Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 73116-0075 RF Connector features snap coupling, gold shell finish, and 50 ohm impedance. Ideal for cable mounting with right-angle male contact gender termination. Made of polybutylene terephthalate insulator material and phosphor bronze shell material.
Median Price
$2.555
Lifecycle Status
Suppliers In-Stock
14
In-Stock Inventory
1k+
Verical
1+ parts
$1.360
100+ parts
-
1k+ parts
$1.030
10k+ parts
Mouser Electronics
$2.590
$2.080
$1.520
$1.430
Arrow
$3.000
$2.207
$1.866
DigiKey
$3.590
$2.510
Chip1Stop
$4.230
$2.960
Master Electronics
$1.280
$0.969
Powell Electronics
$1.370
$1.040
Farnell
$2.520
Digiode
$1.691
Nova Conductors
$1.901
IBS Electronics
$1.363
$1.038
TME
$1.390
$1.140
Vyrian
VNN
Semicontronic
$1.510
$1.472
$1.465
Corphita
$1.602
Argo Parts USA
Continental Prestige Electronics
$1.863
Netroflash
$1.806
$1.768
Advanced Electronics
$2.262
$2.058
$1.855
Andel Nordic
$4.682
$4.495
Optimal size for easy installation and compatibility with various devices
Slim design for compact spaces and easy handling
Low profile design for tight spaces and efficient cable management
Easy and quick snap-on connection for convenience and time-saving
Durable and reliable insulator material for long-lasting performance and protection
Corrosion-resistant and high conductivity for better signal transmission
Specifically designed for RF applications for maximum signal quality
Convenient mounting on cable for versatile installation options
Optimal impedance matching for better signal transfer and performance
Ready-to-use with cable assembly for immediate installation and use
High-quality material for durability and lower signal loss
Compatible with various wire types for flexible connectivity options
Standardized gender for easy compatibility with female connectors
Space-saving design for efficient cable routing and organization
Other Function RF Connectors 73116-0075 attributes and parameters. Explore more Other Function RF Connectors devices from Molex
Body Width:
Body Depth:
Body Length:
Characteristic Impedance:
Connector Type:
Mating Contact Finish:
Contact Gender:
Contact Material:
Coupling Type:
Insulator Material:
Mounting Style:
Mounting Type:
Option:
Panel Mount:
Shell Finish:
Shell Material:
Termination Type:
Total No. of Contacts:
73116-0075 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
PCN Design/Specification - Multiple Devices Product Improvement 24/Apr/2017
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
SMBJ18CA
Semitron
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
E8WSDC12-32.768KTR
Abracon
Abracon's E8WSDC12-32.768KTR crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and communication systems.
STM32F103C8T6
STMicroelectronics
STM32F103C8T6 by STMicroelectronics is a 32-bit microcontroller with 48 terminals, operating at up to 16 MHz. It features 10-Ch 12-Bit ADC channels and 7 DMA channels, suitable for industrial applications requiring low power consumption and high-speed connectivity via CAN, I2C(2), SPI(2), USART(3), USB.
1N4148W-7-F
Diodes Incorporated
1N4148W-7-F by Diodes Inc. is a single rectifier diode with 0.715V max forward voltage and 100V max reverse voltage. Ideal for applications requiring fast switching speeds, it has a small outline package style and matte tin terminal finish, making it suitable for surface mount PCB designs.
1N4148WS
General Instrument
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LD1117S33CTR
STMicroelectronics LD1117S33CTR is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It operates within an input voltage range of 4.75V to 15V, making it suitable for various applications requiring stable voltage regulation in compact designs. The device features low dropout voltage of 1.3V, high temperature operation up to 125°C, and small outline package style for space-constrained PCB layouts.
Multicomp Pro
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Diode Element Material: SILICON; Technology: AVALANCHE; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V;
BSS138
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Qualification: Not Qualified;
SS14
Pro-an Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Rugao Dachang Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Hy Electronic
BAV99
Promax-johnton
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
KSZ9031RNXIC
Microchip Technology
KSZ9031RNXIC by Microchip Technology is a network interface chip with 1 transceiver. It operates at a data rate of 1000 Mbps and has a nominal voltage of 1.2V. This chip is commonly used in industrial applications requiring Ethernet connectivity.
2N7002
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
2N2222A
SPC TECHNOLOGY/ MULTICOMP
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BSS138LT3G
Onsemi
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
CGA3E2X7R1H104K080AA
TDK
CGA3E2X7R1H104K080AA by TDK is a fixed ceramic capacitor with a capacitance of 0.1 uF and a rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate at temperatures ranging from -55 to 125 °C. This capacitor is commonly used in surface mount applications for various electronic devices.
CRGCQ0805F10R
TE Connectivity
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
Semicoa
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
FAA.1D.694.CNL
Lemo Usa
FAA.1D.694.CNL by Lemo Usa is a panel mount RF connector with snap coupling, polyamide insulator, and solder termination. It features a male contact gender and plug body style for straight mounting applications in the RF field.
SMP-FR-C07
Amphenol
The Amphenol SMP-FR-C07 is an RF SMP connector with a body diameter of 0.187" and depth of 0.27". Featuring a max operating frequency of 26.5 GHz, it has a VSWR of 1.35 and operates b/w -65°C to 165°C. Ideal for applications requiring a right-angle mounting style, this female socket connector has a characteristic impedance of 50 ohms.
PL75C-201
Cinch Connectivity Solutions
RF TRB CONNECTOR; IEC Conformity: NO; MIL Conformity: NO; Mating Contact Finish: NOT SPECIFIED; DIN Conformance: NO; Contact Material: NOT SPECIFIED;
BJ77FL
Bel Fuse
BJ77FL RF TRB CONNECTOR by Bel Fuse features a 0.487" body depth, NICKEL shell finish, and BRASS shell material. Ideal for commercial applications up to 0.5 GHz frequency, it offers FEMALE contact gender with SOLDER termination for reliable performance in PANEL mounting setups.
142-1000-003
Vertiv
RF CONNECTOR; Option: HERMETIC; Contact Gender: MALE; MIL Conformity: NO; Characteristic Impedance: 50 ohm; Panel Mount: NO;
U.FL-R-SMT-K(800)
Hirose Electric
OTHER RF CONNECTOR;
EM30MSD
OTHER RF CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: Silver (Ag); JESD-609 Code: e4; Contact Material: NOT SPECIFIED;
1064538-1
TE Connectivity's 1064538-1 RF SSMT CONNECTOR features a body diameter of 0.1", insulation resistance of 1000000000 ohm, and EMI shielding. Ideal for commercial applications, this connector has a max operating frequency of 6 GHz and operates in temperatures ranging from -40 to 125 °C.
CJT-T-P-HH-RA-TH1
Samtec
Samtec's CJT-T-P-HH-RA-TH1 RF connector features gold termination, 0.428" body depth, and snap coupling. Ideal for commercial applications, it offers 100 ohm impedance and operates up to 4 GHz frequency. This male coaxial jack with solder termination is designed for board mounting with locking option.
531-40047-3
Amphenol 531-40047-3 RF connector features threaded coupling, 75 ohm impedance, and 3 GHz frequency. Ideal for board mounting applications with female contact gender and right angle mounting style. Made of zinc shell material with polymethylpentene insulator for reliable performance in various RF connectivity setups.
119S141-40ML5
Rosenberger Hochfrequenztechnik & Kg
Rosenberger's 119S141-40ML5 RF SMP Connector features 0.09 dB insertion loss, SNAP coupling type, and PEEK/PTFE/LCP insulator. Ideal for board mounting in applications up to 10 GHz requiring a 50 ohm characteristic impedance.
1065-1QD
Winchester Interconnect
RF CONNECTOR; Manufacturer Series: 1065-1QD;
1056729-1
1056729-1 by TE Connectivity is a RF CONNECTOR with 50 ohm impedance, made of STAINLESS STEEL. Operating temperature range: -65 to 165 °C. Used in applications requiring high-quality RF connections at extreme temperatures.
90001
Ddk
RF CONNECTOR; IEC Conformity: NO; Body or Shell Style: PLUG; MIL Conformity: NO; Manufacturer Series: Y92; DIN Conformance: NO;
145-0701-601
Bel Fuse 145-0701-601 RF Connector features 0.06 dB insertion loss, 1400VAC dielectric voltage, and 50 ohm impedance. Ideal for commercial applications requiring a durable female coaxial jack with gold finish, suitable for panel mounting up to 40 GHz frequency.
82_MMBX-S50-0-13/111_NE
Huber+suhner Ag
82_MMBX-S50-0-13/111_NE RF connector by Huber+suhner Ag features a SNAP coupling type, 50 ohm impedance, and operates up to 12.4 GHz. Ideal for board mounting applications, this female jack connector has a VSWR of 1.5 and can withstand temperatures from -55 to 155°C.
BJ79TL-7
BJ79TL-7 by Cinch Connectivity Solutions is an RF TRB connector with a body diameter of 0.687" and body depth of 0.8". It features a nickel shell finish, brass shell material, and crimp termination type. Ideal for commercial applications at a max operating frequency of 0.5 GHz.
73116-0075
Molex
D4S24D-400A5-C
RF CONNECTOR; Manufacturer Series: D4S24D-400A5;
73415-3310
The Molex 73415-3310 RF SMP Connector features a 0.236" body diameter, gold/nickel termination contact finish, and 50 ohm characteristic impedance. Ideal for board mounting in applications requiring durability up to 500 cycles, with a max operating frequency of 40 GHz.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
73116-0070
RF CONNECTOR; Option: WITH CABLE ASSEMBLY; Contact Gender: MALE; Total No. of Contacts: 1; Insulator Material: POLYBUTYLENE TEREPHTHALATE; Characteristic Impedance: 50 ohm;
73116-0077
RF CONNECTOR; Option: WITH CABLE ASSEMBLY; Contact Gender: MALE; Insulator Material: POLYBUTYLENE TEREPHTHALATE; Coupling Type: SNAP; Mating Contact Finish: NOT APPLICABLE;
73116-0078
RF CONNECTOR; Option: WITH CABLE ASSEMBLY; Contact Gender: MALE; Insulator Material: POLYBUTYLENE TEREPHTHALATE; Body Width: .118 inch; Mounting Style: RIGHT ANGLE;
73116-0071
RF CONNECTOR; Option: WITH CABLE ASSEMBLY; Contact Gender: MALE; Shell Material: PHOSPHOR BRONZE; Contact Material: NOT APPLICABLE; Body Depth: .055 inch;
73116-0072
RF CONNECTOR; Option: WITH CABLE ASSEMBLY; Contact Gender: MALE; Panel Mount: NO; Total No. of Contacts: 1; Shell Finish: GOLD;
73116-0073
RF CONNECTOR; Option: WITH CABLE ASSEMBLY; Contact Gender: MALE; Mounting Style: RIGHT ANGLE; Termination Type: WIRE; Contact Material: NOT APPLICABLE;
73116-0074
RF CONNECTOR; Option: WITH CABLE ASSEMBLY; Contact Gender: MALE; Insulator Material: POLYBUTYLENE TEREPHTHALATE; Shell Finish: GOLD; Mating Contact Finish: NOT APPLICABLE;
73116-0053
RF CONNECTOR; Option: WITH CABLE ASSEMBLY; Contact Gender: MALE; Mounting Type: CABLE; Termination Type: WIRE; Shell Material: PHOSPHOR BRONZE;
73116-0055
RF CONNECTOR; Option: WITH CABLE ASSEMBLY; Contact Gender: MALE; Panel Mount: NO; Total No. of Contacts: 1; Body Depth: .079 inch;
73116-0057
RF CONNECTOR; Option: WITH CABLE ASSEMBLY; Contact Gender: MALE; Panel Mount: NO; Total No. of Contacts: 1; Insulator Material: POLYBUTYLENE TEREPHTHALATE;
73116-0051
RF CONNECTOR; Option: WITH CABLE ASSEMBLY; Contact Gender: MALE; Mounting Type: CABLE; Shell Finish: GOLD; Shell Material: PHOSPHOR BRONZE;
73116-0056
RF CONNECTOR; Option: WITH CABLE ASSEMBLY; Contact Gender: MALE; Panel Mount: NO; Total No. of Contacts: 1; Coupling Type: SNAP;
73116-0054
RF CONNECTOR; Option: WITH CABLE ASSEMBLY; Contact Gender: MALE; Body Depth: .079 inch; Body Width: .118 inch; Insulator Material: POLYBUTYLENE TEREPHTHALATE;
73116-0011
RF CONNECTOR; Option: WITH CABLE ASSEMBLY; Contact Gender: MALE; Insulator Material: POLYBUTYLENE TEREPHTHALATE; Characteristic Impedance: 50 ohm; Panel Mount: NO;
73116-0014
RF CONNECTOR; Option: WITH CABLE ASSEMBLY; Contact Gender: MALE; Insulator Material: POLYBUTYLENE TEREPHTHALATE; Termination Type: WIRE; Body Depth: .055 inch;
73116-0018
RF CONNECTOR; Option: WITH CABLE ASSEMBLY; Contact Gender: MALE; Characteristic Impedance: 50 ohm; Body Width: .118 inch; Mounting Type: CABLE;
73116-0015
RF CONNECTOR; Option: WITH CABLE ASSEMBLY; Contact Gender: MALE; Coupling Type: SNAP; Shell Material: PHOSPHOR BRONZE; Mounting Type: CABLE;
73116-0017
RF CONNECTOR; Option: WITH CABLE ASSEMBLY; Contact Gender: MALE; Total No. of Contacts: 1; Body Depth: .055 inch; Shell Material: PHOSPHOR BRONZE;
73116-0013
RF CONNECTOR; Option: WITH CABLE ASSEMBLY; Contact Gender: MALE; Mounting Type: CABLE; Characteristic Impedance: 50 ohm; Shell Material: PHOSPHOR BRONZE;
73116-0016
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved