector has 6 ports, 50 ohm impedance, and operates up to 6 GHz. With gold finish contacts and PTFE insulator, it is ideal for commercial applications requiring high reliability in temperatures ranging from -40°C to 90°C. The connector features a straight jack body style with solder termination for board mounting.
SMP-MSLD-PCT-10
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
7702-13
Kings Electronics
RF F CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Maximum Operating Frequency: .5 GHz; Termination Contact Finish: GOLD NICKEL; Mating Contact Finish: GOLD;
7702-5
RF CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Voltage Standing Wave Ratio: 1.4; JESD-609 Code: e4; Filter Feature: NO;
7702-8
RF CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Type: CRIMP SOLDER; Termination Contact Finish: GOLD NICKEL; Insulator Material: POLYTETRAFLUOROETHYLENE;
7702-9
RF CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; MIL Conformity: NO; Mating Contact Finish: GOLD; Body or Shell Style: JACK;
7702-1
RF F CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Panel Mount: YES; Termination Contact Finish: GOLD; MIL Conformity: NO;
7702-2
RF F CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Insulator Material: POLYTETRAFLUOROETHYLENE; Filter Feature: NO; Termination Type: CLAMP;
7702-14
RF F CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Maximum Operating Frequency: .5 GHz; Termination Type: CRIMP; Panel Mount: YES;
7702-15
RF F CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Filter Feature: NO; Panel Mount: YES; Mounting Style: STRAIGHT;
7702-10
Winchester Interconnect
RF CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: NO; Mating Contact Finish: GOLD; JESD-609 Code: e4;
7702-11
RF CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Panel Mount: YES; JESD-609 Code: e4; Coupling Type: SNAP;
7702-12
RF CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; JESD-609 Code: e4; Coupling Type: SNAP; Voltage Standing Wave Ratio: 1.4;
7702-17
RF F CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Mounting Option-1: LOCKING; Body or Shell Style: JACK;
RF CONNECTOR; Option: GENERAL PURPOSE; Maximum Operating Frequency: .5 GHz; IEC Conformity: NO; Coupling Type: SLIDE ON; Body or Shell Style: JACK;
RF CONNECTOR; Option: GENERAL PURPOSE; JESD-609 Code: e4; MIL Conformity: NO; DIN Conformance: NO; Termination Contact Finish: GOLD;
RF CONNECTOR; Option: GENERAL PURPOSE; MIL Conformity: NO; JESD-609 Code: e4; IEC Conformity: NO; Mounting Style: STRAIGHT;
RF CONNECTOR; Option: GENERAL PURPOSE; Termination Type: CLAMP; DIN Conformance: NO; Maximum Operating Frequency: .5 GHz; Body or Shell Style: PLUG;
RF CONNECTOR; Option: GENERAL PURPOSE; Termination Contact Finish: GOLD; Maximum Operating Frequency: .5 GHz; Characteristic Impedance: 75 ohm; Mounting Type: CABLE;
7702-3
RF CONNECTOR; Option: GENERAL PURPOSE; Termination Type: CRIMP; Body or Shell Style: JACK; Mounting Type: CABLE; MIL Conformity: NO;
7702-6
RF CONNECTOR; Option: GENERAL PURPOSE; Mating Contact Finish: GOLD; IEC Conformity: NO; Maximum Operating Frequency: .5 GHz; JESD-609 Code: e4;
7702-7
RF CONNECTOR; Option: GENERAL PURPOSE; Mounting Type: CABLE AND PANEL; Mounting Style: STRAIGHT; JESD-609 Code: e4; MIL Conformity: NO;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved