Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
RF CONNECTOR; Option: WITH CABLE ASSEMBLY; Contact Gender: MALE; Total No. of Contacts: 1; Insulator Material: POLYBUTYLENE TEREPHTHALATE; Characteristic Impedance: 50 ohm;
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Digiode
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Andel Nordic
$9.262
$8.892
Corphita
Other Function RF Connectors 73116-0070 attributes and parameters. Explore more Other Function RF Connectors devices from Molex
Body Width:
Body Depth:
Body Length:
Characteristic Impedance:
Connector Type:
Mating Contact Finish:
Contact Gender:
Contact Material:
Coupling Type:
Insulator Material:
Mounting Style:
Mounting Type:
Option:
Panel Mount:
Shell Finish:
Shell Material:
Termination Type:
Total No. of Contacts:
73116-0070 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
M39029/56351
Esterline Technologies
CONNECTOR ACCESSORY; IEC Conformity: NO; Contact Gender: FEMALE; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT; Tool Settings: M22520/2-10;
FDLL4148
Onsemi
FDLL4148 by Onsemi is a single rectifier diode with a max reverse recovery time of 0.004 us. With a max forward voltage of 1V and output current of 0.2A, it is ideal for applications requiring fast switching speeds in electronic circuits. The diode's glass package body material and isolated case connection make it suitable for surface mount designs operating at temperatures up to 175°C.
2N2222A
Allegro MicroSystems
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
E8WSDC12-32.768KTR
Ecliptek
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 3 PPM/YEAR; Load Capacitance: 12.5 pF; Nominal Operating Frequency: .032768 MHz;
NC7WZ07P6X
The Onsemi NC7WZ07P6X is a logic gate with 2 functions, featuring a propagation delay of 4.8 ns at 1.8V supply voltage. With open-drain output characteristics, it operates in industrial temperatures from -40 to 85°C. Ideal for applications requiring fast signal processing and low power consumption in compact designs.
Tt Electronics Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
1N4148WS
Promax-johnton
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CRCW04020000Z0ED
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
LL4148
Taitron Components
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
STM32H753IIT6
STMicroelectronics
STM32H753IIT6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs and 2-Ch 12-Bit DACs, suitable for industrial applications requiring high-speed data processing and connectivity via CAN, ETHERNET, USB, and more.
2N7002
Samsung
N-CHANNEL AND P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 5 ohm; No. of Terminals: 3;
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MMBT3904-7-F
Diodes Incorporated
Diodes Inc. MMBT3904-7-F is a NPN BJT transistor for switching applications. Features include VCEsat of 0.3V, hFE of 30, and IC of 0.2A. With a max operating temp of 150°C, it's ideal for small outline SMT designs in automotive electronics.
LM317T
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; JESD-609 Code: e0; Terminal Position: SINGLE; Adjustability: ADJUSTABLE; Maximum Load Regulation (%): 1.5 %;
BAV99
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Telefunken Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
New England Semiconductor
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
AH180-WG-7
AH180-WG-7 by Diodes Inc. is a magnetic field sensor with 1.5mT hysteresis, 0.30V output range, and 9mA max operating current. Ideal for applications requiring non-inverting analog voltage output in a compact rectangular package suitable for surface mount installations.
5-1634552-1
TE Connectivity
TE Connectivity 5-1634552-1 RF Connector features threaded coupling, polymethylpentene insulator, and 75 ohm impedance. Ideal for commercial applications with a frequency up to 2 GHz, operating temperature range of -55 to 85°C, and durability of 50 cycles.
M49142/08-0006
Winchester Interconnect
M49142/08-0006 by Winchester Interconnect is a MIL-conformant RF connector with threaded coupling, gold contact finish, and PTFE insulator. It is a plug-type connector for cable mounting in straight orientation, ideal for high-frequency applications requiring secure connections.
R222900310
Radiall S A
The Radiall S A R222900310 RF SMP CONNECTOR features a 0.13" body diameter, 0.264" body depth, and 5000000000 ohm insulation resistance. Ideal for RG-196 cable types, it operates at frequencies up to 12.4 GHz with a voltage standing wave ratio of 1.25. This female COAX connector is designed for commercial applications requiring high durability and reliability in temperatures ranging from -55°C to 125°C.
MM4829-2702
Murata Manufacturing
Murata Manufacturing's MM4829-2702 RF CONNECTOR has a Voltage Standing Wave Ratio of 1.3, operating up to 6 GHz. With SNAP coupling and 50 ohm impedance, it is ideal for BOARD mounting in high-frequency applications.
82_MMBX-S50-0-13/111_NM
Huber+suhner Ag
82_MMBX-S50-0-13/111_NM RF connector by Huber+suhner Ag features a body length of 0.232", gold termination finish, and a max operating frequency of 12.4 GHz. It is designed for applications requiring a 50 ohm characteristic impedance, such as high-frequency communication systems or test equipment setups.
SF1621-60048-1S
Sv Microwave
SF1621-60048-1S by Sv Microwave is a threaded RF connector with 50 ohm impedance, suitable for panel mount applications. Featuring polyetherimide insulator and stainless steel shell, it operates b/w -65 to 165 °C at frequencies up to 50 GHz. Ideal for board and panel mounting, this female jack connector has a 0.357" body depth.
R317.072.000
R317.072.000 by Radiall S A is a RF connector with BAYONET coupling, suitable for 2 GHz applications. Features include POLYTETRAFLUOROETHYLENE insulator, NICKEL finish, and 50 ohm impedance. Ideal for high-frequency communication systems requiring a max operating temperature of 165 °C and VSWR of 1.8.
90001
Lapp Group Pvt
RF CONNECTOR; Body or Shell Style: PLUG; Manufacturer Series: Y92; IEC Conformity: NO; DIN Conformance: NO; MIL Conformity: NO;
ERN.00.250.CTL
Lemo Usa
ERN.00.250.CTL by Lemo Usa is a panel mount RF F CONNECTOR with 0.315" body diameter and 0.22" body depth. Featuring SNAP coupling, POLYTETRAFLUOROETHYLENE insulator, and 50 ohm impedance, it's ideal for applications requiring a max operating frequency of 1.5 GHz.
908-NM43200
Amphenol
Amphenol's 908-NM43200 RF connector features a dielectric voltage of 700VAC, gold contact finish, and a max operating frequency of 6 GHz. Ideal for commercial applications requiring a durable, 50 ohm coaxial plug with right-angle mounting and crimp termination on RD-178 cable types.
331-0472-260
Hirose Electric
OTHER RF CONNECTOR;
19S102-40ML5
Rosenberger Hochfrequenztechnik & Kg
19S102-40ML5 RF SMP connector by Rosenberger features 0.63 dB insertion loss, 1.5 VSWR, and operates up to 40 GHz. With MIL conformity, GOLD finish, and SNAP coupling, it is ideal for high-frequency applications requiring a characteristic impedance of 50 ohm.
1058574-1
TE Connectivity's 1058574-1 RF Connector features a 0.25" body diameter, 0.39" body depth, and 0.13 dB insertion loss. With a max operating frequency of 18 GHz, it is ideal for applications requiring a 50 ohm characteristic impedance and panel mounting in high-frequency environments.
BJ72
Vertiv
RF TRB CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Maximum Operating Frequency: .5 GHz; Termination Type: SOLDER; No. of Ports: 1;
U.FL-R-SMT
U.FL-R-SMT by Hirose Electric is a RF connector with 50 ohm impedance, suitable for commercial applications up to 6 GHz frequency. It features liquid crystal polymer insulation, surface mount termination, and silver shell finish. Ideal for board mounting in various electronic devices requiring reliable RF connections.
MS-147(01)
The Hirose Electric MS-147(01) RF connector features a body length of 0.228", insertion loss of 0.8 dB, and dielectric voltage withstand of 100VAC. Ideal for board mounting applications in commercial settings, this female jack connector has a characteristic impedance of 50 ohm and operates up to 6 GHz with gold termination finish.
142-1002-0001
TE Connectivity 142-1002-0001 RF Connector features GOLD finish, POLYTETRAFLUOROETHYLENE insulator, and 50 ohm impedance. Ideal for applications requiring a right angle plug with slide-on coupling, suitable for up to 2 GHz frequency operations.
1049081-2
TE Connectivity's 1049081-2 RF Connector features a 0.24" body diameter, 0.57" body depth, and 0.169 dB insertion loss. With a max operating frequency of 18 GHz, it is ideal for panel mount applications in high-frequency environments requiring a characteristic impedance of 50 ohm. The connector's snap coupling type and gold shell finish make it suitable for use in various RF communication systems.
119S101-40ML5
119S101-40ML5 RF connector by Rosenberger features 0.09 dB insertion loss, gold termination contact finish, and SNAP coupling type. With a max operating frequency of 10 GHz, it is ideal for applications requiring a 50 ohm characteristic impedance in high-frequency environments. Suitable for use in boards with surface mount termination.
25-146-1000-92
RF CONNECTOR;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Molex
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved